Pub Date : 2016-11-01DOI: 10.1109/ICSENST.2016.7796319
He Shuangshuang, Chen Xiyuan
Atomic spin gyroscope is a new kind of gyro based on quantum mechanics, with ultra-high precision, simple structure, small size, etc. Therefore, to study the characteristics of random drift for improving the accuracy of atomic spin gyro is significant. Firstly, through the analysis of the gyro static output data and preprocessing, the stationary time series gyro random error has obtained. Then established the gyro drift error model based on time series ARIMA, and test the applicability of the model through analysis of residual. Finally, through the establishment of the Kalman filter based on the model to filter out the gyro random drift, and the use of Allan variance analysis of the filtering results. The results show that the modeling and filtering method and can effectively reduce the atomic spin gyro random drift error, the angle random walk coefficient raised an order of magnitude compared with traditional ARMA modeling method, so as to effectively enhance the output accuracy of atomic spin gyro and stability of the system.
{"title":"Research on modeling and filtering method of atomic spin gyroscope's random drift","authors":"He Shuangshuang, Chen Xiyuan","doi":"10.1109/ICSENST.2016.7796319","DOIUrl":"https://doi.org/10.1109/ICSENST.2016.7796319","url":null,"abstract":"Atomic spin gyroscope is a new kind of gyro based on quantum mechanics, with ultra-high precision, simple structure, small size, etc. Therefore, to study the characteristics of random drift for improving the accuracy of atomic spin gyro is significant. Firstly, through the analysis of the gyro static output data and preprocessing, the stationary time series gyro random error has obtained. Then established the gyro drift error model based on time series ARIMA, and test the applicability of the model through analysis of residual. Finally, through the establishment of the Kalman filter based on the model to filter out the gyro random drift, and the use of Allan variance analysis of the filtering results. The results show that the modeling and filtering method and can effectively reduce the atomic spin gyro random drift error, the angle random walk coefficient raised an order of magnitude compared with traditional ARMA modeling method, so as to effectively enhance the output accuracy of atomic spin gyro and stability of the system.","PeriodicalId":297617,"journal":{"name":"2016 10th International Conference on Sensing Technology (ICST)","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122364879","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSENST.2016.7796323
J. Tong, C. Bian, S. Xia, Hailong Pi
In this paper, we present a novel and simple method to fabricate a continuous-flow concentrator based on ion concentration polarization phenomenon (ICP). With the capillary force, the Nafion solution can fill the Nafion resin channels, and nanoporous junctions were created to generate ICP. To demonstrate the concentration ability of the device, we conducted the experiments with Rhodamine 6G (positively charged) and fluorescein sodium (negatively charged). As a result, the device is more appropriate to concentrate the negatively charged species with concentration up to 2-fold. For further application, the method is convenient and simple to achieve a high-throughput concentration flow and a higher preconcentration factor.
{"title":"A continuous-flow concentrator based on ion concentration polarization","authors":"J. Tong, C. Bian, S. Xia, Hailong Pi","doi":"10.1109/ICSENST.2016.7796323","DOIUrl":"https://doi.org/10.1109/ICSENST.2016.7796323","url":null,"abstract":"In this paper, we present a novel and simple method to fabricate a continuous-flow concentrator based on ion concentration polarization phenomenon (ICP). With the capillary force, the Nafion solution can fill the Nafion resin channels, and nanoporous junctions were created to generate ICP. To demonstrate the concentration ability of the device, we conducted the experiments with Rhodamine 6G (positively charged) and fluorescein sodium (negatively charged). As a result, the device is more appropriate to concentrate the negatively charged species with concentration up to 2-fold. For further application, the method is convenient and simple to achieve a high-throughput concentration flow and a higher preconcentration factor.","PeriodicalId":297617,"journal":{"name":"2016 10th International Conference on Sensing Technology (ICST)","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115466657","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSENST.2016.7796275
Xiao Peng, Lin Wenshi, Feng Yejia, Cui Li
As an important signal source, chaotic circuit can play key blocks of Codec in fields of weak signal detection and high speed security communication and non-linear control. First we review the chaotic circuit design methodology into three kinds of methods like blocks stickiness with 3-blocks, decreasing-or increasing-type, for root cause of period three implying chaos. Then two new chaotic circuits are designed and demonstrated in core features of 1L-1C plus 1 multiplier and 1 operational amplifier, and 2L-3C plus 1T-MOSFET. The phase diagrams and FFT spectrums of tested independent variables show that new circuits are chaotic with the greatest Lyapunov's Exponents more than zero. At last our conclusions throw up both the birth of Lee's circuits under logic steps and deep thinking of precision measurements based on chaos in voltage-or current-mode.
