Pub Date : 2021-03-25DOI: 10.1109/ATEE52255.2021.9425180
H. Kagami
The mathematical model of arteriosclerosis onset is modified adding the effect of repairing flaws of the intima. Numerical simulations of the modified mathematical model reveal that the effect of repairing flaws of the intima suppresses the progression of arteriosclerosis. And the numerical simulations also reveal that the rapider improving the number of flaws per unit area of the intima, the greater the degree to which the reduction of the volume of the blood vessel in the arteriosclerosis-causing part is suppressed. However, in case for example the cholesterol concentration in blood is high, the effect of suppressing the progression of arteriosclerosis is small. These results will provide quantitative suggestions for clinical treatment.
{"title":"The Modified Mathematical Model of Arteriosclerosis onset: Adding the Effect of Repairing Flaws of the Intima","authors":"H. Kagami","doi":"10.1109/ATEE52255.2021.9425180","DOIUrl":"https://doi.org/10.1109/ATEE52255.2021.9425180","url":null,"abstract":"The mathematical model of arteriosclerosis onset is modified adding the effect of repairing flaws of the intima. Numerical simulations of the modified mathematical model reveal that the effect of repairing flaws of the intima suppresses the progression of arteriosclerosis. And the numerical simulations also reveal that the rapider improving the number of flaws per unit area of the intima, the greater the degree to which the reduction of the volume of the blood vessel in the arteriosclerosis-causing part is suppressed. However, in case for example the cholesterol concentration in blood is high, the effect of suppressing the progression of arteriosclerosis is small. These results will provide quantitative suggestions for clinical treatment.","PeriodicalId":359645,"journal":{"name":"2021 12th International Symposium on Advanced Topics in Electrical Engineering (ATEE)","volume":"86 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125026438","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-03-25DOI: 10.1109/ATEE52255.2021.9425253
O. Grosu, D. Milici, Mihaela Pavăl, Eusebiu Toader
Humanity is in a continue research and development to find new materials in order to replace the classic ones. Smart materials are one of the solutions. In this article we present a review over the developed actuators in the last years, using polymers. This review highlights multiple type of the actuators, their structure and strategy and classifies them after the application domain and their main objective. Using VOSviewer we built bibliometric maps to present the importance of items as “performance”, “force”, “system”, “actuation”, etc. for the development of new actuators.
{"title":"Polymeric actuator analysis using bibliometric maps","authors":"O. Grosu, D. Milici, Mihaela Pavăl, Eusebiu Toader","doi":"10.1109/ATEE52255.2021.9425253","DOIUrl":"https://doi.org/10.1109/ATEE52255.2021.9425253","url":null,"abstract":"Humanity is in a continue research and development to find new materials in order to replace the classic ones. Smart materials are one of the solutions. In this article we present a review over the developed actuators in the last years, using polymers. This review highlights multiple type of the actuators, their structure and strategy and classifies them after the application domain and their main objective. Using VOSviewer we built bibliometric maps to present the importance of items as “performance”, “force”, “system”, “actuation”, etc. for the development of new actuators.","PeriodicalId":359645,"journal":{"name":"2021 12th International Symposium on Advanced Topics in Electrical Engineering (ATEE)","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129446619","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-03-25DOI: 10.1109/ATEE52255.2021.9425166
V. Ionescu
This study developed a bi-dimensional model of a steel-reinforced concrete (RC) structure under cathodic protection against corrosion using the Finite Element Model (FEM) based Comsol Multiphysics software. Two small RC samples’ frontal geometry was considered from a reported experimental study, tested here against corrosion in a chloride environment. Those samples had different rebar diameters (10 mm and 16 mm). The reported specific electrochemical parameters and material properties were selected through this numerical investigation. The cathodic protection system’s optimization process was based on identifying the appropriate external applied potential $E_{app}i$ which lowers at minimum the corrosion rate. In this purpose, the first average corrosion current density iFe under the value with minimum corrosion risk (of 0.1 $mu A/cm^{2}$) was identified for both models. For Model 1 with rebar diameter of 10 mm, a safe iFe value of 0.087 $mu A/cm^{2}$ was attained $E_{app}i=-0.225V$, and for Model 2 with rebar diameter of16 mm, $i_{Fe}=0.085mu A/cm^{2}$ at $E_{app}i=-0.15$ V.
