首页 > 最新文献

International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)最新文献

英文 中文
Study of effects of rare earth impurities on structure of matrix emission of the lead tungstate crystals 稀土杂质对钨酸铅晶体基体发射结构影响的研究
O. Chukova, S. Nedilko
The paper reports study of complex structure of matrix emission of undoped and RE-doped PbWO4 crystals. Decomposition of the spectra shows contributions of five components at 410, 485, 520, 565, 635 nm in emission of all the investigated samples. Their relative contributions depend on RE doping. Observed effects of RE doping are the same for the crystals with different RE impurities. Structures of luminescent centres are discussed taking into account studied effects of the impurity RE ions on spectral characteristics of the matrix emission.
本文报道了未掺杂和掺稀土的PbWO4晶体基质发射的复杂结构。光谱分解表明,所有样品在410、485、520、565、635 nm处的发射光谱有5种组分的贡献。它们的相对贡献取决于稀土掺杂。稀土掺杂对不同稀土杂质晶体的观察效果是相同的。考虑杂质稀土离子对基体发射光谱特性的影响,讨论了发光中心的结构。
{"title":"Study of effects of rare earth impurities on structure of matrix emission of the lead tungstate crystals","authors":"O. Chukova, S. Nedilko","doi":"10.1109/OMEE.2014.6912376","DOIUrl":"https://doi.org/10.1109/OMEE.2014.6912376","url":null,"abstract":"The paper reports study of complex structure of matrix emission of undoped and RE-doped PbWO4 crystals. Decomposition of the spectra shows contributions of five components at 410, 485, 520, 565, 635 nm in emission of all the investigated samples. Their relative contributions depend on RE doping. Observed effects of RE doping are the same for the crystals with different RE impurities. Structures of luminescent centres are discussed taking into account studied effects of the impurity RE ions on spectral characteristics of the matrix emission.","PeriodicalId":142377,"journal":{"name":"International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-09-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115819970","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Effect of Bi2O3 doping and CIP on ionic conductivity of scandia ceria stabilized zirconia Bi2O3掺杂和CIP对氧化锆离子电导率的影响
E. Nesova, V. Barbashov, A. Jebel, Y. Komysa
Effect of Bi2O3 doping and cold isostatic pressing (CIP ) on the ionic conductivity of the ceramics ZrO2 + 10 mol .% Sc2O3 + 1 mol. % CeO2 was studied. It was established that sintering the Bi2O3 doped ceramic specimens uses the lower temperatures after cold isostatic pressing (value of the sintering temperature was less than 400°C). CIP and sintering regimes (0.6 GPa ; 1100°C at 70 h) of specimens yielded high conductive and dense ceramics (0.028 S cm-1 at 800°C).
研究了Bi2O3掺杂和冷等静压(CIP)对ZrO2 + 10 mol. % Sc2O3 + 1 mol. % CeO2陶瓷离子电导率的影响。结果表明,Bi2O3掺杂陶瓷试样的烧结采用冷等静压后较低的温度(烧结温度小于400℃)。CIP和烧结制度(0.6 GPa;1100°C, 70 h)的样品产生高导电和致密的陶瓷(0.028 S cm-1, 800°C)。
{"title":"Effect of Bi2O3 doping and CIP on ionic conductivity of scandia ceria stabilized zirconia","authors":"E. Nesova, V. Barbashov, A. Jebel, Y. Komysa","doi":"10.1109/OMEE.2014.6912356","DOIUrl":"https://doi.org/10.1109/OMEE.2014.6912356","url":null,"abstract":"Effect of Bi<sub>2</sub>O<sub>3</sub> doping and cold isostatic pressing (CIP ) on the ionic conductivity of the ceramics ZrO<sub>2</sub> + 10 mol .% Sc<sub>2</sub>O<sub>3</sub> + 1 mol. % CeO<sub>2</sub> was studied. It was established that sintering the Bi<sub>2</sub>O<sub>3</sub> doped ceramic specimens uses the lower temperatures after cold isostatic pressing (value of the sintering temperature was less than 400°C). CIP and sintering regimes (0.6 GPa ; 1100°C at 70 h) of specimens yielded high conductive and dense ceramics (0.028 S cm<sup>-1</sup> at 800°C).","PeriodicalId":142377,"journal":{"name":"International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-09-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131392717","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Composite magnetic domain structure in epitaxial YIG films with moderate uniaxial anisotropy 中等单轴各向异性外延YIG薄膜的复合磁畴结构
V. Bondar’, S. Ubizskii, I. Syvorotka
It is shown in this work that the observed stripe-like magnetic domain structure in epitaxial iron garnet films possessing small uniaxial magnetic anisotropy cannot be explained as equilibrium stripes divided by 180° domain walls and can be described by the composite domain structure of two-level organization, that consists of stripe-like micro-domains and larger macro-domains and has lower total energy than simple stripe domain structure.
