首页 > 最新文献

2012 International Conference on Computer Science and Information Processing (CSIP)最新文献

英文 中文
Camera design in ultra-low temperature vessel 超低温容器摄像机设计
Wu Li, Cao Jian-zhong, Yan A-qi, Wu Deng-shan, Zhang Zhao-hui, Zhang Hai-feng, Zhu Qing, Dong Sen, Zhang Jian
According to special application, surveillance camera working in the ultra-low temperature and high pressure vessel is designed. By request of optics and electronics system on temperature, research focus on the design from selection of the structure material, thermal insulation, the adaptability of optical system in the ultra-low temperature and high pressure environment. Finally, It is confirmed that opto-Mechanical structure with double layers thermal insulation of PIPA and ITO optical window have benefit on thermal insulation for the camera working in this ultra-low temperature(-196°C) and high pressure(0.5MPa) environment. All the opto-Mechanical material which may be contact with ultra-low high pressure liquid can also be consistent with liquid.
根据特殊应用,设计了工作在超低温高压容器中的监控摄像机。根据光学和电子系统对温度的要求,从结构材料的选择、隔热性能、光学系统在超低温高压环境下的适应性等方面进行了设计研究。最后,在超低温(-196°C)高压(0.5MPa)环境下,采用PIPA和ITO光学窗双层隔热的光机械结构对摄像机的隔热有一定的好处。所有可能与超低高压液体接触的光机械材料也可与液体保持一致。
{"title":"Camera design in ultra-low temperature vessel","authors":"Wu Li, Cao Jian-zhong, Yan A-qi, Wu Deng-shan, Zhang Zhao-hui, Zhang Hai-feng, Zhu Qing, Dong Sen, Zhang Jian","doi":"10.1109/CSIP.2012.6308868","DOIUrl":"https://doi.org/10.1109/CSIP.2012.6308868","url":null,"abstract":"According to special application, surveillance camera working in the ultra-low temperature and high pressure vessel is designed. By request of optics and electronics system on temperature, research focus on the design from selection of the structure material, thermal insulation, the adaptability of optical system in the ultra-low temperature and high pressure environment. Finally, It is confirmed that opto-Mechanical structure with double layers thermal insulation of PIPA and ITO optical window have benefit on thermal insulation for the camera working in this ultra-low temperature(-196°C) and high pressure(0.5MPa) environment. All the opto-Mechanical material which may be contact with ultra-low high pressure liquid can also be consistent with liquid.","PeriodicalId":193335,"journal":{"name":"2012 International Conference on Computer Science and Information Processing (CSIP)","volume":"05 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130789243","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Development of Interchangeable Virtual Instrument driver for Cannon-Chamber Test Instrument 炮室试验仪器可互换虚拟仪器驱动程序的开发
Jia Huiqin, Shi Jian-wen
The driver development is important for the program-controlled instruments. The purpose of this paper is to introduce how to develop the drivers, which can realize the aim of interchangeability the same type of instrumentation without replacing the drivers, so the application layer can call it conveniently. The drivers are developed under the Interchangeable Virtual Instrument standards, which is IVI-COM, which describe a flexible architecture for developing the interchangeable instrument drivers. But the interface realization specification between the interchangeable virtual instrument driver and upper test program is not given. Aiming at this problem, using Component Object Model to develop this interface is presented on this paper. At the same time, the software is classified as application layer, instrument driven layer and Input/output layer. Finally the programming method under Visual Basic environment is given. The application program about the Cannon-Chamber Test Instrument is easy to maintain and update because layered architecture and COM components is used.
