Pub Date : 2023-01-01DOI: 10.15240/tul/008/2023-3-005
B. Sobandi, Hery Supiarza, S. Gunara, W. Gunawan, Hafiz Hamdani
Waste pollution resulting from the production process of synthetic batik dyes is against the Sustainable Development Goals (SDGs) in the aspects of waste management systems and clean water. One effort to cut down the amount of pollution is the use of natural dyes for coloring batik clothes. This undertaking is not only healthy but also expected to bring in some added value economically, community empowerment, and intergenerational inheritance. This experimental research was carried out collaboratively between the Textile and Batik Craft Studio at the Indonesian University of Education, the Umymay Batik Studio, and the Yogyakarta Batik and Craft Center. A batik cloth was dyed 5 times with a mango seed extract solution as the dependent variable, then fixed with lime solution (Ca(OH)2) and Ferrous Sulfate solution (FeSO4.7H2O) as the independent variables. The dyed fabrics were tested for their colorfastness against washing and sun exposure. The results of the study: 1) The process of dyeing the batik cloth was performed through several stages, that is, by cutting the cloth with a canting stamp, dyeing the cloth, and fixing it with Ca(OH)2 and FeSO4.7H2O, the batik cloth fixed with Ca(OH)2 tended to be brown in color while the other one fixed with FeSO4.7H2O resulted in black; 2) The results of the Color Fastness Test against Washing at 40℃ on the batik cloth that has been dyed with mango seed extract fixed with Ca(OH)2 and FeSO4.7H2O were considered a good category with respective values of 4 on a scale of 5. Likewise, the results of the Color Resistance to Light: Day Light Ray Resistant Test Value with the fixation of Ca(OH)2 and FeSO4.7H2O was in the moderate category with a value of 3 each on a scale of 5. There should be a governmental policy to promote a green industry. As for batik artisans, they can utilize an eco-friendly alternative dye for batik clothes.
{"title":"AN ECO-FRIENDLY DYE FOR BATIK CLOTHES: A NATURAL DYE SOLUTION MADE OF MANGO SEEDS EXTRACT (Mangifera indica L.)","authors":"B. Sobandi, Hery Supiarza, S. Gunara, W. Gunawan, Hafiz Hamdani","doi":"10.15240/tul/008/2023-3-005","DOIUrl":"https://doi.org/10.15240/tul/008/2023-3-005","url":null,"abstract":"Waste pollution resulting from the production process of synthetic batik dyes is against the Sustainable Development Goals (SDGs) in the aspects of waste management systems and clean water. One effort to cut down the amount of pollution is the use of natural dyes for coloring batik clothes. This undertaking is not only healthy but also expected to bring in some added value economically, community empowerment, and intergenerational inheritance. This experimental research was carried out collaboratively between the Textile and Batik Craft Studio at the Indonesian University of Education, the Umymay Batik Studio, and the Yogyakarta Batik and Craft Center. A batik cloth was dyed 5 times with a mango seed extract solution as the dependent variable, then fixed with lime solution (Ca(OH)2) and Ferrous Sulfate solution (FeSO4.7H2O) as the independent variables. The dyed fabrics were tested for their colorfastness against washing and sun exposure. The results of the study: 1) The process of dyeing the batik cloth was performed through several stages, that is, by cutting the cloth with a canting stamp, dyeing the cloth, and fixing it with Ca(OH)2 and FeSO4.7H2O, the batik cloth fixed with Ca(OH)2 tended to be brown in color while the other one fixed with FeSO4.7H2O resulted in black; 2) The results of the Color Fastness Test against Washing at 40℃ on the batik cloth that has been dyed with mango seed extract fixed with Ca(OH)2 and FeSO4.7H2O were considered a good category with respective values of 4 on a scale of 5. Likewise, the results of the Color Resistance to Light: Day Light Ray Resistant Test Value with the fixation of Ca(OH)2 and FeSO4.7H2O was in the moderate category with a value of 3 each on a scale of 5. There should be a governmental policy to promote a green industry. As for batik artisans, they can utilize an eco-friendly alternative dye for batik clothes.","PeriodicalId":12123,"journal":{"name":"Fibres and Textiles in Eastern Europe","volume":"34 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89852962","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.15240/tul/008/2023-3-003
Dmytro Prybeha, Julia Koshevko, M. Skyba, S. Kuleshova, Oleg Synyuk, Volodymyr Onofriichuk
The article presents the next stage of experimental studies applying images to textile materials. The method of calculating the cost of manufacturing thermal transfer according to the proposed technologies, which were obtained as a result of the practical activity of the authors of the article in production conditions, was tested. The operational, and functional properties of thermal transfers have been studied. Durability of printed fabrics to rubbing and washing has been established. The images were applied to synthetic and natural fabrics. The methods of printing were as follows: DTF printing, offset and screen printing. The application of the results of this study will allow to carry out a qualitative and effective assessment of methods of printing images on textile materials depending on the production conditions for each type of product. A practical test of the proposed method of printing images on the products of the author's collection of women's clothing was carried out.
