Pub Date : 2022-10-12DOI: 10.18799/24056529/2022/1/320
A. Leonov, A. Supueva
The reliability of a low-voltage asynchronous electric motor is primarily determined by the reliability of the stator winding insulation. Common reasons for the failure of the insulation system are the unsatisfactory quality of the enameled wires and electrical insulating materials used for imperfection and violation of the technological process of winding and insulating work, and the discrepancy between operating modes. In the vast majority of cases, failures occur due to damage to the inter-turn insulation as the weakest element. This causes the need to study the insulation system resistance to the formation of defects. The results of assessing the stability of the insulation of winding wires to defect formation are obtained, taking into account the features of the operational loads characteristic of frequency-controlled drives with pulse-width modulation of the output voltage and the influence of the inter-turn insulation defectiveness level on its reliability indicators is also studied. The authors have developed the measures to reduce the defectiveness of inter-turn insulation at the manufacturing stage and during operation. This will ensure a minimum level of insulation defects and increase the resource of asynchronous electric motors by reducing the number of failures.
{"title":"PROVIDING A MINIMUM DEFECTIVENESS OF INTER-TURN INSULATION AT THE MANUFACTURING STAGE AND DURING THE EXPLOITATION","authors":"A. Leonov, A. Supueva","doi":"10.18799/24056529/2022/1/320","DOIUrl":"https://doi.org/10.18799/24056529/2022/1/320","url":null,"abstract":"The reliability of a low-voltage asynchronous electric motor is primarily determined by the reliability of the stator winding insulation. Common reasons for the failure of the insulation system are the unsatisfactory quality of the enameled wires and electrical insulating materials used for imperfection and violation of the technological process of winding and insulating work, and the discrepancy between operating modes. In the vast majority of cases, failures occur due to damage to the inter-turn insulation as the weakest element. This causes the need to study the insulation system resistance to the formation of defects. The results of assessing the stability of the insulation of winding wires to defect formation are obtained, taking into account the features of the operational loads characteristic of frequency-controlled drives with pulse-width modulation of the output voltage and the influence of the inter-turn insulation defectiveness level on its reliability indicators is also studied. The authors have developed the measures to reduce the defectiveness of inter-turn insulation at the manufacturing stage and during operation. This will ensure a minimum level of insulation defects and increase the resource of asynchronous electric motors by reducing the number of failures.","PeriodicalId":21019,"journal":{"name":"Resource-Efficient Technologies","volume":"32 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74281195","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-08-23DOI: 10.18799/24056537/2021/4/317
A. S. Sorogin, R. Khamitov
To cool solar panels in hot season, it is necessary to use special cooling devices. The most optimal way of cooling is the use of liquid cooling, realized by means of a pump. This article provides an overview and evaluation of ways to cool solar panels using various devices. The relevance of the research is caused by the need to reduce the temperature of solar panels in order to increase the output power in the hot season. The main aim of the research is to compare and choose the most optimal way to cool solar panels. Methods: comparative analysis, mathematical modeling in the ANSYS environment. Results. Comparative characteristic of TEM, radiators, fans and liquid cooling is given, an example of cooling a solar panel using liquid cooling to spray a liquid flow of 29 l/min is calculated. The panels will cool down from 45 to 35 °C in 4,7 minutes. For one EasySunSolar solar panel with a capacity of 100 W, costing $100, taking into account electrical work, an additional heat sink module will cost about $50.