驱动程序的开发是程序控制仪器的重要组成部分。本文的目的是介绍如何开发驱动程序,在不更换驱动程序的情况下实现同类型仪器互换性的目的,使应用层可以方便地调用它。这些驱动程序是在可互换虚拟仪器标准IVI-COM下开发的,该标准描述了一个灵活的可互换仪器驱动程序开发体系结构。但没有给出可互换虚拟仪器驱动程序与上位测试程序之间的接口实现规范。针对这一问题,本文提出了使用组件对象模型开发该接口的方法。同时将软件分为应用层、仪器驱动层和输入/输出层。最后给出了在Visual Basic环境下的编程方法。该系统采用了分层结构和COM组件,使应用程序易于维护和更新。
{"title":"Development of Interchangeable Virtual Instrument driver for Cannon-Chamber Test Instrument","authors":"Jia Huiqin, Shi Jian-wen","doi":"10.1109/CSIP.2012.6308853","DOIUrl":"https://doi.org/10.1109/CSIP.2012.6308853","url":null,"abstract":"The driver development is important for the program-controlled instruments. The purpose of this paper is to introduce how to develop the drivers, which can realize the aim of interchangeability the same type of instrumentation without replacing the drivers, so the application layer can call it conveniently. The drivers are developed under the Interchangeable Virtual Instrument standards, which is IVI-COM, which describe a flexible architecture for developing the interchangeable instrument drivers. But the interface realization specification between the interchangeable virtual instrument driver and upper test program is not given. Aiming at this problem, using Component Object Model to develop this interface is presented on this paper. At the same time, the software is classified as application layer, instrument driven layer and Input/output layer. Finally the programming method under Visual Basic environment is given. The application program about the Cannon-Chamber Test Instrument is easy to maintain and update because layered architecture and COM components is used.","PeriodicalId":193335,"journal":{"name":"2012 International Conference on Computer Science and Information Processing (CSIP)","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132903722","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Study of pneumatic glass-wall cleaning robots 气动玻璃壁清扫机器人的研究
Jiujun Zhen, Zhonghua Zhao
Through the analysis of glass-wall cleaning robots research status at home and abroad, based on cleaning characteristics and requirements of such kind of smooth surface, a kind of pneumatic glass-wall cleaning robot is presented here. The robot which adopts unique three-position cylinder driving technique and embedded control system can crawl along the glass-wall and clean, and can overcome obstacles in a certain height. Running results show that the robot system has simple structure, low cost, the functions of on-line fault diagnosis, and can provide a new efficient, simple and safe way for the glass-wall cleaning.
通过对玻璃幕墙清扫机器人国内外研究现状的分析,基于对此类光滑表面的清洗特点和要求,提出了一种气动玻璃幕墙清扫机器人。该机器人采用独特的三位置气缸驱动技术和嵌入式控制系统,可以沿玻璃墙爬行和清洁,并可以克服一定高度的障碍物。运行结果表明,该机器人系统结构简单、成本低、具有在线故障诊断功能,为玻璃幕墙清洗提供了一种高效、简单、安全的新方法。
{"title":"Study of pneumatic glass-wall cleaning robots","authors":"Jiujun Zhen, Zhonghua Zhao","doi":"10.1109/CSIP.2012.6309087","DOIUrl":"https://doi.org/10.1109/CSIP.2012.6309087","url":null,"abstract":"Through the analysis of glass-wall cleaning robots research status at home and abroad, based on cleaning characteristics and requirements of such kind of smooth surface, a kind of pneumatic glass-wall cleaning robot is presented here. The robot which adopts unique three-position cylinder driving technique and embedded control system can crawl along the glass-wall and clean, and can overcome obstacles in a certain height. Running results show that the robot system has simple structure, low cost, the functions of on-line fault diagnosis, and can provide a new efficient, simple and safe way for the glass-wall cleaning.","PeriodicalId":193335,"journal":{"name":"2012 International Conference on Computer Science and Information Processing (CSIP)","volume":"358 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130503624","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Multiband conformal fin-shaped antenna with parasitic element for vehicle application 车用带寄生元件的多波段共形鳍形天线
Shengcai Jiao, Hong Yang, Bo Liang, Zhijun Zhang
A multiband conformal fin-shaped antenna with parasitic element for vehicle communication devices is presented. The proposed antenna is small, fin-shaped for vehicle communication application. This structure includes a irregular-shaped microstripe with parasitic element on fin-shaped ABS metrical, generating multi-bands of about 350, 800, 1800 and 2400MHz. The obtained bandwidth covers UHF, CDMA, GSM, DCS1800, PCS1900 and WIFI bands. Details of proposed antenna design and experimental results are presented and discuss.
