Pub Date : 2023-01-01DOI: 10.21272/jes.2023.10(1).f1
V. Antonyuk, I. I. Bondarenko, S. P. Vislouh, O. Voloshko, M. Bondarenko
Theoretical studies of physical processes and phenomena in the zone of physical interaction of nanoinstruments with the surfaces of elements of microsystem technology are carried out in work. Based on the conducted research, mathematical models of energy heat exchange in the zone of physical contact of nanometric dimensions were compiled, and their analytical solution was obtained using the Fourier method of separation of variables and Goodman’s integral method. Simultaneously, the energy components of the processes in the nanocontact zone were considered. The numerical solution of the mathematical model of energy heat exchange in the zone of physical nanocontact was carried out using a software application based on the finite element method. The results were checked according to the equivalent thermal scheme to confirm the adequacy and accuracy of the obtained models. As a result, the mechanisms of energetic interaction of the nanoinstrument with the surfaces of the elements of microsystem technology devices were clarified. It is shown that the use of the proposed method of equivalent thermal circuits for the evaluation of mathematical models of the energy interaction of nanoinstruments with the surfaces of microsystem technology device elements, as well as the further study of the distribution of thermal fields in the nanocontact zone, differs from other numerical and analytical methods in terms of sufficient accuracy and speed of calculations. At the same time, it was established that the discrepancy between the results of mathematical modeling and the results obtained according to the equivalent thermal scheme does not exceed 5-8 %.
{"title":"Heat Exchange in a Contact Zone of Nanoinstrumentation\u0000with Elements of the Microsystem Technology","authors":"V. Antonyuk, I. I. Bondarenko, S. P. Vislouh, O. Voloshko, M. Bondarenko","doi":"10.21272/jes.2023.10(1).f1","DOIUrl":"https://doi.org/10.21272/jes.2023.10(1).f1","url":null,"abstract":"Theoretical studies of physical processes and phenomena in the zone of physical interaction of nanoinstruments with the surfaces of elements of microsystem technology are carried out in work. Based on the conducted research, mathematical models of energy heat exchange in the zone of physical contact of nanometric dimensions were compiled, and their analytical solution was obtained using the Fourier method of separation of variables and Goodman’s integral method. Simultaneously, the energy components of the processes in the nanocontact zone were considered. The numerical solution of the mathematical model of energy heat exchange in the zone of physical nanocontact was carried out using a software application based on the finite element method. The results were checked according to the equivalent thermal scheme to confirm the adequacy and accuracy of the obtained models. As a result, the mechanisms of energetic interaction of the nanoinstrument with the surfaces of the elements of microsystem technology devices were clarified. It is shown that the use of the proposed method of equivalent thermal circuits for the evaluation of mathematical models of the energy interaction of nanoinstruments with the surfaces of microsystem technology device elements, as well as the further study of the distribution of thermal fields in the nanocontact zone, differs from other numerical and analytical methods in terms of sufficient accuracy and speed of calculations. At the same time, it was established that the discrepancy between the results of mathematical modeling and the results obtained according to the equivalent thermal scheme does not exceed 5-8 %.","PeriodicalId":30589,"journal":{"name":"Tikrit Journal of Engineering Sciences","volume":"6 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"72753105","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.21272/jes.2023.10(1).c2
V. Kashytskyi, O. Sadova, M. Melnychuk, G. Golodyuk, O. B. Klymovets
A comparative evaluation of the structuring processes of the epoxy polymer system with epoxy polymers modified with polyvinyl chloride solution and epoxy composites filled with finely dispersed titanium oxide powder was carried out. Analysis of the infrared (IR) absorption spectra of the studied epoxy polymer and epoxy composite materials showed the presence of deformation and valence vibrations of certain groups of atoms. The oscillations of groups of atoms with double bonds and regions of existence of triple bonds were also revealed. In the region of high frequencies, absorption bands correspond to valence vibrations of groups containing a hydrogen atom. The presence of triple bonds in the epoxy polymer system was determined, indicating unreacted functional groups. This fact corresponds to the low content of the gel fraction of unmodified epoxy polymers after heat treatment and indicates the formation of a system with insufficient chemical bonds. The absorption bands of the epoxy composite material filled with titanium oxide powder are characterized by a lower optical density and a larger peak area compared to the bands of the unmodified epoxy polymer, which indicates the formation of a higher number of crosslinking nodes of the epoxy composite material. The introduction of polyvinyl chloride into the composition of the epoxy polymer system increases the degree of structuring of epoxy polymers. However, a smaller number of formed chemical bonds of the modified epoxy polymer was recorded compared to epoxy composites containing titanium oxide particles. The highest degree of structuring is provided in polyvinyl chloride-modified epoxy composites containing titanium oxide powder due to intensive structuring and formation of double and triple bonds.
