Sujeet Kumar Thakur, Seera Raviteja, Tayur N. Guru Row, Sambasivan Venkat Eswaran
Lignite humic acid on reaction with formaldehyde and aqueous alkali led to a polybicyclo[3.3.1]nonane. This was characterized spectroscopically using mass spectrometry, FT-IR, powder X-ray diffraction, TEM, and NMR studies (1H-NMR, CP-MAS-SS-NMR) which though challenging were useful for confirming the structure of the BCN polymer. The product showed an envelope peak in its MALDI-MS spectrum, based on which M ̅ n , M ̅ w , and polydispersity index have been calculated. Based on the NMR spectrum of intermediate, the presence of the N-formyl group has been shown in it. The new polymer could be useful in agriculture in water-deficient areas. Most papers on humic acids include only broad and general information like elemental analysis (occasionally TEM, SEM, TGA, DSC, etc.). Very complicated structures have been proposed by scientists earlier. Only in very recent years, it has been recognized that these are relatively small molecules which masquerade as supramolecular structures. It is pointed out that most papers do not put down the structure of the compound and provide no concrete proof for proposing such structures. The novelty of our work is that we have characterized the precise molecular weights based on mass spectrometry and NMR spectroscopy along with a well-defined structure. This is not the case in most other publications.
褐煤腐殖酸与甲醛和碱水反应生成多双环[3.3.1]壬烷。通过质谱、FT-IR、粉末x射线衍射、TEM和NMR研究(1H-NMR、CP-MAS-SS-NMR)对其进行了光谱表征，这些研究虽然具有挑战性，但对确定BCN聚合物的结构很有用。产品在MALDI-MS谱上出现包络峰，据此计算出M′n、M′w和多分散性指数。通过对中间体的核磁共振谱分析，证实了n -甲酰基的存在。这种新型聚合物可用于缺水地区的农业。大多数关于腐植酸的论文只包括元素分析(偶尔有TEM, SEM, TGA, DSC等)等广泛和一般的信息。之前科学家们已经提出了非常复杂的结构。直到最近几年，人们才认识到这些相对较小的分子伪装成超分子结构。文章指出，大多数论文没有给出化合物的结构，也没有提供提出这种结构的具体证据。我们工作的新颖之处在于，我们已经根据质谱和核磁共振光谱以及定义明确的结构表征了精确的分子量。在大多数其他出版物中，情况并非如此。
{"title":"Base-Catalyzed Polymerization of a Substituted Methylenebicyclo[3.3.1]nonane","authors":"Sujeet Kumar Thakur, Seera Raviteja, Tayur N. Guru Row, Sambasivan Venkat Eswaran","doi":"10.1155/2023/5580382","DOIUrl":"https://doi.org/10.1155/2023/5580382","url":null,"abstract":"Lignite humic acid on reaction with formaldehyde and aqueous alkali led to a polybicyclo[3.3.1]nonane. This was characterized spectroscopically using mass spectrometry, FT-IR, powder X-ray diffraction, TEM, and NMR studies (1H-NMR, CP-MAS-SS-NMR) which though challenging were useful for confirming the structure of the BCN polymer. The product showed an envelope peak in its MALDI-MS spectrum, based on which M ̅ n , M ̅ w , and polydispersity index have been calculated. Based on the NMR spectrum of intermediate, the presence of the N-formyl group has been shown in it. The new polymer could be useful in agriculture in water-deficient areas. Most papers on humic acids include only broad and general information like elemental analysis (occasionally TEM, SEM, TGA, DSC, etc.). Very complicated structures have been proposed by scientists earlier. Only in very recent years, it has been recognized that these are relatively small molecules which masquerade as supramolecular structures. It is pointed out that most papers do not put down the structure of the compound and provide no concrete proof for proposing such structures. The novelty of our work is that we have characterized the precise molecular weights based on mass spectrometry and NMR spectroscopy along with a well-defined structure. This is not the case in most other publications.","PeriodicalId":14283,"journal":{"name":"International Journal of Polymer Science","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136014389","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The creation of nanostructured materials with a triply periodic minimal surface (TPMS), defined as a zero mean curvature surface having periodicity in three-dimensional space, is an emerging solution to optimize transport (i.e., the ion-conductivity and hydraulic permeability) through the next-generation of electrolyte and ultrafiltration (UF) membranes. Here, we used an amphiphilic ABC-type block copolymer (BCP) (namely, polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) (PS-b-P2VP-b-PEO)) to generate symmetric thick films (~8 μm) composed entirely of a TPMS-based structure, consisting of a PS matrix with a double gyroid (DG) minimal surface and hydrophilic stimuli-responsive (P2VP/PEO) nanochannels. To produce the core/shell DG-structured monoliths, we used a process combining the nonsolvent-induced phase separation (NIPS) process with a solvent vapor annealing (SVA) treatment. From such symmetric ABC-type BCP-thick films generated by NIPS-SVA, a mean hydraulic permeability as high as 514 L h-1 m-2 bar-1 was measured. This mean value was revealed to be nearly equal to that of asymmetric PS-b-P2VP-b-PEO membranes manufactured by NIPS, which have a substructure with an implicit irregular and random distribution of the internal pore structure and a skin layer with P2VP/PEO nanopores arranged into a hexagonal array.