{"title":"WAYS TO INCREASE THE EFFICIENCY OF SOLAR PANELS OPERATING IN ISOLATED POWER SUPPLY SYSTEMS","authors":"A. S. Sorogin, R. Khamitov","doi":"10.18799/24056537/2021/4/317","DOIUrl":"https://doi.org/10.18799/24056537/2021/4/317","url":null,"abstract":"To cool solar panels in hot season, it is necessary to use special cooling devices. The most optimal way of cooling is the use of liquid cooling, realized by means of a pump. This article provides an overview and evaluation of ways to cool solar panels using various devices. The relevance of the research is caused by the need to reduce the temperature of solar panels in order to increase the output power in the hot season. The main aim of the research is to compare and choose the most optimal way to cool solar panels. Methods: comparative analysis, mathematical modeling in the ANSYS environment. Results. Comparative characteristic of TEM, radiators, fans and liquid cooling is given, an example of cooling a solar panel using liquid cooling to spray a liquid flow of 29 l/min is calculated. The panels will cool down from 45 to 35 °C in 4,7 minutes. For one EasySunSolar solar panel with a capacity of 100 W, costing $100, taking into account electrical work, an additional heat sink module will cost about $50.","PeriodicalId":21019,"journal":{"name":"Resource-Efficient Technologies","volume":"10 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-08-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90902750","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-08-18DOI: 10.18799/24056537/2021/3/316
K. Postoyankova, V. Polishchuk, A. Shuvalova
Currently, there are practically no automated systems for controlling power flow within the specified limits when the power line is overloaded by active power. Regulation is assigned to the dispatchers of the power system or is carried out by means of emergency automation, which disconnects consumers. Therefore, an urgent task is to expand the arsenal of tools for automatic control of active power flow in overload mode. Relevance. A significant increase in electricity consumers leads to a complication of the electric power system. The workload for dispatching personnel is increasing. Maintaining the smooth operation of the elements of the power system is a very important and responsible task. In modern electric power industry, timely warning and elimination of overloads of network elements are relevant. The study aims are development and research of an intelligent automatic control system for the flow of active power along a power line based on the mathematical apparatus of fuzzy logic. The system is based on the use of the regulating effect of the load. Research methodology. Methods of calculating static load model during their actualization were used. The method of fuzzy sets was used in the construction of an intelligence control system for active power flows in overload condition. The effectiveness was estimated by expert methods. Results. The use of artificial intelligence methods for automatic regulation of transformer voltage under load allows up to 5–7 % reducing the flow of active power in overload mode.
{"title":"SYNTHESIS OF AN AUTOMATED CONTROL SYSTEM FOR THE FLOW OF ACTIVE POWER ALONG A POWER LINE IN OVERLOAD CONDITION","authors":"K. Postoyankova, V. Polishchuk, A. Shuvalova","doi":"10.18799/24056537/2021/3/316","DOIUrl":"https://doi.org/10.18799/24056537/2021/3/316","url":null,"abstract":"Currently, there are practically no automated systems for controlling power flow within the specified limits when the power line is overloaded by active power. Regulation is assigned to the dispatchers of the power system or is carried out by means of emergency automation, which disconnects consumers. Therefore, an urgent task is to expand the arsenal of tools for automatic control of active power flow in overload mode. Relevance. A significant increase in electricity consumers leads to a complication of the electric power system. The workload for dispatching personnel is increasing. Maintaining the smooth operation of the elements of the power system is a very important and responsible task. In modern electric power industry, timely warning and elimination of overloads of network elements are relevant. The study aims are development and research of an intelligent automatic control system for the flow of active power along a power line based on the mathematical apparatus of fuzzy logic. The system is based on the use of the regulating effect of the load. Research methodology. Methods of calculating static load model during their actualization were used. The method of fuzzy sets was used in the construction of an intelligence control system for active power flows in overload condition. The effectiveness was estimated by expert methods. Results. The use of artificial intelligence methods for automatic regulation of transformer voltage under load allows up to 5–7 % reducing the flow of active power in overload mode.","PeriodicalId":21019,"journal":{"name":"Resource-Efficient Technologies","volume":"15 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-08-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"73709740","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-01DOI: 10.18799/24056529/2021/2/308
D. Bunkov
To support modern requirements for an induction electric drive of pipeline valves, the most promising is the organization of a filed oriented control system, the setting of which is extremely difficult without the parameters of the equivalent circuit of an induction machine. This article provides a technique of setting a field oriented control system for induction electric drive of pipeline valves based on equivalent circuit parameters, estimated by falling phase current curve. The main aim of the research is to test the functioning of an induction filed oriented electric drive using a load stand, the setting of which is made on the basis of parameters previously estimated by falling phase current curve. Methods. To achieve the goal of the research, theoretical and experimental research methods were used. Theoretical research methods include the theory of electric drive, the theory of automatic control systems, the theory of electrical machines. Experimental research were carried out using a load stand that provides the required level of load on the shaft of the tested induction machine. Results. Suggested the technique of setting a field oriented control system for induction electric drive of pipeline valves based on equivalent circuit parameters, estimated by falling phase current curve. Relative values of deviations of current, speed and torque are obtained at the nominal level of load on the shaft of an induction machine. The applicability of the proposed technique using a loading stand was confirmed.