{"title":"Structuring of Modified Epoxy Composite Materials by Infrared Spectroscopy","authors":"V. Kashytskyi, O. Sadova, M. Melnychuk, G. Golodyuk, O. B. Klymovets","doi":"10.21272/jes.2023.10(1).c2","DOIUrl":"https://doi.org/10.21272/jes.2023.10(1).c2","url":null,"abstract":"A comparative evaluation of the structuring processes of the epoxy polymer system with epoxy polymers modified with polyvinyl chloride solution and epoxy composites filled with finely dispersed titanium oxide powder was carried out. Analysis of the infrared (IR) absorption spectra of the studied epoxy polymer and epoxy composite materials showed the presence of deformation and valence vibrations of certain groups of atoms. The oscillations of groups of atoms with double bonds and regions of existence of triple bonds were also revealed. In the region of high frequencies, absorption bands correspond to valence vibrations of groups containing a hydrogen atom. The presence of triple bonds in the epoxy polymer system was determined, indicating unreacted functional groups. This fact corresponds to the low content of the gel fraction of unmodified epoxy polymers after heat treatment and indicates the formation of a system with insufficient chemical bonds. The absorption bands of the epoxy composite material filled with titanium oxide powder are characterized by a lower optical density and a larger peak area compared to the bands of the unmodified epoxy polymer, which indicates the formation of a higher number of crosslinking nodes of the epoxy composite material. The introduction of polyvinyl chloride into the composition of the epoxy polymer system increases the degree of structuring of epoxy polymers. However, a smaller number of formed chemical bonds of the modified epoxy polymer was recorded compared to epoxy composites containing titanium oxide particles. The highest degree of structuring is provided in polyvinyl chloride-modified epoxy composites containing titanium oxide powder due to intensive structuring and formation of double and triple bonds.","PeriodicalId":30589,"journal":{"name":"Tikrit Journal of Engineering Sciences","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86483917","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.21272/jes.2023.10(1).d2
A. Voropay, O. Menshykov, S. Povaliaiev, A. Sharapata, P. Yehorov
Non-stationary loading of a mechanical system consisting of a hinged beam and additional support installed in the beam span was studied using a model of the beam deformation based on the Timoshenko hypothesis with considering rotatory inertia and shear. The system of partial differential equations describing the beam deformation was solved by expanding the unknown functions in the Fourier series with subsequent application of the integral Laplace transform. The additional support was assumed to be realistic rather than rigid. Thus it has linearly elastic, viscous, and inertial components. This means that the effect of a part of the support vibrating with the beam was considered such that their displacements coincide. The beam and additional support reaction were replaced by an unknown concentrated external force applied to the beam. This unknown reaction was assumed to be time-dependent. The time law was determined by solving the first kind of Volterra integral equation. The methodology of deriving the integral equation for the unknown reaction was explained. Analytic formulae and results of computations for specific numerical parameters were given. The impact of the mass value on the additional viscoelastic support reaction and the beam deflection at arbitrary points were determined. The research results of this paper can be helpful for engineers in designing multi-span bridges.
