Journal of Environmental Science and Health Part A-toxic\/hazardous Substances & Environmental Engineering最新文献

The mismanagement of consumer-discarded plastic waste (CDPW) has raised global environmental concerns about climate change. The COVID-19 outbreak has generated ∼1.6 million tons of plastic waste per day in the form of personal protective equipment (masks, gloves, face shields, and sanitizer bottles). These plastic wastes are either combustible or openly dumped in aquatic and terrestrial environments. Open dumping upsurges emerging contaminants like micro-nano plastics (MNPs) that directly enter the ecosystem and cause severe impacts on flora and fauna. Therefore, it has become an utmost priority to determine sustainable technologies that can degrade or treat MNPs from the environment. The present review assesses the sources and impacts of MNPs, various challenges, and issues associated with their remediation techniques. Accordingly, a novel sustainable circular model is recommended to increase the degradation efficiency of MNPs using biochemical and biological methods. It is also concluded that the proposed model does not only overcome environmental issues but also provides a sustainable secondary resource to meet the sustainable development goals (SDGs).

This study evaluated the association of heavy metals (HMs) and effect biomarkers (inflammation, oxidative stress/antioxidant capacity and DNA damage) among people living with HIV/AIDS (PHWHA) in Niger Delta area, Nigeria. Blood levels of lead (BPb), cadmium (BCd), copper (BCu), zinc (BZn), iron (BFe), C-reactive protein (CRP), Interleukin-6 (IL-6), Tumor necrosis factor-α (TNF-α), Interferon-γ (IFN-γ), Malondialdehyde (MDA), Glutathione (GSH) and 8-hydroxy-2-deoxyguanosine (8-OHdG) were determined in a total of 185 participants, 104 HIV-positive and 81 HIV-negative sampled in both Niger Delta and non-Niger Delta regions. BCd (p < 0.001) and BPb (p = 0.139) were higher in HIV-positive subjects compared to HIV-negative controls; on the contrary, BCu, BZn and BFe levels were lower (p < 0.001) in HIV-positive subjects compared to HIV-negative controls. The Niger Delta population had higher levels of heavy metals (p < 0.01) compared to non-Niger Delta residents. CRP and 8-OHdG were higher (p < 0.001) in HIV-positive than in HIV-negative subjects and in Niger-Delta than in non-Niger Delta residents. BCu had significant positive dose-response relationship with CRP (61.9%, p = 0.063) and GSH (1.64%, p = 0.035) levels in HIV-positive subjects, and negative response with MDA levels (26.6%, p < 0.001). Periodic assessment of HMs levels among PLWHA is recommended.

We, the Editor and Publisher of Journal of Environmental Science and Health, Part A, together with the authors, have retracted the following article:Jesús Gabriel Rangel-Peraza, Edith Padilla-Gasca, Yaneth A. Bustos-Terrones. Surface response methodology for optimizing the degradation kinetics and efficiency removal of sulfamethazine in a UV/S2O8 2- oxidation process. Journal of Environmental Science and Health, Part A 2020; 55: Latest Articles.https://doi.org/10.1080/10934529.2020.1797384The authors of this article requested retraction, noting that they had omitted an author and that their research contained data without proper authorization from the owner.We have been informed in our decision-making by our policy on publishing ethics and integrity and the COPE guidelines on retractions.The retracted article will remain online to maintain the scholarly record, but it will be digitally watermarked on each page as 'Retracted'.

Molecularly imprinted polymers (MIPs) are synthetic polymers with predetermined selectivity for a given analyte. One major problem associated with MIPs is the inaccessibility of a large fraction of the recognition sites that remain buried within the polymeric matrix. To address this problem, the high selectivity imparted by the imprinting technique and the porosity of three-dimensional (3D) graphene oxide (GO)-based porous materials were utilized in this work to prepare a 3D GO-based Cu(II)-ion-imprinted material (hereafter denoted as IIM) via one-pot reactions of GO, chitosan (CS), and glutaraldehyde in the presence of Cu(II). Results of equilibrium binding experiments show that IIM has a high template-ion binding capacity (1.75 mmol g^-1) and good imprinting factor (2.19). Further, results of selectivity tests indicate that IIM has a high Cu(II)-recognition ability. IIM also has a fast binding rate and satisfactory reusability. In addition, the Langmuir isotherm model was well fitted with the experimental data, indicating the monolayer adsorption of Cu(II) ions. The present work provided a convenient approach to prepare 3D GO-based imprinted materials that are promising for enrichment or recycling of target compounds from wastewater.

Given the severe effects that toxic compounds present in wastewater streams have on humans, it is imperative that water and wastewater streams pollution be addressed globally. This review comprehensively examines various water and wastewater treatment methods and water quality management methods based on artificial intelligence (AI). Machine learning (ML) and AI have become a powerful tool for addressing problems in the real world and has gained a lot of interest since it can be used for a wide range of activities. The foundation of ML techniques involves training of a network with collected data, followed by application of learned network to the process simulation and prediction. The creation of ML models for process simulations requires measured data. In order to forecast and simulate chemical and physical processes such chemical reactions, heat transfer, mass transfer, energy, pharmaceutics and separation, a variety of machine-learning algorithms have recently been developed. These models have shown to be more adept at simulating and modeling processes than traditional models. Although AI offers many advantages, a number of disadvantages have kept these methods from being extensively applied in actual water treatment systems. Lack of evidence of application in actual water treatment scenarios, poor repeatability and data availability and selection are a few of the main problems that need to be resolved.