本研究利用Comsol Multiphysics有限元模型软件建立了阴极保护下钢筋混凝土(RC)结构抗腐蚀的二维模型。两个小的RC样品的正面几何形状是从一个报告的实验研究中考虑的，在氯化物环境中进行了腐蚀测试。这些样品的钢筋直径不同(10毫米和16毫米)。通过数值研究选择了所报道的具体电化学参数和材料性能。阴极保护系统的优化过程是基于确定适当的外部外加电位$E_{app}i$，使腐蚀速率最低。为此，确定了两种模型在最小腐蚀风险值(0.1 $mu A/cm^{2}$)下的第一个平均腐蚀电流密度iFe。当钢筋直径为10 mm时，模型1的安全寿命值为0.087 $mu a /cm^{2}$ E_{app}i=-0.225V$;当钢筋直径为16 mm时，模型2在E_{app}i=-0.15$ V时，安全寿命值为$i_{Fe}=0.085 $mu a /cm^{2}$。
{"title":"A FEM Model for the Cathodic Corrosion Protection of Reinforcing Steel in Concrete Structures Exposed to Chloride Contamination","authors":"V. Ionescu","doi":"10.1109/ATEE52255.2021.9425166","DOIUrl":"https://doi.org/10.1109/ATEE52255.2021.9425166","url":null,"abstract":"This study developed a bi-dimensional model of a steel-reinforced concrete (RC) structure under cathodic protection against corrosion using the Finite Element Model (FEM) based Comsol Multiphysics software. Two small RC samples’ frontal geometry was considered from a reported experimental study, tested here against corrosion in a chloride environment. Those samples had different rebar diameters (10 mm and 16 mm). The reported specific electrochemical parameters and material properties were selected through this numerical investigation. The cathodic protection system’s optimization process was based on identifying the appropriate external applied potential $E_{app}i$ which lowers at minimum the corrosion rate. In this purpose, the first average corrosion current density iFe under the value with minimum corrosion risk (of 0.1 $mu A/cm^{2}$) was identified for both models. For Model 1 with rebar diameter of 10 mm, a safe iFe value of 0.087 $mu A/cm^{2}$ was attained $E_{app}i=-0.225V$, and for Model 2 with rebar diameter of16 mm, $i_{Fe}=0.085mu A/cm^{2}$ at $E_{app}i=-0.15$ V.","PeriodicalId":359645,"journal":{"name":"2021 12th International Symposium on Advanced Topics in Electrical Engineering (ATEE)","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128627839","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The work reports the experimental investigations of complex fluids rheometry in the presence of patterned surfaces. The goal of the study is to explore a novel procedure to detect the shear rates domain where possible wall depletion might be present. The measurements are performed in simple shear with the Anton-Paar MC301 rotational rheometer, the samples (xantan solution and grease) being located between a smooth plate and a special manufactured lower plate patterned with pillars. The rheological behavior of the samples in the tested configurations are characterized by two material functions: (i) the flow curve $sigma(dot{gamma})$ and (ii) the differential viscosity $boldsymbol{eta}_{d}=boldsymbol{d} sigma / boldsymbol{d} dot{gamma}$, where $sigma$ is the shear stress and $dot{gamma}$ is the shear rate. The experimental data put in evidence an instability region, which is related to the plateau of the flow curve and possible apparent slip at the walls. The existence of the yield stress is also discussed.
