Journal of Dental Research, Dental Clinics, Dental Prospects最新文献

Background: Endodontic infections caused by remaining biofilm following disinfection with chemical fluids encourage secondary bacterial infection; hence, employing laser pulses to activate the fluids is advised to improve microbial biofilm clearance. This study investigated the performance of Er,Cr:YSGG laser in photon-induced photoacoustic streaming (PIPS) agitation of 5.25% sodium hypochlorite (NaOCl) to enhance the removal of mature Enterococcus faecalis (E. faecalis) biofilms in complex root canal systems.

Methods: The mesial roots of the lower first and second molars were separated and inoculated with E. faecalis bacteria for 30 days. The roots were irrigated with 5.25% NaOCl, some of them were agitated with passive ultrasonic irrigation (PUI), and the other roots were agitated by Er,Cr:YSGG laser using PIPS at 60 µs/pulse, 5 Hz, and 0.25, 0.5, 0.75, 1, and 1.25 W. An atomic force microscope (AFM) was used as a new method to obtain the results in the isthmus area; the results that have been obtained from each group were compared with each other. ANOVA was utilized to compare the means of the test groups.

Results: Based on the AFM and SEM analyses, laser agitation and passive ultrasonic activation groups have shown higher antimicrobial efficacy than the conventional syringe irrigation group (P<0.05).

Conclusion: Based on the findings of this investigation, the agitation of 5.25% NaOCl solution by Er,Cr:YSGG laser in PIPS at (60 µs/pulse, 5 Hz, 1.25 W) offers better mature bacterial biofilm removal in the mesial root of lower human molars than the same irrigant with syringe irrigation and passive ultrasonic activation technique.

Background. The study aimed to compare the airway morphology and hyoid bone position in children undergoing adenoidectomy or adenotonsillectomy with healthy individuals with no skeletal problems in similar age and development period. Methods. The subjects in the study were divided into three groups. These groups were defined as those having undergone adenoidectomy (53 children), those having undergone adenotonsillectomy (48 children), and the systemically healthy control group (63 children). Seventeen pharyngeal airway, nine hyoid, and four area measurements were used in the cephalometric radiographs of the children in all the groups. One-way analysis of variance was used to evaluate the children in each group. In addition, Tukey tests were used for a bilateral comparison of significant parameters. The results were considered statistically significant at P<0.05. Results. The mean age of 164 patients in the study group was 12.76±2.85 years. The vertical airway length significantly decreased in the adenotonsillectomy group compared to other groups, while the epiglottic pharyngeal length significantly increased in the former than in the latter (P<0.05). The area measurements showed that although the oropharynx area significantly increased in the adenotonsillectomy group compared to other groups, the hypopharynx and total area measurements were significantly different compared with the control group (P<0.05). No statistically significant difference was found between the three groups in all measurements of the hyoid bone position (P>0.05). Conclusion. The study showed that adenotonsillectomy operations caused more increases in the oropharynx and hypopharynx parts of the pharyngeal airway. Adenoidectomy and adenotonsillectomy operations did not contribute significantly to the hyoid bone position.

Background: The present study assessed the quality of images and the presence of marginal gaps on cone-beam computed tomography (CBCT) images of teeth restored with all-ceramic and metal-ceramic crowns and compared the gap sizes observed on CBCT images with those obtained on micro-CT images.

Methods: Thirty teeth restored with metal-ceramic and all-ceramic crowns, properly adapted and with gaps of 0.30 and 0.50 mm, were submitted to micro-CT and CBCT scans. Linear measurements corresponding to the marginal gap (MG) and the absolute marginal discrepancy (AMD) were obtained. The objective assessment of the quality of CBCT images was performed using the contrast-to-noise ratio (CNR), and the subjective assessment was defined by the diagnoses made by five examiners regarding the presence or absence of gaps.

Results: The measurements were always higher for CBCT, with a significant difference regarding AMD. No significant difference in image quality was observed using CNR between the crowns tested. Low accuracy and sensitivity values could be observed for both crowns.

Conclusion: Marginal mismatch measures were overestimated in CBCT images. No difference in image quality was observed between the crowns. The correct diagnosis of gaps was considered low, irrespective of crown type and gap size.