具有三周期最小表面(TPMS)的纳米结构材料的创造，被定义为在三维空间中具有周期性的零平均曲率表面，是通过下一代电解质和超滤膜优化传输(即离子电导率和水力渗透性)的新兴解决方案。在这里，我们使用两亲性的bc型嵌段共聚物(BCP)(即聚苯乙烯-嵌段聚(2-乙烯基吡啶)-嵌段聚(环氧乙烷)(PS-b-P2VP-b-PEO))生成完全由tpms结构组成的对称厚膜(~8 μm)，该结构由具有双回线(DG)最小表面的PS矩阵和亲水刺激响应(P2VP/PEO)纳米通道组成。为了制备核心/壳结构的dg结构单体，我们采用了非溶剂诱导相分离(NIPS)工艺和溶剂蒸汽退火(SVA)处理相结合的工艺。在NIPS-SVA生成的对称abc型bcp厚膜中，平均水力渗透率高达514 L h-1 m-2 bar-1。结果表明，该平均值与NIPS公司生产的不对称PS-b-P2VP-b-PEO膜的平均值几乎相等，后者的子结构具有隐式的不规则和随机分布的内部孔结构，皮层由P2VP/PEO纳米孔排列成六边形阵列。
{"title":"Nanoporous Double-Gyroid Structure from ABC Triblock Terpolymer Thick Films","authors":"Karim Aissou, Maximilien Coronas, Daniel Hermida-Merino, Eduardo Solano, Didier Cot, Stéphanie Roualdes, Denis Bouyer, Damien Quemener","doi":"10.1155/2023/9598572","DOIUrl":"https://doi.org/10.1155/2023/9598572","url":null,"abstract":"The creation of nanostructured materials with a triply periodic minimal surface (TPMS), defined as a zero mean curvature surface having periodicity in three-dimensional space, is an emerging solution to optimize transport (i.e., the ion-conductivity and hydraulic permeability) through the next-generation of electrolyte and ultrafiltration (UF) membranes. Here, we used an amphiphilic ABC-type block copolymer (BCP) (namely, polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) (PS-b-P2VP-b-PEO)) to generate symmetric thick films (~8 μm) composed entirely of a TPMS-based structure, consisting of a PS matrix with a double gyroid (DG) minimal surface and hydrophilic stimuli-responsive (P2VP/PEO) nanochannels. To produce the core/shell DG-structured monoliths, we used a process combining the nonsolvent-induced phase separation (NIPS) process with a solvent vapor annealing (SVA) treatment. From such symmetric ABC-type BCP-thick films generated by NIPS-SVA, a mean hydraulic permeability as high as 514 L h-1 m-2 bar-1 was measured. This mean value was revealed to be nearly equal to that of asymmetric PS-b-P2VP-b-PEO membranes manufactured by NIPS, which have a substructure with an implicit irregular and random distribution of the internal pore structure and a skin layer with P2VP/PEO nanopores arranged into a hexagonal array.","PeriodicalId":14283,"journal":{"name":"International Journal of Polymer Science","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-10-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136293865","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Gezahgn Gebremaryam, Kiran Shahapurkar, Venkatesh Chenrayan, Fadi Althoey, Haitham M. Hadidi, Manzoore Elahi M. Soudagar, Vineet Tirth, Ali Algahtani, Tawfiq Al-Mughanam, Abdulaziz H. Alghtani, H. C. Ananda Murthy
In the current investigation, the mechanical properties of epoxy composites reinforced with banana pseudostem fibres, specifically focusing on tensile and impact behaviour, are investigated. The manufacturing process employed the meticulous hand-lay-up technique to fabricate six distinct samples. These samples included various combinations of short and woven banana fibres, treated and untreated, as well as a hybrid configuration involving layers of woven and short fibres. A fixed weight ratio of 60% fibres to 40% epoxy matrix was maintained for consistency. To ensure optimal material integrity, a careful application of resin and hardener in a 10 : 1 weight ratio was layered, with each addition of fibre followed by thorough rolling to eliminate any potential bubbles. The density and void fraction of the resulting composites were meticulously assessed to gauge the influence of this layering approach. Additionally, an X-ray diffraction (XRD) analysis was conducted to ascertain the impact of the chemical treatment on the cellulose content of the fibres. Our findings revealed that the tensile and impact properties were notably superior in the woven fibre composites. In particular, the chemically treated woven banana fibre epoxy composite displayed impressive values of 64.95 MPa for tensile strength and 24.37 KJ/m2 for impact strength. To gain deeper insights into the structure-property relationship, test specimens were analyzed using scanning electron micrographs. Lastly, comparative analysis by mapping the tensile properties from our present work with those from existing studies was carried out.