{"title":"Material Functions to Characterize the Rheometry of Complex Fluids","authors":"Broboană Diana, Ionescu Cristina Sorana, Bălan Corneliu","doi":"10.1109/ATEE52255.2021.9425169","DOIUrl":"https://doi.org/10.1109/ATEE52255.2021.9425169","url":null,"abstract":"The work reports the experimental investigations of complex fluids rheometry in the presence of patterned surfaces. The goal of the study is to explore a novel procedure to detect the shear rates domain where possible wall depletion might be present. The measurements are performed in simple shear with the Anton-Paar MC301 rotational rheometer, the samples (xantan solution and grease) being located between a smooth plate and a special manufactured lower plate patterned with pillars. The rheological behavior of the samples in the tested configurations are characterized by two material functions: (i) the flow curve $sigma(dot{gamma})$ and (ii) the differential viscosity $boldsymbol{eta}_{d}=boldsymbol{d} sigma / boldsymbol{d} dot{gamma}$, where $sigma$ is the shear stress and $dot{gamma}$ is the shear rate. The experimental data put in evidence an instability region, which is related to the plateau of the flow curve and possible apparent slip at the walls. The existence of the yield stress is also discussed.","PeriodicalId":359645,"journal":{"name":"2021 12th International Symposium on Advanced Topics in Electrical Engineering (ATEE)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129069799","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-03-25DOI: 10.1109/ATEE52255.2021.9425231
E. Spunei, I. Piroi, Florina Piroi, Gheorghe-Ștefan Mătăsaru
Low power photovoltaic installations must ensure the necessary energy level requirements of the installation’s beneficiary. At the same time, it must be conform to the legal regulations and norms. When a photovoltaic installation is to be delivered into the power supply network, its operating parameters must be closely monitored. In this work we present the results of our monitoring of a low power photovoltaic installation. Upon examination of the voltage variations, of the currents, of the voltage and current harmonics, we conclude that the installation we studied does indeed fulfill the necessary requirements for connecting to the national power grid. Examining the energy levels consumed by the beneficiary, we find that the photovoltaic installation cannot continuously ensure the required energy levels, which recommends the acquisition of an additional photovoltaic installation.
{"title":"Examining the Performances of a Low Power Photovoltaic Installation","authors":"E. Spunei, I. Piroi, Florina Piroi, Gheorghe-Ștefan Mătăsaru","doi":"10.1109/ATEE52255.2021.9425231","DOIUrl":"https://doi.org/10.1109/ATEE52255.2021.9425231","url":null,"abstract":"Low power photovoltaic installations must ensure the necessary energy level requirements of the installation’s beneficiary. At the same time, it must be conform to the legal regulations and norms. When a photovoltaic installation is to be delivered into the power supply network, its operating parameters must be closely monitored. In this work we present the results of our monitoring of a low power photovoltaic installation. Upon examination of the voltage variations, of the currents, of the voltage and current harmonics, we conclude that the installation we studied does indeed fulfill the necessary requirements for connecting to the national power grid. Examining the energy levels consumed by the beneficiary, we find that the photovoltaic installation cannot continuously ensure the required energy levels, which recommends the acquisition of an additional photovoltaic installation.","PeriodicalId":359645,"journal":{"name":"2021 12th International Symposium on Advanced Topics in Electrical Engineering (ATEE)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130289178","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-03-25DOI: 10.1109/ATEE52255.2021.9425303
L. Taranu, P. Notingher, C. Stancu
This paper presents the results of a study regarding the influence of a Field Grading Material (FGM) on the electric field and temperature distributions in the insulations of a power cable joint model. The computation was performed at steady state for a cable joint insulation consisting of Ethylene Propylene Rubber (EPR) installed for a cable with Cross-linked Polyethylene (XLPE) insulation. The presence of the FGM layer leads to important modifications of the electric field values, especially near the corners of the cable joint inner semiconductive layer. The results also show that the maximum electric field and temperature values, as well as the surface charge density values present at the interface between the insulations are lowered by using a FGM layer. This leads to reduced electric stresses and charge injection. The reduction of the surface charge density values also reduces the values of the residual electric field and leads to a slowdown of insulation ageing.