{"title":"Chaotic circuit design methodology and case study","authors":"Xiao Peng, Lin Wenshi, Feng Yejia, Cui Li","doi":"10.1109/ICSENST.2016.7796275","DOIUrl":"https://doi.org/10.1109/ICSENST.2016.7796275","url":null,"abstract":"As an important signal source, chaotic circuit can play key blocks of Codec in fields of weak signal detection and high speed security communication and non-linear control. First we review the chaotic circuit design methodology into three kinds of methods like blocks stickiness with 3-blocks, decreasing-or increasing-type, for root cause of period three implying chaos. Then two new chaotic circuits are designed and demonstrated in core features of 1L-1C plus 1 multiplier and 1 operational amplifier, and 2L-3C plus 1T-MOSFET. The phase diagrams and FFT spectrums of tested independent variables show that new circuits are chaotic with the greatest Lyapunov's Exponents more than zero. At last our conclusions throw up both the birth of Lee's circuits under logic steps and deep thinking of precision measurements based on chaos in voltage-or current-mode.","PeriodicalId":297617,"journal":{"name":"2016 10th International Conference on Sensing Technology (ICST)","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130193636","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSENST.2016.7796248
X. Sui, Shuo Wang
In the producing process of absorbable suture, in order to solve the problem of suture diameter and the tensile strength are uneven, constant tension control system of absorbable suture is designed. Detection device using three rollers tension sensor whose sensitive element is the resistance strain gauge; Control device using programmable controller; Execution device using three-phase motor; Display device using we in view touch screen. Experiments show that the constant tension control system can control the controlled tension error in less than 0.1N. The system has good real-time performance and high reliability. The suture made by the constant tension control system is completely in line with the standard of the USP thirty-second edition of the collagen suture.
{"title":"Study on spinning process and constant tension control system of absorbable suture","authors":"X. Sui, Shuo Wang","doi":"10.1109/ICSENST.2016.7796248","DOIUrl":"https://doi.org/10.1109/ICSENST.2016.7796248","url":null,"abstract":"In the producing process of absorbable suture, in order to solve the problem of suture diameter and the tensile strength are uneven, constant tension control system of absorbable suture is designed. Detection device using three rollers tension sensor whose sensitive element is the resistance strain gauge; Control device using programmable controller; Execution device using three-phase motor; Display device using we in view touch screen. Experiments show that the constant tension control system can control the controlled tension error in less than 0.1N. The system has good real-time performance and high reliability. The suture made by the constant tension control system is completely in line with the standard of the USP thirty-second edition of the collagen suture.","PeriodicalId":297617,"journal":{"name":"2016 10th International Conference on Sensing Technology (ICST)","volume":"49 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128679407","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSENST.2016.7796261
A. Nag, S. Mukhopadhyay, J. Kosel
The paper presents the fabrication of transparent, flexible sensor patches developed using a casting technique with polydimethylsiloxane (PDMS) as substrate and a nanocomposite of carbon nanotubes (CNTs) and PDMS as interdigital electrodes. The electrodes act as strain sensitive capacitor. The prototypes were used as touch sensitive sensors attached to the limbs. Experiments results show the sensitivity of the patches towards tactile sensing. The results are very promising and can play a key role in the development of a cost efficient sensing system attached to prosthetic limbs.
{"title":"Transparent biocompatible sensor patches for touch sensitive prosthetic limbs","authors":"A. Nag, S. Mukhopadhyay, J. Kosel","doi":"10.1109/ICSENST.2016.7796261","DOIUrl":"https://doi.org/10.1109/ICSENST.2016.7796261","url":null,"abstract":"The paper presents the fabrication of transparent, flexible sensor patches developed using a casting technique with polydimethylsiloxane (PDMS) as substrate and a nanocomposite of carbon nanotubes (CNTs) and PDMS as interdigital electrodes. The electrodes act as strain sensitive capacitor. The prototypes were used as touch sensitive sensors attached to the limbs. Experiments results show the sensitivity of the patches towards tactile sensing. The results are very promising and can play a key role in the development of a cost efficient sensing system attached to prosthetic limbs.","PeriodicalId":297617,"journal":{"name":"2016 10th International Conference on Sensing Technology (ICST)","volume":"134 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131053804","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSENST.2016.7796263
Lin Wang, G. Cai, Juanjuan Shi, Weiguo Huang, Zhongkui Zhu
Localized faults on gears tend to result in periodic transient components under a constant speed operation. Extraction of such transient components is crucially important for gear fault diagnosis. Sparse decomposition based on matching pursuit (MP) is one of the effective methods to extract the weak feature contaminated by strong background noise and has been extensively used for transient feature extraction. In this paper, a practical and effective method is proposed for MP based sparse representation, which is enhanced in terms of sparse dictionary construction and computational complexity of MP. A special wavelet basis matching with the transients is developed to construct the sparse dictionary for fault vibration signal. The inner product operation in MP is replaced by cross-correlation implemented by fast Fourier transform (FFT) to address the problem of enormous computational complexity of MP algorithm. Simulation study shows that the transient feature can be effectively extracted and the computational efficiency is essentially improved by the proposed method. Application in transient components extraction of gearbox vibration signal from an automotive gearbox shows that the proposed method can extract the fault feature effectively.