研究表明,在单轴磁各向异性较小的外延铁石榴石薄膜中观察到的条状磁畴结构不能解释为被180°畴壁分割的平衡条纹,而可以用两级组织的复合畴结构来描述,该结构由条状微畴和较大的宏观畴组成,总能量低于简单条状畴结构。
{"title":"Composite magnetic domain structure in epitaxial YIG films with moderate uniaxial anisotropy","authors":"V. Bondar’, S. Ubizskii, I. Syvorotka","doi":"10.1109/OMEE.2014.6912413","DOIUrl":"https://doi.org/10.1109/OMEE.2014.6912413","url":null,"abstract":"It is shown in this work that the observed stripe-like magnetic domain structure in epitaxial iron garnet films possessing small uniaxial magnetic anisotropy cannot be explained as equilibrium stripes divided by 180° domain walls and can be described by the composite domain structure of two-level organization, that consists of stripe-like micro-domains and larger macro-domains and has lower total energy than simple stripe domain structure.","PeriodicalId":142377,"journal":{"name":"International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)","volume":"87 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-09-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133455429","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Czochralski growth and characterization of mixed BGO-BSO crystals BGO-BSO混合晶体的Czochralski生长及表征
E. Galenin, I. Gerasymov, M. Biatov, O. Sidletskiy, V. Baranov, J. Budagov, Y. Davydov, V. Glagolev
Mixed BGO-BSO (BGSO) scintillation crystals with structure of eulitine are promising for application in high energy physics (HEP) experiments due to low cost, high density, and reasonable light output. This work is focused on optimization of growth parameters and composition of BGSO mixed crystals. BGSO with improved energy resolution up to 16.2% at 662 keV gamma-irradiation was obtained. The effects of recrystallization and post-growth thermal treatment are discussed.
具有欧拉线型结构的BGO-BSO (BGSO)混合闪烁晶体具有成本低、密度大、光输出合理等优点,在高能物理(HEP)实验中具有广阔的应用前景。本文主要研究了BGSO混合晶体的生长参数和组成。在662 keV辐照下获得了能量分辨率高达16.2%的BGSO。讨论了再结晶和长大后热处理的影响。
{"title":"Czochralski growth and characterization of mixed BGO-BSO crystals","authors":"E. Galenin, I. Gerasymov, M. Biatov, O. Sidletskiy, V. Baranov, J. Budagov, Y. Davydov, V. Glagolev","doi":"10.1109/OMEE.2014.6912434","DOIUrl":"https://doi.org/10.1109/OMEE.2014.6912434","url":null,"abstract":"Mixed BGO-BSO (BGSO) scintillation crystals with structure of eulitine are promising for application in high energy physics (HEP) experiments due to low cost, high density, and reasonable light output. This work is focused on optimization of growth parameters and composition of BGSO mixed crystals. BGSO with improved energy resolution up to 16.2% at 662 keV gamma-irradiation was obtained. The effects of recrystallization and post-growth thermal treatment are discussed.","PeriodicalId":142377,"journal":{"name":"International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115135597","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Interaction in the systems MII2P4O12-MICl(MINO3) (MI - Li, Na, K; MII - Co, Ni)
O. Livitska, N. Strutynska, I. Zatovsky, N. Slobodyanik
The interaction in the systems MII2P4O12-MICl (MINO3) (MI - Li, Na, K; MII - Co, Ni) was investigated in temperature range 673-1073 K. Obtained crystalline phases have been investigated using X-ray powder diffraction, electronic, Raman and FTIR spectroscopy and scanning electron microscopy.
