Pub Date : 2020-06-01DOI: 10.12989/AER.2020.9.2.085
Ü. Gül, C. Acıkgoz, Kadir Özan
In this study, the decolorization of Evercion Blue P-GR (EBP) and Ostazin Black H-GRN (OBH) was investigated using white-rot fungi named as Trametes versicolor (T. versicolor) by Membrane Bioreactor (MBR) system. This study involved experiments employing synthetic textile wastewater in Membrane Bioreactor (MBR) system (170 ml), initially inoculated with a pure culture of fungi, but operated, other than controlling pH (4.5±0.2) and temperature (25±1oC), under non-sterile conditions. The effect of dye concentrations on fungal biodegradation was also investigated. The decolorization efficiencies were 98%, 90%, and 87% respectively, for EBP when the initial dye concentration of 50, 100, and 200 mg L-1 were used. However, the decolorization percentages for OBH dye were obtained 95% for 50 mg L-1 dye solution in 2 days and 66% for 100 mg L-1 dye solution in 5 days. Possible interactions between dye molecules and the fungal surface were confirmed by SEM, EDX, and FTIR analyses.
本研究采用膜生物反应器(MBR)系统研究了白腐真菌Trametes versicolor (T. versicolor)对Evercion Blue P-GR (EBP)和Ostazin Black H-GRN (OBH)的脱色效果。本研究采用合成纺织废水在膜生物反应器(MBR)系统(170 ml)中进行实验，最初接种纯培养的真菌，但除了控制pH(4.5±0.2)和温度(25±1oC)外，在非无菌条件下进行操作。研究了染料浓度对真菌生物降解的影响。当初始染料浓度为50、100和200 mg L-1时，EBP的脱色效率分别为98%、90%和87%。50 mg L-1染料溶液2天脱色率为95%，100 mg L-1染料溶液5天脱色率为66%。通过SEM、EDX和FTIR分析证实了染料分子与真菌表面可能存在的相互作用。
{"title":"Biodegradation of Evercion Blue P-GR and Ostazin Black H-GRN in synthetic textile wastewater by membrane bioreactor system using Trametes versicolor","authors":"Ü. Gül, C. Acıkgoz, Kadir Özan","doi":"10.12989/AER.2020.9.2.085","DOIUrl":"https://doi.org/10.12989/AER.2020.9.2.085","url":null,"abstract":"In this study, the decolorization of Evercion Blue P-GR (EBP) and Ostazin Black H-GRN (OBH) was investigated using white-rot fungi named as Trametes versicolor (T. versicolor) by Membrane Bioreactor (MBR) system. This study involved experiments employing synthetic textile wastewater in Membrane Bioreactor (MBR) system (170 ml), initially inoculated with a pure culture of fungi, but operated, other than controlling pH (4.5±0.2) and temperature (25±1oC), under non-sterile conditions. The effect of dye concentrations on fungal biodegradation was also investigated. The decolorization efficiencies were 98%, 90%, and 87% respectively, for EBP when the initial dye concentration of 50, 100, and 200 mg L-1 were used. However, the decolorization percentages for OBH dye were obtained 95% for 50 mg L-1 dye solution in 2 days and 66% for 100 mg L-1 dye solution in 5 days. Possible interactions between dye molecules and the fungal surface were confirmed by SEM, EDX, and FTIR analyses.","PeriodicalId":7287,"journal":{"name":"Advances in Environmental Research","volume":"42 1","pages":"85"},"PeriodicalIF":0.0,"publicationDate":"2020-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"77641769","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-06-01DOI: 10.12989/AER.2020.9.2.097
Pavithrapriya Srinivasan, R. Andimuthu, S. Ibrahim, Prasannavenkatesh Ramachandran, Easwari Rajkumar, P. Kandasamy
The indiscriminate growth in global population poses a threat to the world in handling and disposal of Municipal solid waste. Rapid urban growth increases the production, consumption and generation of Municipal solid waste which leads to a drastic change in the environment. The methane produced from the Municipal Solid waste accounts for up to 11% global anthropogenic emissions, which is a major cause for global warming. This study reports the methane emission estimation using IPCC default, TNO, LandGEM, EPER and close flux chamber from open dump yards at Perungudi and Kodungaiyur in Chennai, India. The result reveals that the methane emission using close flux chamber was in the range of 8.8 Gg/yr-11.3 Gg/yr and 6.1Gg/yr to 9.1 Gg/yr at Kodungaiyur and Perungudi dump yard respectively. The per capita waste generation was estimated based on waste generation and population. The waste generation potential was projected using linear regression model for the period 2017-2050. The trend of CH4 emission in the actual field measurement were increased every year, similarly the emission trend also increased in IPCC default method (mass balance approach), EPER Germany (zero order decay model) where as TNO and Land GEM (first order decay model) were decreased. The present study reveals that Kodungaiyur dump yard is more vulnerable to methane emission compared to Perungudi dump yard and has more potential in waste to energy conversion mechanisms than compare to Perungudi dump yard.