As the carrier of various inorganics and organics from various media, micro(nano)plastics have an impact on the environment and human health. Recently, many studies have examined the sorption of various organics including antibiotics. However, while vitamins have critical roles in the environment and microsystems from humans to plant life, the sorption of vitamins onto micro(nano)plastics are still uninvestigated. Therefore, the aim of this study was to examine the sorption of vitamin B1 onto various micro(nano)plastics from food packages under different pHs using batch technique; sorption kinetics and isotherms models were investigated as well. The results indicated that higher capacities were obtained between 360 min to 1440 min in polypropylene and polyethylene micro(nano)plastics, and similar kinetic behaviors observed in different pHs. However, the sorption responses (sorption capacity, equilibrium time) of polyethylene terephthalate and polystyrene were varied. The sorption kinetics between vitamin B1 and micro(nano)plastics showed that the pseudo-first-order model was better to fit for polyethylene terephthalate and polystyrene compared to the pseudo-second-order kinetics, however it was changed for polypropylene and polyethylene. Moreover, the obtained results suggest a complex nature of vitamin B1 sorption, including both chemical and physical sorption occur under various pHs and polymer types.

Here, we determined the concentrations of Pb, Ni, Zn and Fe in the soil and in vegetative organs of stinging nettle (Urtica dioica) collected from the banks of the Drenica River in the vicinity of the Ferronikeli smelter. The results were compared with samples collected from the banks 20 km (Shalë village) upriver. In addition, the bioaccumulation factor (BCF) and translocation factor (TF) were determined. Meanwhile, to evaluate the level of pollution in the study area was used the contamination factor (CF), potential ecological risk factor ($E_r^i$) and the potential ecological risk index (RI). The order of heavy metals according to their concentration in the soil samples at both sampling sites was as follows: Fe > Ni > Zn > Pb. Concentrations in excess of the limits allowed for soils in the samples collected in the vicinity of the smelter were recorded for Pb (173.13 mg kg^-1), Zn (1217.48 mg kg^-1), and Ni (1443.93 mg kg^-1), while at the control site, Zn (270.82 mg kg^-1) and Ni (375.47 mg kg^-1) were found in excess concentrations. But lead (Pb) level was under allowed limit. The data showed that the stinging nettle is not a hyperaccumulator because BCF < 1 at both sites for all metals under study. Furthermore, analysis of the translocation factor (TF_steam/root) showed that at low of heavy metal concentrations, their mobility was higher (TF > 1). The lowest mobility (TF < 1) was observed at site I (Poklek), where the concentration of heavy metals was higher, except for Fe. The opposite was shown for mobility of metals from stems to leaves (TF_leave/steam). The evaluation of CF showed that the area near the Ferronikeli smelter had low degree of Pb, moderate degree of Zn and considerable degree of Ni contamination. The values of RI indicate low potential ecological risk index.

Combining dissolved organic matter (DOM) in raw water (RW) with DOM in treated wastewater (TWW) can react with chlorine and pose emerging disinfection by-products (DBPs). This study evaluated DOM based on the molecular weight (MW) size fractionation, trihalomethane, iodinated-trihalomethane, haloacetonitrile, and trichloronitromethane formation potential (THMFP, I-THMFP, HANFP, and TCNMFP) of the RW from the U-Tapao Canal, Songkhla, Thailand and the RW mixed with TWW (RW + TWW) samples. The RW and RW + TWW were treated by coagulation with poly aluminum chloride. The DOM of RW and RW + TWW and their treated water was distributed most in the MW below 1 kDa. The MWs of 3-10 kDa and 1-3 kDa were the active DOM involved in the specific THMFP for the RW + TWW. The MW of < 1 kDa in the RW + TWW resulted in a slightly high specific I-THMFP and HANFP. The MW of 1 - 3 kDa in the coagulated samples had a high specific I-THMFP. The MW of > 10 kDa in the coagulated RW + TWW was a precursor for a particular HANFP. Monitoring systems for measuring the level of TWW mixed with RW and an effective process to enhance the efficiency of traditional water treatment must be set up to produce a consumer-safe water supply.

In this study, bare zero-valent iron nanoparticles (nZVI) have been modified using polyethylene glycol (PEG) of various molecular weight in a facile technique. The synthesized nZVI modified with PEG, M.W. of 600 and 6000 was denoted by nZVI-PEG₆₀₀ and nZVI-PEG₆₀₀₀, respectively, and compared their catalytic activity towards the reductive degradation of Congo red (CR) using NaBH₄.The existence of PEG layer surrounds the nZVI core was confirmed by several characterization tools, such as XRD, FTIR, FESEM and TEM. Herein, both nZVI-PEG₆₀₀ and nZVI-PEG₆₀₀₀ exhibited remarkable removal efficiencies of 89.6% and 99.2% within 14 min of reaction time. The optimum reaction parameters were found to be as follows: 0.2 g L^-1 catalyst dose and initial dye concentration of 2 × 10^-5 molL^-1 etc. Kinetic studies of dye degradation were investigated which follow pseudo-1^st-order kinetics. The TOC analysis confirmed the complete mineralization of CR dye by nZVI-PEG₆₀₀₀ nanocatalyst. GCMS analysis of plausible degraded products was performed to elucidate a probable mechanistic pathway of CR degradation. Further, we have investigated the degradation of two anionic dyes mixture, i.e., CR and methyl orange (MO) using best catalyst, i.e., nZVI-PEG₆₀₀₀.