提出了一种用于车载通信设备的带寄生元件的多波段共形鳍形天线。该天线体积小,呈鳍状,适用于车载通信。该结构包括一个不规则形状的微条纹,寄生元件在鳍形ABS测量上,产生约350、800、1800和2400MHz的多频段。获得的带宽覆盖UHF、CDMA、GSM、DCS1800、PCS1900和WIFI频段。提出并讨论了天线设计的细节和实验结果。
{"title":"Multiband conformal fin-shaped antenna with parasitic element for vehicle application","authors":"Shengcai Jiao, Hong Yang, Bo Liang, Zhijun Zhang","doi":"10.1109/CSIP.2012.6309051","DOIUrl":"https://doi.org/10.1109/CSIP.2012.6309051","url":null,"abstract":"A multiband conformal fin-shaped antenna with parasitic element for vehicle communication devices is presented. The proposed antenna is small, fin-shaped for vehicle communication application. This structure includes a irregular-shaped microstripe with parasitic element on fin-shaped ABS metrical, generating multi-bands of about 350, 800, 1800 and 2400MHz. The obtained bandwidth covers UHF, CDMA, GSM, DCS1800, PCS1900 and WIFI bands. Details of proposed antenna design and experimental results are presented and discuss.","PeriodicalId":193335,"journal":{"name":"2012 International Conference on Computer Science and Information Processing (CSIP)","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130504828","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
A cookbook generator of Java code based on Open Document Format 一个基于开放文档格式的Java代码食谱生成器
Zhang Gang, Yang Lulu
This paper provides information about generating HTML files and an ODF (Open Document Format) format document as well from Java source code combined with comments in HTML format, and illustrates the building configuration of the expected cookbook and written rules of corresponding Java code and comments in details, so as to give an instruction on how to use ODF Toolkit and Simple API to create your own application through the example of customizing and achieving the Simple API cookbook.
本文介绍了如何从Java源代码结合HTML格式的注释生成HTML文件和ODF (Open Document Format)格式的文档,并详细说明了期望的cookbook的构建配置以及相应的Java代码和注释的编写规则,从而通过定制和实现Simple API cookbook的示例来指导如何使用ODF Toolkit和Simple API创建自己的应用程序。
{"title":"A cookbook generator of Java code based on Open Document Format","authors":"Zhang Gang, Yang Lulu","doi":"10.1109/CSIP.2012.6309024","DOIUrl":"https://doi.org/10.1109/CSIP.2012.6309024","url":null,"abstract":"This paper provides information about generating HTML files and an ODF (Open Document Format) format document as well from Java source code combined with comments in HTML format, and illustrates the building configuration of the expected cookbook and written rules of corresponding Java code and comments in details, so as to give an instruction on how to use ODF Toolkit and Simple API to create your own application through the example of customizing and achieving the Simple API cookbook.","PeriodicalId":193335,"journal":{"name":"2012 International Conference on Computer Science and Information Processing (CSIP)","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125513939","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Freeway Multi-ramp Intelligent Control Based on Fuzzy Neural Network 基于模糊神经网络的高速公路多匝道智能控制
Binghua Wu, Aizeng Li, Hui Li
Based on the theory of fuzzy neural network and hierarchical intelligent control, establish system architecture of freeway multi-ramp control, put forward coordination control algorithm of multi-ramp, provide a systemic solution method to realize multi-ramp intelligent control. This method is relatively simple and easy to expand, simultaneity independent on specific freeway mathematical models, possess well adaptability. Moreover use the Matlab software carry through simulation, simulation result show that the algorithm is feasible and effective.
