Pub Date : 2023-06-30DOI: 10.3390/polysaccharides4030014
E. Mokhova, M. Gordienko, Natalia Menshutina, S. Kalenov, I. Avetissov, Artyom V. Eremeev
Freeze-drying is often used as a final stage to produce three-dimensional porous matrices for medicine. Because a pure solvent crystallizes first during freezing, it acts as a pore-forming agent. The size of the solvent crystals primarily depends on the cooling rate and the composition of the material to be frozen. Ultrasonic treatment also affects the size of crystals and can be used to control the structure of a porous matrix. This article describes the effect of ultrasound (40 kHz, 50 W) applied at the preliminary freezing stage of polysaccharide solutions (alginate, chitosan, alginate–chitosan and alginate–gelatin) on the finished matrix properties. The most attention was paid to the effect of ultrasound on the size and shape of crystals formed during freezing, which leads to a change in the porous structure of the matrices after solvent sublimation. As a result of changes in the microstructure, a number of differences in the vibrational spectra of the molecules and the values of pore volume, sorption capacity, permeability and degradation of matrices were identified. Such changes in the structure of materials, as well as the emerging directionality of pores, together can affect the process of cell cultivation in these polysaccharide matrices, which can be useful in solving problems of tissue engineering.
{"title":"Influence of Ultrasound on the Properties of Polysaccharide Complexes and Materials Based on Them","authors":"E. Mokhova, M. Gordienko, Natalia Menshutina, S. Kalenov, I. Avetissov, Artyom V. Eremeev","doi":"10.3390/polysaccharides4030014","DOIUrl":"https://doi.org/10.3390/polysaccharides4030014","url":null,"abstract":"Freeze-drying is often used as a final stage to produce three-dimensional porous matrices for medicine. Because a pure solvent crystallizes first during freezing, it acts as a pore-forming agent. The size of the solvent crystals primarily depends on the cooling rate and the composition of the material to be frozen. Ultrasonic treatment also affects the size of crystals and can be used to control the structure of a porous matrix. This article describes the effect of ultrasound (40 kHz, 50 W) applied at the preliminary freezing stage of polysaccharide solutions (alginate, chitosan, alginate–chitosan and alginate–gelatin) on the finished matrix properties. The most attention was paid to the effect of ultrasound on the size and shape of crystals formed during freezing, which leads to a change in the porous structure of the matrices after solvent sublimation. As a result of changes in the microstructure, a number of differences in the vibrational spectra of the molecules and the values of pore volume, sorption capacity, permeability and degradation of matrices were identified. Such changes in the structure of materials, as well as the emerging directionality of pores, together can affect the process of cell cultivation in these polysaccharide matrices, which can be useful in solving problems of tissue engineering.","PeriodicalId":18775,"journal":{"name":"Natural Polysaccharides in Drug Delivery and Biomedical Applications","volume":"51 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84439412","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-06-09DOI: 10.3390/polysaccharides4020013
R. B. Melati, D. C. Sass, J. Contiero, M. Brienzo
Xylan is a macromolecule of industrial interest that can be solubilized from lignocellulosic materials, such as sugarcane bagasse, which is a renewable source. However, the solubilization methods of xylan need to be better developed for use in industrial applications. The main objective of this study was to evaluate xylan solubilization methods with higher yields and purity by using biomasses/fractions of sugarcane: leaf and stem, internode, node, and external fraction. Two strategies were evaluated by applying diluted sodium chlorite, sodium sulfite, and hydrogen peroxide: a delignification of the biomass before xylan solubilization; and the delignification of the solubilized xylan for residual lignin removal. The delignification of the biomass before the xylan solubilization enabled to identify material and specific conditions for yields higher than 90%. Residual lignin varied from 3.14 to 18.06%, with hydrogen peroxide in alkaline medium partial delignification shown to be effective. The delignification of xylan presented better results using diluted hydrogen peroxide, with a reduction of 58.44% of the initial lignin content. The solubilized xylans were used as a substrate for xylanase activities, resulting in higher activity than commercial xylan. In the delignification of the biomasses, hydrogen peroxide was the reagent with better results concerning the yield, purity, and solubility of the xylan. This reagent (diluted) was also better in the delignification of the solubilized xylan, resulting in lower residual lignin content. The solubility and purity tests (low salt content) indicated that the solubilized xylan presented characteristics that were similar to or even better than commercial xylan.
