Abstract This paper describes results of integrated precipitable water co-located measurements from two techniques: GPS solution and CIMEL-318 sunphotometer. Integrated Precipitable Water (IPW) is an important meteorological parameter and is derived from GPS tropospheric solutions for GPS station at Central Geophysical Observatory (CGO), Polish Academy of Sciences (PAS), Belsk and compared with sunphotometer (CIMEL-318 device by Cimel Electronique) data provided by Aerosol Robotic Network (AERONET). Two dedicated and independent GPS solutions: network solution in the sub-network of European Permanent Network (EPN) and precise point positioning solution have been made to obtain tropospheric delays. The quality of dedicated tropospheric solutions has been verified by comparison with EPN tropospheric combined product. Several IPW comparisons and analyses revealed systematic difference between techniques (difference RMS is over 1 mm). IPW bias changes with season: annual close to 1 mm IPW (and semi-annual term also present). IPW bias is a function of atmospheric temperature. Probable cause of this systematic deficiency in solar photometry as IPW retrieval technique is a change of optical filter characteristics in CIMEL.
{"title":"Integrated Precipitable Water from GPS Observations and CIMEL Sunphotometer Measurements at CGO Belsk","authors":"M. Kruczyk, T. Liwosz, A. Pietruczuk","doi":"10.1515/rgg-2017-0005","DOIUrl":"https://doi.org/10.1515/rgg-2017-0005","url":null,"abstract":"Abstract This paper describes results of integrated precipitable water co-located measurements from two techniques: GPS solution and CIMEL-318 sunphotometer. Integrated Precipitable Water (IPW) is an important meteorological parameter and is derived from GPS tropospheric solutions for GPS station at Central Geophysical Observatory (CGO), Polish Academy of Sciences (PAS), Belsk and compared with sunphotometer (CIMEL-318 device by Cimel Electronique) data provided by Aerosol Robotic Network (AERONET). Two dedicated and independent GPS solutions: network solution in the sub-network of European Permanent Network (EPN) and precise point positioning solution have been made to obtain tropospheric delays. The quality of dedicated tropospheric solutions has been verified by comparison with EPN tropospheric combined product. Several IPW comparisons and analyses revealed systematic difference between techniques (difference RMS is over 1 mm). IPW bias changes with season: annual close to 1 mm IPW (and semi-annual term also present). IPW bias is a function of atmospheric temperature. Probable cause of this systematic deficiency in solar photometry as IPW retrieval technique is a change of optical filter characteristics in CIMEL.","PeriodicalId":42010,"journal":{"name":"Reports on Geodesy and Geoinformatics","volume":null,"pages":null},"PeriodicalIF":0.7,"publicationDate":"2017-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90605805","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The study evaluates the accuracy of determining coordinates of a corner of a building measured in the RTN GNSS mode (Real Time Network Global Navigation Satellite System) using the method of line-line intersection and having applied the algorithm of vector translation, developed by the author. The performed analysis of accuracy proved a high precision in determining the points subjected to studies. An important factor in the formation of a mean error regarding the position of the corner of a building, having used the algorithm of vector translation, is the assumption of correctness of the reference points, i.e. the so-called base points, determined in the RTN GNSS mode. In this case, the base points take the role of measurement control points. The mean error of the position of the corner of a building, taking into account the innovative solution, is at the level of several centimeters. The study results presented in the article allow to positively evaluate the algorithm of vector translation in terms of accuracy of determining the position of a corner of a building, measured in real time.