{"title":"INVESTIGATION OF THE RESISTANCE OF DIFFERENT TEXTILE PRINTS TO WASHING AND ABRASION","authors":"Dmytro Prybeha, Julia Koshevko, M. Skyba, S. Kuleshova, Oleg Synyuk, Volodymyr Onofriichuk","doi":"10.15240/tul/008/2023-3-003","DOIUrl":"https://doi.org/10.15240/tul/008/2023-3-003","url":null,"abstract":"The article presents the next stage of experimental studies applying images to textile materials. The method of calculating the cost of manufacturing thermal transfer according to the proposed technologies, which were obtained as a result of the practical activity of the authors of the article in production conditions, was tested. The operational, and functional properties of thermal transfers have been studied. Durability of printed fabrics to rubbing and washing has been established. The images were applied to synthetic and natural fabrics. The methods of printing were as follows: DTF printing, offset and screen printing. The application of the results of this study will allow to carry out a qualitative and effective assessment of methods of printing images on textile materials depending on the production conditions for each type of product. A practical test of the proposed method of printing images on the products of the author's collection of women's clothing was carried out.","PeriodicalId":12123,"journal":{"name":"Fibres and Textiles in Eastern Europe","volume":"64 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89935040","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.15240/tul/008/2023-1-007
Haisang Liu, Y. Kyosev, G. Jiang
The yarn level modelling of warp knitted structures is a complex process. For structures placed on the plane, it is well investigated and there are a few software solutions and papers reported. This paper considers the simulation of warp knitted structure, deformed in the 3D space. Especially the modelling of the areas of high curvature are detailed observed. Underlaps with longer lengths makes an unreal visualization for simulation results. Different pattern with different length of the underlaps are modelled with original algorithm developed by the authors. Modelling and visualization problems in the areas with long underlaps are discussed and possible solutions are proposed.
{"title":"PATTERN RELATED ISSUES IN THE MODELLING OF DEFORMED OVER SURFACE WARP KNITTED STRUCTURES WITH LONGER UNDERLAPS","authors":"Haisang Liu, Y. Kyosev, G. Jiang","doi":"10.15240/tul/008/2023-1-007","DOIUrl":"https://doi.org/10.15240/tul/008/2023-1-007","url":null,"abstract":"The yarn level modelling of warp knitted structures is a complex process. For structures placed on the plane, it is well investigated and there are a few software solutions and papers reported. This paper considers the simulation of warp knitted structure, deformed in the 3D space. Especially the modelling of the areas of high curvature are detailed observed. Underlaps with longer lengths makes an unreal visualization for simulation results. Different pattern with different length of the underlaps are modelled with original algorithm developed by the authors. Modelling and visualization problems in the areas with long underlaps are discussed and possible solutions are proposed.","PeriodicalId":12123,"journal":{"name":"Fibres and Textiles in Eastern Europe","volume":"40 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90636389","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.15240/tul/008/2023-1-013
Handan Palak, B. K. Kayaoğlu
In this study, morphological, chemical and thermal characteristics of biobased and biodegradable anthocyanin-loaded polylactide (PLA) nanofibrous membranes were investigated. To prepare electrospinning solutions, PLA was dissolved at a concentration of 10% (wv-1) in a solvent system of chloroform/dimethylformamide (75/25% vv-1), and anthocyanin at different concentrations (1, 2, and 3% wv−1) was added into the polymer solutions. The prepared solutions were electrospun by using a single syringe electrospinning setup. The morphological, chemical and thermal structure of the neat and anthocyanin-loaded PLA nanofibrous membranes were characterized via Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR), and Differential Scanning Calorimetry (DSC), respectively. The FT-IR spectra proved the incorporation of anthocyanin into nanofibrous membranes successfully. It was observed that when anthocyanin was added into the polymer solution; bead-free nanofibers were produced, and when the concentration of anthocyanin was increased, mean fiber diameter increased as well. In addition, anthocyanin loading did not affect the crystallization behavior of PLA; however, the glass transition temperature (Tg) of the nanofibrous membranes including no anthocyanin in the structure was higher than those of the other membranes including anthocyanin.
