Pub Date : 2014-07-10DOI: 10.1109/ICCICCT.2014.6993165
M. Bhuvaneswari, Dinesh Naik
MANET consists of the number of mobile nodes that form a wireless communication. MANETs are self configuring network where the nodes can move freely and randomly. It can dynamically join the network and leave the network at any time. It is widely used in industrial and commercial applications like vehicular communication, agricultural needs and disaster management, etc. There are studies based on routing protocols in MANETs to improve their quality and efficiency of the protocols. However, there may lot of research about routing protocols, always it lacks in security. The proposed algorithm uses public key cryptographic technique to make the protocol more secure. Cryptography provides more secure and optimal transactions.
{"title":"Secure optimal routing protocol in MANETs","authors":"M. Bhuvaneswari, Dinesh Naik","doi":"10.1109/ICCICCT.2014.6993165","DOIUrl":"https://doi.org/10.1109/ICCICCT.2014.6993165","url":null,"abstract":"MANET consists of the number of mobile nodes that form a wireless communication. MANETs are self configuring network where the nodes can move freely and randomly. It can dynamically join the network and leave the network at any time. It is widely used in industrial and commercial applications like vehicular communication, agricultural needs and disaster management, etc. There are studies based on routing protocols in MANETs to improve their quality and efficiency of the protocols. However, there may lot of research about routing protocols, always it lacks in security. The proposed algorithm uses public key cryptographic technique to make the protocol more secure. Cryptography provides more secure and optimal transactions.","PeriodicalId":6615,"journal":{"name":"2014 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT)","volume":"10 1","pages":"1320-1323"},"PeriodicalIF":0.0,"publicationDate":"2014-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75772711","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2014-07-10DOI: 10.1109/ICCICCT.2014.6993156
Swati Dhobaley, Prashant Bhopale
Biological Systems pertain to problems relative to disturbances, since various outputs (Proteins, Signals, Polymer Complexes etc.) are usually adulterated due to extrinsic and intrinsic uncertainties. Thus, standard estimation processes turns out significant in such scenarios where states/parameters could be estimated in order to accurately define the measurements. In this paper, a standard Extended Kalman filtering (EKF) approach has been implemented in order to estimate the states of a yeast galactose pathway, operating in constantly changing sources of nutrients.
{"title":"State estimation of yeast galactose pathway using extended Kalman filter","authors":"Swati Dhobaley, Prashant Bhopale","doi":"10.1109/ICCICCT.2014.6993156","DOIUrl":"https://doi.org/10.1109/ICCICCT.2014.6993156","url":null,"abstract":"Biological Systems pertain to problems relative to disturbances, since various outputs (Proteins, Signals, Polymer Complexes etc.) are usually adulterated due to extrinsic and intrinsic uncertainties. Thus, standard estimation processes turns out significant in such scenarios where states/parameters could be estimated in order to accurately define the measurements. In this paper, a standard Extended Kalman filtering (EKF) approach has been implemented in order to estimate the states of a yeast galactose pathway, operating in constantly changing sources of nutrients.","PeriodicalId":6615,"journal":{"name":"2014 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT)","volume":"30 1","pages":"1271-1274"},"PeriodicalIF":0.0,"publicationDate":"2014-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"73176418","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2014-07-10DOI: 10.1109/ICCICCT.2014.6993030
M. Kowsalya, Sumanth Srinivas Gaurav, B. T. Rao, M. Hareesh
This paper displays the elements demonstrating of variable speed wind turbine utilizing Matlab/ Simulink. To join the element demonstrating of DFIG under variable loads on variable wind speed model is given by gust, ramp, noise and step parts. The greatest power extracted from the wind Generator from Cp, β characteristics. The variable wind turbine is joined with DFIG. The yielded output of DFIG is connected to the grid.