Background. This study evaluated the combined effects of silver nanoparticles (AgNPs) and chitosan on the dentin bond strength of resin-based root canal sealers using the push-out test and scanning electron microscopy (SEM). Methods. This in vitro study was conducted on 72 extracted mandibular premolar teeth. All the teeth were decoronated perpendicular to the long axis to leave a 13-mm root length. The root canals were prepared, and the samples were randomly divided into seven experimental groups and one control group based on final irrigation solutions. All the final irrigation procedures were performed for one minute. The root canals were dried using paper points and filled with a resin-based sealer and gutta-percha points using a lateral condensation technique. Sections measuring 2 mm in thickness were taken from the apical, middle, and coronal thirds of each root using a cutting machine. The push-out test was performed using a universal testing machine. Results. The solution of AgNPs combined with 0.4% chitosan showed higher bond strength in the coronal region than a combination with 0.2% chitosan. Samples treated with 0.4% chitosan solution exhibited a higher bond strength than the 0.2% chitosan group. There were no significant differences between chlorhexidine (CHX) solution alone and in combination with 0.2% or 0.4% chitosan solution. Conclusion. The combination of chitosan and AgNPs was as effective as CHX in improving the bond strength of resin-based sealers.

Background. Establishing an accurate occlusal vertical dimension (OVD) is a crucial clinical step during full-mouth rehabilitation. Various techniques have been suggested to evaluate OVD, but none of them is practically reliable, and each one has its shortcomings. The correlation between facial proportions and the lower third of the face is a reliable method but needs to be verified in many ethnic groups. Therefore, this study aimed to determine the correlation between OVD and various facial measurements in a Tunisian ethnic group. Methods. A cross-sectional study was conducted between November 2020 to January 2021. The participants were randomly selected from dental students, dental surgeons, and the patients referring to the University Dental Clinic for dental treatments. Seven facial measurements were clinically recorded using a digital caliper. The correlation between OVD and facial measurements was analyzed using Spearman's coefficient and linear regression analysis. Results. A total of 201 dentate participants (134 females and 67 males) were included in the study. The mean OVD in male subjects was higher (67.60±4.49) compared to female subjects (60.72±3.84). The total facial height was positively correlated with OVD in both genders. OVD was statistically correlated with the height of the upper lip. This correlation was highly significant in males while it was weak in the female group. Conclusion. Facial proportions and linear equations are non-invasive, simple, and reliable methods to predict OVD, especially in males.

Background. Temporomandibular disorders have common signs and symptoms, including pain in the masticatory muscles, limitation or deviation in a mandibular range of motion, and other common patient complaints, such as headache and earache. The main focus of this study was to collect comprehensive and integrated data on the effect of the posterior stop on temporomandibular joint disorders, as well as prevention, treatment, and follow-up care for the patients. Methods. The authors conducted the search in PubMed, SCOPUS, Web of Science, Cochrane Library, CINHAL, Medline, ProQuest, Google Scholar, Magiran, IranDoc, SID, and Iranmedex databases for relevant articles. A list of selected study sources, related conferences, and grey literature were manually searched in addition to the databases mentioned above. A 21-year time limit was imposed (2000-2021). Results. Finally, 16 articles were selected to be reviewed in this systematic review. The designs of the included studies were heterogeneous, and due to the low number of studies covered, the authors could not carry out a meta-analysis. Conclusion. The causes of temporomandibular disorders are multifactorial and complex. Therefore, it is difficult to investigate the relationship between this disorder and predictors. The results of the present study indicate that to determine the effect of the posterior stop on temporomandibular joint disorders, more clinical trials and case-control studies should be conducted.

Background. This experimental study sought to assess the biocompatibility of Resil, an experimental epoxy resin-based sealer, in comparison with AH26 and AH-Plus sealers in rats. Methods. Twelve male Wistar rats weighing 400 to 500 grams were evaluated in this experimental study. Four polyethylene tubes containing Resil, AH-Plus, AH26 sealers, and an empty tube were implanted subcutaneously in rats. The degree of inflammation, type of inflammatory cells present, foreign body reaction, quality of connective tissue, and presence of fibrotic capsule were evaluated histopathologically at 7 and 30 days after implanting the tubes to assess the biocompatibility of sealers. Data were analyzed using the Chi-square test. Results. At 7 days, the degree of inflammation in Resil group was almost similar to AH26 group, and 66.7% of rats showed moderate inflammation. AH-Plus group showed less inflammation than Resil and AH26 (50% of rats showed low degree of inflammation), At 30 days, the inflammatory status of all groups was the same, and 83.3% of rats showed very low degree of inflammation. The inflammatory response during the experiment decreased from day 7 to day 30 in all groups. The neutrophil count (P=0.00), fibrotic capsule (P=0.01) and the amount of granulation tissue (P=0.05) significantly decreased from day 7 to day 30 in Resil group. Conclusion. Resil sealer showed appropriate biocompatibility at 7 and 30 days after subcutaneous implantation in rats, comparable to AH26 and AH-Plus. Clinical studies are required to confirm these results.