{"title":"TECHNIQUE OF SETTING UP A PIPELINE VALVE ELECTRIC ACTUATORS CONTROL SYSTEM USING THE EQUIVALENT CIRCUIT PARAMETERS, ESTIMATED BY FALLING CURRENT CURVE","authors":"D. Bunkov","doi":"10.18799/24056529/2021/2/308","DOIUrl":"https://doi.org/10.18799/24056529/2021/2/308","url":null,"abstract":"To support modern requirements for an induction electric drive of pipeline valves, the most promising is the organization of a filed oriented control system, the setting of which is extremely difficult without the parameters of the equivalent circuit of an induction machine. This article provides a technique of setting a field oriented control system for induction electric drive of pipeline valves based on equivalent circuit parameters, estimated by falling phase current curve. The main aim of the research is to test the functioning of an induction filed oriented electric drive using a load stand, the setting of which is made on the basis of parameters previously estimated by falling phase current curve. Methods. To achieve the goal of the research, theoretical and experimental research methods were used. Theoretical research methods include the theory of electric drive, the theory of automatic control systems, the theory of electrical machines. Experimental research were carried out using a load stand that provides the required level of load on the shaft of the tested induction machine. Results. Suggested the technique of setting a field oriented control system for induction electric drive of pipeline valves based on equivalent circuit parameters, estimated by falling phase current curve. Relative values of deviations of current, speed and torque are obtained at the nominal level of load on the shaft of an induction machine. The applicability of the proposed technique using a loading stand was confirmed.","PeriodicalId":21019,"journal":{"name":"Resource-Efficient Technologies","volume":"41 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76831391","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-01DOI: 10.18799/24056537/2021/2/308
D. Bunkov
To support modern requirements for an induction electric drive of pipeline valves, the most promising is the organization of a filed oriented control system, the setting of which is extremely difficult without the parameters of the equivalent circuit of an induction machine. This article provides a technique of setting a field oriented control system for induction electric drive of pipeline valves based on equivalent circuit parameters, estimated by falling phase current curve. The main aim of the research is to test the functioning of an induction filed oriented electric drive using a load stand, the setting of which is made on the basis of parameters previously estimated by falling phase current curve. Methods. To achieve the goal of the research, theoretical and experimental research methods were used. Theoretical research methods include the theory of electric drive, the theory of automatic control systems, the theory of electrical machines. Experimental research were carried out using a load stand that provides the required level of load on the shaft of the tested induction machine. Results. Suggested the technique of setting a field oriented control system for induction electric drive of pipeline valves based on equivalent circuit parameters, estimated by falling phase current curve. Relative values of deviations of current, speed and torque are obtained at the nominal level of load on the shaft of an induction machine. The applicability of the proposed technique using a loading stand was confirmed.
{"title":"ENGINEERING PRACTICE OF SETTING A FIELD ORIENTED CONTROL SYSTEM FOR INDUCTION ELECTRIC DRIVE OF PIPELINE VALVES BASED ON EQUIVALENT CIRCUIT PARAMETERS, ESTIMATED BY FALLING PHASE CURRENT CURVE","authors":"D. Bunkov","doi":"10.18799/24056537/2021/2/308","DOIUrl":"https://doi.org/10.18799/24056537/2021/2/308","url":null,"abstract":"To support modern requirements for an induction electric drive of pipeline valves, the most promising is the organization of a filed oriented control system, the setting of which is extremely difficult without the parameters of the equivalent circuit of an induction machine. This article provides a technique of setting a field oriented control system for induction electric drive of pipeline valves based on equivalent circuit parameters, estimated by falling phase current curve. The main aim of the research is to test the functioning of an induction filed oriented electric drive using a load stand, the setting of which is made on the basis of parameters previously estimated by falling phase current curve. Methods. To achieve the goal of the research, theoretical and experimental research methods were used. Theoretical research methods include the theory of electric drive, the theory of automatic control systems, the theory of electrical machines. Experimental research were carried out using a load stand that provides the required level of load on the shaft of the tested induction machine. Results. Suggested the technique of setting a field oriented control system for induction electric drive of pipeline valves based on equivalent circuit parameters, estimated by falling phase current curve. Relative values of deviations of current, speed and torque are obtained at the nominal level of load on the shaft of an induction machine. The applicability of the proposed technique using a loading stand was confirmed.","PeriodicalId":21019,"journal":{"name":"Resource-Efficient Technologies","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89226834","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-05-14DOI: 10.18799/24056537/2021/1/286
V. Zhdankin
This review summarizes industrial applications of inorganic and organic polyvalent (hypervalent) iodine compounds. Inorganic iodate salts have found some application as a dietary supplements and food additives. Iodine pentafluoride is used as industrial fluorinating reagent, and iodine pentoxide is a powerful and selective oxidant that is particularly useful in analytical chemistry. Common organic hypervalent iodine reagents such as (dichloroiodo)benzene and (diacetoxyiodo)benzene are occasionally used in chemical industry as the reagents for production of important pharmaceutical intermediates. Iodonium salts have found industrial application as photoinitiators for cationic photopolymerizations. Various iodonium compounds are widely used as precursors to [18F]-fluorinated radiotracers in the Positron Emission Tomography (PET).