摘要:本研究对RTN GNSS模式(Real Time Network Global Navigation Satellite System，实时网络全球导航卫星系统)下，采用线-线交点法，采用作者自行开发的矢量平移算法，对建筑物一角坐标的确定精度进行了评价。所进行的精度分析证明，在确定研究点时具有很高的精度。在使用矢量平移算法后，形成建筑物拐角位置平均误差的一个重要因素是假设RTN GNSS模式中确定的参考点(即所谓的基点)的正确性。在这种情况下，基点充当测量控制点的角色。考虑到创新的解决方案，建筑物角落位置的平均误差在几厘米的水平。本文提出的研究结果可以从实时测量的确定建筑物角落位置的准确性方面对矢量平移算法进行正面评价。
{"title":"Evaluating the Accuracy of Determining Coordinates of a Corner of a Building Measured in the RTN GNSS Mode, Having Applied the Innovative Algorithm of Vector Translation","authors":"Robert Krzyżek","doi":"10.1515/rgg-2017-0002","DOIUrl":"https://doi.org/10.1515/rgg-2017-0002","url":null,"abstract":"Abstract The study evaluates the accuracy of determining coordinates of a corner of a building measured in the RTN GNSS mode (Real Time Network Global Navigation Satellite System) using the method of line-line intersection and having applied the algorithm of vector translation, developed by the author. The performed analysis of accuracy proved a high precision in determining the points subjected to studies. An important factor in the formation of a mean error regarding the position of the corner of a building, having used the algorithm of vector translation, is the assumption of correctness of the reference points, i.e. the so-called base points, determined in the RTN GNSS mode. In this case, the base points take the role of measurement control points. The mean error of the position of the corner of a building, taking into account the innovative solution, is at the level of several centimeters. The study results presented in the article allow to positively evaluate the algorithm of vector translation in terms of accuracy of determining the position of a corner of a building, measured in real time.","PeriodicalId":42010,"journal":{"name":"Reports on Geodesy and Geoinformatics","volume":null,"pages":null},"PeriodicalIF":0.7,"publicationDate":"2017-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"77733710","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract According to the original wording of the Regulation on the register of land and buildings of 2001, in the real estate cadastre there was one attribute associated with the use of a building structure - its intended use, which was applicable until the amendment to the Regulation was introduced in 2013. Then, additional attributes were added, i.e. the type of the building according to the Classification of Fixed Assets (KST), the class of the building according to the Polish Classification of Types of Constructions (PKOB) and, at the same time, the main functional use and other functions of the building remained in the Regulation as well. The record data on buildings are captured for the real estate cadastre from other data sets, for example those maintained by architectural and construction authorities. At the same time, the data contained in the cadastre, after they have been entered or changed in the database, are transferred to other registers, such as tax records, or land and mortgage court registers. This study is the result of the analysis of the laws applicable to the specific units and registers. A list of discrepancies in the attributes occurring in the different registers was prepared. The practical part of the study paid particular attention to the legal bases and procedures for entering the function of a building in the real estate cadastre, which is extremely significant, as it is the attribute determining the property tax basis.
{"title":"Intended Use of a Building in Terms of Updating the Cadastral Database and Harmonizing the Data with other Public Records","authors":"M. Buśko","doi":"10.1515/rgg-2017-0007","DOIUrl":"https://doi.org/10.1515/rgg-2017-0007","url":null,"abstract":"Abstract According to the original wording of the Regulation on the register of land and buildings of 2001, in the real estate cadastre there was one attribute associated with the use of a building structure - its intended use, which was applicable until the amendment to the Regulation was introduced in 2013. Then, additional attributes were added, i.e. the type of the building according to the Classification of Fixed Assets (KST), the class of the building according to the Polish Classification of Types of Constructions (PKOB) and, at the same time, the main functional use and other functions of the building remained in the Regulation as well. The record data on buildings are captured for the real estate cadastre from other data sets, for example those maintained by architectural and construction authorities. At the same time, the data contained in the cadastre, after they have been entered or changed in the database, are transferred to other registers, such as tax records, or land and mortgage court registers. This study is the result of the analysis of the laws applicable to the specific units and registers. A list of discrepancies in the attributes occurring in the different registers was prepared. The practical part of the study paid particular attention to the legal bases and procedures for entering the function of a building in the real estate cadastre, which is extremely significant, as it is the attribute determining the property tax basis.","PeriodicalId":42010,"journal":{"name":"Reports on Geodesy and Geoinformatics","volume":null,"pages":null},"PeriodicalIF":0.7,"publicationDate":"2017-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78684216","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract This paper presents ambiguity resolution in the range-based ZigBee positioning system. The system is using the phase shift measurements to determine the distances between user and anchors. In this paper, the ambiguity is defined as the number of full reps of a certain distance added to the measurement result. The way of resolving ambiguities in the positioning system is described and an experiment results are presented. Featured algorithm is successful in finding ambiguities and correct location of the user.