{"title":"Modeling a Viscoelastic Support Considering Its Mass-Inertial Characteristics During Non-Stationary Vibrations of the Beam","authors":"A. Voropay, O. Menshykov, S. Povaliaiev, A. Sharapata, P. Yehorov","doi":"10.21272/jes.2023.10(1).d2","DOIUrl":"https://doi.org/10.21272/jes.2023.10(1).d2","url":null,"abstract":"Non-stationary loading of a mechanical system consisting of a hinged beam and additional support installed in the beam span was studied using a model of the beam deformation based on the Timoshenko hypothesis with considering rotatory inertia and shear. The system of partial differential equations describing the beam deformation was solved by expanding the unknown functions in the Fourier series with subsequent application of the integral Laplace transform. The additional support was assumed to be realistic rather than rigid. Thus it has linearly elastic, viscous, and inertial components. This means that the effect of a part of the support vibrating with the beam was considered such that their displacements coincide. The beam and additional support reaction were replaced by an unknown concentrated external force applied to the beam. This unknown reaction was assumed to be time-dependent. The time law was determined by solving the first kind of Volterra integral equation. The methodology of deriving the integral equation for the unknown reaction was explained. Analytic formulae and results of computations for specific numerical parameters were given. The impact of the mass value on the additional viscoelastic support reaction and the beam deflection at arbitrary points were determined. The research results of this paper can be helpful for engineers in designing multi-span bridges.","PeriodicalId":30589,"journal":{"name":"Tikrit Journal of Engineering Sciences","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90204576","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.21272/jes.2023.10(1).b1
I. V. Prokopovych, A. B. Kokhanov, V. M. Khamitov, V. Tikhenko, P. Dašić
Standardization is essential for innovation (on the impacts on design, manufacturing, and operation processes) and its dissemination, both within a country and internationally. A phenomenological information model has been developed for the system of standards, which will be used as an information base for integrated quality management systems, environmental safety, and energy saving depending on the type of products, requirements of technical regulations, and conformity assessment procedures. Phase portraits of the life cycle system of complex products were constructed, and a general expression for the Lyapunov exponents characterizing the overall behavior of the dynamic system in phase space was obtained. The presence of particular areas to which, regardless of the initial conditions, all phase trajectories rapidly evolve has been established. The critical conditions for the control parameters were found. A diagram was constructed that determines the stability of the system states of the life cycle of complex products. It was found that the processes of the life cycle of complex products are carried out in two stages: in the first, there is a rapid evolution of components and parameters of technical and software tools, as well as energetic elements of functional subsystems, which is reflected in a specific attractive section of phase portraits, in the second, further slow development along it.
{"title":"Standardizing Life Cycle Organization: A Synergetic Quality Management Approach","authors":"I. V. Prokopovych, A. B. Kokhanov, V. M. Khamitov, V. Tikhenko, P. Dašić","doi":"10.21272/jes.2023.10(1).b1","DOIUrl":"https://doi.org/10.21272/jes.2023.10(1).b1","url":null,"abstract":"Standardization is essential for innovation (on the impacts on design, manufacturing, and operation processes) and its dissemination, both within a country and internationally. A phenomenological information model has been developed for the system of standards, which will be used as an information base for integrated quality management systems, environmental safety, and energy saving depending on the type of products, requirements of technical regulations, and conformity assessment procedures. Phase portraits of the life cycle system of complex products were constructed, and a general expression for the Lyapunov exponents characterizing the overall behavior of the dynamic system in phase space was obtained. The presence of particular areas to which, regardless of the initial conditions, all phase trajectories rapidly evolve has been established. The critical conditions for the control parameters were found. A diagram was constructed that determines the stability of the system states of the life cycle of complex products. It was found that the processes of the life cycle of complex products are carried out in two stages: in the first, there is a rapid evolution of components and parameters of technical and software tools, as well as energetic elements of functional subsystems, which is reflected in a specific attractive section of phase portraits, in the second, further slow development along it.","PeriodicalId":30589,"journal":{"name":"Tikrit Journal of Engineering Sciences","volume":"28 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80022614","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.21272/jes.2023.10(1).d3