{"title":"Influence of FGM layer on the distribution of the electric field in DC cable joints insulations","authors":"L. Taranu, P. Notingher, C. Stancu","doi":"10.1109/ATEE52255.2021.9425303","DOIUrl":"https://doi.org/10.1109/ATEE52255.2021.9425303","url":null,"abstract":"This paper presents the results of a study regarding the influence of a Field Grading Material (FGM) on the electric field and temperature distributions in the insulations of a power cable joint model. The computation was performed at steady state for a cable joint insulation consisting of Ethylene Propylene Rubber (EPR) installed for a cable with Cross-linked Polyethylene (XLPE) insulation. The presence of the FGM layer leads to important modifications of the electric field values, especially near the corners of the cable joint inner semiconductive layer. The results also show that the maximum electric field and temperature values, as well as the surface charge density values present at the interface between the insulations are lowered by using a FGM layer. This leads to reduced electric stresses and charge injection. The reduction of the surface charge density values also reduces the values of the residual electric field and leads to a slowdown of insulation ageing.","PeriodicalId":359645,"journal":{"name":"2021 12th International Symposium on Advanced Topics in Electrical Engineering (ATEE)","volume":"55 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123238527","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-03-25DOI: 10.1109/ATEE52255.2021.9425092
Vladimir Maksimovic, M. Milošević, M. Petrovic, B. Jaksic, P. Spalević
The paper provides a functional solution for design and implementation of multimedia TV systems from a technical and practical aspect. The multimedia TV system can be used as the educational laboratory and in the TV content production. The paper shows structure of a TV system, functional block diagram of implemented video and audio system with enabled connections of the devices in the system. In paper is presented a method for connecting TV equipment for professional production and broadcasting but also can be used as educational laboratory. The implemented TV system is designed to produce content of various video formats, so that content can be transmitted and produced up to 4K resolution. The laboratory is designed in that way where all signals that are received and sent can be analyzed and measured. The laboratory is implemented at a higher education institution and also can be implemented in other educational institutions, as well as in professional television stations.
{"title":"Digital Multimedia Television System","authors":"Vladimir Maksimovic, M. Milošević, M. Petrovic, B. Jaksic, P. Spalević","doi":"10.1109/ATEE52255.2021.9425092","DOIUrl":"https://doi.org/10.1109/ATEE52255.2021.9425092","url":null,"abstract":"The paper provides a functional solution for design and implementation of multimedia TV systems from a technical and practical aspect. The multimedia TV system can be used as the educational laboratory and in the TV content production. The paper shows structure of a TV system, functional block diagram of implemented video and audio system with enabled connections of the devices in the system. In paper is presented a method for connecting TV equipment for professional production and broadcasting but also can be used as educational laboratory. The implemented TV system is designed to produce content of various video formats, so that content can be transmitted and produced up to 4K resolution. The laboratory is designed in that way where all signals that are received and sent can be analyzed and measured. The laboratory is implemented at a higher education institution and also can be implemented in other educational institutions, as well as in professional television stations.","PeriodicalId":359645,"journal":{"name":"2021 12th International Symposium on Advanced Topics in Electrical Engineering (ATEE)","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126490978","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-03-25DOI: 10.1109/ATEE52255.2021.9425132
R. Popa, G. Iubu
This paper presents a comparative analysis of planar phased arrays, uniformly excited and evenly distributed in rows and columns, based on data obtained by means of a software program for the calculation and graphical representation of the sum and difference patterns (mono pulse). The program provides the possibility to calculate and graph the patterns for a planar phased array (half-wavelength dipoles), in the absence of mutual coupling between the antennas in the array. Calculations and graphs, performed for both an array with a square planar aperture and an array with a circular planar aperture, show that, at similar results (opening, gain), there are at least two net advantages of the circular planar array respectively, the number of antenna elements is lower (which implies a lower cost price) and lower levels of side lobes to the patterns.
