Journal of Tissue Engineering and Regenerative Medicine最新文献

Implant-related infection is one of the main challenges in periodontal diseases. According to the zwitterionic properties of keratin, we aim to develop guided bone regeneration (GBR) membrane with antibacterial and bioactivity properties using a keratin coating. In this study, electrospun silk fibroin (SF)–Laponite (LAP) fibrous membranes were developed as GBR membranes, and keratin extracted from sheep wool was electrosprayed on them. Here, the role of electrospraying time (2, 3, and 4h) on the properties of the GBR membranes was investigated. After physicochemical characterization of the keratin-modified membranes, in vitro bioactivity and degradation rate of the membranes were studied in simulated body fluid and phosphate buffer saline, respectively. Moreover, proliferation and differentiation of mesenchymal stem cells were evaluated in contact with the keratin-modified SF–LAP membrane. Finally, the antibacterial activity of membranes against gram-positive bacteria (Staphylococcus aureus) was investigated. Results demonstrated the successful formation of homogeneous wool keratin coating on SF–LAP fibrous membranes using a simple electrospray process. While wool keratin coating significantly enhanced the elongation and hydrophilicity of the SF–LAP membrane, the mechanical strength was not changed. In addition, keratin coating significantly improved the bioactivity and degradation rate of SF–LAP membranes, owing to the carboxyl groups of amino acids in keratin coating. In addition, the synergic role of LAP nanoparticles and keratin coating drastically improved osteoblast proliferation and differentiation. Finally, the zwitterionic property of wool keratin coating originating from their equal positive (NH₃⁺) and negative (COO⁻) charges considerably improved the antibacterial activity of the SF–LAP membrane. Overall, keratin-coated SF–LAP fibrous membranes with significant mechanical and biological properties could have the potential for GBR membranes.

Mesenchymal stem cell therapy has suffered from wide variability in clinical efficacy, largely due to heterogeneous starting cell populations and large-scale cell death during and after implantation. Optimizing the manufacturing process has led to reproducible cell populations that can be cryopreserved for clinical applications. Nevertheless, ensuring a reproducible cell state that persists after cryopreservation remains a significant challenge, and is necessary to ensure reproducible clinical outcomes. Here we demonstrate how matrix-conjugated hydrogel cell culture materials can normalize a population of induced pluripotent stem cell derived mesenchymal stem cells (iPSC-MSCs) to display a defined secretory profile that promotes enhanced neovascularization in vitro and in vivo. Using a protein-conjugated biomaterials screen we identified two conditions—1 kPa collagen and 10 kPa fibronectin coated polyacrylamide gels—that promote reproducible secretion of pro-angiogenic and immunomodulatory cytokines from iPSC-MSCs that enhance tubulogenesis of endothelial cells in Geltrex and neovascularization in chick chorioallantoic membranes. Using defined culture substrates alone, we demonstrate maintenance of secretory activity after cryopreservation for the first time. This advance provides a simple and scalable approach for cell engineering and subsequent manufacturing, toward normalizing and priming a desired cell activity for clinical regenerative medicine.

In the context of regenerative endodontics research with the development of biomaterials, this work aimed to develop and test a prototype biomimetic bioreactor of a human tooth. The bioreactor was designed to reproduce a shaped dental canal connected with a cavity reproducing the periapical region and irrigated through two fluidic channels intended to reproduce the apical residual vascular supply. A test biomaterial composed of polylactic acid/polycaprolactone-tannic acid (PLA/PCL-TA) was produced by electrospinning/electrospraying and calibrated to be inserted in a dental canal. This biomaterial was first used to evaluate its imbibition capacity and the oximetry inside the bioreactor. Then, Dental Pulp Stem Cells (DPSCs) were cultured on PLA/PCL-TA cones for 1–3 weeks in the bioreactor; afterward cell adhesion, proliferation, and migration were histologically assessed. Complete imbibition biomaterial was obtained in 10 min and oximetry was stable over time. In the bioreactor, DPSCs were able to adhere, proliferate and migrate onto the surface and inside the biomaterial. In conclusion, this bioreactor was used successfully to test a biomaterial intended to support pulp regeneration and constitutes a new in vitro experimental model closer to clinical reality.

