Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939925
Luis F. Gutiérrez Marcantoni, Sergio A. Elaskar, José P. Tamagno
En este trabajo se emplea el solver rhoCentralFoam incluido en la librería de acceso libre OpenFOAM para el modelado y simulación de la propagación de ondas de choque y su interacción con paredes sólidas cóncavas. Se desea estudiar el fenómeno inestacionario correspondiente a la reflexión de ondas de choque en paredes reflectantes curvas. Este tipo de reflexiónes, por su carácter inestacionario, posee tres variables independientes (x, y, t) y son fenómenos más complejos que aquellos generados en flujos estacionarios o pseudo-estacionarios que dependen de dos variables independientes. Los resultados numéricos obtenidos capturan adecuadamente las estructuras de ondas que se producen durante la reflexión, así como sus transiciones.
在此基础上，提出了一种方法，利用开放存取库OpenFOAM中的rhoCentralFoam求解器来建模和仿真冲击波的传播及其与凹实壁的相互作用。我们希望研究与激波在弯曲反射壁上反射有关的不稳定现象。这种类型的反射，由于其非稳态特性，有三个自变量(x, y, t)，比那些在稳态或伪稳态流中产生的现象更复杂，后者依赖于两个自变量。在本研究中，我们分析了在反射过程中发生的波结构及其跃迁。
{"title":"Simulación mediante OpenFOAM de la reflexión de ondas de choque en superficies sólidas curvas","authors":"Luis F. Gutiérrez Marcantoni, Sergio A. Elaskar, José P. Tamagno","doi":"10.1109/ARGENCON55245.2022.9939925","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939925","url":null,"abstract":"En este trabajo se emplea el solver rhoCentralFoam incluido en la librería de acceso libre OpenFOAM para el modelado y simulación de la propagación de ondas de choque y su interacción con paredes sólidas cóncavas. Se desea estudiar el fenómeno inestacionario correspondiente a la reflexión de ondas de choque en paredes reflectantes curvas. Este tipo de reflexiónes, por su carácter inestacionario, posee tres variables independientes (x, y, t) y son fenómenos más complejos que aquellos generados en flujos estacionarios o pseudo-estacionarios que dependen de dos variables independientes. Los resultados numéricos obtenidos capturan adecuadamente las estructuras de ondas que se producen durante la reflexión, así como sus transiciones.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"126 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116347621","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9940113
Carlos G Catuogno, G. Catuogno, Jonathan E. Bosso, Guillermo O. García
Este trabajo propone el desarrollo de un sistema automático de seguimiento de antena para un vehículo aéreo no tripulado (UAV). Este sistema, en acción conjunta con el uso de antenas direccionales, permite aumentar el rango de comunicación (video y telemetría) entre el UAV y su estación de monitoreo en tierra. Los resultados experimentales permiten corroborar el correcto funcionamiento del sistema de seguimiento y los enlaces de comunicación.
{"title":"Sistema de seguimiento de antena para UAV","authors":"Carlos G Catuogno, G. Catuogno, Jonathan E. Bosso, Guillermo O. García","doi":"10.1109/ARGENCON55245.2022.9940113","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9940113","url":null,"abstract":"Este trabajo propone el desarrollo de un sistema automático de seguimiento de antena para un vehículo aéreo no tripulado (UAV). Este sistema, en acción conjunta con el uso de antenas direccionales, permite aumentar el rango de comunicación (video y telemetría) entre el UAV y su estación de monitoreo en tierra. Los resultados experimentales permiten corroborar el correcto funcionamiento del sistema de seguimiento y los enlaces de comunicación.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"77 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121665897","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939752
R. Medina, C. Galarza, W. Rojas, J. Gutiérrez, Willam Gutiérrez, D. Macas, Diego Morales
According to Standard ISO 55000, the risk index is a key performance indicator for physical asset management. This paper presents a proposal for assessing Distribution Transformers Risk Index For that purpose authors propose input variables such as age, load factor, rated power, and distance between units. Then the methodology was applied in a park of 100 units corresponding to the feeder "Celi-Román" of the Empresa Eléctrica Regional del Sur S.A., the results were analyzed.
