This paper research on the NBR-PVC polymer into the sea pile concrete, by repeated freeze-thaw damage, and tested to the compressive properties, flexural properties, mass loss and loss modulus of elasticity. Try to configure for high performance and durability sea pile concrete in North Chinese coastal areas. By this test, 10%~15% NBR-PVC quality ratio polymer into the sea pile concrete, it is improvement effected to the comprehensive performance of the concrete and greatly extend the design life.
{"title":"Based on the Experimental Simulation of NBR-PVC Double Mixing Polymer Modified Cement Concrete Pier Pile Durability Analysis","authors":"Wu Xiangyu, Xu Dandan","doi":"10.1109/ICICTA.2015.283","DOIUrl":"https://doi.org/10.1109/ICICTA.2015.283","url":null,"abstract":"This paper research on the NBR-PVC polymer into the sea pile concrete, by repeated freeze-thaw damage, and tested to the compressive properties, flexural properties, mass loss and loss modulus of elasticity. Try to configure for high performance and durability sea pile concrete in North Chinese coastal areas. By this test, 10%~15% NBR-PVC quality ratio polymer into the sea pile concrete, it is improvement effected to the comprehensive performance of the concrete and greatly extend the design life.","PeriodicalId":231694,"journal":{"name":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2015-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116353235","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Due to the long distance along the railway in our country, the railway crossing equipment has some noodles wide, more scattered, not easy to the characteristics of centralized management. To improve the level of the management of the railway signal equipment maintenance, this paper studies the signal equipment remote monitoring system. The system USES acquisition crossing analog and switch quantity information, realized the real-time monitoring of signal equipment, Through the signal system of real-time monitor and record the basic running condition, can timely find equipment problems and timely alarm, notify the railway maintenance staff to take effective measures to eliminate rapidly.
{"title":"Railway Crossing Signal Equipment Remote Monitoring System","authors":"Qiao Shouhe","doi":"10.1109/ICICTA.2015.171","DOIUrl":"https://doi.org/10.1109/ICICTA.2015.171","url":null,"abstract":"Due to the long distance along the railway in our country, the railway crossing equipment has some noodles wide, more scattered, not easy to the characteristics of centralized management. To improve the level of the management of the railway signal equipment maintenance, this paper studies the signal equipment remote monitoring system. The system USES acquisition crossing analog and switch quantity information, realized the real-time monitoring of signal equipment, Through the signal system of real-time monitor and record the basic running condition, can timely find equipment problems and timely alarm, notify the railway maintenance staff to take effective measures to eliminate rapidly.","PeriodicalId":231694,"journal":{"name":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2015-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116470594","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The pile foundation is widely used in the foundation engineering. Realizing the green construction of the pile foundation can promote the sustainable development of construction industry. The comparison between the green construction scheme of the pile foundation needs to be solved by the scientific theory system. The pile foundation engineering includes four pile foundation. The basic theory of green construction includes the foreign status of green construction, the domestic status of green construction, the concept of green construction and the main content of green construction etc. The improved value engineering theory introduces the analytic hierarchy process to the function evaluation of the value engineering. Combined with the requirement of the green construction and the characteristics of the pile foundation, the evaluation index system of the pile foundation green construction is established. Combined with the improved value engineering theory and the establishment of the pile foundation green construction evaluation index system, establish the evaluation model of the pile foundation green construction scheme. The model can thoroughly analyze the function of the green construction scheme, scientifically determine the function coefficient of the construction plan, and guide the whole process of the construction. The conclusion of the model can reflect the green construction of the pile foundation.
{"title":"The Evaluation Model of the Pile Foundation Green Construction Scheme Based on the Improved Value Engineering Theory","authors":"Jingning Yan","doi":"10.1109/ICICTA.2015.247","DOIUrl":"https://doi.org/10.1109/ICICTA.2015.247","url":null,"abstract":"The pile foundation is widely used in the foundation engineering. Realizing the green construction of the pile foundation can promote the sustainable development of construction industry. The comparison between the green construction scheme of the pile foundation needs to be solved by the scientific theory system. The pile foundation engineering includes four pile foundation. The basic theory of green construction includes the foreign status of green construction, the domestic status of green construction, the concept of green construction and the main content of green construction etc. The improved value engineering theory introduces the analytic hierarchy process to the function evaluation of the value engineering. Combined with the requirement of the green construction and the characteristics of the pile foundation, the evaluation index system of the pile foundation green construction is established. Combined with the improved value engineering theory and the establishment of the pile foundation green construction evaluation index system, establish the evaluation model of the pile foundation green construction scheme. The model can thoroughly analyze the function of the green construction scheme, scientifically determine the function coefficient of the construction plan, and guide the whole process of the construction. The conclusion of the model can reflect the green construction of the pile foundation.","PeriodicalId":231694,"journal":{"name":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2015-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121655918","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This paper introduces the method of constructing the sea clutter, sea clutter amplitude distribution and power spectrum distribution characteristics of the model, using the ZMNL method of the K distribution sea clutter simulation, simulation results show that, it greatly reduces the amount of computation based on ZMNL method of K Distribution Sea Clutter Modeling and Simulation, improves the simulation speed.
