The Lévy flight was used in cuckoo search to achieve good optimization performance. Although the optimization performance of cuckoo search algorithm is good based on the Lévy flight some complicated mathematical operations should be used to realize the Lévy flight such as trigonometric function, gamma function and exponential functions, which limited the application of the cuckoo search algorithm especially there is high requirement about computation complex like in the embedded systems. The Lévy flight is replaced by a simple uniform distribution function based on the randomly chosen dimension and a local search method is applied to improve the optimization performance although the general structure of cuckoo search algorithm is not changed. The proposed cuckoo search algorithm is applied to several benchmark functions and the simulation results show the simplified cuckoo search algorithm can achieve better optimization performance than the original cuckoo search algorithm. Finally the simplified cuckoo search algorithm is applied to the spread spectrum radar Polly phase code design.
{"title":"A New Cuckoo Search and Its Application of Spread Spectrum Radar Polly Phase Code Design","authors":"Yanxia Sun","doi":"10.1109/ICISCE.2016.25","DOIUrl":"https://doi.org/10.1109/ICISCE.2016.25","url":null,"abstract":"The Lévy flight was used in cuckoo search to achieve good optimization performance. Although the optimization performance of cuckoo search algorithm is good based on the Lévy flight some complicated mathematical operations should be used to realize the Lévy flight such as trigonometric function, gamma function and exponential functions, which limited the application of the cuckoo search algorithm especially there is high requirement about computation complex like in the embedded systems. The Lévy flight is replaced by a simple uniform distribution function based on the randomly chosen dimension and a local search method is applied to improve the optimization performance although the general structure of cuckoo search algorithm is not changed. The proposed cuckoo search algorithm is applied to several benchmark functions and the simulation results show the simplified cuckoo search algorithm can achieve better optimization performance than the original cuckoo search algorithm. Finally the simplified cuckoo search algorithm is applied to the spread spectrum radar Polly phase code design.","PeriodicalId":6882,"journal":{"name":"2016 3rd International Conference on Information Science and Control Engineering (ICISCE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2016-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81896094","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In order to solve the problems emerged in the situation trying to combine conflict evidences using Dempster-Shafer theory, a new combination rule based on Dubois and Prade rule was raised. A method of using the new rule together with Bayesian Approximation was proposed to combine evidences from different bodies. Firstly the proposition transformation of discernment frame was discussed both in the open and closed world assumption. Secondly the effect of conflict was shown based on the Dempster-Shafer theory and Bayesian theorem. And finally the modified rule depending on the cardinal of set from different evidence bodies was proposed and was showed in the numerical example. Conclusion can be drawn from the example that the new combination rule reserves more information from the combined evidences and Bayesian Approximation reduces the number of focused elements, and using both of them is an effective and accurate method in evidence combination.
{"title":"Combination of Conflict Evidence Based on Bayesian Approximation","authors":"Xu Aiqiang, Menglei","doi":"10.1109/ICISCE.2016.193","DOIUrl":"https://doi.org/10.1109/ICISCE.2016.193","url":null,"abstract":"In order to solve the problems emerged in the situation trying to combine conflict evidences using Dempster-Shafer theory, a new combination rule based on Dubois and Prade rule was raised. A method of using the new rule together with Bayesian Approximation was proposed to combine evidences from different bodies. Firstly the proposition transformation of discernment frame was discussed both in the open and closed world assumption. Secondly the effect of conflict was shown based on the Dempster-Shafer theory and Bayesian theorem. And finally the modified rule depending on the cardinal of set from different evidence bodies was proposed and was showed in the numerical example. Conclusion can be drawn from the example that the new combination rule reserves more information from the combined evidences and Bayesian Approximation reduces the number of focused elements, and using both of them is an effective and accurate method in evidence combination.","PeriodicalId":6882,"journal":{"name":"2016 3rd International Conference on Information Science and Control Engineering (ICISCE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2016-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81963466","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Magnetoacoustic tomography with magnetic induction (MAT-MI) is a recently introduced method for imaging electrical impedance properties of biological tissue, which integrates classic electrical impedance tomography and ultrasonic technique. Image reconstruction is the key problem of MAT-MI. At present, there are certain problems for the image reconstruction methods which based on the divergence of Lorentz force. In this work, a novel reconstruction method based on the amplitude of Lorentz force instead of its divergence is proposed to avoid the singularity of the divergence of Lorentz force on the interface between two kinds of medium. Meanwhile, a two dimensional complex model was built, and preliminarily numerical simulations were carried out to evaluate the proposed method. With the rhetorical analysis and computational results, the proposed straightforward method for imaging electrical impedance properties would potentially be implemented more accurately for the MAT-MI system.
