Chen Han, Shen Lei, Ren Ruoan, Xu Han, Liu Yanbing
Abstract In current society, smart clothing technology has become a critical way to improve the life quality of the elderly. This work conducted a category product evaluation and user demand system through the bibliometrics method, product evaluation analysis, focus group interviews and questionnaires. Based on the system, we designed smart clothing from the aspects of the clothing structure, hardware, software program and intelligent terminal platform to meet the needs of disabled elderly people and their caregivers in multiple scenarios. According to the test results of the smart clothing, the average error of temperature and humidity monitoring is 0.20°C and 2.88%RH. The time of putting on-taking off clothing in 6 representative daily scenarios was reduced by 51.67%. The daily body checking times, uncomfortable behaviours, and the anxiety of caregivers was decreased by 42.31%, 28.52% and 74.37%. Compared with ordinary clothing, six of the eight comfort performances are basically the same, and two are slightly worse.
{"title":"Research and Design of Smart Care-Giving Clothing for Disabled Elderly","authors":"Chen Han, Shen Lei, Ren Ruoan, Xu Han, Liu Yanbing","doi":"10.2478/ftee-2022-0034","DOIUrl":"https://doi.org/10.2478/ftee-2022-0034","url":null,"abstract":"Abstract In current society, smart clothing technology has become a critical way to improve the life quality of the elderly. This work conducted a category product evaluation and user demand system through the bibliometrics method, product evaluation analysis, focus group interviews and questionnaires. Based on the system, we designed smart clothing from the aspects of the clothing structure, hardware, software program and intelligent terminal platform to meet the needs of disabled elderly people and their caregivers in multiple scenarios. According to the test results of the smart clothing, the average error of temperature and humidity monitoring is 0.20°C and 2.88%RH. The time of putting on-taking off clothing in 6 representative daily scenarios was reduced by 51.67%. The daily body checking times, uncomfortable behaviours, and the anxiety of caregivers was decreased by 42.31%, 28.52% and 74.37%. Compared with ordinary clothing, six of the eight comfort performances are basically the same, and two are slightly worse.","PeriodicalId":12309,"journal":{"name":"Fibres & Textiles in Eastern Europe","volume":"30 1","pages":"21 - 31"},"PeriodicalIF":0.9,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44200203","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Origami has various manifestations and rich production techniques, and it is regarded as one of the indispensable contemporary art forms. In order to enrich the creative expressions of fashion design, this paper summarises the creative application forms of origami art in fashion design from the external and moulding characteristics of origami, studies the fabric characteristics through experimental verification, and summarises the applicable techniques of expression. The results show that the folding application forms of origami art and clothing modelling can be realised by using the expression methods of ironing and crimping, stitching texture moulding and repeated combination moulding, that is, pattern deformation folding application, fabric transformation folding application and modular combination folding application. The application of the folding form in clothing three-dimensional modelling and surface texture can give full play to the unique modelling beauty and artistic style of origami art and provide a reference for creative ideas in clothing design.
{"title":"Research on the Creative Application of Origami Performance Techniques in Clothing","authors":"Chenlu Wang, Chen Yang, Junlan Li, Mingxuan Zhu","doi":"10.2478/ftee-2022-0035","DOIUrl":"https://doi.org/10.2478/ftee-2022-0035","url":null,"abstract":"Abstract Origami has various manifestations and rich production techniques, and it is regarded as one of the indispensable contemporary art forms. In order to enrich the creative expressions of fashion design, this paper summarises the creative application forms of origami art in fashion design from the external and moulding characteristics of origami, studies the fabric characteristics through experimental verification, and summarises the applicable techniques of expression. The results show that the folding application forms of origami art and clothing modelling can be realised by using the expression methods of ironing and crimping, stitching texture moulding and repeated combination moulding, that is, pattern deformation folding application, fabric transformation folding application and modular combination folding application. The application of the folding form in clothing three-dimensional modelling and surface texture can give full play to the unique modelling beauty and artistic style of origami art and provide a reference for creative ideas in clothing design.","PeriodicalId":12309,"journal":{"name":"Fibres & Textiles in Eastern Europe","volume":"30 1","pages":"43 - 53"},"PeriodicalIF":0.9,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43367699","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract This study aims to obtain an accurate prediction model of mechanical properties of woven fabric to achieve customer satisfaction. Samples of plain woven fabric were produced from different yarn counts and blend ratios of cotton and polyester of weft yarn at different weft densities. Mechanical properties such as tensile strength, bending stiffness and elongation% in both the warp and weft directions were tested. The prediction model was based on Artificial Neural Networks (ANNs). For each model, thirty-nine samples were used for training and fifteen for testing prediction performance. Findings indicated that the ANN achieved a perfect performance in predicting all properties.