{"title":"An Example and Analysis for Ambiguity Resolution in the Indoor ZigBee Positioning System","authors":"J. Janicka, J. Rapiński","doi":"10.1515/rgg-2017-0001","DOIUrl":"https://doi.org/10.1515/rgg-2017-0001","url":null,"abstract":"Abstract This paper presents ambiguity resolution in the range-based ZigBee positioning system. The system is using the phase shift measurements to determine the distances between user and anchors. In this paper, the ambiguity is defined as the number of full reps of a certain distance added to the measurement result. The way of resolving ambiguities in the positioning system is described and an experiment results are presented. Featured algorithm is successful in finding ambiguities and correct location of the user.","PeriodicalId":42010,"journal":{"name":"Reports on Geodesy and Geoinformatics","volume":null,"pages":null},"PeriodicalIF":0.7,"publicationDate":"2017-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86623812","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The basis for the quality control of commodity dimension stone blocks for mining industry is the study of fracturing. The identification of fracturing in rock masses is one of the most important aspects in rock mass modelling. Traditional methods for determination properties of fracturing are difficult and hazardous. This paper describes a new approach of fracturing identification, based on image and range data, which realized by image processing and special software. In this article describes a method using new computer algorithms that allow for automated identification and calculation of fracturing parameters. Different digital filters for image processing and mathematical dependences are analyzed. The digital imaging technique has the potential for being used in real time applications. The purpose of this paper is the accurate and fast mapping of fracturing in some walls of the Bukinsky gabbro deposit.
{"title":"The New Approach of Using Image and Range Based Methods for Quality Control of Dimension Stone","authors":"V. Levytskyi","doi":"10.1515/rgg-2017-0006","DOIUrl":"https://doi.org/10.1515/rgg-2017-0006","url":null,"abstract":"Abstract The basis for the quality control of commodity dimension stone blocks for mining industry is the study of fracturing. The identification of fracturing in rock masses is one of the most important aspects in rock mass modelling. Traditional methods for determination properties of fracturing are difficult and hazardous. This paper describes a new approach of fracturing identification, based on image and range data, which realized by image processing and special software. In this article describes a method using new computer algorithms that allow for automated identification and calculation of fracturing parameters. Different digital filters for image processing and mathematical dependences are analyzed. The digital imaging technique has the potential for being used in real time applications. The purpose of this paper is the accurate and fast mapping of fracturing in some walls of the Bukinsky gabbro deposit.","PeriodicalId":42010,"journal":{"name":"Reports on Geodesy and Geoinformatics","volume":null,"pages":null},"PeriodicalIF":0.7,"publicationDate":"2017-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83572682","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The paper describes a modified algorithm of determination of the Euler pole coordinates and angular velocity of the tectonic plate, considering the continuous and uneven distribution of daily measurements of GNSS permanent stations. Using developed algorithm were determined the mean position of Euler pole and angular velocity of Antarctic tectonic plate and their annual changes. As the input data, we used the results of observations, collected on 28 permanent stations of the Antarctic region, within the period from 1996 to 2014.
{"title":"Investigation of Changes of the Kinematic Parameters of Antarctic Tectonic Plate Using Data Observations of Permanent GNSS Stations","authors":"K. Tretyak, Al-Alusi Forat, Y. Holubinka","doi":"10.1515/rgg-2017-0010","DOIUrl":"https://doi.org/10.1515/rgg-2017-0010","url":null,"abstract":"Abstract The paper describes a modified algorithm of determination of the Euler pole coordinates and angular velocity of the tectonic plate, considering the continuous and uneven distribution of daily measurements of GNSS permanent stations. Using developed algorithm were determined the mean position of Euler pole and angular velocity of Antarctic tectonic plate and their annual changes. As the input data, we used the results of observations, collected on 28 permanent stations of the Antarctic region, within the period from 1996 to 2014.","PeriodicalId":42010,"journal":{"name":"Reports on Geodesy and Geoinformatics","volume":null,"pages":null},"PeriodicalIF":0.7,"publicationDate":"2017-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84020526","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Terrestrial Laser Scanner (TLS) method which is commonly used for geodetic applications has a great potential to be successfully harnessed for multiple civil engineering applications. One of the most promising uses of TLS in construction industry is remote sensing of saturation of building materials. A research programme was prepared in order to prove that harnessing TLS for such an application is viable. Results presented in the current paper are a part of a much larger research programme focused on harnessing TLS for remote sensing of saturation of building materials. The paper describes results of the tests conducted with an impulse scanner Leica C-10. Tests took place both indoors (in a stable lab conditions) and outdoors (in a real environment). There were scanned specimens of the most popular building materials in Europe. Tested specimens were dried and saturated (including capillary rising moisture). One of the tests was performed over a period of 95 hours. Basically, a concrete specimen was scanned during its setting and hardening. It was proven that absorption of a laser signal is influenced by setting and hardening of concrete. Outdoor tests were based on scanning real buildings with partially saturated facades. The saturation assessment was based on differences of values of intensity. The concept proved to be feasible and technically realistic.