Background. The bond strength of the materials used as a cervical barrier in the pulp regeneration is essential for the success of treatment. This study aimed to evaluate the effects of triple antibiotic paste (TAP), double antibiotic paste (DAP), and simvastatin as intracanal medicaments on the dislodgement resistance of mineral trioxide aggregate (MTA) and calcium-enriched mixture (CEM). Methods. A total of 160 extracted human single-rooted teeth were selected, and root canal preparation was carried out. The teeth in each group were randomly divided into four subgroups: TAP, DAP, simvastatin, and the control group (without intracanal medicament). Four weeks after placing the medicaments, it was removed by sodium hypochlorite, and MTA and CEM were placed in the coronal third of the root canals. After a week, 2-mm-thick dentin disks were prepared from the coronal third of the roots, and the push-out test was performed using a universal testing machine. The data were analyzed using two-way ANOVA and independent t-test at a significance level of 0.05. Results. Regardless of the intracanal medicament, there was no significant difference between the overall bond strength of MTA (59.3±10 MPa) and CEM (55.8±11 MPa) (P=0.6). Furthermore, there were no significant differences in bond strength between the two intracanal medicament groups and the control group (P>0.05). Conclusion. Under the limitations of the current study, DAP, simvastatin, and TAP, as intracanal medicaments, did not adversely affect the push-out bond strength of CEM and MTA.

Background: Implant-supported cantilever prostheses enable a more straightforward rehabilitation and may be a therapeutic option to reduce treatment morbidity, costs, and time. This study evaluated the clinical outcomes of fixed implant-supported partial dentures made of monolithic zirconia with a cantilever design to replace missing posterior teeth.

Methods: Fifteen partially edentulous patients received 34 implants and were provided with 16 zirconia fixed partial prostheses (FPPs) with one cantilever extension replacing mandibular or maxillary missing posterior and lateral teeth. Patients were re-examined for up to 4 years. Patient ages ranged from 41 to 65 years, with a mean age of 53±12 years; 47% were female, and 53% were male. The patients were observed for a mean period of 42±6 months with a minimum of 3 years and a maximum of 4 years.

Results: Peri-implantitis was observed in two cases. No chipping or fracture of any FPP was detected. Loosening of the abutment screw was a technical complication in one case. The rehabilitation survival rate was 100%. Implant-supported zirconia FPP with one mesial cantilever extension provides an aesthetic, functional treatment alternative to replace missing molars, premolars, and canines. These excellent clinical outcomes occurred over a mean observation time of 42±6 months.

Conclusion: Using monolithic zirconia milled with CAD-CAM technology might be an alternative to the metal-ceramic restoration in implant-supported FPP with one cantilever.

Background. Chemical agents, in combination with mechanical methods, play an important role in reducing microbial plaque on denture surfaces. However, these methods might change the mechanical behavior of acrylic resins, including microhardness and surface roughness. This in vitro study investigated the effect of two disinfectants, i.e., water and sodium hypochlorite, on the microhardness of conventional heat-cured and TiO₂ nanoparticle-reinforced acrylic resins. Methods. Sixty acrylic resin specimens were divided into two groups, and the samples in each group were randomly assigned to three subgroups (n=10). Heat-cured specimens and 1 wt% TiO₂ acrylic resin were prepared and immersed in three solutions: water, a solution prepared with NatureDent pills, and 1% sodium hypochlorite for 30, 60, and 90 days. Microhardness tests were performed on each sample at each immersion stage. The data were analyzed using descriptive statistical methods, three-way and one-way ANOVA, repeated-measures t test, and Tukey HSD tests using SPSS 17. P values<0.05 were considered significant. Results. All three independent parameters, including resin, solution, and time, significantly affected microhardness (P<0.05). The microhardness of both specimen types, i.e., conventional heat-cured and TiO₂ nanoparticle-reinforced acrylic resins, immersed for 30, 60, and 90 days, was the highest and lowest in water and hypochlorite solutions, respectively. Regarding 90 days, the microhardness values of conventional heat-cured and TiO₂ nanoparticle-reinforced acrylic resins were 17.050±0.094 and 19.953±0.053 in water, 15.675±0.069 and 18.965±0.037 in hypochlorite, and 16.713±0.122 and 19.39±20.113 in NatureDent solutions, respectively. Conclusion. Disinfecting two types of acrylic resin specimens decreased their microhardness as a function of immersion time for up to 90 days in the three solutions. However, the magnitude of hardness lost was less for TiO₂ nanoparticles-reinforced acrylic resin.