{"title":"Sparse representation of transients based on improved matching pursuit algorithm for gear fault diagnosis","authors":"Lin Wang, G. Cai, Juanjuan Shi, Weiguo Huang, Zhongkui Zhu","doi":"10.1109/ICSENST.2016.7796263","DOIUrl":"https://doi.org/10.1109/ICSENST.2016.7796263","url":null,"abstract":"Localized faults on gears tend to result in periodic transient components under a constant speed operation. Extraction of such transient components is crucially important for gear fault diagnosis. Sparse decomposition based on matching pursuit (MP) is one of the effective methods to extract the weak feature contaminated by strong background noise and has been extensively used for transient feature extraction. In this paper, a practical and effective method is proposed for MP based sparse representation, which is enhanced in terms of sparse dictionary construction and computational complexity of MP. A special wavelet basis matching with the transients is developed to construct the sparse dictionary for fault vibration signal. The inner product operation in MP is replaced by cross-correlation implemented by fast Fourier transform (FFT) to address the problem of enormous computational complexity of MP algorithm. Simulation study shows that the transient feature can be effectively extracted and the computational efficiency is essentially improved by the proposed method. Application in transient components extraction of gearbox vibration signal from an automotive gearbox shows that the proposed method can extract the fault feature effectively.","PeriodicalId":297617,"journal":{"name":"2016 10th International Conference on Sensing Technology (ICST)","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124206679","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSENST.2016.7796331
Weigang Wen, Wei-dong Cheng
This paper presents a novel method for fault feature extraction of planetary gear using optimized matching pursuit algorithm, which is applied to vibration sensor signal feature extraction and fault diagnosis of planetary gearbox. This method combined optimization algorithm, planetary gearbox vibration model, and matching pursuit to implement planet gear fault characteristic extraction. Genetic algorithm and matching pursuit were integrated to decompose the vibration sensor signals into parameterized planetary gearbox model bases. Then the parameters of model bases were composited to extract fault feature of planetary gear. Different planet gear faults were tested for verifying the presented methods in different scenarios. All results of experiment analysis demonstrated its effectiveness and reliability.
{"title":"Fault feature extraction of planetary gear using an optimized matching pursuit decomposition","authors":"Weigang Wen, Wei-dong Cheng","doi":"10.1109/ICSENST.2016.7796331","DOIUrl":"https://doi.org/10.1109/ICSENST.2016.7796331","url":null,"abstract":"This paper presents a novel method for fault feature extraction of planetary gear using optimized matching pursuit algorithm, which is applied to vibration sensor signal feature extraction and fault diagnosis of planetary gearbox. This method combined optimization algorithm, planetary gearbox vibration model, and matching pursuit to implement planet gear fault characteristic extraction. Genetic algorithm and matching pursuit were integrated to decompose the vibration sensor signals into parameterized planetary gearbox model bases. Then the parameters of model bases were composited to extract fault feature of planetary gear. Different planet gear faults were tested for verifying the presented methods in different scenarios. All results of experiment analysis demonstrated its effectiveness and reliability.","PeriodicalId":297617,"journal":{"name":"2016 10th International Conference on Sensing Technology (ICST)","volume":"408 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132305799","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSENST.2016.7796217
Kexue Lai, Cancan Li, Tao He, Lang Chen, Kun Yu, Weisong Zhou
The fractal dimension, an important parameter as a measure of roughness of image, has been widely utilized to image classification, recognition and segmentation etc. Differential box-counting approach is widely applied to estimate fractal dimension in the calculation approaches of fractal dimension. However, this approach can not accurately calculate fractal dimension of image which have smaller gray level. In response to the issue, this paper proposes an improved differential box-counting method on the height h' of box. In order to verify the superiority of the improved algorithm, DBC, RDBC, SDBC and improved DBC are separately utilized to estimate fractal dimensions of random images with different gray levels and texture image with different sizes, and then to compare. Experimental results demonstrate that: improved differential box-counting approach is more stable for random images with different gray levels.