{"title":"Methane emission from municipal solid waste dumpsites: A case study of Chennai city in India","authors":"Pavithrapriya Srinivasan, R. Andimuthu, S. Ibrahim, Prasannavenkatesh Ramachandran, Easwari Rajkumar, P. Kandasamy","doi":"10.12989/AER.2020.9.2.097","DOIUrl":"https://doi.org/10.12989/AER.2020.9.2.097","url":null,"abstract":"The indiscriminate growth in global population poses a threat to the world in handling and disposal of Municipal solid waste. Rapid urban growth increases the production, consumption and generation of Municipal solid waste which leads to a drastic change in the environment. The methane produced from the Municipal Solid waste accounts for up to 11% global anthropogenic emissions, which is a major cause for global warming. This study reports the methane emission estimation using IPCC default, TNO, LandGEM, EPER and close flux chamber from open dump yards at Perungudi and Kodungaiyur in Chennai, India. The result reveals that the methane emission using close flux chamber was in the range of 8.8 Gg/yr-11.3 Gg/yr and 6.1Gg/yr to 9.1 Gg/yr at Kodungaiyur and Perungudi dump yard respectively. The per capita waste generation was estimated based on waste generation and population. The waste generation potential was projected using linear regression model for the period 2017-2050. The trend of CH4 emission in the actual field measurement were increased every year, similarly the emission trend also increased in IPCC default method (mass balance approach), EPER Germany (zero order decay model) where as TNO and Land GEM (first order decay model) were decreased. The present study reveals that Kodungaiyur dump yard is more vulnerable to methane emission compared to Perungudi dump yard and has more potential in waste to energy conversion mechanisms than compare to Perungudi dump yard.","PeriodicalId":7287,"journal":{"name":"Advances in Environmental Research","volume":"9 1","pages":"97-107"},"PeriodicalIF":0.0,"publicationDate":"2020-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86612271","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-03-01DOI: 10.12989/AER.2020.9.1.041
Bharti, J. S. Jangwan, Amrish Kumar, Vivek Kumar
Industrialization and urbanization are modern need and trends. Such trends affect the natural ecosystem of rivers. Indian rivers face such problems in a high ratio. The aim of this study is to investigate the cause and amount of pollution in a tributary river Krishni. Pre-monsoon sampling of Krishni river water was performed as per APHA standard. Water samples were collected from different sites of Krishni river. Physiochemical parameters as well as trace elements concentrations have been analysed and results were compared with BIS-2012, WHO-2017 and EPA-2001 recommendations. The presence of high BOD, COD, TDS and others physiochemical parameters along with heavy metals reveals that tributary is highly polluted owing to industrial and domestic discharge either directly or through drains. High values of these parameters are harmful for the ecological health of the river because it makes survival of aquatic flora and fauna at risk. On the basis of the results obtained by the present study, it was concluded that level of the pollution in river Krishni is at alarming phase, where if strong action for the rejuvenation of river not takes place, river becomes a dead pool.