{"title":"Xylan Solubilization from Partially Delignified Biomass, and Residual Lignin Removal from Solubilized Xylan","authors":"R. B. Melati, D. C. Sass, J. Contiero, M. Brienzo","doi":"10.3390/polysaccharides4020013","DOIUrl":"https://doi.org/10.3390/polysaccharides4020013","url":null,"abstract":"Xylan is a macromolecule of industrial interest that can be solubilized from lignocellulosic materials, such as sugarcane bagasse, which is a renewable source. However, the solubilization methods of xylan need to be better developed for use in industrial applications. The main objective of this study was to evaluate xylan solubilization methods with higher yields and purity by using biomasses/fractions of sugarcane: leaf and stem, internode, node, and external fraction. Two strategies were evaluated by applying diluted sodium chlorite, sodium sulfite, and hydrogen peroxide: a delignification of the biomass before xylan solubilization; and the delignification of the solubilized xylan for residual lignin removal. The delignification of the biomass before the xylan solubilization enabled to identify material and specific conditions for yields higher than 90%. Residual lignin varied from 3.14 to 18.06%, with hydrogen peroxide in alkaline medium partial delignification shown to be effective. The delignification of xylan presented better results using diluted hydrogen peroxide, with a reduction of 58.44% of the initial lignin content. The solubilized xylans were used as a substrate for xylanase activities, resulting in higher activity than commercial xylan. In the delignification of the biomasses, hydrogen peroxide was the reagent with better results concerning the yield, purity, and solubility of the xylan. This reagent (diluted) was also better in the delignification of the solubilized xylan, resulting in lower residual lignin content. The solubility and purity tests (low salt content) indicated that the solubilized xylan presented characteristics that were similar to or even better than commercial xylan.","PeriodicalId":18775,"journal":{"name":"Natural Polysaccharides in Drug Delivery and Biomedical Applications","volume":"123 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-06-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84123091","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-05-31DOI: 10.3390/polysaccharides4020012
Sudip Ghosh, M. Ghosh
The elevation of carbon dioxide (CO2) levels in the atmosphere is responsible for global warming which in turn causes abrupt climate change and consequently poses a threat to living organisms in the coming years. To reduce CO2 content in the atmosphere CO2 capture and separation is highly necessary. Among various methods of CO2 capture post-combustion capture is very much useful because of its operational simplicity and applicability in many industries and power sectors, such as coal-fired power plants. Polymers with high surface area, high volume and narrow pores are ideal solid sorbents for adsorption-driven post-combustion CO2 capture. Natural polymers, such as polysaccharides are cheap, abundant, and can be modified by various methods to produce porous materials and thus can be effectively utilized for CO2 capture while the surface area and the pore size of synthetic porous organic polymers can be tuned precisely for high CO2 capturing capacity. A significant amount of research activities has already been established in this field, especially in the last ten years and are still in progress. In this review, we have introduced the latest developments to the readers about synthetic techniques, post-synthetic modifications and CO2 capture capacities of various biopolymer-based materials and synthetic porous organic polymers (POPs) published in the last five years (2018–2022). This review will be beneficial to the researchers to design smart polymer-based materials to overcome the existing challenges in carbon capture and storage/sequestration.
