Solar cell shading or the failure of several photocells changes the output current-voltage characteristic. This paper discusses an algorithm for approaching and searching the maximum power generated on board the spacecraft, which is all-important for fast charging of the secondary sources of electrical energy since the time spent on the sunny side in low orbits are limited by time. Currently, algorithms for finding maximum power work in idealcases, and simple and effective algorithms are needed in cases of solar panel shading or failure of photocell/cells. In this paper, a simulation of a solar panel in various conditions is carried out. An algorithm for constructing the output volt ampere characteristics of a solar cell and a solar panel is implemented. Experiments of various algorithms on real devices have also been carried out.
{"title":"LGORITHM FOR FINDING MAXIMUM POWER POINT TRACKING WHEN SHADOWING OR FAILURE OF SOLAR PANELPHOTO CELLS ON SATELLITES USING LOW ORBITS","authors":"A. Syzdykov","doi":"10.31489/2023no1/65-72","DOIUrl":"https://doi.org/10.31489/2023no1/65-72","url":null,"abstract":"Solar cell shading or the failure of several photocells changes the output current-voltage characteristic. This paper discusses an algorithm for approaching and searching the maximum power generated on board the spacecraft, which is all-important for fast charging of the secondary sources of electrical energy since the time spent on the sunny side in low orbits are limited by time. Currently, algorithms for finding maximum power work in idealcases, and simple and effective algorithms are needed in cases of solar panel shading or failure of photocell/cells. In this paper, a simulation of a solar panel in various conditions is carried out. An algorithm for constructing the output volt ampere characteristics of a solar cell and a solar panel is implemented. Experiments of various algorithms on real devices have also been carried out.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45965619","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The measuring the temperature dependence of the initial permeability was used to study the features of phase and structural transformations in lithium-titanium ferrites as a function of time, heating and cooling rates, and the temperature of liquid-phase sintering under thermal and radiation-thermal heating. Ferrite was synthesized from powder mixture by solid-phase synthesis. A low-melting additive bismuth dioxide was used to obtain the ferrite ceramics by liquid-phase sintering. RT sintering was carried out by heating the samples with a pulsed (1.5–2.0) MeV electron beam. It was established that the additive leads to a less defective state of sintered ferrites, while the action of radiation enhances this effect in the early stages of sintering. The regularities of the influence of the heating and cooling rates of compacted samples on the change in the initial magnetic permeability of sintered ferrites are established.
{"title":"TUDY OF THE INITIAL MAGNETIC PERMEABILITY OF LiTiZnMnFERRITES OBTAINED BY LIQUID-PHASE SINTERING UNDER RADIATION-THERMAL AND THERMAL CONDITIONS","authors":"A. Surzhikov","doi":"10.31489/2023no1/12-19","DOIUrl":"https://doi.org/10.31489/2023no1/12-19","url":null,"abstract":"The measuring the temperature dependence of the initial permeability was used to study the features of phase and structural transformations in lithium-titanium ferrites as a function of time, heating and cooling rates, and the temperature of liquid-phase sintering under thermal and radiation-thermal heating. Ferrite was synthesized from powder mixture by solid-phase synthesis. A low-melting additive bismuth dioxide was used to obtain the ferrite ceramics by liquid-phase sintering. RT sintering was carried out by heating the samples with a pulsed (1.5–2.0) MeV electron beam. It was established that the additive leads to a less defective state of sintered ferrites, while the action of radiation enhances this effect in the early stages of sintering. The regularities of the influence of the heating and cooling rates of compacted samples on the change in the initial magnetic permeability of sintered ferrites are established.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49605778","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The article is devoted to forecasting of heat-shielding and mechanical properties of composite materials based on porous fillers.Analytical dependencies for determining the thermal conductivity coefficient of materials of homogeneous and heterogeneous structure are given. Based on the finite element method, there has been developed a method for numerical determination of the thermal conductivity coefficient of composite materials with a variotropic structure.The results of computer studies are in line with the dependences obtained on analytical models. The expediency of using multilayer composite materials based on porous fillers in load-bearing and enclosing structures of shell and plate types has been shown.