根据ISO 55000标准，风险指数是实物资产管理的关键绩效指标。本文提出了一种评估配电变压器风险指数的建议，为此作者提出了输入变量，如年龄、负载系数、额定功率和单元间距离。然后将该方法应用于与Empresa elsamicica Regional del Sur sa的馈线“Celi-Román”对应的100个单位的公园，并对结果进行了分析。
{"title":"Evaluación del Índice de Riesgo de Transformadores de Distribución Mediante Técnicas de Lógica Difusa","authors":"R. Medina, C. Galarza, W. Rojas, J. Gutiérrez, Willam Gutiérrez, D. Macas, Diego Morales","doi":"10.1109/ARGENCON55245.2022.9939752","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939752","url":null,"abstract":"According to Standard ISO 55000, the risk index is a key performance indicator for physical asset management. This paper presents a proposal for assessing Distribution Transformers Risk Index For that purpose authors propose input variables such as age, load factor, rated power, and distance between units. Then the methodology was applied in a park of 100 units corresponding to the feeder \"Celi-Román\" of the Empresa Eléctrica Regional del Sur S.A., the results were analyzed.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"69 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125617922","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9940045
G. Merletti, Andrés Altieri
In the development of microwave systems it is important to be able to characterize devices and components in isolation with the least error possible. In this context, TRL (Through-Reflect-Line) calibration techniques are a versatile tool which allows to extract the S parameters of a two-port network minimizing the parasitic effects of measurement circuitry and device mounting. This work presents the design, simulation and measurement of a TRL calibration kit implemented using microstrip lines in a low-cost FR4 substrate. The designed kit is used to extract the S parameters of a capacitor, comparing the simulations with the obtained measurements.
{"title":"Diseño, simulación y caracterización de un kit decalibración TRL","authors":"G. Merletti, Andrés Altieri","doi":"10.1109/ARGENCON55245.2022.9940045","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9940045","url":null,"abstract":"In the development of microwave systems it is important to be able to characterize devices and components in isolation with the least error possible. In this context, TRL (Through-Reflect-Line) calibration techniques are a versatile tool which allows to extract the S parameters of a two-port network minimizing the parasitic effects of measurement circuitry and device mounting. This work presents the design, simulation and measurement of a TRL calibration kit implemented using microstrip lines in a low-cost FR4 substrate. The designed kit is used to extract the S parameters of a capacitor, comparing the simulations with the obtained measurements.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132131379","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939875
Efraín Ibaceta, Alexander Rojas Aceituno, Vicente Faúndez Palominos, D. Carrasco, Emilio Contreras Boulet, M. Díaz
Modular Multilevel Converters are being widely used in high-power applications such as High-Voltage Direct Current transmission due to the main advantages of scalability, modular configuration and high-quality power. For industrial applications, hundreds of power cells have to be connected in a cascade to reach high-power ratios. However, most of the current academic research is validated using prototypes equipped with a low number of power cells. Consequently, this paper presents the testing and start-up procedure of 60 power cells Modular Multilevel Converter test-bench based on an OPAL-RT real-time controller and power stage. Partial experimental results are presented.
{"title":"Experimental Assessment of a Modular Multilevel Converter using OPAL-RT Control and Power Stages","authors":"Efraín Ibaceta, Alexander Rojas Aceituno, Vicente Faúndez Palominos, D. Carrasco, Emilio Contreras Boulet, M. Díaz","doi":"10.1109/ARGENCON55245.2022.9939875","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939875","url":null,"abstract":"Modular Multilevel Converters are being widely used in high-power applications such as High-Voltage Direct Current transmission due to the main advantages of scalability, modular configuration and high-quality power. For industrial applications, hundreds of power cells have to be connected in a cascade to reach high-power ratios. However, most of the current academic research is validated using prototypes equipped with a low number of power cells. Consequently, this paper presents the testing and start-up procedure of 60 power cells Modular Multilevel Converter test-bench based on an OPAL-RT real-time controller and power stage. Partial experimental results are presented.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"42 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134315283","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939939
Felipe Cinto, M. Nacusse, H. Haimovich
The double pendulum is the main mechanical structure on which simple biped robots with compass-like gait are based. Although being very energy efficient, the compass-like gait bears the inherent problems of forcing the swing-leg tip to below-ground position while walking and allowing for almost no terrain irregularities. In this paper, an underactuated biped based on the double pendulum is made to walk via swinging the leg in the direction opposite to that of the compass-like gait. Actuation torque on the stance foot is required to change signs during leg swing in order for the pre- and post-impact states to allow for stable limit-cycle walking. This sign-changing torque is implemented by means of a simple control strategy that generates a whip-like gait and allows the biped to walk over irregular terrain and to admit a broad range of initial conditions. Simulations are given including control tuning guidelines for stable walking.