{"title":"Post-Combustion Capture of Carbon Dioxide by Natural and Synthetic Organic Polymers","authors":"Sudip Ghosh, M. Ghosh","doi":"10.3390/polysaccharides4020012","DOIUrl":"https://doi.org/10.3390/polysaccharides4020012","url":null,"abstract":"The elevation of carbon dioxide (CO2) levels in the atmosphere is responsible for global warming which in turn causes abrupt climate change and consequently poses a threat to living organisms in the coming years. To reduce CO2 content in the atmosphere CO2 capture and separation is highly necessary. Among various methods of CO2 capture post-combustion capture is very much useful because of its operational simplicity and applicability in many industries and power sectors, such as coal-fired power plants. Polymers with high surface area, high volume and narrow pores are ideal solid sorbents for adsorption-driven post-combustion CO2 capture. Natural polymers, such as polysaccharides are cheap, abundant, and can be modified by various methods to produce porous materials and thus can be effectively utilized for CO2 capture while the surface area and the pore size of synthetic porous organic polymers can be tuned precisely for high CO2 capturing capacity. A significant amount of research activities has already been established in this field, especially in the last ten years and are still in progress. In this review, we have introduced the latest developments to the readers about synthetic techniques, post-synthetic modifications and CO2 capture capacities of various biopolymer-based materials and synthetic porous organic polymers (POPs) published in the last five years (2018–2022). This review will be beneficial to the researchers to design smart polymer-based materials to overcome the existing challenges in carbon capture and storage/sequestration.","PeriodicalId":18775,"journal":{"name":"Natural Polysaccharides in Drug Delivery and Biomedical Applications","volume":"59 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-05-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81340373","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-05-15DOI: 10.3390/polysaccharides4020011
M. Konovalova, E. Kashirina, Kseniya Beltsova, O. Kotsareva, G. Fattakhova, E. Svirshchevskaya
IgE-mediated allergic reaction occurs in response to harmless environmental compounds, such as tree and grass pollen, fragments of household microorganisms, etc. To date, the only way to treat IgE-mediated allergy is allergen-specific immunotherapy (ASIT), which consists of a prolonged subcutaneous administration of allergen extracts or recombinant proteins. The long duration of the treatment, the cost and the risk of life-threatening adverse reactions are the main limiting factors for ASIT. The aim of this work was to develop allergen proteins encapsulated in chitosan-based microparticles that can be safely administered at high doses and in a rash protocol. The egg white allergen, Gal d 1 protein, was used as a model antigen. The protein was packed into core–shell type microparticles (MPs), in which the core was formed with succinyl chitosan conjugated to Gal d 1, subsequently coated with a shell formed by quaternized chitosan. The obtained core–shell MPs containing Gal d 1 in the core (Gal-MPs) were non-toxic to macrophage and fibroblast cell lines. At the same time, Gal-MPs were quickly engulfed by bone marrow-derived dendritic cells or RAW264.7 macrophage cells, as was visualized using flow cytometry and confocal microscopy. Encapsulated Gal d 1 was not recognized by Gal d 1-specific IgE in ELISA. Female BALB/c mice were immunized with Gal-MPs subcutaneously three times a week for 2 weeks. Immunization of mice resulted in IgG titers 1250 ± 200 without IgE production. Allergy in control and vaccinated mice was induced by low-dose Gal d 1 injections in the withers of mice. IgE was induced in control-sensitized but not in the vaccinated mice. Thus, preventive vaccination with the encapsulated allergens is safe and rapid; it significantly reduces the risk of IgE production induced by respiratory and oral allergens.
ige介导的过敏反应发生在对无害的环境化合物的反应中，如树木和草的花粉，家庭微生物的碎片等。迄今为止，治疗ige介导的过敏的唯一方法是过敏原特异性免疫疗法(ASIT)，它包括长时间皮下给药过敏原提取物或重组蛋白。治疗时间长、费用高和危及生命的不良反应风险是ASIT的主要限制因素。这项工作的目的是开发包被壳聚糖微颗粒的过敏原蛋白，这种微颗粒可以在高剂量和皮疹方案下安全使用。以蛋清过敏原gald1蛋白作为模型抗原。该蛋白被包裹成核-壳型微粒子(MPs)，其核是由琥珀酰壳聚糖偶联Gal d1形成的，壳层是由季铵化壳聚糖形成的。获得的核心中含有Gal d1的核壳MPs (Gal-MPs)对巨噬细胞和成纤维细胞系无毒。同时，通过流式细胞术和共聚焦显微镜观察，Gal-MPs被骨髓源性树突状细胞或RAW264.7巨噬细胞迅速吞噬。经酶联免疫吸附试验，包封的Gal d1不被Gal d1特异性IgE识别。用Gal-MPs皮下免疫BALB/c雌性小鼠，每周3次，持续2周。小鼠免疫后IgG滴度为1250±200，不产生IgE。用低剂量的Gal d 1在小鼠的肩部注射，引起对照组和接种组小鼠的过敏反应。IgE在对照组致敏的小鼠中被诱导，而在接种疫苗的小鼠中没有。因此，用包封的过敏原进行预防性接种是安全、快速的;它可以显著降低呼吸道和口腔过敏原诱导的IgE产生的风险。