{"title":"FABRICATION AND CHARACTERIZATION OF ELECTROSPUN ANTHOCYANIN-LOADED POLYLACTIDE NANOFIBERS","authors":"Handan Palak, B. K. Kayaoğlu","doi":"10.15240/tul/008/2023-1-013","DOIUrl":"https://doi.org/10.15240/tul/008/2023-1-013","url":null,"abstract":"In this study, morphological, chemical and thermal characteristics of biobased and biodegradable anthocyanin-loaded polylactide (PLA) nanofibrous membranes were investigated. To prepare electrospinning solutions, PLA was dissolved at a concentration of 10% (wv-1) in a solvent system of chloroform/dimethylformamide (75/25% vv-1), and anthocyanin at different concentrations (1, 2, and 3% wv−1) was added into the polymer solutions. The prepared solutions were electrospun by using a single syringe electrospinning setup. The morphological, chemical and thermal structure of the neat and anthocyanin-loaded PLA nanofibrous membranes were characterized via Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR), and Differential Scanning Calorimetry (DSC), respectively. The FT-IR spectra proved the incorporation of anthocyanin into nanofibrous membranes successfully. It was observed that when anthocyanin was added into the polymer solution; bead-free nanofibers were produced, and when the concentration of anthocyanin was increased, mean fiber diameter increased as well. In addition, anthocyanin loading did not affect the crystallization behavior of PLA; however, the glass transition temperature (Tg) of the nanofibrous membranes including no anthocyanin in the structure was higher than those of the other membranes including anthocyanin.","PeriodicalId":12123,"journal":{"name":"Fibres and Textiles in Eastern Europe","volume":"34 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82447610","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.15240/tul/008/2023-1-023
M. Boguń, K. Śledzińska, Małgorzata Giełdowska, P. Król, I. Kamińska, Sylwia Magdziarz
The influence of the change in surface weight on the physical properties of oxidized polyacrylonitrile precursor nonwovens intended for the production of carbon materials used in tissue engineering was studied. Thermal insulation properties of the nonwovens and their behavior during incubation in phosphate buffered saline (PBS) were investigated. Initial carbonization tests showed that from the point of view of carbonization and further application of carbon materials, the most effective was the use of a surface weight of about 120 g/m2. At the same time, for the research conducted on the incubation of nonwovens in PBS, no significant change in the pH of the solution was found.
{"title":"POLYACRYLONITRILE NONWOVENS FOR THE PRODUCTION OF CARBON MATERIALS SUPPORTING THE REGENERATION OF BONE AND CARTILAGE TISSUES","authors":"M. Boguń, K. Śledzińska, Małgorzata Giełdowska, P. Król, I. Kamińska, Sylwia Magdziarz","doi":"10.15240/tul/008/2023-1-023","DOIUrl":"https://doi.org/10.15240/tul/008/2023-1-023","url":null,"abstract":"The influence of the change in surface weight on the physical properties of oxidized polyacrylonitrile precursor nonwovens intended for the production of carbon materials used in tissue engineering was studied. Thermal insulation properties of the nonwovens and their behavior during incubation in phosphate buffered saline (PBS) were investigated. Initial carbonization tests showed that from the point of view of carbonization and further application of carbon materials, the most effective was the use of a surface weight of about 120 g/m2. At the same time, for the research conducted on the incubation of nonwovens in PBS, no significant change in the pH of the solution was found.","PeriodicalId":12123,"journal":{"name":"Fibres and Textiles in Eastern Europe","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83749573","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.15240/tul/008/2023-1-024
H. Březinová, M. Pechociakova, Jana Grábmüllerová
Given their organic origin, textiles rank among the rarest archaeological finds. While the vast majority of these artefacts are preserved as small fragments or mineralised remnants, their detailed textile technology study provides interesting and important information about the use of textile techniques and the quality of processing. The most important information concerns the utilised textile materials, but for degraded textiles, these materials are among the most difficult information to obtain. Image analysis using electron microscopy (SEM) is a significant aide in this pursuit.