A. Lymarenko, V. Kurgan, A. Bazhanova, V. Khamray, A. Ponomarenko, I. Karabegović
The article deals with modeling and calculations of volumetric machine-building structures with complex geometry. The relevance of the work lies in the fact that its methodology and results can help design massive structural elements complex in shape, including cylinders of powerful hydraulic presses. Attention is paid to the problems of reducing the metal content of machine-building products and the safe conditions of their operation. Theoretical and applied work is based on numerical methods using analytical solutions to assess the reliability of computer calculation results. The choice of research method is because analytical solutions for massive parts of such a configuration are too complex for numerical implementation. Experimental methods are too expensive and not so universal as to sort out possible variants of shapes and sizes. For the actual model of the press, the capabilities of the finite element method implemented in the ANSYS multipurpose complex were selected and rationally used. The results of the calculations are summarized in the table and shown on the graphs of the stress distribution. Based on the performed calculations (with a reliability check based on the formulas of the theory of elasticity for simplified calculation schemes), conclusions were made to ensure a more even distribution of stresses and a reduction in the metal content of the product.
{"title":"The Stress State of a Thick-Walled Hydraulic Press Cylinder with\u0000Concentrators","authors":"A. Lymarenko, V. Kurgan, A. Bazhanova, V. Khamray, A. Ponomarenko, I. Karabegović","doi":"10.21272/jes.2023.10(1).d3","DOIUrl":"https://doi.org/10.21272/jes.2023.10(1).d3","url":null,"abstract":"The article deals with modeling and calculations of volumetric machine-building structures with complex geometry. The relevance of the work lies in the fact that its methodology and results can help design massive structural elements complex in shape, including cylinders of powerful hydraulic presses. Attention is paid to the problems of reducing the metal content of machine-building products and the safe conditions of their operation. Theoretical and applied work is based on numerical methods using analytical solutions to assess the reliability of computer calculation results. The choice of research method is because analytical solutions for massive parts of such a configuration are too complex for numerical implementation. Experimental methods are too expensive and not so universal as to sort out possible variants of shapes and sizes. For the actual model of the press, the capabilities of the finite element method implemented in the ANSYS multipurpose complex were selected and rationally used. The results of the calculations are summarized in the table and shown on the graphs of the stress distribution. Based on the performed calculations (with a reliability check based on the formulas of the theory of elasticity for simplified calculation schemes), conclusions were made to ensure a more even distribution of stresses and a reduction in the metal content of the product.","PeriodicalId":30589,"journal":{"name":"Tikrit Journal of Engineering Sciences","volume":"63 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78733382","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.21272/jes.2023.10(1).a2
O. Zaleta, O. Povstyanoy, L. F. Ribeiro, R. Redko, T. Y. Bozhko, T. Chetverzhuk
Technological equipment design based on functionally modular methods is widely used in various technical fields. The designed object can be a technological machine, a production line, or a manufacturing complex. Special attention is paid to the optimization of its structure. The sequence of performing all stages of the optimization synthesis problem is presented in the article. To find a solution to this task, the developer should apply the complete or directed search of acceptable structure options and determine the best one using some optimization criteria to evaluate their quality. It can be simple enough if the designed technical system structure consists of no more than several elements. For example, if the number of alternative elements options is several dozen, it takes much time to accomplish the search correctly. Thus, the greater the number of components considered, the more difficult it is to do all the necessary calculations manually. In this case, machine resources should be involved. This scientific work aims to identify procedures of optimization synthesis that can be automated. Also, appropriate software has to be developed. Our computer program is based on the algorithm of a complete search of all options of the technical system structure. It can process an extensive array of input data and produce all possible and logically permissible results in the form the designer can analyze using the Pareto method to choose the best one. This software can be used for any technical system with a modular structure.