{"title":"Encapsulation of Allergens into Core–Shell Chitosan Microparticles for Allergen-Specific Subcutaneous Immunotherapy","authors":"M. Konovalova, E. Kashirina, Kseniya Beltsova, O. Kotsareva, G. Fattakhova, E. Svirshchevskaya","doi":"10.3390/polysaccharides4020011","DOIUrl":"https://doi.org/10.3390/polysaccharides4020011","url":null,"abstract":"IgE-mediated allergic reaction occurs in response to harmless environmental compounds, such as tree and grass pollen, fragments of household microorganisms, etc. To date, the only way to treat IgE-mediated allergy is allergen-specific immunotherapy (ASIT), which consists of a prolonged subcutaneous administration of allergen extracts or recombinant proteins. The long duration of the treatment, the cost and the risk of life-threatening adverse reactions are the main limiting factors for ASIT. The aim of this work was to develop allergen proteins encapsulated in chitosan-based microparticles that can be safely administered at high doses and in a rash protocol. The egg white allergen, Gal d 1 protein, was used as a model antigen. The protein was packed into core–shell type microparticles (MPs), in which the core was formed with succinyl chitosan conjugated to Gal d 1, subsequently coated with a shell formed by quaternized chitosan. The obtained core–shell MPs containing Gal d 1 in the core (Gal-MPs) were non-toxic to macrophage and fibroblast cell lines. At the same time, Gal-MPs were quickly engulfed by bone marrow-derived dendritic cells or RAW264.7 macrophage cells, as was visualized using flow cytometry and confocal microscopy. Encapsulated Gal d 1 was not recognized by Gal d 1-specific IgE in ELISA. Female BALB/c mice were immunized with Gal-MPs subcutaneously three times a week for 2 weeks. Immunization of mice resulted in IgG titers 1250 ± 200 without IgE production. Allergy in control and vaccinated mice was induced by low-dose Gal d 1 injections in the withers of mice. IgE was induced in control-sensitized but not in the vaccinated mice. Thus, preventive vaccination with the encapsulated allergens is safe and rapid; it significantly reduces the risk of IgE production induced by respiratory and oral allergens.","PeriodicalId":18775,"journal":{"name":"Natural Polysaccharides in Drug Delivery and Biomedical Applications","volume":"11 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-05-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81973810","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-04-16DOI: 10.3390/polysaccharides4020010
Akanksha T. Soni, James E. Rookes, Sagar S. Arya
Nanoparticle-based seed priming has opened new avenues in crop science due to their plant growth promoting potential. Similarly, biopolymers such as chitosan (CS) are widely studied as seed priming agents due to the biodegradable and biocompatible nature, ability to enhance germination percentage and overall seedling health. Therefore, priming with chitosan nanoparticles (CNPs) is a promising tool to enhance overall plant health. Here, we studied the effect of nanopriming with CNPs or CS (50 µg/mL) on morphological, physiological, and biochemical parameters of rice seedlings, grown in salinity stress conditions NaCl (0–250 mM). CNPs were synthesized using an ionic gelation method and characterized by scanning electron microscopy (50–100 nm), zeta potential analyser (Particle size distribution–373.5 ± 3.7 nm; polydispersity index- > 0.4; zeta potential–45.3 ± 2.5 mV) and profilometry (300–1500 nm hydrodynamic height). Morphological, physiological, and biochemical responses of rice seedlings grown from seeds primed with either CNPs or CS showed a positive effect on germination, seedling vigour, biochemical and antioxidant responses. Seeds primed with CNPs and CS demonstrated significantly higher germination potential and seedling vigour compared to control hydro-primed seeds when grown under increasing NaCl concentrations. These outcomes highlight that CNPs and CS can be used as potential seed priming agents to alleviate salinity stress in rice seedlings. However, further studies are warranted to understand the effect of CNPs and CS seed priming on the overall growth and development of rice plants as well as rice yield.