MII2P4O12-MICl (MINO3) (MI - Li, Na, K)体系的相互作用在673 ~ 1073 K的温度范围内对MII - Co, Ni)进行了研究。用x射线粉末衍射、电子光谱、拉曼光谱和红外光谱以及扫描电镜对所得的晶相进行了研究。
{"title":"Interaction in the systems MII2P4O12-MICl(MINO3) (MI - Li, Na, K; MII - Co, Ni)","authors":"O. Livitska, N. Strutynska, I. Zatovsky, N. Slobodyanik","doi":"10.1109/OMEE.2014.6912423","DOIUrl":"https://doi.org/10.1109/OMEE.2014.6912423","url":null,"abstract":"The interaction in the systems M<sup>II</sup><sub>2</sub>P<sub>4</sub>O<sub>12</sub>-M<sup>I</sup>Cl (M<sup>I</sup>NO<sub>3</sub>) (M<sup>I</sup> - Li, Na, K; M<sup>II</sup> - Co, Ni) was investigated in temperature range 673-1073 K. Obtained crystalline phases have been investigated using X-ray powder diffraction, electronic, Raman and FTIR spectroscopy and scanning electron microscopy.","PeriodicalId":142377,"journal":{"name":"International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124454800","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Mechanical characteristics and high temperature stability of oxidized Ti3AlC2 nanolaminat 氧化Ti3AlC2纳米层的力学特性及高温稳定性
T. Prikhna, O. Ostash, T. Basyuk, A. Ivasyshin, V. Podhurska, M. Loshak, T. Cabioc’h, P. Chartier, V. Sverdun, V. Moshchil, S. Dub, M. Karpets, A. Starostina, A. Kozyrev
The oxide film formed on the surface of the highly dense (ρ=4.27 g/cm3, porosity 1 %) material based on nanolaminated MAX phase Ti3AlC2 (89 % Ti3AlC2, 6 % TiC, 5 % Al2O3) manufactured by hot pressing (at 30 MPa) made the material highly resistant in air at high temperatures: after 1000 hours of exposition at 600 °C it demonstrated a higher resistance to oxidation than chromium ferrite steels (Crofer GPU and JDA types). Due to the surface oxidation self-healing of defects took place. Besides, the Ti3AlC2 material demonstrated resistance against high-temperature creep and after being kept in H2 at 600 °C for 3h its bending strength reduced by 5 % only. At room temperature the Ti3AlC2 bulk exhibited microhardness Hμ = 4.6 GPa (at 5 N), hardness HV50 = 630 (at 50 N ) and HRA = 70 (at 600 N), Young modulus was 140 ± 29 GPa, bending strength =500 MPa, compression strength 700 MPa, and fracture toughness K1C=10.2 MPa·m0.5.