{"title":"Modeling of DFIG for the variable speed wind turbine","authors":"M. Kowsalya, Sumanth Srinivas Gaurav, B. T. Rao, M. Hareesh","doi":"10.1109/ICCICCT.2014.6993030","DOIUrl":"https://doi.org/10.1109/ICCICCT.2014.6993030","url":null,"abstract":"This paper displays the elements demonstrating of variable speed wind turbine utilizing Matlab/ Simulink. To join the element demonstrating of DFIG under variable loads on variable wind speed model is given by gust, ramp, noise and step parts. The greatest power extracted from the wind Generator from Cp, β characteristics. The variable wind turbine is joined with DFIG. The yielded output of DFIG is connected to the grid.","PeriodicalId":6615,"journal":{"name":"2014 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT)","volume":"105 1","pages":"591-594"},"PeriodicalIF":0.0,"publicationDate":"2014-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74289290","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2014-07-10DOI: 10.1109/ICCICCT.2014.6993022
Dhiraj Gurale, S. P. Mohani, N. Nayek, Subrata Das
A cost effective pulse control system is being envisaged at SAMEER (Society for Applied Microwave Electronics Engineering and Research) for pulsed gyrotrons. The system has been designed using National Instruments LabVIEW. The user can set and control the repetition frequency and widths of magnet high-current and gun high-voltage pulses during the operation. This paper explains the design and development details.
{"title":"Pulse train generation for a pulsed gyrotron using LabVIEW","authors":"Dhiraj Gurale, S. P. Mohani, N. Nayek, Subrata Das","doi":"10.1109/ICCICCT.2014.6993022","DOIUrl":"https://doi.org/10.1109/ICCICCT.2014.6993022","url":null,"abstract":"A cost effective pulse control system is being envisaged at SAMEER (Society for Applied Microwave Electronics Engineering and Research) for pulsed gyrotrons. The system has been designed using National Instruments LabVIEW. The user can set and control the repetition frequency and widths of magnet high-current and gun high-voltage pulses during the operation. This paper explains the design and development details.","PeriodicalId":6615,"journal":{"name":"2014 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT)","volume":"2 1","pages":"550-553"},"PeriodicalIF":0.0,"publicationDate":"2014-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84257731","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2014-07-10DOI: 10.1109/ICCICCT.2014.6993150
R. Reenu, P. Reji
MANETS are mobile Ad Hoc networks which are capable of changing their current position with respect to other devices. They do not have a fixed architecture. This paper focuses on creating a virtual global MANET by including the connectivity of more number of mobile nodes which can be extended by the means of a central server system. The server acts as a bridge in communicating with different devices connected by the internet connectivity. It performs and enables data communication among the devices that are connected in order to form the MANET. The application also focuses on a control over the MANET. It can control the communication among the nodes. Role Privilege Access Control algorithm is used to limit the access of the data communicated and exchanged through MANET to authorized users. The paper focuses on developing a costless platform android application and a web interface which enables communication of devices communicating with each other using internet connectivity. It also assigns a server system which enables communication among devices that are present in two different locations. Location update is enabled in which the location details of each and every node that are connected in the MANET and call data management is also implemented and restricted to users according to their privileges.
{"title":"Simultaneous and dynamic location updatiion and call data synchronization in virtual global MANET","authors":"R. Reenu, P. Reji","doi":"10.1109/ICCICCT.2014.6993150","DOIUrl":"https://doi.org/10.1109/ICCICCT.2014.6993150","url":null,"abstract":"MANETS are mobile Ad Hoc networks which are capable of changing their current position with respect to other devices. They do not have a fixed architecture. This paper focuses on creating a virtual global MANET by including the connectivity of more number of mobile nodes which can be extended by the means of a central server system. The server acts as a bridge in communicating with different devices connected by the internet connectivity. It performs and enables data communication among the devices that are connected in order to form the MANET. The application also focuses on a control over the MANET. It can control the communication among the nodes. Role Privilege Access Control algorithm is used to limit the access of the data communicated and exchanged through MANET to authorized users. The paper focuses on developing a costless platform android application and a web interface which enables communication of devices communicating with each other using internet connectivity. It also assigns a server system which enables communication among devices that are present in two different locations. Location update is enabled in which the location details of each and every node that are connected in the MANET and call data management is also implemented and restricted to users according to their privileges.","PeriodicalId":6615,"journal":{"name":"2014 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT)","volume":"26 1","pages":"1237-1241"},"PeriodicalIF":0.0,"publicationDate":"2014-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81915330","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2014-07-10DOI: 10.1109/ICCICCT.2014.6992980
M. Yuvaraju, K. Rani
Wired network nodes have direct connection with the power source. But wireless sensor nodes depend on the on-board battery for power. Two different things can be done to increase the operational lifetime of the WSN. First one is efficient energy utilization. Second one is attachment of power generating devices. This paper proceeds with efficient energy utilization by proposing a new multipath routing protocol called tS EL(Secure Energy Efficient Load Balancing Multipath Routing Protocol with Transmission Power Adjustment). Single path routing protocols may lead to holes in the network due to improper load distribution among the nodes. Multi path routing protocols will lead to better load balancing than single path routing protocols. tSEL protocol selects node disjoint multiple paths and shares load among the paths effectively by following a new load sharing mechanism. tS EL provides security through RS A public key algorithm and MD5 hash algorithm.