{"title":"APPLICATION OF HYPERVALENT IODINE COMPOUNDS IN ADVANCED GREEN TECHNOLOGIES (IN PRESS)","authors":"V. Zhdankin","doi":"10.18799/24056537/2021/1/286","DOIUrl":"https://doi.org/10.18799/24056537/2021/1/286","url":null,"abstract":"This review summarizes industrial applications of inorganic and organic polyvalent (hypervalent) iodine compounds. Inorganic iodate salts have found some application as a dietary supplements and food additives. Iodine pentafluoride is used as industrial fluorinating reagent, and iodine pentoxide is a powerful and selective oxidant that is particularly useful in analytical chemistry. Common organic hypervalent iodine reagents such as (dichloroiodo)benzene and (diacetoxyiodo)benzene are occasionally used in chemical industry as the reagents for production of important pharmaceutical intermediates. Iodonium salts have found industrial application as photoinitiators for cationic photopolymerizations. Various iodonium compounds are widely used as precursors to [18F]-fluorinated radiotracers in the Positron Emission Tomography (PET).","PeriodicalId":21019,"journal":{"name":"Resource-Efficient Technologies","volume":"15 12 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-05-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86665195","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-05-14DOI: 10.18799/24056537/2021/1/285
S. Manikandaselvi, A. Sudha, V. Vadivel, C. Raj, C. Prabu, P. Brindha
The search for pioneering nutraceuticals from plants is genuine and crucial. Based on the literature review as per Ayurvedic texts, four common plants Capparis spinosa L. (flower buds), Caesalpinia bonducella L.(seeds), Luffa acutangula L.(fruits) and Cassia occidentalis L. (aerial parts) were selected to develop nutraceuticals and were standardized. Based on the nutraceutical and pharmacological efficacies of the individual plant drugs selected, three different herbal nutraceutical formulations were prepared. Nutraceuticals before and after lyophilization were subjected to standardization studies. Nutraceutical formulation 3 developed was found to be best due to its high nutraceutical values when compared to others. Results depicted that up to the dose level of 2000 mg/kg.bw (acute oral toxicity), 1000 mg/kg.bw (sub-acute oral toxicity), it doesn’t produced any lethality in the experimental animals. To conclude that the selected herbal formulation developed from selected plant ingredients was found to possess distinct nutraceutical values. The present work contributes for the development of human healthcare through nutraceutical product with remarkable medicinal properties in herbal way.