{"title":"Chitosan Nanoparticles as Seed Priming Agents to Alleviate Salinity Stress in Rice (Oryza sativa L.) Seedlings","authors":"Akanksha T. Soni, James E. Rookes, Sagar S. Arya","doi":"10.3390/polysaccharides4020010","DOIUrl":"https://doi.org/10.3390/polysaccharides4020010","url":null,"abstract":"Nanoparticle-based seed priming has opened new avenues in crop science due to their plant growth promoting potential. Similarly, biopolymers such as chitosan (CS) are widely studied as seed priming agents due to the biodegradable and biocompatible nature, ability to enhance germination percentage and overall seedling health. Therefore, priming with chitosan nanoparticles (CNPs) is a promising tool to enhance overall plant health. Here, we studied the effect of nanopriming with CNPs or CS (50 µg/mL) on morphological, physiological, and biochemical parameters of rice seedlings, grown in salinity stress conditions NaCl (0–250 mM). CNPs were synthesized using an ionic gelation method and characterized by scanning electron microscopy (50–100 nm), zeta potential analyser (Particle size distribution–373.5 ± 3.7 nm; polydispersity index- > 0.4; zeta potential–45.3 ± 2.5 mV) and profilometry (300–1500 nm hydrodynamic height). Morphological, physiological, and biochemical responses of rice seedlings grown from seeds primed with either CNPs or CS showed a positive effect on germination, seedling vigour, biochemical and antioxidant responses. Seeds primed with CNPs and CS demonstrated significantly higher germination potential and seedling vigour compared to control hydro-primed seeds when grown under increasing NaCl concentrations. These outcomes highlight that CNPs and CS can be used as potential seed priming agents to alleviate salinity stress in rice seedlings. However, further studies are warranted to understand the effect of CNPs and CS seed priming on the overall growth and development of rice plants as well as rice yield.","PeriodicalId":18775,"journal":{"name":"Natural Polysaccharides in Drug Delivery and Biomedical Applications","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-04-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90937673","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-04-12DOI: 10.3390/polysaccharides4020009
C. Kipkoech
The consumption of insects as an alternative protein source is acceptable as a sustainable alternative to mainstream protein sources. Apart from containing a high protein content, insects also have dietary fiber in the form of chitin, which helps to enrich gut microbiota. The importance of the gut microbiome in general health has recently been underlined for humans, farm animals, pets, poultry, and fish. The advances in 16S RNA techniques have enabled the examination of complex microbial communities in the gastrointestinal tract, shedding more light on the role of diet in disease and immunity. The gut microbiome generates signals influencing the normal nutritional status, immune functions, metabolism, disease, and well-being. The gut microbiome depends on dietary fiber; hence, their diversity is modulated by diet, a relevant factor in defining the composition of gut microbiota. Small shifts in diet have demonstrated an enormous shift in gut microbiota. Edible insects are an excellent source of protein, fat, and chitin that could influence the gut microbiota as a prebiotic. Chitin from insects, when consumed, contributes to a healthy gut microbiome by increasing diversity in fecal microbiota. Moreover, a high fiber intake has been associated with a reduced risk of breast cancer, diverticular disease, coronary heart disease, and metabolic syndrome. This review presents edible insects with a focus on fiber found in the insect as a beneficial food component.