{"title":"Remote Sensing to Estimate Saturation Differences of Chosen Building Materials Using Terrestrial Laser Scanner","authors":"C. Suchocki, J. Katzer, A. Panuś","doi":"10.1515/rgg-2017-0008","DOIUrl":"https://doi.org/10.1515/rgg-2017-0008","url":null,"abstract":"Abstract Terrestrial Laser Scanner (TLS) method which is commonly used for geodetic applications has a great potential to be successfully harnessed for multiple civil engineering applications. One of the most promising uses of TLS in construction industry is remote sensing of saturation of building materials. A research programme was prepared in order to prove that harnessing TLS for such an application is viable. Results presented in the current paper are a part of a much larger research programme focused on harnessing TLS for remote sensing of saturation of building materials. The paper describes results of the tests conducted with an impulse scanner Leica C-10. Tests took place both indoors (in a stable lab conditions) and outdoors (in a real environment). There were scanned specimens of the most popular building materials in Europe. Tested specimens were dried and saturated (including capillary rising moisture). One of the tests was performed over a period of 95 hours. Basically, a concrete specimen was scanned during its setting and hardening. It was proven that absorption of a laser signal is influenced by setting and hardening of concrete. Outdoor tests were based on scanning real buildings with partially saturated facades. The saturation assessment was based on differences of values of intensity. The concept proved to be feasible and technically realistic.","PeriodicalId":42010,"journal":{"name":"Reports on Geodesy and Geoinformatics","volume":null,"pages":null},"PeriodicalIF":0.7,"publicationDate":"2017-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"72555386","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Grzegorz Oleniacz, I. Skrzypczak, L. Ślęczka, Tomasz Świętoń, M. Rymar
Abstract Urban is one of the three bells in the belfry of St. Trinity Church in Krosno. It is the largest one, with diameter equal to 1,535 mm and it is commonly considered as one of the largest historical bells in Poland. The total mass of all the three bells is close to 4,200 kilograms, so the dynamic actions produced by swinging have a great effect on the supporting structure and on the tower. However, the exact weight of the biggest bell isn't known, and for safety reasons it should be estimated in order to verify the real dynamic forces affecting the structure. The paper describes the method of Urban bell’s survey using terrestrial laser scanning and a total station as a task to estimate its weight by determining its volume.
{"title":"Survey of the Urban Bell in the Belfry of St. Trinity Church in Krosno","authors":"Grzegorz Oleniacz, I. Skrzypczak, L. Ślęczka, Tomasz Świętoń, M. Rymar","doi":"10.1515/rgg-2017-0004","DOIUrl":"https://doi.org/10.1515/rgg-2017-0004","url":null,"abstract":"Abstract Urban is one of the three bells in the belfry of St. Trinity Church in Krosno. It is the largest one, with diameter equal to 1,535 mm and it is commonly considered as one of the largest historical bells in Poland. The total mass of all the three bells is close to 4,200 kilograms, so the dynamic actions produced by swinging have a great effect on the supporting structure and on the tower. However, the exact weight of the biggest bell isn't known, and for safety reasons it should be estimated in order to verify the real dynamic forces affecting the structure. The paper describes the method of Urban bell’s survey using terrestrial laser scanning and a total station as a task to estimate its weight by determining its volume.","PeriodicalId":42010,"journal":{"name":"Reports on Geodesy and Geoinformatics","volume":null,"pages":null},"PeriodicalIF":0.7,"publicationDate":"2017-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85699697","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. Filipiak-Kowszyk, A. Janowski, W. Kaminski, Karolina Makowska, J. Szulwic, K. Wilde
Abstract The study raises the issues concerning the automatic system designed for the monitoring of movement of controlled points, located on the roof covering of the Forest Opera in Sopot. It presents the calculation algorithm proposed by authors. It takes into account the specific design and location of the test object. High forest stand makes it difficult to use distant reference points. Hence the reference points used to study the stability of the measuring position are located on the ground elements of the sixmeter-deep concrete foundations, from which the steel arches are derived to support the roof covering (membrane) of the Forest Opera. The tacheometer used in the measurements is located in the glass body placed on a special platform attached to the steel arcs. Measurements of horizontal directions, vertical angles and distances can be additionally subject to errors caused by the laser beam penetration through the glass. Dynamic changes of weather conditions, including the temperature and pressure also have a significant impact on the value of measurement errors, and thus the accuracy of the final determinations represented by the relevant covariance matrices. The estimated coordinates of the reference points, controlled points and tacheometer along with the corresponding covariance matrices obtained from the calculations in the various epochs are used to determine the significance of acquired movements. In case of the stability of reference points, the algorithm assumes the ability to study changes in the position of tacheometer in time, on the basis of measurements performed on these points.