{"title":"BIOCHEMICAL EVALUATION AND SCIENTIFIC VALIDATION STUDIES OF AN HERBAL NUTRACEUTICAL (IN PRESS)","authors":"S. Manikandaselvi, A. Sudha, V. Vadivel, C. Raj, C. Prabu, P. Brindha","doi":"10.18799/24056537/2021/1/285","DOIUrl":"https://doi.org/10.18799/24056537/2021/1/285","url":null,"abstract":"The search for pioneering nutraceuticals from plants is genuine and crucial. Based on the literature review as per Ayurvedic texts, four common plants Capparis spinosa L. (flower buds), Caesalpinia bonducella L.(seeds), Luffa acutangula L.(fruits) and Cassia occidentalis L. (aerial parts) were selected to develop nutraceuticals and were standardized. Based on the nutraceutical and pharmacological efficacies of the individual plant drugs selected, three different herbal nutraceutical formulations were prepared. Nutraceuticals before and after lyophilization were subjected to standardization studies. Nutraceutical formulation 3 developed was found to be best due to its high nutraceutical values when compared to others. Results depicted that up to the dose level of 2000 mg/kg.bw (acute oral toxicity), 1000 mg/kg.bw (sub-acute oral toxicity), it doesn’t produced any lethality in the experimental animals. To conclude that the selected herbal formulation developed from selected plant ingredients was found to possess distinct nutraceutical values. The present work contributes for the development of human healthcare through nutraceutical product with remarkable medicinal properties in herbal way.","PeriodicalId":21019,"journal":{"name":"Resource-Efficient Technologies","volume":"98 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-05-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76531234","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-05-13DOI: 10.18799/24056537/2021/1/281
T. Gangadhar, D. Girish
In the present work, Al7075 based hybrid composites was developed using stir casting technique. Al7075 hybrid composites with different weight percentage of Mica, Graphite and E-glass fiber were developed to study the effect of these reinforcements on microstructure and mechanical properties, E-Glass fiber is kept constant at 0, 2, 4%, Mica is varied from 1-3% in steps of 1 and Graphite varied from 1-5% in steps of 2. It can be seen that the three peaks corresponding to Al were seen at 38º, 46º and 65º 2θ angles and small peaks related to all the three reinforcement mica, graphite and E-glass fiber were observed in the XRD pattern. Grain size analysis was examined using Clemex Image-Analyzer software, it was observed that decrease in grain size of Al7075 matrix was found to decrease with the increase in reinforcements, Hardness was found to increase with increase in reinforcement content whether it could E-glass fiber from 0% - 4% or mica from 1% - 3% or graphite content from 1% - 5%. Ultimate tensile strength increased with the increase in reinforcement content both before and after heat treatment.
{"title":"COMPARATIVE MECHANICAL PROPERTIES STUDIES ON HEAT & UNHEAT TREATED AL7075 ALLOY HYBRID COMPOSITES","authors":"T. Gangadhar, D. Girish","doi":"10.18799/24056537/2021/1/281","DOIUrl":"https://doi.org/10.18799/24056537/2021/1/281","url":null,"abstract":"In the present work, Al7075 based hybrid composites was developed using stir casting technique. Al7075 hybrid composites with different weight percentage of Mica, Graphite and E-glass fiber were developed to study the effect of these reinforcements on microstructure and mechanical properties, E-Glass fiber is kept constant at 0, 2, 4%, Mica is varied from 1-3% in steps of 1 and Graphite varied from 1-5% in steps of 2. It can be seen that the three peaks corresponding to Al were seen at 38º, 46º and 65º 2θ angles and small peaks related to all the three reinforcement mica, graphite and E-glass fiber were observed in the XRD pattern. Grain size analysis was examined using Clemex Image-Analyzer software, it was observed that decrease in grain size of Al7075 matrix was found to decrease with the increase in reinforcements, Hardness was found to increase with increase in reinforcement content whether it could E-glass fiber from 0% - 4% or mica from 1% - 3% or graphite content from 1% - 5%. Ultimate tensile strength increased with the increase in reinforcement content both before and after heat treatment.","PeriodicalId":21019,"journal":{"name":"Resource-Efficient Technologies","volume":"128 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-05-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90891715","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-01-02DOI: 10.18799/24056537/2020/4/280
D. Gvozdyakov, V. Gubin, A. Zenkov
The aim of this work is to substantiate the efficiency of ethyl or isoamyl alcohol application as the third component of coal-water fuels based on the results of experimental study of coaxial spraying. Studies of alcohols influence on spraying characteristics of coal-water fuels can rarely be found in the literature. Instantaneous fields of fuel droplets velocities in several cross-sections of the jet were determined using Particle Image Velocimetry method. Interferometric Particle Imaging method was used to determine droplets distribution by size in the jet of sprayed coal-water fuel. It was experimentally established that substitution of water (no more than 3 % by weight) in the composition of coal-water slurry by fairly typical alcohols leads to decrease in droplet velocities of alcohol-coal-water slurries in comparison with conventional coal-water fuel by 15–18 %. Concentration of sufficiently small fuel droplets (up to 200 microns) increases by 13.4±0.2 % and by 6.6±0.2 % during atomization of alcohol-coal-water slurries with addition of ethyl and isoamyl alcohol, respectively. Introduction of no more than 5 % by weight of the studied alcohols into the coal-water slurry will reduce the cost of fuel by 15–73 % in comparison with fuel oil. Influence of small additives of ethyl and isoamyl alcohol in the composition of coal-water fuel on spraying characteristics proves the possibility of efficient application of such three-component slurries in thermal power engineering. The results obtained are of practical significance, since they illustrate the possibility of reducing the ignition delay time for droplets of alcohol-coal-water slurries after they are sprayed in the furnaces of boiler units.