{"title":"Beyond Proteins—Edible Insects as a Source of Dietary Fiber","authors":"C. Kipkoech","doi":"10.3390/polysaccharides4020009","DOIUrl":"https://doi.org/10.3390/polysaccharides4020009","url":null,"abstract":"The consumption of insects as an alternative protein source is acceptable as a sustainable alternative to mainstream protein sources. Apart from containing a high protein content, insects also have dietary fiber in the form of chitin, which helps to enrich gut microbiota. The importance of the gut microbiome in general health has recently been underlined for humans, farm animals, pets, poultry, and fish. The advances in 16S RNA techniques have enabled the examination of complex microbial communities in the gastrointestinal tract, shedding more light on the role of diet in disease and immunity. The gut microbiome generates signals influencing the normal nutritional status, immune functions, metabolism, disease, and well-being. The gut microbiome depends on dietary fiber; hence, their diversity is modulated by diet, a relevant factor in defining the composition of gut microbiota. Small shifts in diet have demonstrated an enormous shift in gut microbiota. Edible insects are an excellent source of protein, fat, and chitin that could influence the gut microbiota as a prebiotic. Chitin from insects, when consumed, contributes to a healthy gut microbiome by increasing diversity in fecal microbiota. Moreover, a high fiber intake has been associated with a reduced risk of breast cancer, diverticular disease, coronary heart disease, and metabolic syndrome. This review presents edible insects with a focus on fiber found in the insect as a beneficial food component.","PeriodicalId":18775,"journal":{"name":"Natural Polysaccharides in Drug Delivery and Biomedical Applications","volume":"542 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-04-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78558695","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-03-27DOI: 10.3390/polysaccharides4020008
R. Cruz-Monterrosa, A. Rayas-Amor, R. González-Reza, M. Zambrano-Zaragoza, J. E. Aguilar-Toalá, A. Liceaga
Most foods derived from plant origin are very nutritious but highly perishable products. Nowadays, the food industry is focusing on the development of efficient preservation strategies as viable alternatives to traditional packaging and chemical treatments. Hence, polysaccharide-based edible coatings have been proposed because of their properties of controlled release of food additives and the protection of sensitive compounds in coated foods. Thus, this technology has allowed for improving the quality parameters and extends the shelf life of fruits and vegetables through positive effects on enzyme activities, physicochemical characteristics (e.g., color, pH, firmness, weight, soluble solids), microbial load, and nutritional and sensory properties of coated foods. Additionally, some bioactive compounds have been incorporated into polysaccharide-based edible coatings, showing remarkable antioxidant and antimicrobial properties. Thus, polysaccharide-based edible coatings incorporated with bioactive compounds can be used not only as an efficient preservation strategy but also may play a vital role in human health when consumed with the food. The main objective of this review is to provide a comprehensive overview of materials commonly used in the preparation of polysaccharide-based edible coatings, including the main bioactive compounds that can be incorporated into edible coatings, which have shown specific bioactivities.
{"title":"Application of Polysaccharide-Based Edible Coatings on Fruits and Vegetables: Improvement of Food Quality and Bioactivities","authors":"R. Cruz-Monterrosa, A. Rayas-Amor, R. González-Reza, M. Zambrano-Zaragoza, J. E. Aguilar-Toalá, A. Liceaga","doi":"10.3390/polysaccharides4020008","DOIUrl":"https://doi.org/10.3390/polysaccharides4020008","url":null,"abstract":"Most foods derived from plant origin are very nutritious but highly perishable products. Nowadays, the food industry is focusing on the development of efficient preservation strategies as viable alternatives to traditional packaging and chemical treatments. Hence, polysaccharide-based edible coatings have been proposed because of their properties of controlled release of food additives and the protection of sensitive compounds in coated foods. Thus, this technology has allowed for improving the quality parameters and extends the shelf life of fruits and vegetables through positive effects on enzyme activities, physicochemical characteristics (e.g., color, pH, firmness, weight, soluble solids), microbial load, and nutritional and sensory properties of coated foods. Additionally, some bioactive compounds have been incorporated into polysaccharide-based edible coatings, showing remarkable antioxidant and antimicrobial properties. Thus, polysaccharide-based edible coatings incorporated with bioactive compounds can be used not only as an efficient preservation strategy but also may play a vital role in human health when consumed with the food. The main objective of this review is to provide a comprehensive overview of materials commonly used in the preparation of polysaccharide-based edible coatings, including the main bioactive compounds that can be incorporated into edible coatings, which have shown specific bioactivities.","PeriodicalId":18775,"journal":{"name":"Natural Polysaccharides in Drug Delivery and Biomedical Applications","volume":"63 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-03-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86707629","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-03-23DOI: 10.3390/polysaccharides4020007
Aleksandra M Kozlowski, Vlad Dinu, Thomas E MacCalman, Alan M. Smith, J. Roubroeks, E. Yates, S. Harding, G. Morris
This work evaluated the hydrodynamic properties of heparin hydrolysed at temperatures ranging from 40 °C to 80 °C in buffered acid and alkaline environments. The correlation between hydrodynamic parameters led to the conclusion that polymer conformational changes appeared to be minimal until chain depolymerisation, initiated at pH 1 and 80 °C. However, the synergy of conformational changes, even if minimal, and sulphate loss observed at pH 1, pH 3 and pH 12 (various temperatures) resulted in a loss of the antifactor Xa activity. Therefore, the ‘contribution’ of conformational changes should be added to the generally recognized effect of desulphation towards the activity of heparin. This is of significance as the processing of medical heparin is complex, and requires adjustment of several physical and chemical factors, including pH and temperature.