{"title":"Water quality of an Indian tributary affected by various industrial effluents- a case study","authors":"Bharti, J. S. Jangwan, Amrish Kumar, Vivek Kumar","doi":"10.12989/AER.2020.9.1.041","DOIUrl":"https://doi.org/10.12989/AER.2020.9.1.041","url":null,"abstract":"Industrialization and urbanization are modern need and trends. Such trends affect the natural ecosystem of rivers. Indian rivers face such problems in a high ratio. The aim of this study is to investigate the cause and amount of pollution in a tributary river Krishni. Pre-monsoon sampling of Krishni river water was performed as per APHA standard. Water samples were collected from different sites of Krishni river. Physiochemical parameters as well as trace elements concentrations have been analysed and results were compared with BIS-2012, WHO-2017 and EPA-2001 recommendations. The presence of high BOD, COD, TDS and others physiochemical parameters along with heavy metals reveals that tributary is highly polluted owing to industrial and domestic discharge either directly or through drains. High values of these parameters are harmful for the ecological health of the river because it makes survival of aquatic flora and fauna at risk. On the basis of the results obtained by the present study, it was concluded that level of the pollution in river Krishni is at alarming phase, where if strong action for the rejuvenation of river not takes place, river becomes a dead pool.","PeriodicalId":7287,"journal":{"name":"Advances in Environmental Research","volume":"36 1","pages":"41-54"},"PeriodicalIF":0.0,"publicationDate":"2020-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82509625","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-03-01DOI: 10.12989/AER.2020.9.1.055
M. H. Hanif, M. A. Kamaruddin, F. A. Norashiddin, M. Zawawi
The problems with unsorted municipal waste are always associated with disposal issues as it requires a large area for landfilling or high energy used for incineration. In recent years, an autoclaving technique has been considered a promising approach which could minimize the volume of organic waste from being directly disposed or incinerated. In this work, an attempt was done to study the saccharification potential of organic residues under elevated temperature Thermal treatment involving hot water bath was applied to treat the organic residue ranging from 60oC to 100oC for 30 and 60 minutes. The result obtained showed an increasing trend for the concentration of glucose and carbohydrate. However, the result for lignocellulose content which contains various component includes extractive, holocellulose, hemicellulose, cellulose and lignin show variation. Based on the thermal treatment carried out, the result indicated that the trend of glucose and carbohydrate content. The highest percentage of glucose that can be obtained 978.602 µg/ml which could be obtained at 90oC at 60 minutes. The carbohydrate also shows an increasing trend with 0.234 mg/ml as the highest peak achieved at 80oC for 30 minutes treatment. However, it was found that the lignocellulose content varies with temperature and time. The statistical analysis was carried out using two-ways ANOVA shows an interaction effect between the independent variables (temperature and contact time) and the saccharification effects on the food wastes. The result shows a variation in the significant effect of independent variables on the changes in the composition of food waste.
{"title":"Digestate residues analysis under elevated heat regime by using DNS method","authors":"M. H. Hanif, M. A. Kamaruddin, F. A. Norashiddin, M. Zawawi","doi":"10.12989/AER.2020.9.1.055","DOIUrl":"https://doi.org/10.12989/AER.2020.9.1.055","url":null,"abstract":"The problems with unsorted municipal waste are always associated with disposal issues as it requires a large area for landfilling or high energy used for incineration. In recent years, an autoclaving technique has been considered a promising approach which could minimize the volume of organic waste from being directly disposed or incinerated. In this work, an attempt was done to study the saccharification potential of organic residues under elevated temperature Thermal treatment involving hot water bath was applied to treat the organic residue ranging from 60oC to 100oC for 30 and 60 minutes. The result obtained showed an increasing trend for the concentration of glucose and carbohydrate. However, the result for lignocellulose content which contains various component includes extractive, holocellulose, hemicellulose, cellulose and lignin show variation. Based on the thermal treatment carried out, the result indicated that the trend of glucose and carbohydrate content. The highest percentage of glucose that can be obtained 978.602 µg/ml which could be obtained at 90oC at 60 minutes. The carbohydrate also shows an increasing trend with 0.234 mg/ml as the highest peak achieved at 80oC for 30 minutes treatment. However, it was found that the lignocellulose content varies with temperature and time. The statistical analysis was carried out using two-ways ANOVA shows an interaction effect between the independent variables (temperature and contact time) and the saccharification effects on the food wastes. The result shows a variation in the significant effect of independent variables on the changes in the composition of food waste.","PeriodicalId":7287,"journal":{"name":"Advances in Environmental Research","volume":"21 1","pages":"55"},"PeriodicalIF":0.0,"publicationDate":"2020-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84888486","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-03-01DOI: 10.12989/AER.2020.9.1.001
M. Verma, A. K. Haritash
Pharmaceutically active compounds (PhACs) have become an environmental havoc in last few decades with reported cases of antibiotic resistant bacteria (ARB) and antibiotic resistant genes (ARGs), lethal effects over aquatic organisms, interference in natural decomposition of organic matter, reduced diversity of microbial communities in different environmental compartments, inhibition of growth of microbes resulting in reduced rate of nutrient cycling, hormonal imbalance in exposed organisms etc. Owing to their potential towards bioaccumulation and persistent nature, these compounds have longer residence time and activity in environment. The conventional technologies of wastewater treatment have got poor efficiency towards removal/degradation of PhACs and therefore, modern techniques with efficient, cost-effective and environment-friendly operation need to be explored. Advanced oxidation processes (AOPs) like Photocatalysis, Fenton oxidation, Ozonation etc. are some of the promising, viable and sustainable options for degradation of PhACs. Although energy/chemical or both are essentially required for AOPs, these methods target complete degradation/mineralization of persistent pollutants resulting in no residual toxicity. Considering the high efficiency towards degradation, non-toxic nature, universal viability and acceptability, AOPs have become a promising option for effective treatment of chemicals with persistent nature.