{"title":"A Novel Reconstruction Method of Magnetoacoustic Tomography with Magnetic Induction Based on the Amplitude of Lorentz Force","authors":"Jin Liu, Liang Mao, Dakun Lai, Guoqiang Liu","doi":"10.1109/ICISCE.2016.29","DOIUrl":"https://doi.org/10.1109/ICISCE.2016.29","url":null,"abstract":"Magnetoacoustic tomography with magnetic induction (MAT-MI) is a recently introduced method for imaging electrical impedance properties of biological tissue, which integrates classic electrical impedance tomography and ultrasonic technique. Image reconstruction is the key problem of MAT-MI. At present, there are certain problems for the image reconstruction methods which based on the divergence of Lorentz force. In this work, a novel reconstruction method based on the amplitude of Lorentz force instead of its divergence is proposed to avoid the singularity of the divergence of Lorentz force on the interface between two kinds of medium. Meanwhile, a two dimensional complex model was built, and preliminarily numerical simulations were carried out to evaluate the proposed method. With the rhetorical analysis and computational results, the proposed straightforward method for imaging electrical impedance properties would potentially be implemented more accurately for the MAT-MI system.","PeriodicalId":6882,"journal":{"name":"2016 3rd International Conference on Information Science and Control Engineering (ICISCE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2016-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85327638","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In order to carry out high speed and effective digital image processing, the use of FPGA is a relatively reasonable choice due to the large amount of data in digital image. Thus we need a careful simulation test to verify the correctness of the VHDL code to achieve the corresponding algorithm. It is difficult to achieve the digital image processing algorithm simulation if we rely on the traditional input waveform method. And if we write a test file (Testbench) to generate a number of test vectors, it would be very low efficiency for the simulation test. If we put the real digital image data into a file as test input, not only can the correctness of the algorithm is verified, but also the processed data can be written into the image file. Thus the result can be viewed through image in this directly way which gives us great convenience for designing and debugging. The TEXTIO package of VHDL language provides exactly the function of interaction with the disk file. So we can use it to achieve the digital image processing algorithm simulation. This paper uses the algorithm of image banalization as an example to introduce this method.
{"title":"Application of TEXTIO in the Simulation of FPGA Image Processing Algorithm","authors":"Shuyan Zhang, Juan Zhu, Chao Wang","doi":"10.1109/ICISCE.2016.59","DOIUrl":"https://doi.org/10.1109/ICISCE.2016.59","url":null,"abstract":"In order to carry out high speed and effective digital image processing, the use of FPGA is a relatively reasonable choice due to the large amount of data in digital image. Thus we need a careful simulation test to verify the correctness of the VHDL code to achieve the corresponding algorithm. It is difficult to achieve the digital image processing algorithm simulation if we rely on the traditional input waveform method. And if we write a test file (Testbench) to generate a number of test vectors, it would be very low efficiency for the simulation test. If we put the real digital image data into a file as test input, not only can the correctness of the algorithm is verified, but also the processed data can be written into the image file. Thus the result can be viewed through image in this directly way which gives us great convenience for designing and debugging. The TEXTIO package of VHDL language provides exactly the function of interaction with the disk file. So we can use it to achieve the digital image processing algorithm simulation. This paper uses the algorithm of image banalization as an example to introduce this method.","PeriodicalId":6882,"journal":{"name":"2016 3rd International Conference on Information Science and Control Engineering (ICISCE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2016-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80435396","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In recent years, research on language modeling for speech recognition has increasingly focused on the application of neural networks. However, the performance of neural network language models strongly depends on their architectural structure. Three competing concepts have been developed: Firstly, feed forward neural networks representing an n-gram approach, Secondly, recurrent neural networks that may learn context dependencies spanning more than a fixed number of predecessor words, Thirdly, the long short-term memory (LSTM) neural networks can fully exploits the correlation on a telephone conversation corpus. In this paper, we compare count models to feed forward, recurrent, and LSTM neural network in conversational telephone speech recognition tasks. Furthermore, we put forward a language model estimation method introduced the information of history sentences. We evaluate the models in terms of perplexity and word error rate, experimentally validating the strong correlation of the two quantities, which we find to hold regardless of the underlying type of the language model. The experimental results show that the performance of LSTM neural network language model is optimal in n-best lists re-score. Compared to the first pass decoding, the relative decline in average word error rate is 4.3% when using ten candidate results to re-score in conversational telephone speech recognition tasks.