{"title":"Influence of Layering Pattern, Fibre Architecture, and Alkalization on Physical, Mechanical, and Morphological Behaviour of Banana Fibre Epoxy Composites","authors":"Gezahgn Gebremaryam, Kiran Shahapurkar, Venkatesh Chenrayan, Fadi Althoey, Haitham M. Hadidi, Manzoore Elahi M. Soudagar, Vineet Tirth, Ali Algahtani, Tawfiq Al-Mughanam, Abdulaziz H. Alghtani, H. C. Ananda Murthy","doi":"10.1155/2023/6023056","DOIUrl":"https://doi.org/10.1155/2023/6023056","url":null,"abstract":"In the current investigation, the mechanical properties of epoxy composites reinforced with banana pseudostem fibres, specifically focusing on tensile and impact behaviour, are investigated. The manufacturing process employed the meticulous hand-lay-up technique to fabricate six distinct samples. These samples included various combinations of short and woven banana fibres, treated and untreated, as well as a hybrid configuration involving layers of woven and short fibres. A fixed weight ratio of 60% fibres to 40% epoxy matrix was maintained for consistency. To ensure optimal material integrity, a careful application of resin and hardener in a 10 : 1 weight ratio was layered, with each addition of fibre followed by thorough rolling to eliminate any potential bubbles. The density and void fraction of the resulting composites were meticulously assessed to gauge the influence of this layering approach. Additionally, an X-ray diffraction (XRD) analysis was conducted to ascertain the impact of the chemical treatment on the cellulose content of the fibres. Our findings revealed that the tensile and impact properties were notably superior in the woven fibre composites. In particular, the chemically treated woven banana fibre epoxy composite displayed impressive values of 64.95 MPa for tensile strength and 24.37 KJ/m2 for impact strength. To gain deeper insights into the structure-property relationship, test specimens were analyzed using scanning electron micrographs. Lastly, comparative analysis by mapping the tensile properties from our present work with those from existing studies was carried out.","PeriodicalId":14283,"journal":{"name":"International Journal of Polymer Science","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136279465","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Agriculture and textiles have the highest production yields among all sectors to meet mankind’s basic needs, i.e., feeding and clothing; however, they are top contributors to environmental pollution and global waste generation. Their wastes and byproducts are precious organic materials, they have great potential as raw materials for the manufacturing of valuable products. This review sheds light on various textile and agricultural wastes, waste management issues, and their existing utilization. Current waste processing methods are mostly based on waste-to-energy routes or material reclamation; however, both methods are hazardous for the environment and are inefficient. During the past decade, many researchers have utilized agriculture and textile wastes in the fabrication of composites. Textile and agricultural wastes and byproducts can be efficiently used for composite fabrication and can be suitable alternatives to existing raw materials. Using textiles and agricultural wastes for composite manufacturing can not only address waste management issues and replace non-eco-friendly materials in the composite industry but also significantly improve composite properties.