{"title":"Prediction of Mechanical Properties of Woven Fabrics by ANN","authors":"Sherien N. Elkateb","doi":"10.2478/ftee-2022-0036","DOIUrl":"https://doi.org/10.2478/ftee-2022-0036","url":null,"abstract":"Abstract This study aims to obtain an accurate prediction model of mechanical properties of woven fabric to achieve customer satisfaction. Samples of plain woven fabric were produced from different yarn counts and blend ratios of cotton and polyester of weft yarn at different weft densities. Mechanical properties such as tensile strength, bending stiffness and elongation% in both the warp and weft directions were tested. The prediction model was based on Artificial Neural Networks (ANNs). For each model, thirty-nine samples were used for training and fifteen for testing prediction performance. Findings indicated that the ANN achieved a perfect performance in predicting all properties.","PeriodicalId":12309,"journal":{"name":"Fibres & Textiles in Eastern Europe","volume":"30 1","pages":"54 - 59"},"PeriodicalIF":0.9,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41729121","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract As one of the representative silk-woven artworks of the 20th century in China, Chinese Xiangjin brocade, well-known as “the flower of Oriental art”, draws on the essence of Sichuan brocade, Yun brocade, Song brocade, so as to form its own unique artistic style. It also takes the lead in the innovation of traditional brocade in key processes such as craftsmanship, design and jacquard, whose drawing technique is the exact core skill making it intangible cultural heritage. So far, there have been few studies on crafts and textile design in China before the 20th century or even after the reform and opening up, and rather fewer studies on the structure of Xiangjin brocade in the 20th century. This paper attempts to record and classify 1008 pieces of Xiangjin brocade in the Suzhou Silk Archive, China, as well as to find out their design features, oriental flavour, and unique weaving techniques. In addition, the cultural connotation of Xiangjin brocade as the painting medium was also put forward by analysing those brocades' historical texts, images, and style.
{"title":"Design and Cultural Aspects of 20th Century Chinese Xiangjin Brocade","authors":"Zhao Wenji, Cui Rongrong, Niu Li","doi":"10.2478/ftee-2022-0030","DOIUrl":"https://doi.org/10.2478/ftee-2022-0030","url":null,"abstract":"Abstract As one of the representative silk-woven artworks of the 20th century in China, Chinese Xiangjin brocade, well-known as “the flower of Oriental art”, draws on the essence of Sichuan brocade, Yun brocade, Song brocade, so as to form its own unique artistic style. It also takes the lead in the innovation of traditional brocade in key processes such as craftsmanship, design and jacquard, whose drawing technique is the exact core skill making it intangible cultural heritage. So far, there have been few studies on crafts and textile design in China before the 20th century or even after the reform and opening up, and rather fewer studies on the structure of Xiangjin brocade in the 20th century. This paper attempts to record and classify 1008 pieces of Xiangjin brocade in the Suzhou Silk Archive, China, as well as to find out their design features, oriental flavour, and unique weaving techniques. In addition, the cultural connotation of Xiangjin brocade as the painting medium was also put forward by analysing those brocades' historical texts, images, and style.","PeriodicalId":12309,"journal":{"name":"Fibres & Textiles in Eastern Europe","volume":"30 1","pages":"116 - 129"},"PeriodicalIF":0.9,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42905626","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Asian women have smaller breast sizes and greater breast density, which suggests specific research on their breast kinematics and biomechanics. To investigate vertical breast displacement of Asian women among exercise modalities (rope skipping, walking, jogging, running) in different support conditions (wearing everyday bra or sports bra), and assess the motion between different parts of the breast, seven participants were selected to participate in this study. Five infrared markers were placed on each of their left breasts, and a three-dimensional motion capture system (NDI Optotrak Investigator) was used to collect the data on vertical breast displacement during walking (5 km/h), jogging (7.5 km/h), running (10 km/h) and rope skipping (2 Hz). No significant difference was found in the vertical displacement of different parts of the breast in the two bra conditions. Also, there was significant difference in vertical breast displacement among rope skipping, jogging and running. Breast size did not significantly affect its vertical displacement. The smaller, denser breast appears to reach a threshold of vertical displacement that is similar at high severities of dynamic exercises (jogging, running and rope skipping). The results might be useful for designing special sports bras for Asian women with small breasts or rope skipping participants to improve the shock absorption function.