Resolvin D1 (RvD1) is a pro-resolving lipid mediator of inflammation, endogenously synthesized from omega-3 docosahexaenoic acid. The purpose of this study was to investigate the effect of RvD1 on bone regeneration using a rat calvarial defect model. Collagen 3D nanopore scaffold (COL) and Pluronic F127 hydrogel (F127) incorporated with RvD1 (RvD1-COL-F127 group) or COL and F127 (COL-F127 group) were implanted in symmetrical calvarial defects. After implantation, RvD1 was administrated subcutaneously every 7 days for 4 weeks. The rats were sacrificed at weeks 1 and 8 post-implantation. Tissue samples were analyzed by real-time reverse transcriptase-polymerase chain reaction and histology at week 1. Radiographical and histological analyses were done at week 8. At week 1, calvarial defects treated with RvD1 exhibited decreased numbers of inflammatory cells and tartrate-resistant acid phosphatase (TRAP) positive cells, greater numbers of newly formed blood vessels, upregulated gene expression of vascular endothelial growth factor and alkaline phosphatase, and downregulated gene expression of receptor activator of nuclear factor-κB ligand, interleukin-1β and tumor necrosis factor-α. At week 8, the radiographical results showed that osteoid area fraction of the RvD1-COL-F127 group was higher than that of the COL-F127 group, and histological examination exhibited enhanced osteoid formation and newly formed blood vessels in the RvD1-COL-F127 group. In conclusion, this study showed that RvD1 enhanced bone formation and vascularization in rat calvarial defects.

Three-dimensional (3D) cultivation platforms allow the creation of cell models, which more closely resemble in vivo-like cell behavior. Therefore, 3D cell culture platforms have started to replace conventional two-dimensional (2D) cultivation techniques in many fields. Besides the advantages of 3D culture, there are also some challenges: cultivation in 3D often results in an inhomogeneous microenvironment and therefore unique cultivation conditions for each cell inside the construct. As a result, the analysis and precise control over the singular cell state is limited in 3D. In this work, we address these challenges by exploring ways to monitor oxygen concentrations in gelatin methacryloyl (GelMA) 3D hydrogel culture at the cellular level using hypoxia reporter cells and deep within the construct using a non-invasive optical oxygen sensing spot. We could show that the appearance of oxygen limitations is more prominent in softer GelMA-hydrogels, which enable better cell spreading. Beyond demonstrating novel or space-resolved techniques of visualizing oxygen availability in hydrogel constructs, we also describe a method to create a stable and controlled oxygen gradient throughout the construct using a 3D printed flow-through chamber.

Periodontitis is an inflammatory disease characterized by tooth-supporting periodontal tissue destruction, including the cementum, periodontal ligament, and alveolar bone. To regenerate the damaged periodontal tissue, mesenchymal stem cells (MSCs) have attracted much scientific and medical attention. Recently, we generated clumps of MSCs/extracellular matrix (ECM) complexes (C-MSCs), which consist of cells and self-produced ECM. C-MSCs can be transplanted into lesion areas without artificial scaffold to induce tissue regeneration. To develop reliable scaffold-free periodontal tissue regenerative cell therapy by C-MSCs, this study investigated the periodontal tissue regenerative capacity of C-MSCs and the behavior of the transplanted cells. Rat bone marrow-derived MSCs were isolated from rat femur. Confluent cells were scratched using a micropipette tip and then torn off. The sheet was rolled to make a three-dimensional round clump of cells, C-MSCs. Then, ten C-MSCs were grafted into a rat periodontal fenestration defect model. To trace the grafted cells in the defect, PKH26-labeled cells were also employed. Micro-CT and histological analyses demonstrated that transplantation of C-MSCs induced successful periodontal tissue regeneration in the rat periodontal defect model. Interestingly, the majority of the cells in the reconstructed tissue, including cementum, periodontal ligaments, and alveolar bone, were PKH26 positive donor cells, suggesting the direct tissue formation by MSCs. This study demonstrates a promising scaffold-free MSCs transplantation strategy for periodontal disease using C-MSCs and offers the significance of multipotency of MSCs to induce successful periodontal tissue regeneration.

Efficient and large-scale expansion of mesenchymal stem/stromal cells (MSCs) has always been a formidable challenge to researchers in cell-based therapies and regenerative medicine. To reconcile major drawbacks of 2D planar culturing system, we innovatively developed an automated closed industrial scale cell production (ACISCP) platform based on GMP-grade microcarrier for culture of umbilical cord-mesenchymal stem/stromal cells (UCMSCs), in accordance with the criteria of stem cell bank. ACISCP system is a fully closed system, which employs different models of vivaSPIN bioreactors (CytoNiche Biotech, China) for scale-up cell culture and vivaPREP (CytoNiche Biotech, China) for automated cell harvesting and cell dosage preparation. To realize industrial scale expansion of UCMSCs, a three-stage expansion was conducted with 1 L, 5 and 15 L vivaSPIN bioreactors. Using 3D TableTrix^® and ACISCP system, we inoculated 1.5 × 10⁷ of UCMSCs into 1 L vivaSPIN bioreactor and finally scaled to two 15 L bioreactor. A final yield of 2.09 × 10¹⁰ cells with an overall expansion factor of 1975 within 13 days. The cells were harvested, concentrated, washed and prepared automatically with vivaPREP. The entire process was realized with ACISCP platform and was totally enclosed. Critical quality attributes (CQA) assessments and release tests of MSCs, including sterility, safety, purity, viability, identity, stability and potency were performed accordingly. The quality of cells harvested from 3D culture on the ACISCP and conventional 2D planar culture counterpart has no significant difference. This study provides a bioprocess engineering platform, harnessing GMP-grade 3D TableTrix^® microcarriers and ACISCP to achieve industrial-scale manufacturing of clinical-grade hMSCs.