{"title":"Circularity in Materials: A Review on Polymer Composites Made from Agriculture and Textile Waste","authors":"Ali Raza Shafqat, Muzzamal Hussain, Yasir Nawab, Munir Ashraf, Sheraz Ahmad, Ghazia Batool","doi":"10.1155/2023/5872605","DOIUrl":"https://doi.org/10.1155/2023/5872605","url":null,"abstract":"Agriculture and textiles have the highest production yields among all sectors to meet mankind’s basic needs, i.e., feeding and clothing; however, they are top contributors to environmental pollution and global waste generation. Their wastes and byproducts are precious organic materials, they have great potential as raw materials for the manufacturing of valuable products. This review sheds light on various textile and agricultural wastes, waste management issues, and their existing utilization. Current waste processing methods are mostly based on waste-to-energy routes or material reclamation; however, both methods are hazardous for the environment and are inefficient. During the past decade, many researchers have utilized agriculture and textile wastes in the fabrication of composites. Textile and agricultural wastes and byproducts can be efficiently used for composite fabrication and can be suitable alternatives to existing raw materials. Using textiles and agricultural wastes for composite manufacturing can not only address waste management issues and replace non-eco-friendly materials in the composite industry but also significantly improve composite properties.","PeriodicalId":14283,"journal":{"name":"International Journal of Polymer Science","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-09-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134885334","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Wencai Wang, Jindong Zhang, Dongting Gao, Kun Yu, Gang Liu, Ming Wang, Jianan Yao
As the adhesive for composites, the resin matrix directly impacts the molding process and product performance of thermoplastic composites (TPCs). Carbon fiber-reinforced polyetherimide (CF/PEI) and polyaryletherketone (CF/PAEK) composites were prepared by a compression molding process. The interface, interlaminar, and low-speed impact properties of TPCs were studied. The results show that the interfacial shear strength of the CF/PEI composite is ~116 MPa, while the CF/PAEK composite is ~78 MPa. However, the interlaminar and low-speed impact performance of CF/PAEK is better than CF/PEI. Type I fracture toughness ( ) and type II fracture toughness ( ) of CF/PEI are ~1051 MPa and ~1060 MPa. But those of CF/PAEK are ~1786 MPa and ~2584 MPa, respectively. The compressive strength after the impact of CF/PAEK (~321 MPa) is 40% higher than CF/PEI (~230 MPa).
{"title":"The Effect of Resin Matrix on the Properties of CF/PEI and CF/PAEK Thermoplastic Composites","authors":"Wencai Wang, Jindong Zhang, Dongting Gao, Kun Yu, Gang Liu, Ming Wang, Jianan Yao","doi":"10.1155/2023/8407907","DOIUrl":"https://doi.org/10.1155/2023/8407907","url":null,"abstract":"As the adhesive for composites, the resin matrix directly impacts the molding process and product performance of thermoplastic composites (TPCs). Carbon fiber-reinforced polyetherimide (CF/PEI) and polyaryletherketone (CF/PAEK) composites were prepared by a compression molding process. The interface, interlaminar, and low-speed impact properties of TPCs were studied. The results show that the interfacial shear strength of the CF/PEI composite is ~116 MPa, while the CF/PAEK composite is ~78 MPa. However, the interlaminar and low-speed impact performance of CF/PAEK is better than CF/PEI. Type I fracture toughness ( <math xmlns=\"http://www.w3.org/1998/Math/MathML\" id=\"M1\"> <msub> <mrow> <mi>G</mi> </mrow> <mrow> <mtext>IC</mtext> </mrow> </msub> </math> ) and type II fracture toughness ( <math xmlns=\"http://www.w3.org/1998/Math/MathML\" id=\"M2\"> <msub> <mrow> <mi>G</mi> </mrow> <mrow> <mtext>IIC</mtext> </mrow> </msub> </math> ) of CF/PEI are ~1051 MPa and ~1060 MPa. But those of CF/PAEK are ~1786 MPa and ~2584 MPa, respectively. The compressive strength after the impact of CF/PAEK (~321 MPa) is 40% higher than CF/PEI (~230 MPa).","PeriodicalId":14283,"journal":{"name":"International Journal of Polymer Science","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-09-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135771020","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Akash Debnath, Md. Ashraful Alam, Ajoy Kanti Mondal, Md. Tushar Uddin, Md. Aftab Ali Shaikh, S. M. Asaduzzaman Sujan