{"title":"Heparin in Acid and Alkaline Environments—A Study of the Correlations between Hydrodynamic Properties and Desulphation","authors":"Aleksandra M Kozlowski, Vlad Dinu, Thomas E MacCalman, Alan M. Smith, J. Roubroeks, E. Yates, S. Harding, G. Morris","doi":"10.3390/polysaccharides4020007","DOIUrl":"https://doi.org/10.3390/polysaccharides4020007","url":null,"abstract":"This work evaluated the hydrodynamic properties of heparin hydrolysed at temperatures ranging from 40 °C to 80 °C in buffered acid and alkaline environments. The correlation between hydrodynamic parameters led to the conclusion that polymer conformational changes appeared to be minimal until chain depolymerisation, initiated at pH 1 and 80 °C. However, the synergy of conformational changes, even if minimal, and sulphate loss observed at pH 1, pH 3 and pH 12 (various temperatures) resulted in a loss of the antifactor Xa activity. Therefore, the ‘contribution’ of conformational changes should be added to the generally recognized effect of desulphation towards the activity of heparin. This is of significance as the processing of medical heparin is complex, and requires adjustment of several physical and chemical factors, including pH and temperature.","PeriodicalId":18775,"journal":{"name":"Natural Polysaccharides in Drug Delivery and Biomedical Applications","volume":"35 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79871469","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-02-25DOI: 10.3390/polysaccharides4010006
E. Ozhimkova, I. Uschapovsky, O. Manaenkov
Flaxseed mucilage and its derivatives have been extensively investigated over the last decade, mainly due to their inherent techno-functional (thickening, gelling, interface-stabilizing, and film-forming) properties that are relevant in the food industry. Hydrocolloids are used to modify food properties, such as for stabilization and emulsion, and are also used to control the microstructure of the food. Increasing research attention has been paid to the application of hydrocolloid materials in gel particles for encapsulation or texture control in food, pharmaceutical, cosmetic, and probiotic products. Thus, it is important to investigate the properties of hydrocolloids manufactured from various sources and explore their possible applications in the food industry. The applied nature of the study of plant mucus substances is associated with the ever-increasing demand for their use in the food, cosmetic, and pharmacological industries, determining the related research priorities, including the development of the most effective methods for the extraction of glycans and the search for highly productive raw materials for the production of polysaccharides. The aim of this work was to study varietal differences in the compositions of heteropolysaccharides in the mucus samples of oilseed and fiber flax varieties using a modern methodological approach for obtaining glycans based on the ultrasonic extraction of polysaccharides. The seeds of 10 flax varieties were studied, differing in their morphotype, place, and time of creation. The obtained results indicated significant differences in the quantitative and qualitative compositions of the heteropolysaccharides of flax seeds of various varieties. The contents of reducing sugars in the studied varieties ranged from 5.61 ± 0.01 to 18.81 ± 0.01 mg/g, indicating significant differences in the structural organization of glycans in different flax varieties. Additionally, the results obtained here allowed us to conclude that the range of reducing sugars for flax heteropolysaccharides is significantly less than this range for oilseed flax varieties. The obtained results of the study of the composition of flax seed heteropolysaccharides allowed us to consider them as selection trait and genetic markers.