{"title":"COMPUTER MODELING OF PROPERTIES OF A COMPOSITE MATERIAL WITH POROUS FILLERS","authors":"O. Miryuk","doi":"10.31489/2023no1/56-64","DOIUrl":"https://doi.org/10.31489/2023no1/56-64","url":null,"abstract":"The article is devoted to forecasting of heat-shielding and mechanical properties of composite materials based on porous fillers.Analytical dependencies for determining the thermal conductivity coefficient of materials of homogeneous and heterogeneous structure are given. Based on the finite element method, there has been developed a method for numerical determination of the thermal conductivity coefficient of composite materials with a variotropic structure.The results of computer studies are in line with the dependences obtained on analytical models. The expediency of using multilayer composite materials based on porous fillers in load-bearing and enclosing structures of shell and plate types has been shown.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43292655","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The article presents an overview of modern problems in studiesof Extensive Air Showers and works devoted to their investigation. It is demonstrated that over the past decade convincing evidence of the presence of a neutron component has beendemonstrated. When designing experimental facilities aimed at studying the nature of cosmic rays, this must be taken into account, since fast neutrons that arise outside the working volume can adversely affect the interpretation of the obtained data. In particular,if one tries to reveal the nature of penetrating component this effect is at most importance. Studies of biological shielding for thehigh flux research reactorPIKreactor at the Kurchatov Institute have shown that effective shielding from such neutrons can be provided by polyethylene in combination with borated rubber. At the same time, the use of boron-containing polyethylene does not lead to a significant improvement in protection, however, it significantly increases its cost. Based on foregoing, a modification of the hadron calorimeter protection is proposed to improve its protection it from the influence of the fast neutrons.
{"title":"PROJECT FOR MODIFYING THE SETUP FOR ADRON-55 TO IMPROVEITSBACKGROUND CHARACTERISTICS AND A REVIEW OF UNSOLVED PROBLEMS IN STUDIES OF EXTENSIVE AIR SHOWERS","authors":"T. Sadykov","doi":"10.31489/2023no1/73-79","DOIUrl":"https://doi.org/10.31489/2023no1/73-79","url":null,"abstract":"The article presents an overview of modern problems in studiesof Extensive Air Showers and works devoted to their investigation. It is demonstrated that over the past decade convincing evidence of the presence of a neutron component has beendemonstrated. When designing experimental facilities aimed at studying the nature of cosmic rays, this must be taken into account, since fast neutrons that arise outside the working volume can adversely affect the interpretation of the obtained data. In particular,if one tries to reveal the nature of penetrating component this effect is at most importance. Studies of biological shielding for thehigh flux research reactorPIKreactor at the Kurchatov Institute have shown that effective shielding from such neutrons can be provided by polyethylene in combination with borated rubber. At the same time, the use of boron-containing polyethylene does not lead to a significant improvement in protection, however, it significantly increases its cost. Based on foregoing, a modification of the hadron calorimeter protection is proposed to improve its protection it from the influence of the fast neutrons.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45813103","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In this work, the effect of molybdenum disulfidenanoparticles on the properties zinc oxideelectron transport layer of organic solar cells is studied. molybdenum disulfidenanoparticles were obtained by laser ablation of MoS2 powder in isopropyl alcohol. To form composite films, nanoparticles were added to a sol–gel zinc oxidesolution with different concentrations.According to scanning electron microscope study, as the concentration of nanoparticles in the film increases, the thickness of the molybdenum disulfidelayer on the zinc oxide surface changes. molybdenum disulfidenanoparticles in the film structure gradually fill the bulk and surface voids inzinc oxide. However, when the concentration exceeds 1%, holes and voids are formed in the film. The absorption spectra of composite films showed that as the concentration of nanoparticles in the film increases, the absorption intensity enhances due to theincrease of the overall thickness. At the same time, zinc oxideoptical band gap width doesnot change, which means the molybdenum disulfidenanoparticles do not affect the electronic structure of zinc oxide. It was shown that the observed changes in the volt-ampere characteristicof organic solar cells with composite films electron transport layer composite films was associated with the influence of molybdenum disulfidenanoparticles on electron transport in organic solar cells.According to impedance spectroscopy study, it was found that molybdenum disulfidenanoparticles at concentration below critical value increases the lifetime of charge carriers and the diffusion coefficient in composite film.