{"title":"K Distribution Sea Clutter Modeling and Simulation Based on ZMNL","authors":"Zhou Jie, Chen Dong, Sun De-wei","doi":"10.1109/ICICTA.2015.279","DOIUrl":"https://doi.org/10.1109/ICICTA.2015.279","url":null,"abstract":"This paper introduces the method of constructing the sea clutter, sea clutter amplitude distribution and power spectrum distribution characteristics of the model, using the ZMNL method of the K distribution sea clutter simulation, simulation results show that, it greatly reduces the amount of computation based on ZMNL method of K Distribution Sea Clutter Modeling and Simulation, improves the simulation speed.","PeriodicalId":231694,"journal":{"name":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2015-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126544515","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Museum collection display in the digital age has been transformed from the simple exhibition into the combination of real objects and virtual display. With mobile intelligent terminal coming into the museum information dissemination, the one-way information transfer is gradually transformed to be a two-way interactive communication mode. According to the characteristics of intelligent terminal APP, the principles and methods for museum information dissemination are based on APP have been explored, and the basic framework of Museum APP is based on user experiences has been established, which provides a useful exploration for promoting the image of museums in the digital age and carrying out public education and more effectively implementing the information dissemination.
{"title":"New Approach of Museums Information Dissemination in the Digital Age - Taking the Development and Design of Museum APP as an Example","authors":"Wang Ying","doi":"10.1109/ICICTA.2015.145","DOIUrl":"https://doi.org/10.1109/ICICTA.2015.145","url":null,"abstract":"Museum collection display in the digital age has been transformed from the simple exhibition into the combination of real objects and virtual display. With mobile intelligent terminal coming into the museum information dissemination, the one-way information transfer is gradually transformed to be a two-way interactive communication mode. According to the characteristics of intelligent terminal APP, the principles and methods for museum information dissemination are based on APP have been explored, and the basic framework of Museum APP is based on user experiences has been established, which provides a useful exploration for promoting the image of museums in the digital age and carrying out public education and more effectively implementing the information dissemination.","PeriodicalId":231694,"journal":{"name":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2015-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131737137","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Customer is the basis of the property services enterprise, the competition of property services enterprise is the competition for grabbing customers. It is necessary to achieve the following objectives: to provide the right product or service at the right time, to satisfy the customer needs and desires. But the management of property services enterprise is found many kinds of problems. Though they pay close attention to collecting information on customers, but the actual work is not satisfactory. The paper research innovation based on the customer relationship management in the property service enterprise, through set the goal of implementation of the customer relationship management, positioning on services market, optimizing the service processes, to form all employees "customer-centric" business philosophy. The customer satisfaction and customer loyalty rely on quality of customer complaints handling, The ideas of CRM requires a complete understanding of property services enterprises throughout the customer life cycle, they must provide the platform to communicate with customers. Property services enterprise set up various office of customer service center is in the implementation of CRM strategies. Taking all kinds method to improve service efficiency, and ultimately achieving higher goals of customer satisfaction.