{"title":"Study of Varietal Differences in the Composition of Heteropolysaccharides of Oil Flax and Fiber Flax","authors":"E. Ozhimkova, I. Uschapovsky, O. Manaenkov","doi":"10.3390/polysaccharides4010006","DOIUrl":"https://doi.org/10.3390/polysaccharides4010006","url":null,"abstract":"Flaxseed mucilage and its derivatives have been extensively investigated over the last decade, mainly due to their inherent techno-functional (thickening, gelling, interface-stabilizing, and film-forming) properties that are relevant in the food industry. Hydrocolloids are used to modify food properties, such as for stabilization and emulsion, and are also used to control the microstructure of the food. Increasing research attention has been paid to the application of hydrocolloid materials in gel particles for encapsulation or texture control in food, pharmaceutical, cosmetic, and probiotic products. Thus, it is important to investigate the properties of hydrocolloids manufactured from various sources and explore their possible applications in the food industry. The applied nature of the study of plant mucus substances is associated with the ever-increasing demand for their use in the food, cosmetic, and pharmacological industries, determining the related research priorities, including the development of the most effective methods for the extraction of glycans and the search for highly productive raw materials for the production of polysaccharides. The aim of this work was to study varietal differences in the compositions of heteropolysaccharides in the mucus samples of oilseed and fiber flax varieties using a modern methodological approach for obtaining glycans based on the ultrasonic extraction of polysaccharides. The seeds of 10 flax varieties were studied, differing in their morphotype, place, and time of creation. The obtained results indicated significant differences in the quantitative and qualitative compositions of the heteropolysaccharides of flax seeds of various varieties. The contents of reducing sugars in the studied varieties ranged from 5.61 ± 0.01 to 18.81 ± 0.01 mg/g, indicating significant differences in the structural organization of glycans in different flax varieties. Additionally, the results obtained here allowed us to conclude that the range of reducing sugars for flax heteropolysaccharides is significantly less than this range for oilseed flax varieties. The obtained results of the study of the composition of flax seed heteropolysaccharides allowed us to consider them as selection trait and genetic markers.","PeriodicalId":18775,"journal":{"name":"Natural Polysaccharides in Drug Delivery and Biomedical Applications","volume":"18 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-02-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83054562","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-02-18DOI: 10.3390/polysaccharides4010005
J. F. Delgado, A. G. Salvay, S. Arroyo, C. Bernal, M. Foresti
Innovative and sustainable all-cellulose composites (ACCs) can be obtained by partial dissolution of cellulosic fibers and regeneration of the dissolved fraction. Among cellulose solvents, sodium hydroxide/urea solutions are recognized as promising low-environmental impact systems. In this work, filter paper (FP) was dissolved with a 7 wt% NaOH/12 wt% urea aqueous solution, kept at −18 °C for different time intervals, regenerated with distilled water and finally dried under different conditions. The developed films were characterized in terms of morphology, porosity, optical properties, crystalline structure, hydration and mechanical properties. The porosity of the composites decreased with dissolution time due to the progressive filling of voids as the cellulosic fibers’ surface skin layer was dissolved and regenerated. Samples treated for 4 h showed the minimum values of porosity and opacity, high hydration and a substantial change from cellulose I to cellulose II. Hot pressing during drying led to relevant improvements in ACCs stiffness and strength values.
{"title":"Effect of Dissolution Time on the Development of All-Cellulose Composites Using the NaOH/Urea Solvent System","authors":"J. F. Delgado, A. G. Salvay, S. Arroyo, C. Bernal, M. Foresti","doi":"10.3390/polysaccharides4010005","DOIUrl":"https://doi.org/10.3390/polysaccharides4010005","url":null,"abstract":"Innovative and sustainable all-cellulose composites (ACCs) can be obtained by partial dissolution of cellulosic fibers and regeneration of the dissolved fraction. Among cellulose solvents, sodium hydroxide/urea solutions are recognized as promising low-environmental impact systems. In this work, filter paper (FP) was dissolved with a 7 wt% NaOH/12 wt% urea aqueous solution, kept at −18 °C for different time intervals, regenerated with distilled water and finally dried under different conditions. The developed films were characterized in terms of morphology, porosity, optical properties, crystalline structure, hydration and mechanical properties. The porosity of the composites decreased with dissolution time due to the progressive filling of voids as the cellulosic fibers’ surface skin layer was dissolved and regenerated. Samples treated for 4 h showed the minimum values of porosity and opacity, high hydration and a substantial change from cellulose I to cellulose II. Hot pressing during drying led to relevant improvements in ACCs stiffness and strength values.","PeriodicalId":18775,"journal":{"name":"Natural Polysaccharides in Drug Delivery and Biomedical Applications","volume":"9 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-02-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90794454","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：