{"title":"Vertical Breast Displacement in Asian Women During Exercise: influence of Bra Type, Size and Different Parts of the Breast","authors":"Xinyang Sheng, Xiaona Chen, M. Lake","doi":"10.2478/ftee-2022-0016","DOIUrl":"https://doi.org/10.2478/ftee-2022-0016","url":null,"abstract":"Abstract Asian women have smaller breast sizes and greater breast density, which suggests specific research on their breast kinematics and biomechanics. To investigate vertical breast displacement of Asian women among exercise modalities (rope skipping, walking, jogging, running) in different support conditions (wearing everyday bra or sports bra), and assess the motion between different parts of the breast, seven participants were selected to participate in this study. Five infrared markers were placed on each of their left breasts, and a three-dimensional motion capture system (NDI Optotrak Investigator) was used to collect the data on vertical breast displacement during walking (5 km/h), jogging (7.5 km/h), running (10 km/h) and rope skipping (2 Hz). No significant difference was found in the vertical displacement of different parts of the breast in the two bra conditions. Also, there was significant difference in vertical breast displacement among rope skipping, jogging and running. Breast size did not significantly affect its vertical displacement. The smaller, denser breast appears to reach a threshold of vertical displacement that is similar at high severities of dynamic exercises (jogging, running and rope skipping). The results might be useful for designing special sports bras for Asian women with small breasts or rope skipping participants to improve the shock absorption function.","PeriodicalId":12309,"journal":{"name":"Fibres & Textiles in Eastern Europe","volume":"30 1","pages":"1 - 8"},"PeriodicalIF":0.9,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45110018","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The application of phosphorescence for the modification of face mask materials is motivated by the need to appreciably increase their visibility while using graphical elements with a relatively small area. Phosphorescent dyes absorb part of the visible spectrum while emitting radiation at wavelengths that are longer than the absorbed ones. Thus, a phosphorescent substance can emit light even if it is not being illuminated at a given time (but was before). This paper describes studies of the optical properties based on parameters such as the reflectance coefficient, chromaticity coordinates, as well as luminance measured from digital images for two models of smog-protective face half-masks differing in terms of their inner layer with filtration properties and outer printed layer. The external surface of one mask type is printed with a phosphorescent solid star pattern, while the other with a phosphorescent open star pattern. The influence of the inner filter layer was assessed in correlation with the colour of the outer layer and the type of printing. Moreover, the phenomenon of phosphorescence was identified. The study resulted in developing a material with properties providing better visibility under defined use conditions.
{"title":"Coefficients for Assessing the Visibility of Materials Used in Anti-Smog Face Masks","authors":"A. Brochocka, G. Owczarek, Joanna Szkudlarek","doi":"10.2478/ftee-2022-0022","DOIUrl":"https://doi.org/10.2478/ftee-2022-0022","url":null,"abstract":"Abstract The application of phosphorescence for the modification of face mask materials is motivated by the need to appreciably increase their visibility while using graphical elements with a relatively small area. Phosphorescent dyes absorb part of the visible spectrum while emitting radiation at wavelengths that are longer than the absorbed ones. Thus, a phosphorescent substance can emit light even if it is not being illuminated at a given time (but was before). This paper describes studies of the optical properties based on parameters such as the reflectance coefficient, chromaticity coordinates, as well as luminance measured from digital images for two models of smog-protective face half-masks differing in terms of their inner layer with filtration properties and outer printed layer. The external surface of one mask type is printed with a phosphorescent solid star pattern, while the other with a phosphorescent open star pattern. The influence of the inner filter layer was assessed in correlation with the colour of the outer layer and the type of printing. Moreover, the phenomenon of phosphorescence was identified. The study resulted in developing a material with properties providing better visibility under defined use conditions.","PeriodicalId":12309,"journal":{"name":"Fibres & Textiles in Eastern Europe","volume":"30 1","pages":"46 - 56"},"PeriodicalIF":0.9,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43172185","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Gülseren Karabay, Y. Senol, H. Ozturk, Cansu Mesegul
Abstract The aim of this study was to estimate waterproofness values of seams composed of the combination of fusible threads and antiwick sewing threads through artificial neural networks (ANN). Fusible threads were used to obtain waterproof seams for the first time. Therefore, estimating the value of the waterproofness variable with the help of models created from test values can contribute to accelerating the progress of further studies. Hence, ten different samples were prepared for two fabrics, and the waterproofness values of the seams obtained were tested using a Textest FX 3000 Hydrostatic Head Tester III. For the prediction of waterproofness values of the seams, the Levenberg-Marquardt backpropagation algorithm was used for artificial neural network pattern models with sigmoid and positive linear transfer functions. Finally, the ANN model was successful in estimating the waterproofness of the seams. The highest correlation coefficient was R = 0.95081 which indicated that the prediction made by the neural network model proved to be reliable.