{"title":"Review of advanced oxidation processes (AOPs) for treatment of pharmaceutical wastewater","authors":"M. Verma, A. K. Haritash","doi":"10.12989/AER.2020.9.1.001","DOIUrl":"https://doi.org/10.12989/AER.2020.9.1.001","url":null,"abstract":"Pharmaceutically active compounds (PhACs) have become an environmental havoc in last few decades with reported cases of antibiotic resistant bacteria (ARB) and antibiotic resistant genes (ARGs), lethal effects over aquatic organisms, interference in natural decomposition of organic matter, reduced diversity of microbial communities in different environmental compartments, inhibition of growth of microbes resulting in reduced rate of nutrient cycling, hormonal imbalance in exposed organisms etc. Owing to their potential towards bioaccumulation and persistent nature, these compounds have longer residence time and activity in environment. The conventional technologies of wastewater treatment have got poor efficiency towards removal/degradation of PhACs and therefore, modern techniques with efficient, cost-effective and environment-friendly operation need to be explored. Advanced oxidation processes (AOPs) like Photocatalysis, Fenton oxidation, Ozonation etc. are some of the promising, viable and sustainable options for degradation of PhACs. Although energy/chemical or both are essentially required for AOPs, these methods target complete degradation/mineralization of persistent pollutants resulting in no residual toxicity. Considering the high efficiency towards degradation, non-toxic nature, universal viability and acceptability, AOPs have become a promising option for effective treatment of chemicals with persistent nature.","PeriodicalId":7287,"journal":{"name":"Advances in Environmental Research","volume":"52 1","pages":"1-17"},"PeriodicalIF":0.0,"publicationDate":"2020-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87603598","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-03-01DOI: 10.12989/AER.2020.9.1.065
N. Hashemi, R. Dabbagh, M. Noroozi, S. Baradaran
The potential use of Sargassum boveanum algae for the removal of uranium from aqueous solution has been studied by varying three independent parameters (pH, initial uranium ion concentration, S. boveanum dosage) using a central composite design (CCD) under response surface methodology (RSM). Batch mode experiments were performed in 20 experimental runs to determine the maximum metal adsorption capacity. In CCD design, the quantitative relationship between different levels of these parameters and heavy metal uptake (q) were used to work out the optimized levels of these parameters. The analysis of variance (ANOVA) of the proposed quadratic model revealed that this model was highly significant (R2 = 0.9940). The best set required 2.81 as initial pH(on the base of design of experiments method), 1.01 g/L S. boveanum and 418.92 mg/L uranium ion concentration within 180 min of contact time to show an optimum uranium uptake of 255 mg/g biomass. The biosorption process was also evaluated by Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models represented that the experimental data fitted to the Langmuir isotherm model of a suitable degree and showed the maximum uptake capacity of 500 mg/g. FTIR and scanning electron microscopy were used to characterize the biosorbent and implied that the functional groups (carboxyl, sulfate, carbonyl and amine) were responsible for the biosorption of uranium from aqueous solution. In conclusion, the present study showed that S. boveanum could be a promising biosorbent for the removal of uranium pollutants from aqueous solutions.