{"title":"Automation of Optimization Synthesis for Modular Technological\u0000Equipment","authors":"O. Zaleta, O. Povstyanoy, L. F. Ribeiro, R. Redko, T. Y. Bozhko, T. Chetverzhuk","doi":"10.21272/jes.2023.10(1).a2","DOIUrl":"https://doi.org/10.21272/jes.2023.10(1).a2","url":null,"abstract":"Technological equipment design based on functionally modular methods is widely used in various technical fields. The designed object can be a technological machine, a production line, or a manufacturing complex. Special attention is paid to the optimization of its structure. The sequence of performing all stages of the optimization synthesis problem is presented in the article. To find a solution to this task, the developer should apply the complete or directed search of acceptable structure options and determine the best one using some optimization criteria to evaluate their quality. It can be simple enough if the designed technical system structure consists of no more than several elements. For example, if the number of alternative elements options is several dozen, it takes much time to accomplish the search correctly. Thus, the greater the number of components considered, the more difficult it is to do all the necessary calculations manually. In this case, machine resources should be involved. This scientific work aims to identify procedures of optimization synthesis that can be automated. Also, appropriate software has to be developed. Our computer program is based on the algorithm of a complete search of all options of the technical system structure. It can process an extensive array of input data and produce all possible and logically permissible results in the form the designer can analyze using the Pareto method to choose the best one. This software can be used for any technical system with a modular structure.","PeriodicalId":30589,"journal":{"name":"Tikrit Journal of Engineering Sciences","volume":"27 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80847809","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.21272/jes.2023.10(1).h1
T. Javanbakht
This paper applies a novel automated decision-making process with TOPSIS to analyze ions and organic materials in drinking water. The hypothesis was that the modified TOPSIS algorithm with the Łukasiewicz fuzzy disjunction would be appropriate to optimize the drinking water samples. The maximum output values were set to one to apply the fuzzy disjunction. The concentrations of ions and organic materials in the drinking water samples were considered from the values for naturally occurring chemicals that would be of health significance. Materials with positive effects on the body were considered profit criteria, whereas other ones with negative impacts on human health were considered cost criteria. The analysis of samples with unmodified TOPSIS showed that profit criteria having high concentrations and cost criteria having low concentrations had the dominant effects on the candidates’ ranking. The modified TOPSIS showed that the candidates’ ranking in the second analysis series was the same as in the first. However, the value of 1.0 for the fourth candidate’s concentration of nitrite, which resulted from the fuzzy disjunction in the algorithm of the modified TOPSIS, was attributed to the confusion of the drinking water and undrinkable water categories. The optimization results for drinking water samples could be applied in science and engineering based on the concentrations of their ions and organic materials with the automated decision-making process for their distinction from undrinkable water.