A cell-free approach utilizing the paracrine effects of mesenchymal stromal cells is receiving attention in regenerative medicine. In the present study, we evaluated the effects of a conditioned medium of amniotic fluid-derived stromal cells (AFSC-CM) on bone metabolism. In mice, intraperitoneal injections of AFSC-CM increased bone mass and enhanced bone turnover. The precursor populations of myeloid and mesenchymal lineages, as well as endothelial cells in bone marrow, were also augmented by AFSC-CM administration. In an in vitro culture experiment, AFSC-CM increased osteoclast differentiation of bone marrow-derived macrophages, but had no significant effect on the osteogenic differentiation of preosteoblasts. However, AFSC-CM administration dramatically accelerated the migration and tube formation of endothelial cells, and a cytokine array showed that AFSC-CM contained many angiogenic factors. These results indicate that AFSC-CM exerts a bone anabolic effect by changing the bone marrow microenvironment, including angiogenesis and precursor expansion. Therefore, ameliorating marrow angiogenesis is a potential therapeutic strategy for bone regeneration, for which AFSCs can be a good cellular source.

Tissues with tubular structures play important roles in the human bodies, such as mass transport, nutrition exchange, and waste filtration. However, it remains a challenge to generate micro-scaffolds with well-defined luminal structure in biomedical field. In this study, we proposed a novel method to fabricate multi-component microfibers with multi-hollow structure via microfluidic spinning, which can subsequently be integrated with 3D printing for tissue-like block assembling. To achieve this goal, we fabricated a microchip using a 3D printed template with adjustable heights. Utilizing this microchip, we successfully generated the Calcium alginate microfibers with multi-components and defined hollow structures in a controllable manner. Then this microfluidic spinning method was integrated with a 3D mobile platform to assemble the microfibers into a grid-like 3D architecture. The resulted 3D scaffolds exhibited good organization and maintained the hollow structure of the fibers. Furthermore, we successfully developed a bronchus model utilizing this strategy by loading pulmonary bronchial epithelium cells and endothelial cells into microfibers with two hollow structures. The present strategy provides a potential platform to rebuild the lumen-like tissues using microfibers.

The increase of individuals with Osteoarthritis (OA) has generated an increase in public spending in the treatments, which are still not that effective. So, the purpose of this study was to analyze and compare four types of interventions: platelet-rich plasma (PRP), adipose-derived stem cells (ADSCs), ADSCs + PRP and the standard surgical video arthroscopy (All groups passed through standard arthroscopy before intervention). The evaluation was performed by applying the questionnaires Western Ontario McMaster Universities, Short Form Health Survey 36 and Visual Analog Pain Scale, also by analyzing the synovial fluid (inflammatory cytokines, enzymatic, colorimetric and viscosity analysis), this evaluation happened in two moments: before the surgical procedures and after 6 months of the interventions and also was made a comparison to standard arthroscopy. The questionnaires results showed a greater improvement in the scores of the domains analyzed in the ADSCs + PRP group, followed by the ADSCs and PRP group. In the evaluation of inflammatory cytokines, there was a significant reduction in the cytokine IL-1b only in the ADSCs + PRP group (46%) and ADSCs (31%), of IL-6 in the ADSCs + PRP group (72%), of IL-8 in the ADSCs + PRP group (50%) and ADSCs (31%), and TNF in the ADSCs + PRP group (46%). There was also a significant increase in the amount of total proteins (79%) in the control group and polymorphonuclear cells (47%) in the ADSCs + PRP group. Taking all the results into account, we infer that therapies with ADSCs + PRP and only ADSCs are safe and effective over 6 months for the improvement of pain, functional capacity and joint inflammation in volunteers with OA. It is also considered that the use of ADSCs + PRP, particularly, is a promising alternative to help manage this disease, due to the better results presented among the four propose interventions.