摘要本研究的目的是通过人工神经网络（ANN）估计由易熔线和防粘缝线组成的接缝的防水性值。易熔线首次被用于获得防水接缝。因此，借助于根据测试值创建的模型来估计防水性变量的值，有助于加快进一步研究的进展。因此，为两种织物制备了十个不同的样品，并使用Textest FX 3000静水压头测试仪III测试所获得的接缝的防水性值。为了预测接缝的防水值，将Levenberg-Marquardt反向传播算法用于具有S形和正线性传递函数的人工神经网络模式模型。最后，人工神经网络模型成功地估计了煤层的防水性。相关系数最高为R=0.95081，表明神经网络模型的预测是可靠的。
{"title":"Artificial Neural Network-based Prediction Technique for Waterproofness of Seams Obtained by Using Fusible Threads","authors":"Gülseren Karabay, Y. Senol, H. Ozturk, Cansu Mesegul","doi":"10.2478/ftee-2022-0019","DOIUrl":"https://doi.org/10.2478/ftee-2022-0019","url":null,"abstract":"Abstract The aim of this study was to estimate waterproofness values of seams composed of the combination of fusible threads and antiwick sewing threads through artificial neural networks (ANN). Fusible threads were used to obtain waterproof seams for the first time. Therefore, estimating the value of the waterproofness variable with the help of models created from test values can contribute to accelerating the progress of further studies. Hence, ten different samples were prepared for two fabrics, and the waterproofness values of the seams obtained were tested using a Textest FX 3000 Hydrostatic Head Tester III. For the prediction of waterproofness values of the seams, the Levenberg-Marquardt backpropagation algorithm was used for artificial neural network pattern models with sigmoid and positive linear transfer functions. Finally, the ANN model was successful in estimating the waterproofness of the seams. The highest correlation coefficient was R = 0.95081 which indicated that the prediction made by the neural network model proved to be reliable.","PeriodicalId":12309,"journal":{"name":"Fibres & Textiles in Eastern Europe","volume":"30 1","pages":"27 - 32"},"PeriodicalIF":0.9,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48946325","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. Gendaszewska, B. Wionczyk, Agata Bednarek, P. Boniecki
Abstract Leather products provide an ideal environment for microbial growth. In order to prevent the appearance and spread of various types of microorganisms, it is treated with selected biocides and even essential oils. The aim of this paper was to investigate the antifungal activity of selected essential oils applied to finished chromium tanned leather which is intended for leather fancy products. Antifungal activity was evaluated according to the PN-EN 14119: 2005 standard. Four finished chromium tanned leathers were tested, each of which was soaked in the following essential oils: tea tree essential oil at a concentration of 1, 2 and 5% and thyme essential oil at concentration of 1, 2 and 5%. The results obtained indicated that leather finishing with thyme essential oil showed the antimicrobial activity against Aspergillus niger, Chaetomium globosum and Candida albicans strains. The application of 5% thyme essential oil to leather samples inhibited the growth of all strains tested. Using tea tree essential oil on leather samples showed a antimicrobial effect only against Candida albicans. The application of essential oils in the leather finishing process may be an alternative to biocides used in the tanning industry.