{"title":"Study on an improved differential box-counting approach for gray-level variation of images","authors":"Kexue Lai, Cancan Li, Tao He, Lang Chen, Kun Yu, Weisong Zhou","doi":"10.1109/ICSENST.2016.7796217","DOIUrl":"https://doi.org/10.1109/ICSENST.2016.7796217","url":null,"abstract":"The fractal dimension, an important parameter as a measure of roughness of image, has been widely utilized to image classification, recognition and segmentation etc. Differential box-counting approach is widely applied to estimate fractal dimension in the calculation approaches of fractal dimension. However, this approach can not accurately calculate fractal dimension of image which have smaller gray level. In response to the issue, this paper proposes an improved differential box-counting method on the height h' of box. In order to verify the superiority of the improved algorithm, DBC, RDBC, SDBC and improved DBC are separately utilized to estimate fractal dimensions of random images with different gray levels and texture image with different sizes, and then to compare. Experimental results demonstrate that: improved differential box-counting approach is more stable for random images with different gray levels.","PeriodicalId":297617,"journal":{"name":"2016 10th International Conference on Sensing Technology (ICST)","volume":"78 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133545670","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSENST.2016.7796281
L. Kun, T. Wei, Zhao Hui, Yang Jingjing
The grating eddy current sensor is based on the principle of lateral eddy current. Its precision is greatly influenced by the coil and reflector parameters. It is important to analyze and optimize those parameters so as to improve the precision. Therefore, it is necessary to make further research on how the sensor nonlinear error is influenced by parameters, such as reflector size, shape and coil turns, so that the sensor can be tuned for more high precision occasions. Models of the coil and reflector of the grating eddy current sensor are established with finite elements method (Maxwell software) in this paper. Reflectors with different size and shape and coils with different turns are simulated and calculated. The analytical results demonstrate that the coil turns should be as many as possible and reflector with semicircular on both sides is better. Besides, the optimal reflector length (the length corresponding to the smallest nonlinear error) has a linear relationship with coil width and length. The research has provided a guide to set reasonable parameters of coil and reflector to improve the precision.
{"title":"Analysis on parameters of grating eddy current displacement sensor","authors":"L. Kun, T. Wei, Zhao Hui, Yang Jingjing","doi":"10.1109/ICSENST.2016.7796281","DOIUrl":"https://doi.org/10.1109/ICSENST.2016.7796281","url":null,"abstract":"The grating eddy current sensor is based on the principle of lateral eddy current. Its precision is greatly influenced by the coil and reflector parameters. It is important to analyze and optimize those parameters so as to improve the precision. Therefore, it is necessary to make further research on how the sensor nonlinear error is influenced by parameters, such as reflector size, shape and coil turns, so that the sensor can be tuned for more high precision occasions. Models of the coil and reflector of the grating eddy current sensor are established with finite elements method (Maxwell software) in this paper. Reflectors with different size and shape and coils with different turns are simulated and calculated. The analytical results demonstrate that the coil turns should be as many as possible and reflector with semicircular on both sides is better. Besides, the optimal reflector length (the length corresponding to the smallest nonlinear error) has a linear relationship with coil width and length. The research has provided a guide to set reasonable parameters of coil and reflector to improve the precision.","PeriodicalId":297617,"journal":{"name":"2016 10th International Conference on Sensing Technology (ICST)","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127658776","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSENST.2016.7796308
Xiaorui Liu, Funjun Qi, Wangquan Ye, Zhiyu Song, R. Zheng
OUC-Raman (OUC, Ocean University of China) underwater detection system based on Raman-spectroscopy is designed to operate as instrument node in seafloor cabled observatory network. Considering requirement and standard of seafloor cabled observatory network, this article designs control system for OUC-Raman. It's composed of power management module and control module. Power management module ensures electronic character of OUC-Raman instrument node meeting standard of seafloor cabled observatory network, control module enables shore-based terminal to manipulate underwater system. This control system has redundancy structure to ensure its reliability in seafloor environment. Up to now, OUC-Raman instrument node has received multiple tests with satisfactory results.
{"title":"Design and reliability analysis for underwater control system in OUC-Raman instrument node of seafloor observatory network","authors":"Xiaorui Liu, Funjun Qi, Wangquan Ye, Zhiyu Song, R. Zheng","doi":"10.1109/ICSENST.2016.7796308","DOIUrl":"https://doi.org/10.1109/ICSENST.2016.7796308","url":null,"abstract":"OUC-Raman (OUC, Ocean University of China) underwater detection system based on Raman-spectroscopy is designed to operate as instrument node in seafloor cabled observatory network. Considering requirement and standard of seafloor cabled observatory network, this article designs control system for OUC-Raman. It's composed of power management module and control module. Power management module ensures electronic character of OUC-Raman instrument node meeting standard of seafloor cabled observatory network, control module enables shore-based terminal to manipulate underwater system. This control system has redundancy structure to ensure its reliability in seafloor environment. Up to now, OUC-Raman instrument node has received multiple tests with satisfactory results.","PeriodicalId":297617,"journal":{"name":"2016 10th International Conference on Sensing Technology (ICST)","volume":"235 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127663472","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：