{"title":"Comparative Analysis of Planar Phased Arrays, Evenly Distributed and Uniformly Excited, with Square Aperture and Circular Aperture","authors":"R. Popa, G. Iubu","doi":"10.1109/ATEE52255.2021.9425132","DOIUrl":"https://doi.org/10.1109/ATEE52255.2021.9425132","url":null,"abstract":"This paper presents a comparative analysis of planar phased arrays, uniformly excited and evenly distributed in rows and columns, based on data obtained by means of a software program for the calculation and graphical representation of the sum and difference patterns (mono pulse). The program provides the possibility to calculate and graph the patterns for a planar phased array (half-wavelength dipoles), in the absence of mutual coupling between the antennas in the array. Calculations and graphs, performed for both an array with a square planar aperture and an array with a circular planar aperture, show that, at similar results (opening, gain), there are at least two net advantages of the circular planar array respectively, the number of antenna elements is lower (which implies a lower cost price) and lower levels of side lobes to the patterns.","PeriodicalId":359645,"journal":{"name":"2021 12th International Symposium on Advanced Topics in Electrical Engineering (ATEE)","volume":"68 10","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114103427","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-03-25DOI: 10.1109/ATEE52255.2021.9425181
Corina-Ioana Cobzac, C. Comeaga
This paper contains the description of a platform with two degrees of freedom which is controlled by two electric actuators. Being actuated only by two actuators, the platform can be made in miniature. In the present document the realization of a platform with two degrees of freedom is presented that can maintain the horizontal position of an object up to 10 N. The efficiency has been demonstrated by testing the device while walking and having as object a container with liquid. The purpose of the study is to minimize the costs of making such platforms and their widespread use in various fields (e.g. cup holder that can be mounted on car dashboard). The project is completely original and by choosing another processing system and other actuators and through improvement of algorithms a device for vibration elimination (e.g. the hand tremors) can be accomplished.
{"title":"Portable Self-Orientation System for Hand Movements Compensation","authors":"Corina-Ioana Cobzac, C. Comeaga","doi":"10.1109/ATEE52255.2021.9425181","DOIUrl":"https://doi.org/10.1109/ATEE52255.2021.9425181","url":null,"abstract":"This paper contains the description of a platform with two degrees of freedom which is controlled by two electric actuators. Being actuated only by two actuators, the platform can be made in miniature. In the present document the realization of a platform with two degrees of freedom is presented that can maintain the horizontal position of an object up to 10 N. The efficiency has been demonstrated by testing the device while walking and having as object a container with liquid. The purpose of the study is to minimize the costs of making such platforms and their widespread use in various fields (e.g. cup holder that can be mounted on car dashboard). The project is completely original and by choosing another processing system and other actuators and through improvement of algorithms a device for vibration elimination (e.g. the hand tremors) can be accomplished.","PeriodicalId":359645,"journal":{"name":"2021 12th International Symposium on Advanced Topics in Electrical Engineering (ATEE)","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121554727","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-03-25DOI: 10.1109/ATEE52255.2021.9425206
Roxana-Maria Baerov, A. Morega, M. Morega
Magnetotherapy is applied as an efficient physiotherapy method in the process of recovery, following orthopedic injuries. If the bone fracture is unstable, a compression plate is needed; it is maintained for a long period after surgery, approx. one year, while intensive recovery is required, including magnetotherapy. The effects of this method can be analyzed by numerical simulation, using computational domains, tailored to the personalized anatomy of the patient.This study is concerned with the numerical modeling of the magnetic field problem and the heat transfer problem associated with magnetotherapy, using a three-dimensional computational domain that reproduces the bone and the tissue obtained by imaging reconstruction and a CAD design of a titanium compression plate that is fixed across the femur. In this paper, the coils are energized with a pulsed current, which allows adjusting the electromagnetic energy delivered to the body.
{"title":"Thermal Effects of Pulsed Magnetotherapy on Implants","authors":"Roxana-Maria Baerov, A. Morega, M. Morega","doi":"10.1109/ATEE52255.2021.9425206","DOIUrl":"https://doi.org/10.1109/ATEE52255.2021.9425206","url":null,"abstract":"Magnetotherapy is applied as an efficient physiotherapy method in the process of recovery, following orthopedic injuries. If the bone fracture is unstable, a compression plate is needed; it is maintained for a long period after surgery, approx. one year, while intensive recovery is required, including magnetotherapy. The effects of this method can be analyzed by numerical simulation, using computational domains, tailored to the personalized anatomy of the patient.This study is concerned with the numerical modeling of the magnetic field problem and the heat transfer problem associated with magnetotherapy, using a three-dimensional computational domain that reproduces the bone and the tissue obtained by imaging reconstruction and a CAD design of a titanium compression plate that is fixed across the femur. In this paper, the coils are energized with a pulsed current, which allows adjusting the electromagnetic energy delivered to the body.","PeriodicalId":359645,"journal":{"name":"2021 12th International Symposium on Advanced Topics in Electrical Engineering (ATEE)","volume":"82 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132683051","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：