{"title":"Comparison of Various Neural Network Language Models in Speech Recognition","authors":"Lingyun Zuo, Jian Liu, Xin Wan","doi":"10.1109/ICISCE.2016.195","DOIUrl":"https://doi.org/10.1109/ICISCE.2016.195","url":null,"abstract":"In recent years, research on language modeling for speech recognition has increasingly focused on the application of neural networks. However, the performance of neural network language models strongly depends on their architectural structure. Three competing concepts have been developed: Firstly, feed forward neural networks representing an n-gram approach, Secondly, recurrent neural networks that may learn context dependencies spanning more than a fixed number of predecessor words, Thirdly, the long short-term memory (LSTM) neural networks can fully exploits the correlation on a telephone conversation corpus. In this paper, we compare count models to feed forward, recurrent, and LSTM neural network in conversational telephone speech recognition tasks. Furthermore, we put forward a language model estimation method introduced the information of history sentences. We evaluate the models in terms of perplexity and word error rate, experimentally validating the strong correlation of the two quantities, which we find to hold regardless of the underlying type of the language model. The experimental results show that the performance of LSTM neural network language model is optimal in n-best lists re-score. Compared to the first pass decoding, the relative decline in average word error rate is 4.3% when using ten candidate results to re-score in conversational telephone speech recognition tasks.","PeriodicalId":6882,"journal":{"name":"2016 3rd International Conference on Information Science and Control Engineering (ICISCE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2016-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81415603","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This paper proposed a self-calibration algorithm for triaxial accelerometer. By analyzing the measurement error factors, the parametric model of accelerometer output was built. According to the principle that the modulus value of gravity vector at a fixed point is constant, the nonlinear state space model of calibration parameters was derived. Further, the iterated extended kalman filter was proposed to avoid the problem of high space complexity of off-line calibration algorithm. Through numerical simulation the efficiency of the proposed iterated extended kalman filter algorithm was illustrated. Simulation results also demonstrated the superior performance of the proposed algorithm over the Least squares algorithm in the application of accelerometer calibration.
{"title":"IEKF-based Self-Calibration Algorithm for Triaxial Accelerometer","authors":"Xin Lu, Zhong Liu","doi":"10.1109/ICISCE.2016.213","DOIUrl":"https://doi.org/10.1109/ICISCE.2016.213","url":null,"abstract":"This paper proposed a self-calibration algorithm for triaxial accelerometer. By analyzing the measurement error factors, the parametric model of accelerometer output was built. According to the principle that the modulus value of gravity vector at a fixed point is constant, the nonlinear state space model of calibration parameters was derived. Further, the iterated extended kalman filter was proposed to avoid the problem of high space complexity of off-line calibration algorithm. Through numerical simulation the efficiency of the proposed iterated extended kalman filter algorithm was illustrated. Simulation results also demonstrated the superior performance of the proposed algorithm over the Least squares algorithm in the application of accelerometer calibration.","PeriodicalId":6882,"journal":{"name":"2016 3rd International Conference on Information Science and Control Engineering (ICISCE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2016-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90834022","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This paper presents an adaptive hybrid genetic algorithm (AHGA) for VLSI standard cell placement problem which belongs to NP-hard combinatorial optimization problem. Based on the distinguishing feature of solution space of the problems with various scale and array or non-array placement style, we correspondingly use some adaptive strategies to greatly reduce the runtime. We make innovations in the adaptive strategies for constructing single crossover meme and accepting placement candidate. The experimental tests are performed on Peko suite3 and ISPD04 benchmark circuits, the results and comparisons show that these strategies are efficient.