{"title":"IDENTIFYING THE MATERIALS IN ARCHAEOLOGICAL TEXTILES","authors":"H. Březinová, M. Pechociakova, Jana Grábmüllerová","doi":"10.15240/tul/008/2023-1-024","DOIUrl":"https://doi.org/10.15240/tul/008/2023-1-024","url":null,"abstract":"Given their organic origin, textiles rank among the rarest archaeological finds. While the vast majority of these artefacts are preserved as small fragments or mineralised remnants, their detailed textile technology study provides interesting and important information about the use of textile techniques and the quality of processing. The most important information concerns the utilised textile materials, but for degraded textiles, these materials are among the most difficult information to obtain. Image analysis using electron microscopy (SEM) is a significant aide in this pursuit.","PeriodicalId":12123,"journal":{"name":"Fibres and Textiles in Eastern Europe","volume":"51 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83079799","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.15240/tul/008/2023-1-019
Tsegaye Sh. Lemmi, M. Barburski
The use of textiles produced from high tenacity(HT) polyester yarns as a reinforcement material in the mechanical rubber goods industries, mainly in the conveyor belt, is extensively increasing due to their high tensile strength, flexibility, thermal stability, modulus of elasticity, and light weightiness. To achieve the desired property of a conveyor belt, the reinforcement components undergo various processing stages; among those stages vulcanizing the reinforcement materials under high temperatures is the crucial process that determines the physical and mechanical properties of the conveyor belt. The main aim of this work was to analyze the effect of vulcanization parameters on the physio-mechanical properties of high tenacity polyester yarns and fabrics that are utilized to reinforce a conveyor belt. An extensive experimental study was conducted on a pre-activated HT polyester yarn of different linear densities and woven fabrics produced for the purpose of conveyor belt reinforcement by subjecting the yarns and fabrics to various aging temperatures for a certain period of aging time. Following the experiments, a comprehensive study and analysis were conducted on the tensile property of the yarns and fabrics. The finding revealed that thermal aging has an immense impact on determining the tensile strength and elongation of the yarn and woven fabric, which also has a direct influence on the properties of the conveyor belt. The analysis of experimental test results of polyester yarns and woven fabrics revealed that vulcanizing textile-reinforced conveyor belt at high temperatures (220 °C) could deteriorate the tensile strength and increase the elongation at break of the yarn, fabric, or belt.
{"title":"THERMAL AGING EFFECT ON THE PHYSIO-MECHANICAL PROPERTIES OF TEXTILES USED FOR THE REINFORCEMENT OF CONVEYOR BELTS","authors":"Tsegaye Sh. Lemmi, M. Barburski","doi":"10.15240/tul/008/2023-1-019","DOIUrl":"https://doi.org/10.15240/tul/008/2023-1-019","url":null,"abstract":"The use of textiles produced from high tenacity(HT) polyester yarns as a reinforcement material in the mechanical rubber goods industries, mainly in the conveyor belt, is extensively increasing due to their high tensile strength, flexibility, thermal stability, modulus of elasticity, and light weightiness. To achieve the desired property of a conveyor belt, the reinforcement components undergo various processing stages; among those stages vulcanizing the reinforcement materials under high temperatures is the crucial process that determines the physical and mechanical properties of the conveyor belt. The main aim of this work was to analyze the effect of vulcanization parameters on the physio-mechanical properties of high tenacity polyester yarns and fabrics that are utilized to reinforce a conveyor belt. An extensive experimental study was conducted on a pre-activated HT polyester yarn of different linear densities and woven fabrics produced for the purpose of conveyor belt reinforcement by subjecting the yarns and fabrics to various aging temperatures for a certain period of aging time. Following the experiments, a comprehensive study and analysis were conducted on the tensile property of the yarns and fabrics. The finding revealed that thermal aging has an immense impact on determining the tensile strength and elongation of the yarn and woven fabric, which also has a direct influence on the properties of the conveyor belt. The analysis of experimental test results of polyester yarns and woven fabrics revealed that vulcanizing textile-reinforced conveyor belt at high temperatures (220 °C) could deteriorate the tensile strength and increase the elongation at break of the yarn, fabric, or belt.","PeriodicalId":12123,"journal":{"name":"Fibres and Textiles in Eastern Europe","volume":"24 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89591343","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.15240/tul/008/2023-1-015