基于模糊神经网络和分层智能控制理论,建立了高速公路多匝道控制系统架构,提出了多匝道协调控制算法,为实现多匝道智能控制提供了一种系统的解决方法。该方法相对简单,易于扩展,同时性不依赖于特定的高速公路数学模型,具有较好的适应性。并利用Matlab软件进行仿真,仿真结果表明该算法是可行和有效的。
{"title":"Freeway Multi-ramp Intelligent Control Based on Fuzzy Neural Network","authors":"Binghua Wu, Aizeng Li, Hui Li","doi":"10.1109/CSIP.2012.6308796","DOIUrl":"https://doi.org/10.1109/CSIP.2012.6308796","url":null,"abstract":"Based on the theory of fuzzy neural network and hierarchical intelligent control, establish system architecture of freeway multi-ramp control, put forward coordination control algorithm of multi-ramp, provide a systemic solution method to realize multi-ramp intelligent control. This method is relatively simple and easy to expand, simultaneity independent on specific freeway mathematical models, possess well adaptability. Moreover use the Matlab software carry through simulation, simulation result show that the algorithm is feasible and effective.","PeriodicalId":193335,"journal":{"name":"2012 International Conference on Computer Science and Information Processing (CSIP)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125601716","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
The experimental teaching evaluation studies under network environment 网络环境下的实验教学评价研究
Minghui Sun, Pengmei Zhang, Jilai Liu
Establishment of the evaluation system, conforming to students' realities with objective, impartial and easy operations, is a complex systematic engineering. It will help to reflect the learners' language ability, contribute to the coordination and unity of course objectives, teaching process and curriculum evaluation, and help to bring the positive feedback into play. This paper will discuss how to create a task-based teaching evaluation system in terms of different levels, diversification, formative assessment, summative assessment, and portfolios.
建立符合学生实际、客观、公正、易操作的评价体系是一项复杂的系统工程。它有助于反映学习者的语言能力,有助于课程目标、教学过程和课程评价的协调统一,有助于发挥积极反馈的作用。本文将从分层、多样化、形成性评价、总结性评价、组合评价等方面探讨如何构建任务型教学评价体系。
{"title":"The experimental teaching evaluation studies under network environment","authors":"Minghui Sun, Pengmei Zhang, Jilai Liu","doi":"10.1109/CSIP.2012.6309002","DOIUrl":"https://doi.org/10.1109/CSIP.2012.6309002","url":null,"abstract":"Establishment of the evaluation system, conforming to students' realities with objective, impartial and easy operations, is a complex systematic engineering. It will help to reflect the learners' language ability, contribute to the coordination and unity of course objectives, teaching process and curriculum evaluation, and help to bring the positive feedback into play. This paper will discuss how to create a task-based teaching evaluation system in terms of different levels, diversification, formative assessment, summative assessment, and portfolios.","PeriodicalId":193335,"journal":{"name":"2012 International Conference on Computer Science and Information Processing (CSIP)","volume":"76 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123295068","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
A fast approach for contact detection of polydisperse sphere particle systems simulation 多分散球粒子系统仿真中一种快速接触检测方法
Liu Bin
Collision detection is a basic computational problem arising in computer simulations of systems consisting of polydisperse particles. The Linked Cell List method is unable to efficiently deal with particles of greatly varying sizes. In order to improve efficiency of particle collision detection at high density. We present nearest neighbor list algorithm to collision detection among particles of greatly varying sizes. We achieved several times speed-up compared to Linked Cell List method. For larger size ratios, even better speed-up is expected.