有线网络节点与电源有直接连接。但无线传感器节点依靠机载电池供电。可以做两件不同的事情来增加WSN的运行寿命。首先是高效的能源利用。二是发电装置的附件。本文从高效能源利用出发，提出了一种新的多路径路由协议tS EL(Secure energy efficient Load Balancing multi - path routing protocol with Transmission Power Adjustment)。单路径路由协议可能由于节点间负载分配不当而导致网络出现漏洞。多路径路由协议将比单路径路由协议带来更好的负载均衡。tSEL协议采用一种新的负载共享机制，选择节点不连接的多条路径，并在路径之间有效地分担负载。tls安全协议通过rsa公钥算法和MD5哈希算法提供安全性。
{"title":"Secure energy efficient load balancing multipath routing protocol with power management for wireless sensor networks","authors":"M. Yuvaraju, K. Rani","doi":"10.1109/ICCICCT.2014.6992980","DOIUrl":"https://doi.org/10.1109/ICCICCT.2014.6992980","url":null,"abstract":"Wired network nodes have direct connection with the power source. But wireless sensor nodes depend on the on-board battery for power. Two different things can be done to increase the operational lifetime of the WSN. First one is efficient energy utilization. Second one is attachment of power generating devices. This paper proceeds with efficient energy utilization by proposing a new multipath routing protocol called tS EL(Secure Energy Efficient Load Balancing Multipath Routing Protocol with Transmission Power Adjustment). Single path routing protocols may lead to holes in the network due to improper load distribution among the nodes. Multi path routing protocols will lead to better load balancing than single path routing protocols. tSEL protocol selects node disjoint multiple paths and shares load among the paths effectively by following a new load sharing mechanism. tS EL provides security through RS A public key algorithm and MD5 hash algorithm.","PeriodicalId":6615,"journal":{"name":"2014 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT)","volume":"20 1","pages":"331-335"},"PeriodicalIF":0.0,"publicationDate":"2014-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84748501","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2014-07-10DOI: 10.1109/ICCICCT.2014.6993141
A. V. Rajesh, R. Ganesan
The most common type of defect with which babies are born is related to heart, nearly 1 out of every 100. A physician studies the electrical activity of the fetus's heart, by monitoring the fetal Electrocardiogram (fECG) collected at the time of pregnancy from mother's abdomen. Even though the signal acquisition and signal processing techniques has been made a great deal of progress, the extraction and analysis of Fetal ECG is still in its outset. Very low signal-to-noise ratio of the fetal ECG compared to the maternal ECG, is the biggest challenge faced by scientists working in this area. In this paper, we have reviewed a wide range of signal processing techniques for the extraction of fetal ECG, along with their shortcomings and advantages.
{"title":"Comprehensive study on fetal ECG extraction","authors":"A. V. Rajesh, R. Ganesan","doi":"10.1109/ICCICCT.2014.6993141","DOIUrl":"https://doi.org/10.1109/ICCICCT.2014.6993141","url":null,"abstract":"The most common type of defect with which babies are born is related to heart, nearly 1 out of every 100. A physician studies the electrical activity of the fetus's heart, by monitoring the fetal Electrocardiogram (fECG) collected at the time of pregnancy from mother's abdomen. Even though the signal acquisition and signal processing techniques has been made a great deal of progress, the extraction and analysis of Fetal ECG is still in its outset. Very low signal-to-noise ratio of the fetal ECG compared to the maternal ECG, is the biggest challenge faced by scientists working in this area. In this paper, we have reviewed a wide range of signal processing techniques for the extraction of fetal ECG, along with their shortcomings and advantages.","PeriodicalId":6615,"journal":{"name":"2014 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT)","volume":"18 1","pages":"1187-1192"},"PeriodicalIF":0.0,"publicationDate":"2014-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82413230","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2014-07-10DOI: 10.1109/ICCICCT.2014.6992928
R. Sivaramakrishnan, C. Arun
This work evaluates the performance of bio-inspired optimization algorithms in resolving occlusion in chromosomal images. The presence of occlusion hinders accurate identification and classification in automatic karyotyping and a manual intervention is needed to complete the procedure. For this reason, karyotyping is not completely automatic and a novel technique based on bio-inspired optimization algorithms is proposed to identify the individual chromosomes even in the presence of occlusion. The technique employs stochastic search algorithms including the Firefly algorithm (FA), Genetic algorithm (GA) and Particle swarm Optimization (PSO) in resolving occlusion, by starting with a random population of solutions from the image of occluded chromosomes and recursively doing operations borrowed from evolutionary methods and swarm intelligence, on the population. The hidden chromosomes are identified after a certain number of iterations. The technique performs well, even when 80% of the chromosome is occluded by the other. The performance of the stochastic search algorithms in resolving chromosomal occlusions is evaluated and FA gives superior results in identifying the occluded chromosomes.