{"title":"An Adaptive Hybrid Genetic Algorithm for VLSI Standard Cell Placement Problem","authors":"Xiongfeng Chen, Geng Lin, Jianli Chen, Wen-xing Zhu","doi":"10.1109/ICISCE.2016.45","DOIUrl":"https://doi.org/10.1109/ICISCE.2016.45","url":null,"abstract":"This paper presents an adaptive hybrid genetic algorithm (AHGA) for VLSI standard cell placement problem which belongs to NP-hard combinatorial optimization problem. Based on the distinguishing feature of solution space of the problems with various scale and array or non-array placement style, we correspondingly use some adaptive strategies to greatly reduce the runtime. We make innovations in the adaptive strategies for constructing single crossover meme and accepting placement candidate. The experimental tests are performed on Peko suite3 and ISPD04 benchmark circuits, the results and comparisons show that these strategies are efficient.","PeriodicalId":6882,"journal":{"name":"2016 3rd International Conference on Information Science and Control Engineering (ICISCE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2016-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90514749","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Xu Hongbo, Jiang Jianhua, Zeng Wenquan, He Yongjun
On the basis of traditional image transmission technology, the medical image transmission strategy based on bandwidth sensitivity and multi-resolution is proposed in mobile transmission environment. According to current network bandwidth, remaining battery power of mobile terminal equipment, screen resolution of mobile device supporting and real-time transmission requirements, the strategy selects the image replica with the optimal transmission resolution as the transfer object. Experiments show that the strategy is effective.
{"title":"Medical Image Transmission Strategy Based on Bandwidth Sensitivity and Multi-resolution","authors":"Xu Hongbo, Jiang Jianhua, Zeng Wenquan, He Yongjun","doi":"10.1109/ICISCE.2016.103","DOIUrl":"https://doi.org/10.1109/ICISCE.2016.103","url":null,"abstract":"On the basis of traditional image transmission technology, the medical image transmission strategy based on bandwidth sensitivity and multi-resolution is proposed in mobile transmission environment. According to current network bandwidth, remaining battery power of mobile terminal equipment, screen resolution of mobile device supporting and real-time transmission requirements, the strategy selects the image replica with the optimal transmission resolution as the transfer object. Experiments show that the strategy is effective.","PeriodicalId":6882,"journal":{"name":"2016 3rd International Conference on Information Science and Control Engineering (ICISCE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2016-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90523782","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
With the development of science and technology, implantable medical electronic devices are widely used in medical field, which provide new methods to human to defeat disease. With the requirements of implantable medical equipment to volume and portability, printed circuit board (PCB) coil in wireless energy transmission system application in space and finite height field with advantages of high precision, high consistency and easy to design and manufacture, the density function is greatly improved, these characteristics make it widely used in the field of magnetic resonance wireless power transmission. This paper use contrast experiment method, doing a large number of simulation experiment to double PCB coil according to 3D electromagnetic software (HFSS software), ensure that the PCB coils of electrical parameters, only changing the coil between the staggered distance, analyzing the adjacent two-layer PCB make effect on magnetic resonance frequency. Eventually reached the following conclusions: if the two-layer coils distances "s" is fixed, with the increase of displacement distance "a", the magnetic resonance frequency "f" also constantly increase, when it increases to a certain extent, it will tend to be stable.