{"title":"THE EFFECT OF MOLYBDENUM DISULFIDENANOPARTICLES ON THE PROPERTIES ZINC OXIDE ELECTRON TRANSPORT LAYER OF ORGANIC SOLAR CELLS","authors":"A. Aimukhanov","doi":"10.31489/2023no1/20-26","DOIUrl":"https://doi.org/10.31489/2023no1/20-26","url":null,"abstract":"In this work, the effect of molybdenum disulfidenanoparticles on the properties zinc oxideelectron transport layer of organic solar cells is studied. molybdenum disulfidenanoparticles were obtained by laser ablation of MoS2 powder in isopropyl alcohol. To form composite films, nanoparticles were added to a sol–gel zinc oxidesolution with different concentrations.According to scanning electron microscope study, as the concentration of nanoparticles in the film increases, the thickness of the molybdenum disulfidelayer on the zinc oxide surface changes. molybdenum disulfidenanoparticles in the film structure gradually fill the bulk and surface voids inzinc oxide. However, when the concentration exceeds 1%, holes and voids are formed in the film. The absorption spectra of composite films showed that as the concentration of nanoparticles in the film increases, the absorption intensity enhances due to theincrease of the overall thickness. At the same time, zinc oxideoptical band gap width doesnot change, which means the molybdenum disulfidenanoparticles do not affect the electronic structure of zinc oxide. It was shown that the observed changes in the volt-ampere characteristicof organic solar cells with composite films electron transport layer composite films was associated with the influence of molybdenum disulfidenanoparticles on electron transport in organic solar cells.According to impedance spectroscopy study, it was found that molybdenum disulfidenanoparticles at concentration below critical value increases the lifetime of charge carriers and the diffusion coefficient in composite film.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47975714","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The aim of this paper is to evaluate the influence of the processes of radiation-induced damage formation in the form of point defects, dislocations and vacancies, as well as their accumulation and the formation of locally disorderedregions in the near-surface layer of zirconia ceramics under irradiation with heavy Xe22+ions with an energy of 230 MeV, on the change in the thermophysical properties of ceramics. The choice of the ion type for irradiation is due to the possibilities ofmodeling radiation damage processes comparable to the impact of uranium nuclei fission fragments during nuclear reactions in nuclear fuel. The choice of materials for irradiation in the form of ZrO2ceramics is due to the prospects for their use as the main material for inert matrices of dispersed nuclear fuel for new generation reactors. This choice is due to the physicochemical, thermophysical and strength properties of ZrO2ceramics, which are more resistant than other types of oxide ceramics. During research, it was found that the formation of isolated locally heterogeneous regions at low irradiation fluences does not lead to significant changes in the thermophysical properties of the damaged ceramic layer. However, polymorphic transformations of the t-ZrO2 → c-ZrO2type, which occur at irradiation fluences above 1012ion/cm2, lead to a decrease in thermal conductivity and the appearance of heat losses associated with the disruption of the phonon heat transfer mechanisms in the damaged layer.
{"title":"Study of the influence of radiation-induced damage accumulation during the interaction of heavy Xe22+ ions on changes in the thermophysical parameters of zirconia ceramics","authors":"A.L. A.L. Kozlovskiy","doi":"10.31489/2023no1/5-11","DOIUrl":"https://doi.org/10.31489/2023no1/5-11","url":null,"abstract":"The aim of this paper is to evaluate the influence of the processes of radiation-induced damage formation in the form of point defects, dislocations and vacancies, as well as their accumulation and the formation of locally disorderedregions in the near-surface layer of zirconia ceramics under irradiation with heavy Xe22+ions with an energy of 230 MeV, on the change in the thermophysical properties of ceramics. The choice of the ion type for irradiation is due to the possibilities ofmodeling radiation damage processes comparable to the impact of uranium nuclei fission fragments during nuclear reactions in nuclear fuel. The choice of materials for irradiation in the form of ZrO2ceramics is due to the prospects for their use as the main material for inert matrices of dispersed nuclear fuel for new generation reactors. This choice is due to the physicochemical, thermophysical and strength properties of ZrO2ceramics, which are more resistant than other types of oxide ceramics. During research, it was found that the formation of isolated locally heterogeneous regions at low irradiation fluences does not lead to significant changes in the thermophysical properties of the damaged ceramic layer. However, polymorphic transformations of the t-ZrO2 → c-ZrO2type, which occur at irradiation fluences above 1012ion/cm2, lead to a decrease in thermal conductivity and the appearance of heat losses associated with the disruption of the phonon heat transfer mechanisms in the damaged layer.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48134754","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The paper discusses the results of experimental studies of the influence of the degree of inhomogeneity of a liquid flow on the dynamics of heat and mass transfer processes under pulsed impacts. High-voltage electric discharges in a liquid medium were used as impulse actions, through which an electro-hydraulic effect is realized, accompanied by the appearance of shock waves. The dynamics ofthe occurring nonlinear, rapidly changing heat and mass transfer processes at high hydraulic pressures cannot be described using differential equations. The simulation was carried out on the basis of the method of group consideration of arguments, the advantage of which is the construction of polynomial dependencies using a small amount of experimental data. The results of constructing polynomial dependences made it possible to reveal the synergistic effect of the influence of flow parameters on the dynamics of the impulse pressure amplitude and the intensity of heat transfer.