Leather processing generates a huge amount of chromium (Cr) containing wastes, and one of them is chrome shavings (CS), which frequently end up in landfills. It may be harmful to the environment and human health due to the oxidation of Cr(III) to poisonous Cr(VI). Herein, CS and polyvinyl alcohol (PVA) are used for the preparation of flexible CS-PVA composite sheets, using CS as a skeletal and PVA as a cross-linker by a simple and facile technique. CS-PVA composite sheets are characterized by FT-IR, SEM, STA, and UTM. FT-IR analysis of CS-PVA composite sheets indicated the existence of dominating peaks corresponding to collagen amide bands as well as PVA characteristic bands, and it demonstrates the uniformity of the developed composite sheets. When the amount of PVA is increased, the tensile strength of CS-PVA composite sheets increases from 0.21 to 4.17 N/mm2. With increasing of the amount of PVA, the softness decreases from 6.47 to 3.7 mm, and SEM shows decreasing of pores in the composite sheet. The addition of more PVA makes CS-PVA composite sheets more thermally stable. This facile method of preparing CS-PVA composite sheet is low-cost and eco-friendly, having potential applications in various fields, including clothing, leather goods, decoration, packaging, and footwear products, as well as presenting promising platforms for effective utilization of industrial waste materials.
皮革加工会产生大量含铬废物，其中一种是铬屑(CS)，它们经常被填埋。由于铬(III)氧化为有毒的铬(VI)，可能对环境和人体健康有害。本文采用CS和聚乙烯醇(PVA)为骨架，PVA为交联剂，采用简单易行的工艺制备柔性CS-PVA复合片材。采用FT-IR、SEM、STA和UTM对CS-PVA复合板材进行了表征。对CS-PVA复合片进行FT-IR分析，发现存在胶原酰胺带和PVA特征带对应的主导峰，表明复合片的均匀性。随着PVA用量的增加，CS-PVA复合片材的抗拉强度由0.21 N/mm2提高到4.17 N/mm2。随着PVA用量的增加，复合材料的柔软度从6.47 mm下降到3.7 mm, SEM显示复合材料的孔隙减少。添加更多的PVA使CS-PVA复合片材的热稳定性更高。这种简单的制备CS-PVA复合片材的方法成本低，环保，在服装、皮革制品、装饰、包装、鞋类等各个领域都有潜在的应用前景，同时也为工业废料的有效利用提供了有前景的平台。
{"title":"Development of Flexible Composite Sheet with Chrome Shavings Using Polyvinyl Alcohol as a Cross-Linker","authors":"Akash Debnath, Md. Ashraful Alam, Ajoy Kanti Mondal, Md. Tushar Uddin, Md. Aftab Ali Shaikh, S. M. Asaduzzaman Sujan","doi":"10.1155/2023/6694850","DOIUrl":"https://doi.org/10.1155/2023/6694850","url":null,"abstract":"Leather processing generates a huge amount of chromium (Cr) containing wastes, and one of them is chrome shavings (CS), which frequently end up in landfills. It may be harmful to the environment and human health due to the oxidation of Cr(III) to poisonous Cr(VI). Herein, CS and polyvinyl alcohol (PVA) are used for the preparation of flexible CS-PVA composite sheets, using CS as a skeletal and PVA as a cross-linker by a simple and facile technique. CS-PVA composite sheets are characterized by FT-IR, SEM, STA, and UTM. FT-IR analysis of CS-PVA composite sheets indicated the existence of dominating peaks corresponding to collagen amide bands as well as PVA characteristic bands, and it demonstrates the uniformity of the developed composite sheets. When the amount of PVA is increased, the tensile strength of CS-PVA composite sheets increases from 0.21 to 4.17 N/mm2. With increasing of the amount of PVA, the softness decreases from 6.47 to 3.7 mm, and SEM shows decreasing of pores in the composite sheet. The addition of more PVA makes CS-PVA composite sheets more thermally stable. This facile method of preparing CS-PVA composite sheet is low-cost and eco-friendly, having potential applications in various fields, including clothing, leather goods, decoration, packaging, and footwear products, as well as presenting promising platforms for effective utilization of industrial waste materials.","PeriodicalId":14283,"journal":{"name":"International Journal of Polymer Science","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135878869","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Issahaku Ahmed, Esi Awuah, Helen M. K. Essandoh, Sampson Oduro-Kwarteng, Dennis Ofori-Amanfo, Florence Cobbold, Joshua Oduro-Adu
The search for alternative solutions for sustainable management of faecal sludge in the area of dewatering with biocoagulants/bioflocculants remains unfulfilled. Some available and accessible indigenous plants in the northern part of Ghana have been characterised and subsequently evaluated in their suitability for use as biocoagulant/bioflocculants. The Yila (Crossopteryx febrifuga) and the Voulo (Grewia mollis) plants were the indigenous plants used in this study. Three applications from the Yila wooden stem, the Yila bark, and the Voulo at different treatment concentrations with faecal sludge were monitored. The Yila wooden stem gave a potential of pollutant removal up to about 83.99%, 93.79%, and 91.54% for Chemical Oxygen Demand (COD), Total