{"title":"A Novel Automated Decision-Making Process for Analysis\u0000of Ions and Organic Materials in Drinking Water","authors":"T. Javanbakht","doi":"10.21272/jes.2023.10(1).h1","DOIUrl":"https://doi.org/10.21272/jes.2023.10(1).h1","url":null,"abstract":"This paper applies a novel automated decision-making process with TOPSIS to analyze ions and organic materials in drinking water. The hypothesis was that the modified TOPSIS algorithm with the Łukasiewicz fuzzy disjunction would be appropriate to optimize the drinking water samples. The maximum output values were set to one to apply the fuzzy disjunction. The concentrations of ions and organic materials in the drinking water samples were considered from the values for naturally occurring chemicals that would be of health significance. Materials with positive effects on the body were considered profit criteria, whereas other ones with negative impacts on human health were considered cost criteria. The analysis of samples with unmodified TOPSIS showed that profit criteria having high concentrations and cost criteria having low concentrations had the dominant effects on the candidates’ ranking. The modified TOPSIS showed that the candidates’ ranking in the second analysis series was the same as in the first. However, the value of 1.0 for the fourth candidate’s concentration of nitrite, which resulted from the fuzzy disjunction in the algorithm of the modified TOPSIS, was attributed to the confusion of the drinking water and undrinkable water categories. The optimization results for drinking water samples could be applied in science and engineering based on the concentrations of their ions and organic materials with the automated decision-making process for their distinction from undrinkable water.","PeriodicalId":30589,"journal":{"name":"Tikrit Journal of Engineering Sciences","volume":"9 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88279116","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.21272/jes.2023.10(1).g2
Serhii Sokolov
The most critical parameters of the microclimate in greenhouses are air and soil temperature, air and soil moisture, plant illumination, and carbon dioxide (CO2) concentration in photosynthesis. New energy sources and resource-efficient management of microclimate parameters in greenhouses can be utilized to reduce greenhouse crop cultivation costs and increase profits. As the plant mass increase depends on photosynthesis, which involves the formation of glucose in the plant chloroplasts from water and carbon dioxide under the influence of light radiation, the saturation of greenhouses with carbon dioxide has become popular in recent decades. However, insufficient light slows down the process of glucose formation, while excessive light intensity negatively affects photosynthesis. Based on the experimentally proven Van Henten model of plant growth and using the MATLAB environment, a methodology was proposed, and the dependence between CO2 concentration and leaf lettuce illumination power required for maximum photosynthesis was determined. It is equal to 0.57 ppm/(W/m2). Such dependence should be considered when designing control systems to reduce resource and energy costs for greenhouse crop cultivation while ensuring maximum yield.
{"title":"Optimization of Greenhouse Microclimate Parameters\u0000Considering the Impact of CO2 and Light","authors":"Serhii Sokolov","doi":"10.21272/jes.2023.10(1).g2","DOIUrl":"https://doi.org/10.21272/jes.2023.10(1).g2","url":null,"abstract":"The most critical parameters of the microclimate in greenhouses are air and soil temperature, air and soil moisture, plant illumination, and carbon dioxide (CO2) concentration in photosynthesis. New energy sources and resource-efficient management of microclimate parameters in greenhouses can be utilized to reduce greenhouse crop cultivation costs and increase profits. As the plant mass increase depends on photosynthesis, which involves the formation of glucose in the plant chloroplasts from water and carbon dioxide under the influence of light radiation, the saturation of greenhouses with carbon dioxide has become popular in recent decades. However, insufficient light slows down the process of glucose formation, while excessive light intensity negatively affects photosynthesis. Based on the experimentally proven Van Henten model of plant growth and using the MATLAB environment, a methodology was proposed, and the dependence between CO2 concentration and leaf lettuce illumination power required for maximum photosynthesis was determined. It is equal to 0.57 ppm/(W/m2). Such dependence should be considered when designing control systems to reduce resource and energy costs for greenhouse crop cultivation while ensuring maximum yield.","PeriodicalId":30589,"journal":{"name":"Tikrit Journal of Engineering Sciences","volume":"5 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80432278","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.21272/jes.2023.10(1).a4
T. N. Halchuk, O. Povstyanoy, M. Bembenek, R. Redko, T. Chetverzhuk, R. Polinkevych
The article shows the influence of the technological system of an automated lathe, in particular cam chucks, on the accuracy of machining bearing rings for production conditions. The value of the deformation during machining, i.e., the non-circularity of the ring of a single row tapered roller bearing 32017X in outer diameter, was investigated. For the study, samples were selected that were processed under the same conditions directly in the production unit of PJSC “SKF Ukraine” without interference with the technological process. The use of replaceable floating cams in the chuck design was proposed to increase the accuracy and productivity of machining. Experimental studies have shown that the machined surface’s ovality depends on the chuck cams’ clamping force. The effectiveness of computer processing of statistical data on the accuracy control of engineering products was shown. Implementing machining accuracy control in production using the Minitab computer program was presented. It was proven that the quality of products is formed under the influence of the use of modern computer technologies at all stages of manufacturing and control of parts, which ensures research in a wide range of changes in technological parameters and comparison of individual studies with actual machining conditions on the machine, with the results of a sufficient level of reliability.