碰撞检测是多分散粒子系统计算机模拟中的一个基本计算问题。链接单元表法不能有效地处理大小变化很大的粒子。为了提高高密度粒子碰撞检测的效率。提出了一种基于最近邻列表的粒子碰撞检测算法。与链接单元表方法相比,我们实现了数倍的加速。对于更大的尺寸比率,预期会有更好的加速。
{"title":"A fast approach for contact detection of polydisperse sphere particle systems simulation","authors":"Liu Bin","doi":"10.1109/CSIP.2012.6308930","DOIUrl":"https://doi.org/10.1109/CSIP.2012.6308930","url":null,"abstract":"Collision detection is a basic computational problem arising in computer simulations of systems consisting of polydisperse particles. The Linked Cell List method is unable to efficiently deal with particles of greatly varying sizes. In order to improve efficiency of particle collision detection at high density. We present nearest neighbor list algorithm to collision detection among particles of greatly varying sizes. We achieved several times speed-up compared to Linked Cell List method. For larger size ratios, even better speed-up is expected.","PeriodicalId":193335,"journal":{"name":"2012 International Conference on Computer Science and Information Processing (CSIP)","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125918747","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
A review on developing status of stereo video technology 综述了立体视频技术的发展现状
Yepin Lu, Suping Li
The paper focuses on the production, coding, transfer and receiving display of 3D video technology and mainly describes the mainstream and hot issue of disparity estimation of two way light signals. Coding technology of two ways video streaming is also deeply described. Pointing out that multi-view video and coding is the developing direction. The combination of sports/parallax estimation and fast algorithm such as fractal video coding and wavelet video coding is applied to the most advanced coding standard. Passive glasses style is the transition of 3D television for current period of time. The holographic stereo technology will be deeply developed in the future.
本文重点研究了三维视频技术的制作、编码、传输和接收显示,重点阐述了双向光信号视差估计的主流和热点问题。对双向视频流的编码技术也进行了深入的描述。指出多视点视频和编码是视频的发展方向。将运动/视差估计与分形视频编码、小波视频编码等快速算法相结合,应用于最先进的编码标准。被动式眼镜样式是当前一段时间内3D电视的过渡。全息立体技术将在未来得到深入发展。
{"title":"A review on developing status of stereo video technology","authors":"Yepin Lu, Suping Li","doi":"10.1109/CSIP.2012.6308953","DOIUrl":"https://doi.org/10.1109/CSIP.2012.6308953","url":null,"abstract":"The paper focuses on the production, coding, transfer and receiving display of 3D video technology and mainly describes the mainstream and hot issue of disparity estimation of two way light signals. Coding technology of two ways video streaming is also deeply described. Pointing out that multi-view video and coding is the developing direction. The combination of sports/parallax estimation and fast algorithm such as fractal video coding and wavelet video coding is applied to the most advanced coding standard. Passive glasses style is the transition of 3D television for current period of time. The holographic stereo technology will be deeply developed in the future.","PeriodicalId":193335,"journal":{"name":"2012 International Conference on Computer Science and Information Processing (CSIP)","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121082990","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
A stable routing protocol using segment-by-segment way in VANET 在VANET中采用分段方式的稳定路由协议
Yun Ge, Xin Fan, Xing Wang
Vehicular Ad hoc Network (VANET) is a new technology which has attracted enormous attention recently. For the high mobility of vehicles, to design a stable routing protocol becomes an important issue. This paper proposes a Stable Routing Protocol (SRP) for highway scenario using segment-by-segment way. Each node in the SRP protocol maintains a k-hop vicinity routing table. When a source node and a destination node are in the same vicinity, it adopts proactive routing. Otherwise, the route is carried according to location-based way. Simulation studies show that the SRP protocol outperforms Greedy Perimeter Stateless Routing (GPSR) in terms of average path length and average packet delivery ratio. When node density is moderate, the SRP protocol consumes some acceptable routing overhead to achieve good performance.