Roya Aghadavood, Zahra Shahbaz, Tahereh Kheiri, M. Shanbeh, R. Martínek
Electrostimulation is a way of treatment various nerve and muscle injuries as well as acute and chronic pain conditions. The electrotherapy which is increasingly used in physiotherapy, muscle is exposed to an electrical pulse in order to activate excitable tissue using external electrodes with the aim of building muscle strength, enhancement healing, improvement in patient’s mobility or reducing painTextile based electrodes are significantly noticed in the aspects of being flexible and re-usable and no needs of hydrogels, thereby avoiding skin irritation and allergic reactions and enhancing user comfort. This article presents a kind of textile based electrodes made of conductive yarns containing stainless steel/plyester blend fiber. The embroidery technique was used to prepare the textile based electrodes.Samples were examined on 10 people with pain in their bodies in a hospital without being moisturised. The purpose of this study is to asses the performance of 3 different textile based electrodes, considering the conductivity of the yarns which have been used to produce textile based electrodes, the usfulness of them for electrotherapy and comparing them with rubber electrodes commonly are used in clinics regularly.
{"title":"DESIGN AND INVESTIGATION THE OPERATION OF TEXTILE BASED ELECTRODES FOR ELECTROTHERAPY","authors":"Roya Aghadavood, Zahra Shahbaz, Tahereh Kheiri, M. Shanbeh, R. Martínek","doi":"10.15240/tul/008/2023-1-015","DOIUrl":"https://doi.org/10.15240/tul/008/2023-1-015","url":null,"abstract":"Electrostimulation is a way of treatment various nerve and muscle injuries as well as acute and chronic pain conditions. The electrotherapy which is increasingly used in physiotherapy, muscle is exposed to an electrical pulse in order to activate excitable tissue using external electrodes with the aim of building muscle strength, enhancement healing, improvement in patient’s mobility or reducing painTextile based electrodes are significantly noticed in the aspects of being flexible and re-usable and no needs of hydrogels, thereby avoiding skin irritation and allergic reactions and enhancing user comfort. This article presents a kind of textile based electrodes made of conductive yarns containing stainless steel/plyester blend fiber. The embroidery technique was used to prepare the textile based electrodes.Samples were examined on 10 people with pain in their bodies in a hospital without being moisturised. The purpose of this study is to asses the performance of 3 different textile based electrodes, considering the conductivity of the yarns which have been used to produce textile based electrodes, the usfulness of them for electrotherapy and comparing them with rubber electrodes commonly are used in clinics regularly.","PeriodicalId":12123,"journal":{"name":"Fibres and Textiles in Eastern Europe","volume":"27 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81569180","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.15240/tul/008/2023-1-011
Suzan Ozdemir, J. Oztemur, H. Sezgin, I. Yalcin-Enis
Vascular diseases are a major source of fatalities globally. However, the lack of accessibility of autologous vessels and the poor efficacy of commercial small-diameter vascular grafts limit surgical alternatives. Researchers therefore aimed to develop vascular prostheses that meet all requirements. Apart from the benefits of tissue-engineered grafts, significant obstacles that still hinder successful grafting include compliance mismatch, dilatation, thrombus development, and the absence of elastin. Among these issues, compliance mismatch between native vessel and artificial vascular scaffold has been mentioned in the literature as a possible cause of intimal hyperplasia, suture site rupture and endothelial and platelet cell damage. As a result, the usage of suitable materials and optimized fabrication techniques are required to achieve better control over the characteristics and functionality of the grafts. In particular, in the case of electrospun vascular grafts, the compliance can be adjusted throughout a broad range of values by adjusting the electrospinning parameters such as material selection, fiber orientation, porosity, and wall thickness. In this study, the electrospun vascular grafts consisting of pure PCL, PLA, and their blends were produced by using two different rotation speeds to achieve the oriented and non-oriented scaffolds. The impact of polymer type and fiber orientation on the compliance properties was evaluated. The results revealed that both material selection and fiber alignment have a significant effect on the compliance levels. PCL100_R grafts had the highest compliance value whereas the PCLPLA50_O scaffold had the lowest.