{"title":"The Research of the Property Service Enterprise's Innovation Based on the Customer Relationship Management Theory","authors":"Li Feng","doi":"10.1109/ICICTA.2015.257","DOIUrl":"https://doi.org/10.1109/ICICTA.2015.257","url":null,"abstract":"Customer is the basis of the property services enterprise, the competition of property services enterprise is the competition for grabbing customers. It is necessary to achieve the following objectives: to provide the right product or service at the right time, to satisfy the customer needs and desires. But the management of property services enterprise is found many kinds of problems. Though they pay close attention to collecting information on customers, but the actual work is not satisfactory. The paper research innovation based on the customer relationship management in the property service enterprise, through set the goal of implementation of the customer relationship management, positioning on services market, optimizing the service processes, to form all employees \"customer-centric\" business philosophy. The customer satisfaction and customer loyalty rely on quality of customer complaints handling, The ideas of CRM requires a complete understanding of property services enterprises throughout the customer life cycle, they must provide the platform to communicate with customers. Property services enterprise set up various office of customer service center is in the implementation of CRM strategies. Taking all kinds method to improve service efficiency, and ultimately achieving higher goals of customer satisfaction.","PeriodicalId":231694,"journal":{"name":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2015-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125206473","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Unsteadiness of surface quality and accidental vibration are serious problem in metallurgy saw blades cutting process that often lead to lots of waste products or causing tools damage. This paper, using ABAQUS software, develops an FEM model based on the orthogonal-cutting method to investigate the impact of milling parameters upon cutting process. Introducing to the Johnson-Cook thermal visco-plastic affects, the simulation results of the chip morphology and the stress state accord with that in real production. Simulation by varied parameters demonstrate the regularity of cutting force and cutting temperature for the change of cutting speed and cutting thickness of the cutter. And thus, suitable magnitude of cutting parameters are suggested.
{"title":"Finite Element Analysis of Milling Parameters for Metallurgy Saw Blade Cutting Process","authors":"Zhang Xianghong, Wang Huigang","doi":"10.1109/ICICTA.2015.278","DOIUrl":"https://doi.org/10.1109/ICICTA.2015.278","url":null,"abstract":"Unsteadiness of surface quality and accidental vibration are serious problem in metallurgy saw blades cutting process that often lead to lots of waste products or causing tools damage. This paper, using ABAQUS software, develops an FEM model based on the orthogonal-cutting method to investigate the impact of milling parameters upon cutting process. Introducing to the Johnson-Cook thermal visco-plastic affects, the simulation results of the chip morphology and the stress state accord with that in real production. Simulation by varied parameters demonstrate the regularity of cutting force and cutting temperature for the change of cutting speed and cutting thickness of the cutter. And thus, suitable magnitude of cutting parameters are suggested.","PeriodicalId":231694,"journal":{"name":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2015-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133094794","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This paper suggests a novel method named GA-LSSVM, combines genetic algorithms (GA) and least squares support vector machines (LS-SVM) techniques to provide a powerful model for improving the regression quality and to enhance the ability to extract characteristic information. Simultaneous differential pulse voltammetric multi-component determination of o-nitro phenol, m-nitro phenol and pnitrophenol was conducted for the first time by using the proposed method. The LS-SVM technique broadens the application of SVM by reducing the computational complexity since only the solution of a set of linear equations is required instead of a quadratic programming problem. Thus, LS-SVM has the capability of solving linear and nonlinear multivariate calibrations in a relatively fast way. Genetic algorithms (GA) introduced are probabilistic optimization techniques based on natural evolution and genetics and Darwin's theory of survival of the best. The GA-LS-SVM method is proven to be successful even when severe overlap of voltammograms existed.
{"title":"Analysis of Overlapping Voltammograms of Nitrophenols Combining Genetic Algorithms and Support Vector Machines","authors":"G. Ling, Ren Shou-xin","doi":"10.1109/ICICTA.2015.53","DOIUrl":"https://doi.org/10.1109/ICICTA.2015.53","url":null,"abstract":"This paper suggests a novel method named GA-LSSVM, combines genetic algorithms (GA) and least squares support vector machines (LS-SVM) techniques to provide a powerful model for improving the regression quality and to enhance the ability to extract characteristic information. Simultaneous differential pulse voltammetric multi-component determination of o-nitro phenol, m-nitro phenol and pnitrophenol was conducted for the first time by using the proposed method. The LS-SVM technique broadens the application of SVM by reducing the computational complexity since only the solution of a set of linear equations is required instead of a quadratic programming problem. Thus, LS-SVM has the capability of solving linear and nonlinear multivariate calibrations in a relatively fast way. Genetic algorithms (GA) introduced are probabilistic optimization techniques based on natural evolution and genetics and Darwin's theory of survival of the best. The GA-LS-SVM method is proven to be successful even when severe overlap of voltammograms