{"title":"The Geodetic Monitoring of the Engineering Structure – A Practical Solution of the Problem in 3D Space","authors":"D. Filipiak-Kowszyk, A. Janowski, W. Kaminski, Karolina Makowska, J. Szulwic, K. Wilde","doi":"10.1515/rgg-2016-0024","DOIUrl":"https://doi.org/10.1515/rgg-2016-0024","url":null,"abstract":"Abstract The study raises the issues concerning the automatic system designed for the monitoring of movement of controlled points, located on the roof covering of the Forest Opera in Sopot. It presents the calculation algorithm proposed by authors. It takes into account the specific design and location of the test object. High forest stand makes it difficult to use distant reference points. Hence the reference points used to study the stability of the measuring position are located on the ground elements of the sixmeter-deep concrete foundations, from which the steel arches are derived to support the roof covering (membrane) of the Forest Opera. The tacheometer used in the measurements is located in the glass body placed on a special platform attached to the steel arcs. Measurements of horizontal directions, vertical angles and distances can be additionally subject to errors caused by the laser beam penetration through the glass. Dynamic changes of weather conditions, including the temperature and pressure also have a significant impact on the value of measurement errors, and thus the accuracy of the final determinations represented by the relevant covariance matrices. The estimated coordinates of the reference points, controlled points and tacheometer along with the corresponding covariance matrices obtained from the calculations in the various epochs are used to determine the significance of acquired movements. In case of the stability of reference points, the algorithm assumes the ability to study changes in the position of tacheometer in time, on the basis of measurements performed on these points.","PeriodicalId":42010,"journal":{"name":"Reports on Geodesy and Geoinformatics","volume":null,"pages":null},"PeriodicalIF":0.7,"publicationDate":"2016-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82886513","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract The GNSS data evaluated from on observation of ASG EUPOS stations in the Sudety Mts. and in adjacent areas is analyzed by the author in the scope of disturbances in daily solutions that can be induced by tectonics stress. The daily position changes derived from GNSS data demonstrate the long or short term trends, which are affected by offsets of different nature. Author presents an analysis based on frequency of parameter – displacement vector azimuth. The aim of the analysis is to show statistical significance of observed small values of temporal displacements, which values are not normally distributed. There are “outliers” of the normal distribution of displacement azimuths, which values show a certain reproducibility, which corresponds to orientations of tectonic lines. That suggests small, short time movements along boundaries of horsts and grabens – a crustal-extension structure of the area. However derived results (values of displacements) are less than a limitation error, temporal distributions of coordinates are not random as usually data errors. So in author’s opinion the spatial-temporal evolution of horizontal displacements of ASG EUPOS stations in the Sudety Mts. and in adjacent areas are determined by expressions of underlying geological structures.
{"title":"Investigation on Reflection of Tectonic Pattern in ASG EUPOS Data in the Sudetes and Adjacent Areas","authors":"Z. Szczerbowski","doi":"10.1515/rgg-2016-0026","DOIUrl":"https://doi.org/10.1515/rgg-2016-0026","url":null,"abstract":"Abstract The GNSS data evaluated from on observation of ASG EUPOS stations in the Sudety Mts. and in adjacent areas is analyzed by the author in the scope of disturbances in daily solutions that can be induced by tectonics stress. The daily position changes derived from GNSS data demonstrate the long or short term trends, which are affected by offsets of different nature. Author presents an analysis based on frequency of parameter – displacement vector azimuth. The aim of the analysis is to show statistical significance of observed small values of temporal displacements, which values are not normally distributed. There are “outliers” of the normal distribution of displacement azimuths, which values show a certain reproducibility, which corresponds to orientations of tectonic lines. That suggests small, short time movements along boundaries of horsts and grabens – a crustal-extension structure of the area. However derived results (values of displacements) are less than a limitation error, temporal distributions of coordinates are not random as usually data errors. So in author’s opinion the spatial-temporal evolution of horizontal displacements of ASG EUPOS stations in the Sudety Mts. and in adjacent areas are determined by expressions of underlying geological structures.","PeriodicalId":42010,"journal":{"name":"Reports on Geodesy and Geoinformatics","volume":null,"pages":null},"PeriodicalIF":0.7,"publicationDate":"2016-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91164437","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：