{"title":"An Analysis on the Influence of the Staggered Distance between PCB Rectangular Coils to the Wireless Energy Transmission Efficiency","authors":"Wen-xiao Li, Bo Yin","doi":"10.1109/ICISCE.2016.180","DOIUrl":"https://doi.org/10.1109/ICISCE.2016.180","url":null,"abstract":"With the development of science and technology, implantable medical electronic devices are widely used in medical field, which provide new methods to human to defeat disease. With the requirements of implantable medical equipment to volume and portability, printed circuit board (PCB) coil in wireless energy transmission system application in space and finite height field with advantages of high precision, high consistency and easy to design and manufacture, the density function is greatly improved, these characteristics make it widely used in the field of magnetic resonance wireless power transmission. This paper use contrast experiment method, doing a large number of simulation experiment to double PCB coil according to 3D electromagnetic software (HFSS software), ensure that the PCB coils of electrical parameters, only changing the coil between the staggered distance, analyzing the adjacent two-layer PCB make effect on magnetic resonance frequency. Eventually reached the following conclusions: if the two-layer coils distances \"s\" is fixed, with the increase of displacement distance \"a\", the magnetic resonance frequency \"f\" also constantly increase, when it increases to a certain extent, it will tend to be stable.","PeriodicalId":6882,"journal":{"name":"2016 3rd International Conference on Information Science and Control Engineering (ICISCE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2016-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88709616","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Xin Ru, L. Peng, W. Shi, Weikang Zhou, Chun-Tai Shen
To meet the requirement of knitted fabric design and production using complicated jacquard circular knitting machine, an improved CAD/CAM system has been designed in this paper. The system has two subsystem, one named "pattern design subsystem" is for needle selectors control, and the other one named "action chain subsystem" is for +additional actuators control. In the pattern design subsystem, the color of a point in the image is corresponding to serial actions of several needle selections in this system. It is different with other CAD systems, in which the color of point presents the color of yarn. Through data analysis according to the designed image and set needle selector parameters, the data for needle selector control are prepared for machine running. Data compression is employed for taking use of storage space. If bad situation for knitting fabric production exists, like long floating line, related decomposition algorithms are needed. In the action chain subsystem, action control information is added as orders in a table named action chain. In this system, the form of mechanical action combination is used instead of a series of decomposed actuator actions. To ensure perfect coordination of actuator actions in one mechanical action, the advanced position of every actuator is able to set individually. Since there are flexible pattern design subsystem and easy-to-use action chain subsystem in this system, it performs well as a CAD/CAM system for complicated jacquard circular knitting machine.
{"title":"A CAD/CAM System for Complicated Jacquard Circular Knitting Machine","authors":"Xin Ru, L. Peng, W. Shi, Weikang Zhou, Chun-Tai Shen","doi":"10.1109/ICISCE.2016.11","DOIUrl":"https://doi.org/10.1109/ICISCE.2016.11","url":null,"abstract":"To meet the requirement of knitted fabric design and production using complicated jacquard circular knitting machine, an improved CAD/CAM system has been designed in this paper. The system has two subsystem, one named \"pattern design subsystem\" is for needle selectors control, and the other one named \"action chain subsystem\" is for +additional actuators control. In the pattern design subsystem, the color of a point in the image is corresponding to serial actions of several needle selections in this system. It is different with other CAD systems, in which the color of point presents the color of yarn. Through data analysis according to the designed image and set needle selector parameters, the data for needle selector control are prepared for machine running. Data compression is employed for taking use of storage space. If bad situation for knitting fabric production exists, like long floating line, related decomposition algorithms are needed. In the action chain subsystem, action control information is added as orders in a table named action chain. In this system, the form of mechanical action combination is used instead of a series of decomposed actuator actions. To ensure perfect coordination of actuator actions in one mechanical action, the advanced position of every actuator is able to set individually. Since there are flexible pattern design subsystem and easy-to-use action chain subsystem in this system, it performs well as a CAD/CAM system for complicated jacquard circular knitting machine.","PeriodicalId":6882,"journal":{"name":"2016 3rd International Conference on Information Science and Control Engineering (ICISCE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2016-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76170418","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：