Suspended Solids (TSS), and turbidity, respectively. Application of the Yila bark gave a respective removal efficiency of up to about 77.39%, 82.02%, and 54.60% for COD, TSS, and turbidity. The efficiency of the Voulo plant obtained for COD, TSS, and turbidity was up to about 80.43%, 86.83%, and 72.55%, respectively. No cyanogenic or toxic compounds were identified in the characterised raw materials used for this study. The study has revealed the potential of producing biocoagulants that can perform as effectively as synthetic/chemical coagulants using locally natural raw materials but the use of it at large scale will only be applicable for batch or semi-batch systems. Some interesting constituents identified in the plants under consideration, such as trialkyl bismuthine and furan derivative, can open up opportunities to elucidate the potential applications of these identified plants in the areas of pharmaceuticals, cosmetics, glass and ceramics, rubber production, and other applicable medicinal advantageous areas.
{"title":"Development, Characterisation, and Performance Evaluation of Some Indigenous Plants for Faecal Sludge Treatment in Ghana","authors":"Issahaku Ahmed, Esi Awuah, Helen M. K. Essandoh, Sampson Oduro-Kwarteng, Dennis Ofori-Amanfo, Florence Cobbold, Joshua Oduro-Adu","doi":"10.1155/2023/7470378","DOIUrl":"https://doi.org/10.1155/2023/7470378","url":null,"abstract":"The search for alternative solutions for sustainable management of faecal sludge in the area of dewatering with biocoagulants/bioflocculants remains unfulfilled. Some available and accessible indigenous plants in the northern part of Ghana have been characterised and subsequently evaluated in their suitability for use as biocoagulant/bioflocculants. The Yila (Crossopteryx febrifuga) and the Voulo (Grewia mollis) plants were the indigenous plants used in this study. Three applications from the Yila wooden stem, the Yila bark, and the Voulo at different treatment concentrations with faecal sludge were monitored. The Yila wooden stem gave a potential of pollutant removal up to about 83.99%, 93.79%, and 91.54% for Chemical Oxygen Demand (COD), Total Suspended Solids (TSS), and turbidity, respectively. Application of the Yila bark gave a respective removal efficiency of up to about 77.39%, 82.02%, and 54.60% for COD, TSS, and turbidity. The efficiency of the Voulo plant obtained for COD, TSS, and turbidity was up to about 80.43%, 86.83%, and 72.55%, respectively. No cyanogenic or toxic compounds were identified in the characterised raw materials used for this study. The study has revealed the potential of producing biocoagulants that can perform as effectively as synthetic/chemical coagulants using locally natural raw materials but the use of it at large scale will only be applicable for batch or semi-batch systems. Some interesting constituents identified in the plants under consideration, such as trialkyl bismuthine and furan derivative, can open up opportunities to elucidate the potential applications of these identified plants in the areas of pharmaceuticals, cosmetics, glass and ceramics, rubber production, and other applicable medicinal advantageous areas.","PeriodicalId":14283,"journal":{"name":"International Journal of Polymer Science","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-09-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135938017","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Plastics are ubiquitous in our daily life. However, the use of petrochemical-based plastic as packaging materials causes the depletion of non-renewable resources, thereby leading to an increase in oil prices and economic crises. Moreover, these petrochemical plastics raise the issue of environmental pollution due to their non-biodegradability. Owing to this, there is a need to develop an alternative biodegradable and eco-friendly packing material. Agar, which is extracted from seaweeds, is one of the abundantly available polymers. However, moderate tensile strength and thermal stability restrict its application. As a step forward, agar/reduced graphene oxide (RGO) composites were prepared by in situ reduction of GO in the polymer matrix. The tensile strength of the composite was found to increase by 55% at 2% RGO loading. The electrical conductivity and thermal properties of the composite were also improved. The presence of conductivity suggested that apart from packaging, agar/RGO composites can also have potential applications as capacitor plates creating a supercapacitor and as electric field-induced wound healing material.