{"title":"Making a double pendulum walk: from compass- to whip-like gait","authors":"Felipe Cinto, M. Nacusse, H. Haimovich","doi":"10.1109/ARGENCON55245.2022.9939939","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939939","url":null,"abstract":"The double pendulum is the main mechanical structure on which simple biped robots with compass-like gait are based. Although being very energy efficient, the compass-like gait bears the inherent problems of forcing the swing-leg tip to below-ground position while walking and allowing for almost no terrain irregularities. In this paper, an underactuated biped based on the double pendulum is made to walk via swinging the leg in the direction opposite to that of the compass-like gait. Actuation torque on the stance foot is required to change signs during leg swing in order for the pre- and post-impact states to allow for stable limit-cycle walking. This sign-changing torque is implemented by means of a simple control strategy that generates a whip-like gait and allows the biped to walk over irregular terrain and to admit a broad range of initial conditions. Simulations are given including control tuning guidelines for stable walking.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"275 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133133786","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939850
Agustín G. Bucciarelli, C. D. de Angelo, Luis I. Silva
Recent developments in the field of electric vehicles have led to a renewed interest in permanent magnet synchronous machines due to its unique characteristics and performance. In this paper, the state of the art of modelling and efficiency mapping techniques for permanent magnet synchronous motors are re-viewed. Then an efficiency mapping test is done experimentally to validate a simple direct-quadrature model. The good correlation obtained from this model, with an error lower than 2% for the majority of the operating points, shows that the model is adequate for representing the behavior of the machine. Future work will be oriented to develop more complex models and to validate simpler experimental parameters determination techniques.
{"title":"A Review of Techniques for Parameter Determination and Efficiency Mapping in PMSM","authors":"Agustín G. Bucciarelli, C. D. de Angelo, Luis I. Silva","doi":"10.1109/ARGENCON55245.2022.9939850","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939850","url":null,"abstract":"Recent developments in the field of electric vehicles have led to a renewed interest in permanent magnet synchronous machines due to its unique characteristics and performance. In this paper, the state of the art of modelling and efficiency mapping techniques for permanent magnet synchronous motors are re-viewed. Then an efficiency mapping test is done experimentally to validate a simple direct-quadrature model. The good correlation obtained from this model, with an error lower than 2% for the majority of the operating points, shows that the model is adequate for representing the behavior of the machine. Future work will be oriented to develop more complex models and to validate simpler experimental parameters determination techniques.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115976662","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9940071
E. Gomez, Manuel Saravia, Walter B. Castelló, Sergio A. Elaskar
Este trabajo propone un modelo electromecánico no estacionario para simular el comportamiento de propulsores de plasma pulsantes ablativos, con el objetivo de caracterizar el desempeño del propulsor. Además de la ecuación circuital y la ecuación que modela la aceleración de la lámina de plasma, el modelo introduce una ecuación empírica para estimar la masa ablacionada, así como un sistema de ecuaciones basado en la ecuación de Saha, el cual permite modelar la evolución de la densidad del plasma. La introducción de este sistema de ecuaciones requiere de considerar que el sistema se encuentra localmente en equilibrio termodinámico, lo cual se verifica según el criterio de McWhirter. Además, se modela la evolución de la temperatura del plasma mediante la aplicación de la conservación de la energía de la lámina de plasma, considerando el calentamiento por efecto Joule, las pérdidas por radiación y la energía asociada a la fuerza de Lorentz. Al modelo se lo implementa numéricamente, lo que permite estimar parámetros de rendimiento, como la masa ablacionada, el bit de impulso, el impulso específico y la eficiencia propulsiva, entre otros. El modelo ha sido comparado y validado con resultados experimentales de la literatura, demostrando ser capaz de reproducir las variables de desempeño de los APPT dentro de un margen de error del 15 %.