{"title":"Optimization of uranium biosorption in solutions by Sargassum boveanum using RSM method","authors":"N. Hashemi, R. Dabbagh, M. Noroozi, S. Baradaran","doi":"10.12989/AER.2020.9.1.065","DOIUrl":"https://doi.org/10.12989/AER.2020.9.1.065","url":null,"abstract":"The potential use of Sargassum boveanum algae for the removal of uranium from aqueous solution has been studied by varying three independent parameters (pH, initial uranium ion concentration, S. boveanum dosage) using a central composite design (CCD) under response surface methodology (RSM). Batch mode experiments were performed in 20 experimental runs to determine the maximum metal adsorption capacity. In CCD design, the quantitative relationship between different levels of these parameters and heavy metal uptake (q) were used to work out the optimized levels of these parameters. The analysis of variance (ANOVA) of the proposed quadratic model revealed that this model was highly significant (R2 = 0.9940). The best set required 2.81 as initial pH(on the base of design of experiments method), 1.01 g/L S. boveanum and 418.92 mg/L uranium ion concentration within 180 min of contact time to show an optimum uranium uptake of 255 mg/g biomass. The biosorption process was also evaluated by Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models represented that the experimental data fitted to the Langmuir isotherm model of a suitable degree and showed the maximum uptake capacity of 500 mg/g. FTIR and scanning electron microscopy were used to characterize the biosorbent and implied that the functional groups (carboxyl, sulfate, carbonyl and amine) were responsible for the biosorption of uranium from aqueous solution. In conclusion, the present study showed that S. boveanum could be a promising biosorbent for the removal of uranium pollutants from aqueous solutions.","PeriodicalId":7287,"journal":{"name":"Advances in Environmental Research","volume":"133 2 1","pages":"65-84"},"PeriodicalIF":0.0,"publicationDate":"2020-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74340249","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-03-01DOI: 10.12989/AER.2020.9.1.019
R. Kaur, P. Pandey
Urban heat island (UHI) is one of the most important climatic implications of urbanization and thus a matter of key concern for environmentalists of the world in the twenty-first century. The relationship between climate and urbanization has been better understood with the introduction of thermal remote sensing. So, this study is an attempt to understand the influence of urbanization on local temperature for a small developing city. The study focuses on the investigation of intensity of atmospheric and surface urban heat island for a small urbanizing district of Punjab, India. Landsat 8 OLI/TIRS satellite data and field observations were used to examine the spatial pattern of surface and atmospheric UHI effect respectively, for the month of April, 2018. The satellite data has been used to cover the larger geographical area while field observations were taken for simultaneous and daily temperature measurements for different land use types. The significant influence of land use/land cover (LULC) patterns on UHI effect was analyzed using normalized built-up and vegetation indices (NDBI, NDVI) that were derived from remote sensing satellite data. The statistical analysis carried out for land surface temperature (LST) and LULC indicators displayed negative correlation for LST and NDVI while NDBI and LST exhibited positive correlation depicting attenuation in UHI effect by abundant vegetation. The comparison of remote sensing and in-situ observations were also carried out in the study. The research concluded in finding both nocturnal and daytime UHI effect based on diurnal air temperature observations. The study recommends the urgent need to explore and impose effective UHI mitigation measures for the sustainable urban growth.