{"title":"MODELING THE DYNAMICS OF HEAT AND MASS TRANSFER PROCESSES IN A TUBULAR HEAT EXCHANGER UNDER PULSED INFLUENCES","authors":"S. Sakipova","doi":"10.31489/2023no1/51-55","DOIUrl":"https://doi.org/10.31489/2023no1/51-55","url":null,"abstract":"The paper discusses the results of experimental studies of the influence of the degree of inhomogeneity of a liquid flow on the dynamics of heat and mass transfer processes under pulsed impacts. High-voltage electric discharges in a liquid medium were used as impulse actions, through which an electro-hydraulic effect is realized, accompanied by the appearance of shock waves. The dynamics ofthe occurring nonlinear, rapidly changing heat and mass transfer processes at high hydraulic pressures cannot be described using differential equations. The simulation was carried out on the basis of the method of group consideration of arguments, the advantage of which is the construction of polynomial dependencies using a small amount of experimental data. The results of constructing polynomial dependences made it possible to reveal the synergistic effect of the influence of flow parameters on the dynamics of the impulse pressure amplitude and the intensity of heat transfer.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47457156","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The results of experiments on obtaining calcium-phosphate coatings on substrates of titanium grade VT1-0 by micro-arc oxidation (MAO) are presented. The coatings were obtained by adding different amounts of titanium oxide nanoparticles to the electrolyte. The microstructure and tribological properties of calcium phosphate coatings were investigated. In conducted research results have been established and determined optimal modes and parameters for obtaining calcium phosphate coatings. It is shown that the addition of titanium oxide nanoparticles to the electrolyte can affect the structure also the strength of the obtained coatings. The research results led to conclude that such treatment of MAO from titanium alloys is promising to improve their splices with bone tissue.
{"title":"BTAINING OF CALCIUM-PHOSPHATE COATINGS ON THE TITANIUM SURFACE BY MICRO-ARC OXIDATION","authors":"D. Baizhan","doi":"10.31489/2023no1/34-41","DOIUrl":"https://doi.org/10.31489/2023no1/34-41","url":null,"abstract":"The results of experiments on obtaining calcium-phosphate coatings on substrates of titanium grade VT1-0 by micro-arc oxidation (MAO) are presented. The coatings were obtained by adding different amounts of titanium oxide nanoparticles to the electrolyte. The microstructure and tribological properties of calcium phosphate coatings were investigated. In conducted research results have been established and determined optimal modes and parameters for obtaining calcium phosphate coatings. It is shown that the addition of titanium oxide nanoparticles to the electrolyte can affect the structure also the strength of the obtained coatings. The research results led to conclude that such treatment of MAO from titanium alloys is promising to improve their splices with bone tissue.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46728342","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
One of the most crucial methods for preserving agricultural produce is solar drying. The major focus of this paper is increasing solar drying systems' effectiveness. The development of new methods and variables that may have an impact on the functionality of solar dryers aids in enhancing their efficiency. An indirect-type solar dryer for drying agricultural products is proposed and developed in this study. A dryer consisting of a solar flat plate air collector, an insulated drying chamber, an auxiliary (electric) heat source, and an electric fan is constructed to improve the dryer's performance. The dryer's most typical function is to blow hot air at the product, forcing the water in it to evaporate. The effect of air temperature and velocity on evaporation rate has been studied experimentally. Tests with three different airflow rates—0.042, 0.0735, and 0.105 m3/s—are conducted. When there is little or no solar radiation, an auxiliary heater is used to provide sufficient heat. For varying airflow rates, solar mode and electrical mode were tested experimentally with only one energy source in each mode. The findings revealed that using a different heat source in addition to solar radiation will allow you to keep the air temperature in the drying chamber between 32oCand 42oC. Also, it was found that for the whole drying process at high air velocities, the temperature had less influence on the dryer's performance.