{"title":"Antifungal Activity of Finished Chromium Tanned Leather Containing Thyme and Tea Tree Essential Oils","authors":"D. Gendaszewska, B. Wionczyk, Agata Bednarek, P. Boniecki","doi":"10.2478/ftee-2022-0021","DOIUrl":"https://doi.org/10.2478/ftee-2022-0021","url":null,"abstract":"Abstract Leather products provide an ideal environment for microbial growth. In order to prevent the appearance and spread of various types of microorganisms, it is treated with selected biocides and even essential oils. The aim of this paper was to investigate the antifungal activity of selected essential oils applied to finished chromium tanned leather which is intended for leather fancy products. Antifungal activity was evaluated according to the PN-EN 14119: 2005 standard. Four finished chromium tanned leathers were tested, each of which was soaked in the following essential oils: tea tree essential oil at a concentration of 1, 2 and 5% and thyme essential oil at concentration of 1, 2 and 5%. The results obtained indicated that leather finishing with thyme essential oil showed the antimicrobial activity against Aspergillus niger, Chaetomium globosum and Candida albicans strains. The application of 5% thyme essential oil to leather samples inhibited the growth of all strains tested. Using tea tree essential oil on leather samples showed a antimicrobial effect only against Candida albicans. The application of essential oils in the leather finishing process may be an alternative to biocides used in the tanning industry.","PeriodicalId":12309,"journal":{"name":"Fibres & Textiles in Eastern Europe","volume":"30 1","pages":"41 - 45"},"PeriodicalIF":0.9,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43212048","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract As the spread of Covid-19 has created a fatal threat to human survival, a comfortable and virus-deactivated functional face mask is extremely necessary. Herein, an appropriate thermally comfortable and highly breathable as well as virus-protecting functional knit fabric face mask was developed that consisted of multichannel PE Coolmax® yarn with cotton yarn. Due to the multichannel structure (four and six channels) of PE Coolmax® yarn with cotton yarn blended fabric, the fiber showed good filtration efficiency, air permeability, water vapour permeability and moisture management properties. In addition, the thermal conductivity and absorptive properties of the blended fabric based on the properties of PE Coolmax® yarn with cotton yarn make the face mask more comfortable for the user.
{"title":"Investigating the Functional and Comfort properties of a Face Mask Based on a Coolmax® Blended Cotton Fabric","authors":"Shekh Md. Mamun Kabir, M. Hasan, Akm Mashud Alam","doi":"10.2478/ftee-2022-0028","DOIUrl":"https://doi.org/10.2478/ftee-2022-0028","url":null,"abstract":"Abstract As the spread of Covid-19 has created a fatal threat to human survival, a comfortable and virus-deactivated functional face mask is extremely necessary. Herein, an appropriate thermally comfortable and highly breathable as well as virus-protecting functional knit fabric face mask was developed that consisted of multichannel PE Coolmax® yarn with cotton yarn. Due to the multichannel structure (four and six channels) of PE Coolmax® yarn with cotton yarn blended fabric, the fiber showed good filtration efficiency, air permeability, water vapour permeability and moisture management properties. In addition, the thermal conductivity and absorptive properties of the blended fabric based on the properties of PE Coolmax® yarn with cotton yarn make the face mask more comfortable for the user.","PeriodicalId":12309,"journal":{"name":"Fibres & Textiles in Eastern Europe","volume":"30 1","pages":"102 - 110"},"PeriodicalIF":0.9,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49587013","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. Wieczorek, Anna Słubik, Iwona Masłowska-Lipowicz, D. Gendaszewska, K. Ławińska
Abstract Smart hydrogels, or stimuli-responsive hydrogels, can and should play an important role as excellent drug carriers. These three-dimensional structure materials are composed of crosslinked hydrophilic polymer chains that are able to dramatically change their volume and other properties in response to environmental stimuli, such as pH, temperature and solvent changes. The main goal of individual research projects was the development of new hydrogels based on polypeptides. These hybrid materials are crosslinked hydrophilic polymers capable of absorbing large amounts of water, saline or physiological solutions. Superabsorbent hydrogels based on natural materials are non-toxic, biocompatible and biodegradable. Unfortunately, their mechanical properties in the swollen state are weak. In this article, we present a review of literature on the synthesis of smart hydrogels based on keratin or collagen with synthetic materials.
{"title":"Collagen and Keratin as a Components of Hydrogels","authors":"D. Wieczorek, Anna Słubik, Iwona Masłowska-Lipowicz, D. Gendaszewska, K. Ławińska","doi":"10.2478/ftee-2022-0024","DOIUrl":"https://doi.org/10.2478/ftee-2022-0024","url":null,"abstract":"Abstract Smart hydrogels, or stimuli-responsive hydrogels, can and should play an important role as excellent drug carriers. These three-dimensional structure materials are composed of crosslinked hydrophilic polymer chains that are able to dramatically change their volume and other properties in response to environmental stimuli, such as pH, temperature and solvent changes. The main goal of individual research projects was the development of new hydrogels based on polypeptides. These hybrid materials are crosslinked hydrophilic polymers capable of absorbing large amounts of water, saline or physiological solutions. Superabsorbent hydrogels based on natural materials are non-toxic, biocompatible and biodegradable. Unfortunately, their mechanical properties in the swollen state are weak. In this article, we present a review of literature on the synthesis of smart hydrogels based on keratin or collagen with synthetic materials.","PeriodicalId":12309,"journal":{"name":"Fibres & Textiles in Eastern Europe","volume":"30 1","pages":"61 - 69"},"PeriodicalIF":0.9,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"69208014","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：