existed.","PeriodicalId":231694,"journal":{"name":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2015-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133439264","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Taking Shihezi single tower cable-stayed bridge as the engineering background to establish finite element seismic model, using the nonlinear dynamic time history to get seismic analysis of the bridge under strong earthquake. In order to study the effect of damping constrained system on single tower cable-stayed bridge's seismic performance, this paper makes a contrastive analysis about the longitudinal, lateral different constrained system. In the longitudinal direction, we make a seismic calculation under the rare earthquake action while the single tower cable-stayed bridge respectively use different constrained system, such as rigid system, floating system, vertical supporting system, vertical support and elastic cable system, vertical support and viscous damper (FVD), etc, drawing the following conclusion: When using the movable support as the vertical bearing, friction resistance of the bearing can greatly improved the seismic performance of the structure, so its influence should be considered while calculating, the system that includes vertical support and the FVD is the optimal longitudinal seismic constrained system correspondingly. In the lateral direction, we respectively make a seismic calculation under the rare earthquake action while the pylons respectively use rigid system, floating system, transverse hinged, transverse free, vertical support and elastic cable, vertical support and viscous dampers (FVD) etc different constrained forms, transition pier respectively use transverse hinged, transverse free, lead rubber bearing, vertical support and viscous dampers (FVD) etc different constrained forms, drawing the following conclusions: If the force of transition pier stress has no conclusive effect on the design, the main tower with vertical support and viscous dampers while the transition pier with transverse hinged is the relatively optimal constrained system, If the force of transition pier stress has conclusive effect on the design, the main tower with vertical support and elastic cable while the transition pier with lead rubber bearings is the relatively optimal constrained system.
{"title":"Analysis about Seismic Constrained System of Single Tower Cable-Stayed Bridge","authors":"Jiang-Chonghu, Li-Dejian","doi":"10.1109/ICICTA.2015.49","DOIUrl":"https://doi.org/10.1109/ICICTA.2015.49","url":null,"abstract":"Taking Shihezi single tower cable-stayed bridge as the engineering background to establish finite element seismic model, using the nonlinear dynamic time history to get seismic analysis of the bridge under strong earthquake. In order to study the effect of damping constrained system on single tower cable-stayed bridge's seismic performance, this paper makes a contrastive analysis about the longitudinal, lateral different constrained system. In the longitudinal direction, we make a seismic calculation under the rare earthquake action while the single tower cable-stayed bridge respectively use different constrained system, such as rigid system, floating system, vertical supporting system, vertical support and elastic cable system, vertical support and viscous damper (FVD), etc, drawing the following conclusion: When using the movable support as the vertical bearing, friction resistance of the bearing can greatly improved the seismic performance of the structure, so its influence should be considered while calculating, the system that includes vertical support and the FVD is the optimal longitudinal seismic constrained system correspondingly. In the lateral direction, we respectively make a seismic calculation under the rare earthquake action while the pylons respectively use rigid system, floating system, transverse hinged, transverse free, vertical support and elastic cable, vertical support and viscous dampers (FVD) etc different constrained forms, transition pier respectively use transverse hinged, transverse free, lead rubber bearing, vertical support and viscous dampers (FVD) etc different constrained forms, drawing the following conclusions: If the force of transition pier stress has no conclusive effect on the design, the main tower with vertical support and viscous dampers while the transition pier with transverse hinged is the relatively optimal constrained system, If the force of transition pier stress has conclusive effect on the design, the main tower with vertical support and elastic cable while the transition pier with lead rubber bearings is the relatively optimal constrained system.","PeriodicalId":231694,"journal":{"name":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2015-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132140189","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
To resolve problems of knowledge resources sharing and utilization during network public opinion crisis management in Chinese government, based on requirements analysis, knowledge service procedure were introduced and the framework of knowledge service for government were constructed for government decision maker to easily get knowledge. The study can provide some inspiration for how to improve government's Knowledge Service.
{"title":"Research on Government Knowledge Service in China: Under the Background of Dealing with Network Opinion Crisis","authors":"Jing Zhou, Fuji Chen","doi":"10.1109/ICICTA.2015.182","DOIUrl":"https://doi.org/10.1109/ICICTA.2015.182","url":null,"abstract":"To resolve problems of knowledge resources sharing and utilization during network public opinion crisis management in Chinese government, based on requirements analysis, knowledge service procedure were introduced and the framework of knowledge service for government were constructed for government decision maker to easily get knowledge. The study can provide some inspiration for how to improve government's Knowledge Service.","PeriodicalId":231694,"journal":{"name":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2015-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114812485","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：