{"title":"CHARACTERISTICS OF ALCOHOL-COAL-WATER SLURRIES SPRAYING","authors":"D. Gvozdyakov, V. Gubin, A. Zenkov","doi":"10.18799/24056537/2020/4/280","DOIUrl":"https://doi.org/10.18799/24056537/2020/4/280","url":null,"abstract":"The aim of this work is to substantiate the efficiency of ethyl or isoamyl alcohol application as the third component of coal-water fuels based on the results of experimental study of coaxial spraying. Studies of alcohols influence on spraying characteristics of coal-water fuels can rarely be found in the literature. Instantaneous fields of fuel droplets velocities in several cross-sections of the jet were determined using Particle Image Velocimetry method. Interferometric Particle Imaging method was used to determine droplets distribution by size in the jet of sprayed coal-water fuel. It was experimentally established that substitution of water (no more than 3 % by weight) in the composition of coal-water slurry by fairly typical alcohols leads to decrease in droplet velocities of alcohol-coal-water slurries in comparison with conventional coal-water fuel by 15–18 %. Concentration of sufficiently small fuel droplets (up to 200 microns) increases by 13.4±0.2 % and by 6.6±0.2 % during atomization of alcohol-coal-water slurries with addition of ethyl and isoamyl alcohol, respectively. Introduction of no more than 5 % by weight of the studied alcohols into the coal-water slurry will reduce the cost of fuel by 15–73 % in comparison with fuel oil. Influence of small additives of ethyl and isoamyl alcohol in the composition of coal-water fuel on spraying characteristics proves the possibility of efficient application of such three-component slurries in thermal power engineering. The results obtained are of practical significance, since they illustrate the possibility of reducing the ignition delay time for droplets of alcohol-coal-water slurries after they are sprayed in the furnaces of boiler units.","PeriodicalId":21019,"journal":{"name":"Resource-Efficient Technologies","volume":"74 1","pages":"30-39"},"PeriodicalIF":0.0,"publicationDate":"2021-01-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83985081","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-12-29DOI: 10.18799/24056537/2020/4/277
C. L. Majadas, J. M. Peñaloga, R. Salvador
Solar energy intermittency is one of the main challenges encountered by thermal energy storage systems in concentrated solar power plants due to the low heat transfer rates during charging operations. The critical thermophysical property to be considered for combating this problem is the thermal conductivity. Thus, base fluids with dispersed nanoparticles, better known as nanofluids, have become materials with great potential since they enhance efficiency during charging intervals by increasing the charged material's thermal conductivity by up to 89 %. By gathering and analyzing results from various studies in nanofluids, it was observed that there is a considerable improvement in the thermal storage material compared with the base fluid alone. There is also an increase in the thermal conductivity as nanoparticles are added. Obtaining an increase as great as 99 % allows faster rates of heat transfer. Overall, this may significantly improve the efficiency of thermal energy storage systems in concentrated solar power plants.
{"title":"REVIEW AND EVALUATION OF NANOFLUIDS AS PROSPECT THERMAL ENERGY STORAGE MATERIAL FOR CONCENTRATED SOLAR POWER APPLICATION","authors":"C. L. Majadas, J. M. Peñaloga, R. Salvador","doi":"10.18799/24056537/2020/4/277","DOIUrl":"https://doi.org/10.18799/24056537/2020/4/277","url":null,"abstract":"Solar energy intermittency is one of the main challenges encountered by thermal energy storage systems in concentrated solar power plants due to the low heat transfer rates during charging operations. The critical thermophysical property to be considered for combating this problem is the thermal conductivity. Thus, base fluids with dispersed nanoparticles, better known as nanofluids, have become materials with great potential since they enhance efficiency during charging intervals by increasing the charged material's thermal conductivity by up to 89 %. By gathering and analyzing results from various studies in nanofluids, it was observed that there is a considerable improvement in the thermal storage material compared with the base fluid alone. There is also an increase in the thermal conductivity as nanoparticles are added. Obtaining an increase as great as 99 % allows faster rates of heat transfer. Overall, this may significantly improve the efficiency of thermal energy storage systems in concentrated solar power plants.","PeriodicalId":21019,"journal":{"name":"Resource-Efficient Technologies","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-12-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76829018","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：