通过热压(30 MPa)制备的基于纳米层化MAX相Ti3AlC2 (89% Ti3AlC2, 6% TiC, 5% Al2O3)的高密度(ρ=4.27 g/cm3,孔隙率1%)材料表面形成的氧化膜使该材料在高温空气中具有很高的抗氧化性:在600℃下暴露1000小时后,它表现出比铬铁素体钢(Crofer GPU和JDA类型)更高的抗氧化性。由于表面氧化,缺陷发生自愈。此外,Ti3AlC2材料具有抗高温蠕变性能,在600℃的H2中保存3h后,其抗弯强度仅下降5%。室温下,Ti3AlC2体的显微硬度Hμ = 4.6 GPa (5 N),硬度HV50 = 630 (50 N), HRA = 70 (600 N),杨氏模量140±29 GPa,抗弯强度为500 MPa,抗压强度为700 MPa,断裂韧性K1C=10.2 MPa·m0.5。
{"title":"Mechanical characteristics and high temperature stability of oxidized Ti3AlC2 nanolaminat","authors":"T. Prikhna, O. Ostash, T. Basyuk, A. Ivasyshin, V. Podhurska, M. Loshak, T. Cabioc’h, P. Chartier, V. Sverdun, V. Moshchil, S. Dub, M. Karpets, A. Starostina, A. Kozyrev","doi":"10.1109/OMEE.2014.6912349","DOIUrl":"https://doi.org/10.1109/OMEE.2014.6912349","url":null,"abstract":"The oxide film formed on the surface of the highly dense (ρ=4.27 g/cm<sup>3</sup>, porosity 1 %) material based on nanolaminated MAX phase Ti<sub>3</sub>AlC<sub>2</sub> (89 % Ti<sub>3</sub>AlC<sub>2</sub>, 6 % TiC, 5 % Al<sub>2</sub>O<sub>3</sub>) manufactured by hot pressing (at 30 MPa) made the material highly resistant in air at high temperatures: after 1000 hours of exposition at 600 °C it demonstrated a higher resistance to oxidation than chromium ferrite steels (Crofer GPU and JDA types). Due to the surface oxidation self-healing of defects took place. Besides, the Ti<sub>3</sub>AlC<sub>2</sub> material demonstrated resistance against high-temperature creep and after being kept in H<sub>2</sub> at 600 °C for 3h its bending strength reduced by 5 % only. At room temperature the Ti<sub>3</sub>AlC<sub>2</sub> bulk exhibited microhardness Hμ = 4.6 GPa (at 5 N), hardness HV<sub>50</sub> = 630 (at 50 N ) and HRA = 70 (at 600 N), Young modulus was 140 ± 29 GPa, bending strength =500 MPa, compression strength 700 MPa, and fracture toughness K<sub>1C</sub>=10.2 MPa·m<sup>0.5</sup>.","PeriodicalId":142377,"journal":{"name":"International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125852659","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
AC losses in La1−xSrxMnO3 nanoparticles fabricated by different technological routes 不同工艺路线制备La1−xSrxMnO3纳米颗粒的交流损耗
A. Tovstolytkin, S. Solopan, V. Kalita, S. Ryabchenko, A. Belous
Weakly agglomerated crystalline nanoparticles of La1-xSrxMnO3 manganites have been synthesized by solgel method, co-precipitation from nonaqueous solutions and microemulsion technique. Structural and magnetic characteristics of the synthesized particles, as well as their heating efficiency under AC electromagnetic fields are studied. The contributions to AC losses resulted from different heating mechanisms are calculated. The directions to enhance the heating efficiency of various kinds of magnetic nanoparticles are outlined.
采用溶胶凝胶法、非水溶液共沉淀法和微乳液法制备了La1-xSrxMnO3锰酸盐弱团聚结晶纳米颗粒。研究了合成颗粒的结构和磁性,以及在交流电磁场下的热效率。计算了不同加热机制对交流损耗的贡献。概述了提高各类磁性纳米颗粒热效率的研究方向。
{"title":"AC losses in La1−xSrxMnO3 nanoparticles fabricated by different technological routes","authors":"A. Tovstolytkin, S. Solopan, V. Kalita, S. Ryabchenko, A. Belous","doi":"10.1109/OMEE.2014.6912347","DOIUrl":"https://doi.org/10.1109/OMEE.2014.6912347","url":null,"abstract":"Weakly agglomerated crystalline nanoparticles of La1-xSrxMnO3 manganites have been synthesized by solgel method, co-precipitation from nonaqueous solutions and microemulsion technique. Structural and magnetic characteristics of the synthesized particles, as well as their heating efficiency under AC electromagnetic fields are studied. The contributions to AC losses resulted from different heating mechanisms are calculated. The directions to enhance the heating efficiency of various kinds of magnetic nanoparticles are outlined.","PeriodicalId":142377,"journal":{"name":"International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126873337","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Electronic excitations in the crystal Li2O evaluated within the Bethe-Salpeter equation 用Bethe-Salpeter方程计算Li2O晶体中的电子激发
S. Syrotyuk, V. Shved
The electron energy bands have been calculated within the LDA and GW formalism. The electron-hole interaction has been taken into account within the Bethe-Salpeter equation. The excitonic energies have been evaluated.