车载自组网(VANET)是近年来备受关注的一项新技术。针对车辆的高机动性,设计一种稳定的路由协议成为一个重要问题。本文提出了一种基于分段路由的高速公路稳定路由协议(SRP)。SRP协议中的每个节点都维护一个k-hop邻近路由表。当源节点和目的节点处于同一位置时,采用主动路由。否则按照基于位置的方式进行路由。仿真研究表明,SRP协议在平均路径长度和平均包投递率方面优于贪婪周边无状态路由(GPSR)。当节点密度适中时,SRP协议会消耗一些可接受的路由开销来获得良好的性能。
{"title":"A stable routing protocol using segment-by-segment way in VANET","authors":"Yun Ge, Xin Fan, Xing Wang","doi":"10.1109/CSIP.2012.6309043","DOIUrl":"https://doi.org/10.1109/CSIP.2012.6309043","url":null,"abstract":"Vehicular Ad hoc Network (VANET) is a new technology which has attracted enormous attention recently. For the high mobility of vehicles, to design a stable routing protocol becomes an important issue. This paper proposes a Stable Routing Protocol (SRP) for highway scenario using segment-by-segment way. Each node in the SRP protocol maintains a k-hop vicinity routing table. When a source node and a destination node are in the same vicinity, it adopts proactive routing. Otherwise, the route is carried according to location-based way. Simulation studies show that the SRP protocol outperforms Greedy Perimeter Stateless Routing (GPSR) in terms of average path length and average packet delivery ratio. When node density is moderate, the SRP protocol consumes some acceptable routing overhead to achieve good performance.","PeriodicalId":193335,"journal":{"name":"2012 International Conference on Computer Science and Information Processing (CSIP)","volume":"35 6","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121005394","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 7
期刊
2012 International Conference on Computer Science and Information Processing (CSIP)
全部 Acc. Chem. Res. ACS Applied Bio Materials ACS Appl. Electron. Mater. ACS Appl. Energy Mater. ACS Appl. Mater. Interfaces ACS Appl. Nano Mater. ACS Appl. Polym. Mater. ACS BIOMATER-SCI ENG ACS Catal. ACS Cent. Sci. ACS Chem. Biol. ACS Chemical Health & Safety ACS Chem. Neurosci. ACS Comb. Sci. ACS Earth Space Chem. ACS Energy Lett. ACS Infect. Dis. ACS Macro Lett. ACS Mater. Lett. ACS Med. Chem. Lett. ACS Nano ACS Omega ACS Photonics ACS Sens. ACS Sustainable Chem. Eng. ACS Synth. Biol. Anal. Chem. BIOCHEMISTRY-US Bioconjugate Chem. BIOMACROMOLECULES Chem. Res. Toxicol. Chem. Rev. Chem. Mater. CRYST GROWTH DES ENERG FUEL Environ. Sci. Technol. Environ. Sci. Technol. Lett. Eur. J. Inorg. Chem. IND ENG CHEM RES Inorg. Chem. J. Agric. Food. Chem. J. Chem. Eng. Data J. Chem. Educ. J. Chem. Inf. Model. J. Chem. Theory Comput. J. Med. Chem. J. Nat. Prod. J PROTEOME RES J. Am. Chem. Soc. LANGMUIR MACROMOLECULES Mol. Pharmaceutics Nano Lett. Org. Lett. ORG PROCESS RES DEV ORGANOMETALLICS J. Org. Chem. J. Phys. Chem. J. Phys. Chem. A J. Phys. Chem. B J. Phys. Chem. C J. Phys. Chem. Lett. Analyst Anal. Methods Biomater. Sci. Catal. Sci. Technol. Chem. Commun. Chem. Soc. Rev. CHEM EDUC RES PRACT CRYSTENGCOMM Dalton Trans. Energy Environ. Sci. ENVIRON SCI-NANO ENVIRON SCI-PROC IMP ENVIRON SCI-WAT RES Faraday Discuss. Food Funct. Green Chem. Inorg. Chem. Front. Integr. Biol. J. Anal. At. Spectrom. J. Mater. Chem. A J. Mater. Chem. B J. Mater. Chem. C Lab Chip Mater. Chem. Front. Mater. Horiz. MEDCHEMCOMM Metallomics Mol. Biosyst. Mol. Syst. Des. Eng. Nanoscale Nanoscale Horiz. Nat. Prod. Rep. New J. Chem. Org. Biomol. Chem. Org. Chem. Front. PHOTOCH PHOTOBIO SCI PCCP Polym. Chem.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1