{"title":"THE EFFECT OF POLYMER TYPE AND FIBER ORIENTATION ON THE COMPLIANCE PROPERTIES OF ELECTROSPUN VASCULAR GRAFTS","authors":"Suzan Ozdemir, J. Oztemur, H. Sezgin, I. Yalcin-Enis","doi":"10.15240/tul/008/2023-1-011","DOIUrl":"https://doi.org/10.15240/tul/008/2023-1-011","url":null,"abstract":"Vascular diseases are a major source of fatalities globally. However, the lack of accessibility of autologous vessels and the poor efficacy of commercial small-diameter vascular grafts limit surgical alternatives. Researchers therefore aimed to develop vascular prostheses that meet all requirements. Apart from the benefits of tissue-engineered grafts, significant obstacles that still hinder successful grafting include compliance mismatch, dilatation, thrombus development, and the absence of elastin. Among these issues, compliance mismatch between native vessel and artificial vascular scaffold has been mentioned in the literature as a possible cause of intimal hyperplasia, suture site rupture and endothelial and platelet cell damage. As a result, the usage of suitable materials and optimized fabrication techniques are required to achieve better control over the characteristics and functionality of the grafts. In particular, in the case of electrospun vascular grafts, the compliance can be adjusted throughout a broad range of values by adjusting the electrospinning parameters such as material selection, fiber orientation, porosity, and wall thickness. In this study, the electrospun vascular grafts consisting of pure PCL, PLA, and their blends were produced by using two different rotation speeds to achieve the oriented and non-oriented scaffolds. The impact of polymer type and fiber orientation on the compliance properties was evaluated. The results revealed that both material selection and fiber alignment have a significant effect on the compliance levels. PCL100_R grafts had the highest compliance value whereas the PCLPLA50_O scaffold had the lowest.","PeriodicalId":12123,"journal":{"name":"Fibres and Textiles in Eastern Europe","volume":"44 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80255479","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.15240/tul/008/2023-1-012
J. Oztemur, Suzan Özdemir, H. Sezgin, I. Yalcin-Enis
In this study, neat PCL, neat PLA and PLA/PCL (50/50) based tubular surfaces are produced by electrospinning to simulate the native blood vessel structure and to investigate the effects of both graft material and fiber orientation on burst strength. The burst pressure values of these vascular graft structures that designed with both randomly oriented fibers and oriented fibers, measured by a custom- burst pressure tester, and the results are compared. The results show that fiber orientation have a great influence on burst pressure, regardless of the type of biomaterial. It is determined that grafts with oriented fibers have at least twice the burst strength than those with random fibers. The findings indicate that changing the graft material has also an effect on burst strength. When the results are analyzed by polymer type, although the PLA100_O sample has the highest burst strength among all oriented fiber sample groups, it is better to determine the vascular graft candidate by taking into account radial elasticity.
{"title":"A PRELIMINARY STUDY EXAMINING THE BURST STRENGTH OF VASCULAR TUBULAR SCAFFOLDS","authors":"J. Oztemur, Suzan Özdemir, H. Sezgin, I. Yalcin-Enis","doi":"10.15240/tul/008/2023-1-012","DOIUrl":"https://doi.org/10.15240/tul/008/2023-1-012","url":null,"abstract":"In this study, neat PCL, neat PLA and PLA/PCL (50/50) based tubular surfaces are produced by electrospinning to simulate the native blood vessel structure and to investigate the effects of both graft material and fiber orientation on burst strength. The burst pressure values of these vascular graft structures that designed with both randomly oriented fibers and oriented fibers, measured by a custom- burst pressure tester, and the results are compared. The results show that fiber orientation have a great influence on burst pressure, regardless of the type of biomaterial. It is determined that grafts with oriented fibers have at least twice the burst strength than those with random fibers. The findings indicate that changing the graft material has also an effect on burst strength. When the results are analyzed by polymer type, although the PLA100_O sample has the highest burst strength among all oriented fiber sample groups, it is better to determine the vascular graft candidate by taking into account radial elasticity.","PeriodicalId":12123,"journal":{"name":"Fibres and Textiles in Eastern Europe","volume":"60 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"77171563","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：