在LDA和GW形式下计算了电子能带。在贝特-萨尔皮特方程中考虑了电子-空穴相互作用。激子能已经计算过了。
{"title":"Electronic excitations in the crystal Li2O evaluated within the Bethe-Salpeter equation","authors":"S. Syrotyuk, V. Shved","doi":"10.1109/OMEE.2014.6912337","DOIUrl":"https://doi.org/10.1109/OMEE.2014.6912337","url":null,"abstract":"The electron energy bands have been calculated within the LDA and GW formalism. The electron-hole interaction has been taken into account within the Bethe-Salpeter equation. The excitonic energies have been evaluated.","PeriodicalId":142377,"journal":{"name":"International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)","volume":"36 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128302233","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Sorption of scandium on acid-modified transcarpathian clinoptilolite 酸改性喀尔巴阡斜沸石对钪的吸附
V. Vasylechko, C. Korpalo, G. Gryshchouk
The sorption properties of acid-modified Transcarpathian clinoptilolite towards Sc(III) under dynamic conditions have been studied. It was found that the most effective acid-modifier is 0.5M HCl solution. Maximal sorption capacity is observed in the previously heat-treated at 50 °C samples of H-clinoptilolite in low alkaline solutions (pH=8.5). At this conditions almost all of the Sc(III) ions are in the form of neutral hydroxo complex [Sc(OH)3(H2O)3]. The sorption capacity of H-clinoptilolite towards Sc(III) ions under optimum conditions is 9.98 mg/g.
研究了酸改性的喀尔巴阡斜沸石对Sc(III)的动态吸附性能。结果表明,0.5M HCl溶液是最有效的酸调节剂。在低碱性溶液(pH=8.5)中,先前在50°C下热处理的h -斜沸石样品观察到最大的吸附能力。在这种条件下,几乎所有的Sc(III)离子都以中性氢氧配合物[Sc(OH)3(H2O)3]的形式存在。在最佳条件下,h -斜沸石对Sc(III)离子的吸附量为9.98 mg/g。
{"title":"Sorption of scandium on acid-modified transcarpathian clinoptilolite","authors":"V. Vasylechko, C. Korpalo, G. Gryshchouk","doi":"10.1109/OMEE.2014.6912325","DOIUrl":"https://doi.org/10.1109/OMEE.2014.6912325","url":null,"abstract":"The sorption properties of acid-modified Transcarpathian clinoptilolite towards Sc(III) under dynamic conditions have been studied. It was found that the most effective acid-modifier is 0.5M HCl solution. Maximal sorption capacity is observed in the previously heat-treated at 50 °C samples of H-clinoptilolite in low alkaline solutions (pH=8.5). At this conditions almost all of the Sc(III) ions are in the form of neutral hydroxo complex [Sc(OH)3(H2O)3]. The sorption capacity of H-clinoptilolite towards Sc(III) ions under optimum conditions is 9.98 mg/g.","PeriodicalId":142377,"journal":{"name":"International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)","volume":"38 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126702192","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Luminescent properties of crystalline YAG:Ce for white LED applications YAG:Ce晶体在白光LED中的发光特性
S. Nizhankovskyi, Yu. N. Savvin, A. V. Tan’ko, S. Kryvonogov, A. Budnikov, V. Sorokin, A. Listratenko
Performed is a comparative study of the characteristics of YAG:Ce luminescent converters with single-crystalline, cellular and polycrystalline structure obtained by the method of directed crystallization of the melt. Peculiarities of the structure and surface morphology of the converters are found to essentially influence their spectral characteristics and luminescence efficiency. It is shown that polycrystalline converters based on YAG:Ce are promising for application in white light emitting diodes.