{"title":"Performance evaluation of bio-inspired optimization algorithms in resolving chromosomal occlusions","authors":"R. Sivaramakrishnan, C. Arun","doi":"10.1109/ICCICCT.2014.6992928","DOIUrl":"https://doi.org/10.1109/ICCICCT.2014.6992928","url":null,"abstract":"This work evaluates the performance of bio-inspired optimization algorithms in resolving occlusion in chromosomal images. The presence of occlusion hinders accurate identification and classification in automatic karyotyping and a manual intervention is needed to complete the procedure. For this reason, karyotyping is not completely automatic and a novel technique based on bio-inspired optimization algorithms is proposed to identify the individual chromosomes even in the presence of occlusion. The technique employs stochastic search algorithms including the Firefly algorithm (FA), Genetic algorithm (GA) and Particle swarm Optimization (PSO) in resolving occlusion, by starting with a random population of solutions from the image of occluded chromosomes and recursively doing operations borrowed from evolutionary methods and swarm intelligence, on the population. The hidden chromosomes are identified after a certain number of iterations. The technique performs well, even when 80% of the chromosome is occluded by the other. The performance of the stochastic search algorithms in resolving chromosomal occlusions is evaluated and FA gives superior results in identifying the occluded chromosomes.","PeriodicalId":6615,"journal":{"name":"2014 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT)","volume":"26 1","pages":"48-54"},"PeriodicalIF":0.0,"publicationDate":"2014-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80202144","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2014-07-10DOI: 10.1109/ICCICCT.2014.6992957
M. Dev Anand, I. Rohit
This paper presents an analysis of a shell and tube heat exchanger, carried out using a finite element method for the optimal design. The main objective in any heat exchanger design is the estimation of the minimum heat transfer area required for a given heat duty, as it governs the overall cost of the heat exchanger. Step by step on designing the software is build first to make the work on calculation easy and simple by using finite element method. Numbers of configurations are possible with various design variables such as outer diameter, pitch, and length of the tubes; tube passes; baffle spacing; baffle cut etc. Hence the engineer needs an efficient strategy in searching for the global minimum. Here the shell and tube line utilizes bare tube (straight and u-tubes), helical low-fin outside, longitudinal fins (inside & outside are available). These exchangers are suitable for a variety of applications and are offered in fixed tube sheets or removable bundles. A finite element model to predict temperature distribution in heat exchanger is reported. The predictions are in good agreement with available analytical solutions. The model can be effectively used to analyze and design heat exchangers with complex flow arrangements for which no regular design procedure is available. Illustrations are provided to explain the application of the method for the analysis of shell and tube heat exchangers.