{"title":"Preparation of Biodegradable Reduced Graphene Oxide/Agar Composites by In Situ Reduction of Graphene Oxide","authors":"Mezigebu Belay","doi":"10.1155/2023/4583522","DOIUrl":"https://doi.org/10.1155/2023/4583522","url":null,"abstract":"Plastics are ubiquitous in our daily life. However, the use of petrochemical-based plastic as packaging materials causes the depletion of non-renewable resources, thereby leading to an increase in oil prices and economic crises. Moreover, these petrochemical plastics raise the issue of environmental pollution due to their non-biodegradability. Owing to this, there is a need to develop an alternative biodegradable and eco-friendly packing material. Agar, which is extracted from seaweeds, is one of the abundantly available polymers. However, moderate tensile strength and thermal stability restrict its application. As a step forward, agar/reduced graphene oxide (RGO) composites were prepared by in situ reduction of GO in the polymer matrix. The tensile strength of the composite was found to increase by 55% at 2% RGO loading. The electrical conductivity and thermal properties of the composite were also improved. The presence of conductivity suggested that apart from packaging, agar/RGO composites can also have potential applications as capacitor plates creating a supercapacitor and as electric field-induced wound healing material.","PeriodicalId":14283,"journal":{"name":"International Journal of Polymer Science","volume":null,"pages":null},"PeriodicalIF":3.3,"publicationDate":"2023-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41445035","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Farooq Rauf, M. Umair, K. Shaker, Yasir Nawab, Tehseen Ullah, Sheraz Ahmad
A sustainable approach to composites is leading to the use of natural fibers rather than synthetic materials, like carbon or glass, for reinforcement. However, the higher moisture absorption of natural fibers impairs the composite’s mechanical properties. Therefore, to improve the mechanical properties, some chemical treatments like silane and fluorocarbon can be performed to reduce the moisture absorption of natural fibers. In this study, flax was used as reinforcement, and epoxy was used as a matrix. In the first part of the study, flax reinforcement was treated with different concentrations of silane (20, 40, and 60 g/L) and fluorocarbons (80, 100, and 120 g/L). Moisture regains (MRs), absorbency, and tensile strength were measured at reinforcement levels. According to the results, reinforcements treated with 60 g/L silane (S3) and 120 g/L fluorocarbons (F3) exhibited the lowest MR values of 7.09% and 3.06%, respectively, whereas water absorbency was significantly reduced. The sample treated with 120 g/L fluorocarbons required 300 seconds extra time to absorb the water as compared with the untreated sample, whereas samples S3 and F3 showed an increase in tensile strength by 20.16% and 34.80% when compared with untreated reinforcement flax reinforcement. In the second part of the study, untreated and treated flax reinforcements were combined with an epoxy matrix for composite fabrication. MR and mechanical tests (tensile, flexural, and Charpy impact tests) were performed. Results revealed that treated flax-reinforced composites exhibited lower MR values 0.86% for F3 and 0.42% for S3, respectively. The tensile, flexural, and pendulum impact strengths of silane-treated reinforced composite sample C.S3 were increased by 15.07%, 117%, and 20.01%, respectively, compared with untreated reinforced composite samples. Consequently, both chemical treatments improve composite mechanical performance as well as service life.