{"title":"Modelo Electromecánico No Estacionario para la Evaluación del Comportamiento de Propulsores de Plasma Pulsantes Ablativos","authors":"E. Gomez, Manuel Saravia, Walter B. Castelló, Sergio A. Elaskar","doi":"10.1109/ARGENCON55245.2022.9940071","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9940071","url":null,"abstract":"Este trabajo propone un modelo electromecánico no estacionario para simular el comportamiento de propulsores de plasma pulsantes ablativos, con el objetivo de caracterizar el desempeño del propulsor. Además de la ecuación circuital y la ecuación que modela la aceleración de la lámina de plasma, el modelo introduce una ecuación empírica para estimar la masa ablacionada, así como un sistema de ecuaciones basado en la ecuación de Saha, el cual permite modelar la evolución de la densidad del plasma. La introducción de este sistema de ecuaciones requiere de considerar que el sistema se encuentra localmente en equilibrio termodinámico, lo cual se verifica según el criterio de McWhirter. Además, se modela la evolución de la temperatura del plasma mediante la aplicación de la conservación de la energía de la lámina de plasma, considerando el calentamiento por efecto Joule, las pérdidas por radiación y la energía asociada a la fuerza de Lorentz. Al modelo se lo implementa numéricamente, lo que permite estimar parámetros de rendimiento, como la masa ablacionada, el bit de impulso, el impulso específico y la eficiencia propulsiva, entre otros. El modelo ha sido comparado y validado con resultados experimentales de la literatura, demostrando ser capaz de reproducir las variables de desempeño de los APPT dentro de un margen de error del 15 %.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124287957","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939885
E. Espinosa, L. Rodríguez, Carlos Scioli
This paper studies the temporal evolution, spatial distribution and frequency of occurrence of water-affected surfaces in a typical plain basin of Santa Fe Province (Argentina). The analysis was based on MNDWI time series, obtained from Landsat 8 and MODIS images of the period 2000-2021. By MNDWI thresholding, Open Water and Mixed Water surfaces were identified. In addition, the temporal fluctuation of water-affected surfaces in response to the seasonal cycle of precipitation was explored, which would be influenced by the antecedent water storage. Most of the water-affected surfaces are composed of Mixed Water, Open Water surfaces are made up of certain water bodies with a high frequency of occurrence, located in the lower part of the basin. A sector of accumulation in the upper part coincides with an area of "cañadas". In other sectors of the basin, the surfaces affected by water have low frequencies of occurrence. These results contribute to the knowledge of water dynamics of the study area, and are very useful for the planning and management of the region’s water resources.
{"title":"Dinámica de inundación de una cuenca de la llanura Santafecina","authors":"E. Espinosa, L. Rodríguez, Carlos Scioli","doi":"10.1109/ARGENCON55245.2022.9939885","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939885","url":null,"abstract":"This paper studies the temporal evolution, spatial distribution and frequency of occurrence of water-affected surfaces in a typical plain basin of Santa Fe Province (Argentina). The analysis was based on MNDWI time series, obtained from Landsat 8 and MODIS images of the period 2000-2021. By MNDWI thresholding, Open Water and Mixed Water surfaces were identified. In addition, the temporal fluctuation of water-affected surfaces in response to the seasonal cycle of precipitation was explored, which would be influenced by the antecedent water storage. Most of the water-affected surfaces are composed of Mixed Water, Open Water surfaces are made up of certain water bodies with a high frequency of occurrence, located in the lower part of the basin. A sector of accumulation in the upper part coincides with an area of \"cañadas\". In other sectors of the basin, the surfaces affected by water have low frequencies of occurrence. These results contribute to the knowledge of water dynamics of the study area, and are very useful for the planning and management of the region’s water resources.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"105 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117301392","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939860
María Eugenia Lanigan Gutiérrez, C. Fernández, L. Rodríguez, M. Noriega, Nadia Pantano, G. Scaglia
The following work shows a methodology for the optimization of a fed-batch fermentation process to maximize xylitol production. The bioreactor is fed with two substrates (different streams): xylose and glucose. A technique based on the Fourier series and orthonormal polynomials is proposed for the parameterization of the control actions, and evolutionary algorithms for the optimization of the parameters involved. One of the most obvious advantages of this proposal is that smooth profiles are obtained (continuous and differentiable), using a minimum number of parameters and reaching an increase in the final product concentration of 2.9%.
{"title":"Optimización Dinámica del Proceso de Fermentación para la Producción de Xilitol","authors":"María Eugenia Lanigan Gutiérrez, C. Fernández, L. Rodríguez, M. Noriega, Nadia Pantano, G. Scaglia","doi":"10.1109/ARGENCON55245.2022.9939860","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939860","url":null,"abstract":"The following work shows a methodology for the optimization of a fed-batch fermentation process to maximize xylitol production. The bioreactor is fed with two substrates (different streams): xylose and glucose. A technique based on the Fourier series and orthonormal polynomials is proposed for the parameterization of the control actions, and evolutionary algorithms for the optimization of the parameters involved. One of the most obvious advantages of this proposal is that smooth profiles are obtained (continuous and differentiable), using a minimum number of parameters and reaching an increase in the final product concentration of 2.9%.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123677847","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：