{"title":"Impact of Technological System’s Characteristics on the\u0000Machining Accuracy of Bearing Rings","authors":"T. N. Halchuk, O. Povstyanoy, M. Bembenek, R. Redko, T. Chetverzhuk, R. Polinkevych","doi":"10.21272/jes.2023.10(1).a4","DOIUrl":"https://doi.org/10.21272/jes.2023.10(1).a4","url":null,"abstract":"The article shows the influence of the technological system of an automated lathe, in particular cam chucks, on the accuracy of machining bearing rings for production conditions. The value of the deformation during machining, i.e., the non-circularity of the ring of a single row tapered roller bearing 32017X in outer diameter, was investigated. For the study, samples were selected that were processed under the same conditions directly in the production unit of PJSC “SKF Ukraine” without interference with the technological process. The use of replaceable floating cams in the chuck design was proposed to increase the accuracy and productivity of machining. Experimental studies have shown that the machined surface’s ovality depends on the chuck cams’ clamping force. The effectiveness of computer processing of statistical data on the accuracy control of engineering products was shown. Implementing machining accuracy control in production using the Minitab computer program was presented. It was proven that the quality of products is formed under the influence of the use of modern computer technologies at all stages of manufacturing and control of parts, which ensures research in a wide range of changes in technological parameters and comparison of individual studies with actual machining conditions on the machine, with the results of a sufficient level of reliability.","PeriodicalId":30589,"journal":{"name":"Tikrit Journal of Engineering Sciences","volume":"2 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82544371","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-01DOI: 10.21272/jes.2023.10(1).a1
O. Sokolov, Aleksander Hosovsky, V. Ivanov, I. Pavlenko
Recent advancements in soft pneumatic robot research have demonstrated these robots’ capability to interact with the environment and humans in various ways. Their ability to move over rough terrain and grasp objects of irregular shape, regardless of position, has garnered significant interest in developing new pneumatic soft robots. Integrating industrial design with related technologies holds great promise for the future, potentially bringing about a new lifestyle and revolutionizing the industry. As robots become increasingly practical, there is a growing need for sensitivity, robustness, and efficiency improvements. It is anticipated that the development of these intelligent pneumatic soft robots will play a critical role in serving the needs of society and production shortly. The present article is concerned with developing a system for monitoring a pneumatic robot’s parameters, including a spatial coordinate system. The focus is on utilizing the relationship between the coordinates and pressure to model the movement of the soft robot within the MATLAB simulation environment.
{"title":"Movement Monitoring System for a Pneumatic Muscle\u0000Actuator","authors":"O. Sokolov, Aleksander Hosovsky, V. Ivanov, I. Pavlenko","doi":"10.21272/jes.2023.10(1).a1","DOIUrl":"https://doi.org/10.21272/jes.2023.10(1).a1","url":null,"abstract":"Recent advancements in soft pneumatic robot research have demonstrated these robots’ capability to interact with the environment and humans in various ways. Their ability to move over rough terrain and grasp objects of irregular shape, regardless of position, has garnered significant interest in developing new pneumatic soft robots. Integrating industrial design with related technologies holds great promise for the future, potentially bringing about a new lifestyle and revolutionizing the industry. As robots become increasingly practical, there is a growing need for sensitivity, robustness, and efficiency improvements. It is anticipated that the development of these intelligent pneumatic soft robots will play a critical role in serving the needs of society and production shortly. The present article is concerned with developing a system for monitoring a pneumatic robot’s parameters, including a spatial coordinate system. The focus is on utilizing the relationship between the coordinates and pressure to model the movement of the soft robot within the MATLAB simulation environment.","PeriodicalId":30589,"journal":{"name":"Tikrit Journal of Engineering Sciences","volume":"55 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85592988","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：