{"title":"Investigation of Chemical Treatments to Enhance the Mechanical Properties of Natural Fiber Composites","authors":"Farooq Rauf, M. Umair, K. Shaker, Yasir Nawab, Tehseen Ullah, Sheraz Ahmad","doi":"10.1155/2023/4719481","DOIUrl":"https://doi.org/10.1155/2023/4719481","url":null,"abstract":"A sustainable approach to composites is leading to the use of natural fibers rather than synthetic materials, like carbon or glass, for reinforcement. However, the higher moisture absorption of natural fibers impairs the composite’s mechanical properties. Therefore, to improve the mechanical properties, some chemical treatments like silane and fluorocarbon can be performed to reduce the moisture absorption of natural fibers. In this study, flax was used as reinforcement, and epoxy was used as a matrix. In the first part of the study, flax reinforcement was treated with different concentrations of silane (20, 40, and 60 g/L) and fluorocarbons (80, 100, and 120 g/L). Moisture regains (MRs), absorbency, and tensile strength were measured at reinforcement levels. According to the results, reinforcements treated with 60 g/L silane (S3) and 120 g/L fluorocarbons (F3) exhibited the lowest MR values of 7.09% and 3.06%, respectively, whereas water absorbency was significantly reduced. The sample treated with 120 g/L fluorocarbons required 300 seconds extra time to absorb the water as compared with the untreated sample, whereas samples S3 and F3 showed an increase in tensile strength by 20.16% and 34.80% when compared with untreated reinforcement flax reinforcement. In the second part of the study, untreated and treated flax reinforcements were combined with an epoxy matrix for composite fabrication. MR and mechanical tests (tensile, flexural, and Charpy impact tests) were performed. Results revealed that treated flax-reinforced composites exhibited lower MR values 0.86% for F3 and 0.42% for S3, respectively. The tensile, flexural, and pendulum impact strengths of silane-treated reinforced composite sample C.S3 were increased by 15.07%, 117%, and 20.01%, respectively, compared with untreated reinforced composite samples. Consequently, both chemical treatments improve composite mechanical performance as well as service life.","PeriodicalId":14283,"journal":{"name":"International Journal of Polymer Science","volume":null,"pages":null},"PeriodicalIF":3.3,"publicationDate":"2023-07-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46870208","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
C. Castro-Guerrero, A. Gonzalez-Benitez, Abisaí Rodríguez-Rodríguez, F. Delgado-Arroyo, U. León-Silva, A. Morales‐Cepeda, F. Lopez-Gonzalez, Arturo Rodas-Grapaín, M. R. Díaz-Guillén
Cellulose nanocrystals (CNCs) are a very versatile material, and optimizing the reaction conditions to obtain them is vital for cost savings, purity, selectivity, or performance. In this study, the reaction conditions of the CNCs were tested, as well as their application as binders for the fabrication of electrodes of a symmetric capacitor (based on activated carbon). The resulting CNCs were physicochemically characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction, atomic force microscopy, and its capacitive properties using cyclic voltammetry (CV). It was found that the best reaction conditions were at 45°C, 30 and 45 minutes, and 64 wt%. The CNCs were used as a binder, as they conferred stability to the electrodes and prevented the crumbling of the activated carbon electrodes. The CV measurements showed a capacitor behavior; CNCs can be used in energy storage applications.
{"title":"Optimization of the Synthesis Parameters and Application of Cellulose Nanocrystals as Binders in Capacitors","authors":"C. Castro-Guerrero, A. Gonzalez-Benitez, Abisaí Rodríguez-Rodríguez, F. Delgado-Arroyo, U. León-Silva, A. Morales‐Cepeda, F. Lopez-Gonzalez, Arturo Rodas-Grapaín, M. R. Díaz-Guillén","doi":"10.1155/2023/2842385","DOIUrl":"https://doi.org/10.1155/2023/2842385","url":null,"abstract":"Cellulose nanocrystals (CNCs) are a very versatile material, and optimizing the reaction conditions to obtain them is vital for cost savings, purity, selectivity, or performance. In this study, the reaction conditions of the CNCs were tested, as well as their application as binders for the fabrication of electrodes of a symmetric capacitor (based on activated carbon). The resulting CNCs were physicochemically characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction, atomic force microscopy, and its capacitive properties using cyclic voltammetry (CV). It was found that the best reaction conditions were at 45°C, 30 and 45 minutes, and 64 wt%. The CNCs were used as a binder, as they conferred stability to the electrodes and prevented the crumbling of the activated carbon electrodes. The CV measurements showed a capacitor behavior; CNCs can be used in energy storage applications.","PeriodicalId":14283,"journal":{"name":"International Journal of Polymer Science","volume":null,"pages":null},"PeriodicalIF":3.3,"publicationDate":"2023-07-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44273199","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：