对熔体定向结晶法制备的单晶、胞状和多晶YAG:Ce发光转换器的特性进行了比较研究。研究发现,变换器的结构和表面形貌特性对其光谱特性和发光效率有重要影响。结果表明,基于YAG:Ce的多晶变换器在白光二极管中具有广阔的应用前景。
{"title":"Luminescent properties of crystalline YAG:Ce for white LED applications","authors":"S. Nizhankovskyi, Yu. N. Savvin, A. V. Tan’ko, S. Kryvonogov, A. Budnikov, V. Sorokin, A. Listratenko","doi":"10.1109/OMEE.2014.6912382","DOIUrl":"https://doi.org/10.1109/OMEE.2014.6912382","url":null,"abstract":"Performed is a comparative study of the characteristics of YAG:Ce luminescent converters with single-crystalline, cellular and polycrystalline structure obtained by the method of directed crystallization of the melt. Peculiarities of the structure and surface morphology of the converters are found to essentially influence their spectral characteristics and luminescence efficiency. It is shown that polycrystalline converters based on YAG:Ce are promising for application in white light emitting diodes.","PeriodicalId":142377,"journal":{"name":"International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)","volume":"142 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126706905","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
期刊
International Conference on Oxide Materials for Electronic Engineering - fabrication, properties and applications (OMEE-2014)
全部 Acc. Chem. Res. ACS Applied Bio Materials ACS Appl. Electron. Mater. ACS Appl. Energy Mater. ACS Appl. Mater. Interfaces ACS Appl. Nano Mater. ACS Appl. Polym. Mater. ACS BIOMATER-SCI ENG ACS Catal. ACS Cent. Sci. ACS Chem. Biol. ACS Chemical Health & Safety ACS Chem. Neurosci. ACS Comb. Sci. ACS Earth Space Chem. ACS Energy Lett. ACS Infect. Dis. ACS Macro Lett. ACS Mater. Lett. ACS Med. Chem. Lett. ACS Nano ACS Omega ACS Photonics ACS Sens. ACS Sustainable Chem. Eng. ACS Synth. Biol. Anal. Chem. BIOCHEMISTRY-US Bioconjugate Chem. BIOMACROMOLECULES Chem. Res. Toxicol. Chem. Rev. Chem. Mater. CRYST GROWTH DES ENERG FUEL Environ. Sci. Technol. Environ. Sci. Technol. Lett. Eur. J. Inorg. Chem. IND ENG CHEM RES Inorg. Chem. J. Agric. Food. Chem. J. Chem. Eng. Data J. Chem. Educ. J. Chem. Inf. Model. J. Chem. Theory Comput. J. Med. Chem. J. Nat. Prod. J PROTEOME RES J. Am. Chem. Soc. LANGMUIR MACROMOLECULES Mol. Pharmaceutics Nano Lett. Org. Lett. ORG PROCESS RES DEV ORGANOMETALLICS J. Org. Chem. J. Phys. Chem. J. Phys. Chem. A J. Phys. Chem. B J. Phys. Chem. C J. Phys. Chem. Lett. Analyst Anal. Methods Biomater. Sci. Catal. Sci. Technol. Chem. Commun. Chem. Soc. Rev. CHEM EDUC RES PRACT CRYSTENGCOMM Dalton Trans. Energy Environ. Sci. ENVIRON SCI-NANO ENVIRON SCI-PROC IMP ENVIRON SCI-WAT RES Faraday Discuss. Food Funct. Green Chem. Inorg. Chem. Front. Integr. Biol. J. Anal. At. Spectrom. J. Mater. Chem. A J. Mater. Chem. B J. Mater. Chem. C Lab Chip Mater. Chem. Front. Mater. Horiz. MEDCHEMCOMM Metallomics Mol. Biosyst. Mol. Syst. Des. Eng. Nanoscale Nanoscale Horiz. Nat. Prod. Rep. New J. Chem. Org. Biomol. Chem. Org. Chem. Front. PHOTOCH PHOTOBIO SCI PCCP Polym. Chem.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1