{"title":"Analysis of tubular heat exchangers for different flow patterns using finite element method","authors":"M. Dev Anand, I. Rohit","doi":"10.1109/ICCICCT.2014.6992957","DOIUrl":"https://doi.org/10.1109/ICCICCT.2014.6992957","url":null,"abstract":"This paper presents an analysis of a shell and tube heat exchanger, carried out using a finite element method for the optimal design. The main objective in any heat exchanger design is the estimation of the minimum heat transfer area required for a given heat duty, as it governs the overall cost of the heat exchanger. Step by step on designing the software is build first to make the work on calculation easy and simple by using finite element method. Numbers of configurations are possible with various design variables such as outer diameter, pitch, and length of the tubes; tube passes; baffle spacing; baffle cut etc. Hence the engineer needs an efficient strategy in searching for the global minimum. Here the shell and tube line utilizes bare tube (straight and u-tubes), helical low-fin outside, longitudinal fins (inside & outside are available). These exchangers are suitable for a variety of applications and are offered in fixed tube sheets or removable bundles. A finite element model to predict temperature distribution in heat exchanger is reported. The predictions are in good agreement with available analytical solutions. The model can be effectively used to analyze and design heat exchangers with complex flow arrangements for which no regular design procedure is available. Illustrations are provided to explain the application of the method for the analysis of shell and tube heat exchangers.","PeriodicalId":6615,"journal":{"name":"2014 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT)","volume":"112 1","pages":"202-207"},"PeriodicalIF":0.0,"publicationDate":"2014-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80746242","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2014-07-10DOI: 10.1109/ICCICCT.2014.6993103
Nidhi Gupta
This paper, deals with Thermal Analysis of Energy Efficient Clock Gated Arithmetic Logic Unit on FPGA for reduction of leakage power and total power consumption and it has been analyzed that there is reduction in Leakage Power when ambient temperature decreases from 50 degree Celsius to 20 degree Celsius. Virtex-6 is 40-nm FPGA, on which Thermal Analysis of Energy Efficient Clock Gated Arithmetic Logic Unit has been analyzed with device operating frequency is 1GHz. This reduction in leakage power is analyzed on arithmetic and logic unit with latch free clock gating technique and on arithmetic and logic unit with latch based clock gating technique. There is significant Leakage power reduction by varying ambient temperature. With Latch free clock gating technique in Low Power Arithmetic and Logic Unit the Contribution of leakage power was 1.327W, when Ambient Temperature is 50 degree Celsius, which is further reduced to 1.246W at 40 degree Celsius Ambient Temperature, 1.176W at 30 degree Celsius Ambient Temperature, 1.114W at 20 degree Celsius Ambient Temperature. With Latch based clock gating technique in Low Power Arithmetic and Logic Unit the Contribution of leakage power was 1.328W When Ambient Temperature is 50 degree Celsius, which is further reduced to 1.247W at 40 degree Celsius Ambient Temperature, 1.177W at 30 degree Celsius Ambient Temperature, 1.115W at 30 degree Celsius Ambient Temperature. So, there is reduction in leakage power in energy efficient arithmetic and logic unit.
{"title":"Thermal analysis of energy efficient clock gated arithmetic logic unit on FPGA","authors":"Nidhi Gupta","doi":"10.1109/ICCICCT.2014.6993103","DOIUrl":"https://doi.org/10.1109/ICCICCT.2014.6993103","url":null,"abstract":"This paper, deals with Thermal Analysis of Energy Efficient Clock Gated Arithmetic Logic Unit on FPGA for reduction of leakage power and total power consumption and it has been analyzed that there is reduction in Leakage Power when ambient temperature decreases from 50 degree Celsius to 20 degree Celsius. Virtex-6 is 40-nm FPGA, on which Thermal Analysis of Energy Efficient Clock Gated Arithmetic Logic Unit has been analyzed with device operating frequency is 1GHz. This reduction in leakage power is analyzed on arithmetic and logic unit with latch free clock gating technique and on arithmetic and logic unit with latch based clock gating technique. There is significant Leakage power reduction by varying ambient temperature. With Latch free clock gating technique in Low Power Arithmetic and Logic Unit the Contribution of leakage power was 1.327W, when Ambient Temperature is 50 degree Celsius, which is further reduced to 1.246W at 40 degree Celsius Ambient Temperature, 1.176W at 30 degree Celsius Ambient Temperature, 1.114W at 20 degree Celsius Ambient Temperature. With Latch based clock gating technique in Low Power Arithmetic and Logic Unit the Contribution of leakage power was 1.328W When Ambient Temperature is 50 degree Celsius, which is further reduced to 1.247W at 40 degree Celsius Ambient Temperature, 1.177W at 30 degree Celsius Ambient Temperature, 1.115W at 30 degree Celsius Ambient Temperature. So, there is reduction in leakage power in energy efficient arithmetic and logic unit.","PeriodicalId":6615,"journal":{"name":"2014 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT)","volume":"65 1","pages":"990-993"},"PeriodicalIF":0.0,"publicationDate":"2014-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76366116","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：