{"title":"PERFORMANCE IMPROVEMENTOF SOLAR DRYER USINGAN AUXILIARY HEAT SOURCE UNDER DIFFERENT VALUES OF AIRFLOW RATES","authors":"L.A. Alkahdery","doi":"10.31489/2023no1/42-50","DOIUrl":"https://doi.org/10.31489/2023no1/42-50","url":null,"abstract":"One of the most crucial methods for preserving agricultural produce is solar drying. The major focus of this paper is increasing solar drying systems' effectiveness. The development of new methods and variables that may have an impact on the functionality of solar dryers aids in enhancing their efficiency. An indirect-type solar dryer for drying agricultural products is proposed and developed in this study. A dryer consisting of a solar flat plate air collector, an insulated drying chamber, an auxiliary (electric) heat source, and an electric fan is constructed to improve the dryer's performance. The dryer's most typical function is to blow hot air at the product, forcing the water in it to evaporate. The effect of air temperature and velocity on evaporation rate has been studied experimentally. Tests with three different airflow rates—0.042, 0.0735, and 0.105 m3/s—are conducted. When there is little or no solar radiation, an auxiliary heater is used to provide sufficient heat. For varying airflow rates, solar mode and electrical mode were tested experimentally with only one energy source in each mode. The findings revealed that using a different heat source in addition to solar radiation will allow you to keep the air temperature in the drying chamber between 32oCand 42oC. Also, it was found that for the whole drying process at high air velocities, the temperature had less influence on the dryer's performance.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46974005","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In this work, the regularities of the change in the shear strength of the adhesive bond τ0and the piezoelectric coefficient β in the metal systems "12Kh2N4 (45KhN2MFA) -steel 45 + B", "12Kh2N4 (45KhN2MFA) -steel 45 + VS" were obtained during physical modeling of the shear of surfaces of small-sized samples and changes in dynamic viscosity environment of their interaction with the use of additional equipment of the SMTs-2 friction machine. It has been established that boridingand boron carburizing of the surface of steel 45 leads to the absence of adhesion to the surfaces of steels 12Kh2N4 and 45KhN2MFA in certain ranges of normal pressures, at which τ0> 0 and the dynamic viscosity of liquid and grease. It was found that the parameter τ0when lubricating surfaces is determined to a greater extent for the system "12X2H4 -steel 45", and partially for borating steel 45 and low values of dynamic viscosity μ = 0.027 Pa•s. With an increase in the dynamic viscosity of the liquid phase of the lubricant in the "12X2H4 -steel 45" system, there is a tendency to an increase inthe value of τ0. It was found that the absence of modification of steel 45 with boron and boron carbide predetermines the independence of the piezoelectric coefficient from the viscosity of the liquid lubricant and the shear rate. Вoridingand boron carburizing steel 45 predetermines an increase in the piezoelectric coefficient by an average of 1.6 times with an increase in dynamic viscosity from 0.027 Pa•s to 0.19 Pa•s at a shear rate of 10.16±0.8. At shear rate = 5.08±0.6 mm/s, the piezoelectric coefficient is relatively constant in the systems under study. With the transition to contact through a grease lubricant, there is an ambiguous manifestation of the rate of change of the piezoelectric coefficient
{"title":"YNAMIC VISCOSITY OF THE LUBRICANT AND ITS EFFECT ON STEEL MATERIALS WITH BORON","authors":"V. Kubich","doi":"10.31489/2023no1/27-33","DOIUrl":"https://doi.org/10.31489/2023no1/27-33","url":null,"abstract":"In this work, the regularities of the change in the shear strength of the adhesive bond τ0and the piezoelectric coefficient β in the metal systems \"12Kh2N4 (45KhN2MFA) -steel 45 + B\", \"12Kh2N4 (45KhN2MFA) -steel 45 + VS\" were obtained during physical modeling of the shear of surfaces of small-sized samples and changes in dynamic viscosity environment of their interaction with the use of additional equipment of the SMTs-2 friction machine. It has been established that boridingand boron carburizing of the surface of steel 45 leads to the absence of adhesion to the surfaces of steels 12Kh2N4 and 45KhN2MFA in certain ranges of normal pressures, at which τ0> 0 and the dynamic viscosity of liquid and grease. It was found that the parameter τ0when lubricating surfaces is determined to a greater extent for the system \"12X2H4 -steel 45\", and partially for borating steel 45 and low values of dynamic viscosity μ = 0.027 Pa•s. With an increase in the dynamic viscosity of the liquid phase of the lubricant in the \"12X2H4 -steel 45\" system, there is a tendency to an increase inthe value of τ0. It was found that the absence of modification of steel 45 with boron and boron carbide predetermines the independence of the piezoelectric coefficient from the viscosity of the liquid lubricant and the shear rate. Вoridingand boron carburizing steel 45 predetermines an increase in the piezoelectric coefficient by an average of 1.6 times with an increase in dynamic viscosity from 0.027 Pa•s to 0.19 Pa•s at a shear rate of 10.16±0.8. At shear rate = 5.08±0.6 mm/s, the piezoelectric coefficient is relatively constant in the systems under study. With the transition to contact through a grease lubricant, there is an ambiguous manifestation of the rate of change of the piezoelectric coefficient","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44736732","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：