{"title":"Monitoring and spatio-temporal analysis of UHI effect for Mansa district of Punjab, India","authors":"R. Kaur, P. Pandey","doi":"10.12989/AER.2020.9.1.019","DOIUrl":"https://doi.org/10.12989/AER.2020.9.1.019","url":null,"abstract":"Urban heat island (UHI) is one of the most important climatic implications of urbanization and thus a matter of key concern for environmentalists of the world in the twenty-first century. The relationship between climate and urbanization has been better understood with the introduction of thermal remote sensing. So, this study is an attempt to understand the influence of urbanization on local temperature for a small developing city. The study focuses on the investigation of intensity of atmospheric and surface urban heat island for a small urbanizing district of Punjab, India. Landsat 8 OLI/TIRS satellite data and field observations were used to examine the spatial pattern of surface and atmospheric UHI effect respectively, for the month of April, 2018. The satellite data has been used to cover the larger geographical area while field observations were taken for simultaneous and daily temperature measurements for different land use types. The significant influence of land use/land cover (LULC) patterns on UHI effect was analyzed using normalized built-up and vegetation indices (NDBI, NDVI) that were derived from remote sensing satellite data. The statistical analysis carried out for land surface temperature (LST) and LULC indicators displayed negative correlation for LST and NDVI while NDBI and LST exhibited positive correlation depicting attenuation in UHI effect by abundant vegetation. The comparison of remote sensing and in-situ observations were also carried out in the study. The research concluded in finding both nocturnal and daytime UHI effect based on diurnal air temperature observations. The study recommends the urgent need to explore and impose effective UHI mitigation measures for the sustainable urban growth.","PeriodicalId":7287,"journal":{"name":"Advances in Environmental Research","volume":"6 1","pages":"19"},"PeriodicalIF":0.0,"publicationDate":"2020-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75013377","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-01-01DOI: 10.12989/AER.2020.9.2.135
Esra Turgut, Azize Alayli, H. Nadaroğlu
. Many industries, such as textiles, chemical refineries, leather, plastics and paper, use different dyes in various process steps. At the same time, these industrial sectors are responsible for discharging contaminants that are harmful and toxic to humans and microorganisms by introducing synthetic dyes into wastewater. Of these dyes, methylene blue dye, which is classified as basic dyes, is accepted as a model dye. For this reason, methylene blue dye was selected in the study and its removal from the water was studied. In this study, two efficient biosorbents were developed from chitosan and sunflower waste, an agro-industrial waste and modified using iron nanoparticles. The biosorption efficiency was evaluated for methylene blue (MB) dye removal from aqueous solution under various parameters such as treating agent, solution pH, biosorbent dosage, contact time, initial dye concentration and temperature. We investigated the kinetic properties of dye removal from water for Chitosan-Sunflower (CS), Chitosan-Sunflower-Nanoiron (CSN). the wavelength scanned, the maximum absorbance was determined as 660 nm. For the core shell biosorbents we obtained, we found that the optimum time for removal of MB from wastewater was 60 min. The pH of the best pH was determined as 5 in the studied pH. The most suitable temperature for the experiment was determined as 30°C. SEM-EDAX, TEM, XRD, and FTIR techniques were used to characterize biosorbents produced and modified in the experimental stage and to monitor the change of biosorbent after dye removal. The interactions of the paint with the surface used for removal were explained by these techniques. It was calculated that 80% of CS and 88% of CSN removed MB in optimum conditions. Also, the absorption of MB dye onto the surface was investigated by Langmiur and Frendlinch isotherms and it was determined from the results that the removal was more compatible with Langmiur isotherm.
{"title":"Preparation of chitosan, sunflower and nano-iron based core shell and its use in dye removal","authors":"Esra Turgut, Azize Alayli, H. Nadaroğlu","doi":"10.12989/AER.2020.9.2.135","DOIUrl":"https://doi.org/10.12989/AER.2020.9.2.135","url":null,"abstract":". Many industries, such as textiles, chemical refineries, leather, plastics and paper, use different dyes in various process steps. At the same time, these industrial sectors are responsible for discharging contaminants that are harmful and toxic to humans and microorganisms by introducing synthetic dyes into wastewater. Of these dyes, methylene blue dye, which is classified as basic dyes, is accepted as a model dye. For this reason, methylene blue dye was selected in the study and its removal from the water was studied. In this study, two efficient biosorbents were developed from chitosan and sunflower waste, an agro-industrial waste and modified using iron nanoparticles. The biosorption efficiency was evaluated for methylene blue (MB) dye removal from aqueous solution under various parameters such as treating agent, solution pH, biosorbent dosage, contact time, initial dye concentration and temperature. We investigated the kinetic properties of dye removal from water for Chitosan-Sunflower (CS), Chitosan-Sunflower-Nanoiron (CSN). the wavelength scanned, the maximum absorbance was determined as 660 nm. For the core shell biosorbents we obtained, we found that the optimum time for removal of MB from wastewater was 60 min. The pH of the best pH was determined as 5 in the studied pH. The most suitable temperature for the experiment was determined as 30°C. SEM-EDAX, TEM, XRD, and FTIR techniques were used to characterize biosorbents produced and modified in the experimental stage and to monitor the change of biosorbent after dye removal. The interactions of the paint with the surface used for removal were explained by these techniques. It was calculated that 80% of CS and 88% of CSN removed MB in optimum conditions. Also, the absorption of MB dye onto the surface was investigated by Langmiur and Frendlinch isotherms and it was determined from the results that the removal was more compatible with Langmiur isotherm.","PeriodicalId":7287,"journal":{"name":"Advances in Environmental Research","volume":"23 1","pages":"135-150"},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85837138","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2020-01-01DOI: 10.12989/AER.2020.9.2.109
V. Dhanya
Phenol is frequently present as the hazardous pollutant in petrochemical and pesticide industry wastewater. Because of its high toxicity and carcinogenic potential, a proper treatment is needed to reduce the hazards of phenol carrying effluent before being discharged into the environment. Phenol biodegradation with microbial consortium offers a very promising approach now a day’s. This study focused on the formulation of phenol degrading bacterial consortium with three bacterial isolates. The bacterial strains Bacillus cereus strain VCRC B540, Bacillus cereus strain BRL02-43 and Oxalobacteraceae strain CC11D were isolated from detergent contaminated soil by soil enrichment technique and was identified by 16s rDNA sequence analysis. Individual cultures were degrade 100 μl phenol in 72 hrs. The formulated bacterial consortium was very effective in degrading 250 μl of phenol at a pH 7 with in 48 hrs. The study further focused on the analysis of the products of biodegradation with Fourier Transform Infrared Spectroscopy (FT/IR) and Gas Chromatography-Mass Spectroscopy (GC-MS). The analysis showed the complete degradation of phenol and the production of Benzene di-carboxylic acid mono (2-ethylhexyl) ester and Ethane 1,2Diethoxyas metabolic intermediates. Biodegradation with the aid of microorganisms is a potential approach in terms of cost-effectiveness and elimination of secondary pollutions. The present study established the efficiency of bacterial consortium to degrade phenol. Optimization of biodegradation conditions and construction of a bioreactor can be further exploited for large scale industrial applications.
{"title":"Formulation of a novel bacterial consortium for the effective biodegradation of phenol","authors":"V. Dhanya","doi":"10.12989/AER.2020.9.2.109","DOIUrl":"https://doi.org/10.12989/AER.2020.9.2.109","url":null,"abstract":"Phenol is frequently present as the hazardous pollutant in petrochemical and pesticide industry wastewater. Because of its high toxicity and carcinogenic potential, a proper treatment is needed to reduce the hazards of phenol carrying effluent before being discharged into the environment. Phenol biodegradation with microbial consortium offers a very promising approach now a day’s. This study focused on the formulation of phenol degrading bacterial consortium with three bacterial isolates. The bacterial strains Bacillus cereus strain VCRC B540, Bacillus cereus strain BRL02-43 and Oxalobacteraceae strain CC11D were isolated from detergent contaminated soil by soil enrichment technique and was identified by 16s rDNA sequence analysis. Individual cultures were degrade 100 μl phenol in 72 hrs. The formulated bacterial consortium was very effective in degrading 250 μl of phenol at a pH 7 with in 48 hrs. The study further focused on the analysis of the products of biodegradation with Fourier Transform Infrared Spectroscopy (FT/IR) and Gas Chromatography-Mass Spectroscopy (GC-MS). The analysis showed the complete degradation of phenol and the production of Benzene di-carboxylic acid mono (2-ethylhexyl) ester and Ethane 1,2Diethoxyas metabolic intermediates. Biodegradation with the aid of microorganisms is a potential approach in terms of cost-effectiveness and elimination of secondary pollutions. The present study established the efficiency of bacterial consortium to degrade phenol. Optimization of biodegradation conditions and construction of a bioreactor can be further exploited for large scale industrial applications.","PeriodicalId":7287,"journal":{"name":"Advances in Environmental Research","volume":"65 1","pages":"109-121"},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90892051","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-01-01DOI: 10.12989/AER.2019.8.1.055
Anjali, S. Shrihari, B. Sunil
{"title":"Potential valorisation of ferrous slag in the treatment of water and wastewater: A review","authors":"Anjali, S. Shrihari, B. Sunil","doi":"10.12989/AER.2019.8.1.055","DOIUrl":"https://doi.org/10.12989/AER.2019.8.1.055","url":null,"abstract":"","PeriodicalId":7287,"journal":{"name":"Advances in Environmental Research","volume":"32 1","pages":"55-69"},"PeriodicalIF":0.0,"publicationDate":"2019-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88695873","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：