This article is about studying the placing direction effect of a piezoelectric sensor on the shoe insole in the GRF results. Where the sensors used in this research are in two directions, along and perpendicular to the foot midline. In the both cases the sensors were fixed on the shoe insole to sense the foot pressure. For the first set of sensors which are perpendicular to the foot midline the collected data has similar trend to the GRF collected from the force plate, as the small lateral strain in the shoe insole due to the patient weight and GRF is close to the GRF data collected from other measurement system. On the other hand, the collected data from the second set of sensors which are in a longitudinal direction with the foot midline will have different trend and values from the collected data from the force plate or any other GRF measurement system. This different in the results is due to the large longitudinal strain in the shoe insole due to the patient weight which produce dissimilar results from the force plate result data.
{"title":"Piezoelectric Fixing Direction effect on GRF test results in Wearable Shoe-Insole System","authors":"Ammar I. Kubba","doi":"10.29194/njes.25040152","DOIUrl":"https://doi.org/10.29194/njes.25040152","url":null,"abstract":"This article is about studying the placing direction effect of a piezoelectric sensor on the shoe insole in the GRF results. Where the sensors used in this research are in two directions, along and perpendicular to the foot midline. In the both cases the sensors were fixed on the shoe insole to sense the foot pressure. For the first set of sensors which are perpendicular to the foot midline the collected data has similar trend to the GRF collected from the force plate, as the small lateral strain in the shoe insole due to the patient weight and GRF is close to the GRF data collected from other measurement system. On the other hand, the collected data from the second set of sensors which are in a longitudinal direction with the foot midline will have different trend and values from the collected data from the force plate or any other GRF measurement system. This different in the results is due to the large longitudinal strain in the shoe insole due to the patient weight which produce dissimilar results from the force plate result data.","PeriodicalId":7470,"journal":{"name":"Al-Nahrain Journal for Engineering Sciences","volume":"41 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88962943","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
After long eras of socialism, wars and economic embargo when Iraqi people were severely exhausted, Iraq finally adopts free market economy. Its Gross Domestic Product (GDP) increased rapidly.The fortune was to flow in a proper frame of legislations to Iraqis.Since wealth needs time to grow for a person, and housing commodity is of high costs, then legislation were to be issued to organize flow of the national wealth to support private sector in housing finance.In respond, the Law of Iraqi Housing Bank (IHB) No. 32 was issued in 2011.This research is to solve the conflicts of the (IHB) Law and to support Iraqi legislators regarding this aspect. This research claims that this law should be revised by the Iraq Parliament. The research comes to help in this mission. The law of (IHB) should not conflict with The Iraqi Constitution.The range of this research is the “Status-in-force” Iraqi legislations only.It discusses the housing finance relations in various Iraqi legislations.
{"title":"Evaluating the Potentials of the Housing Fund Law to Support Housing Finance Policies in Iraq","authors":"Arshad Alanizi, Muna Alsayed, Alyaa Mahmood","doi":"10.29194/njes.2504a027","DOIUrl":"https://doi.org/10.29194/njes.2504a027","url":null,"abstract":"After long eras of socialism, wars and economic embargo when Iraqi people were severely exhausted, Iraq finally adopts free market economy. Its Gross Domestic Product (GDP) increased rapidly.The fortune was to flow in a proper frame of legislations to Iraqis.Since wealth needs time to grow for a person, and housing commodity is of high costs, then legislation were to be issued to organize flow of the national wealth to support private sector in housing finance.In respond, the Law of Iraqi Housing Bank (IHB) No. 32 was issued in 2011.This research is to solve the conflicts of the (IHB) Law and to support Iraqi legislators regarding this aspect. This research claims that this law should be revised by the Iraq Parliament. The research comes to help in this mission. The law of (IHB) should not conflict with The Iraqi Constitution.The range of this research is the “Status-in-force” Iraqi legislations only.It discusses the housing finance relations in various Iraqi legislations.","PeriodicalId":7470,"journal":{"name":"Al-Nahrain Journal for Engineering Sciences","volume":"101 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74819835","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In recent decades, many factors have emerged in the building design field, as the technology development after the industrial revolution has left many environmental problems affecting building environments and turning them into unhealthy ones. Also, the issues of consuming natural resources required innovative and modern solutions to address, which needed the guidance and focus of researchers, engineers, and many other relevant disciplines to find the best treatments to solve them. One of the essential treatments was using advanced smart technology to solve the environmental problems of buildings, such as providing thermal comfort and reducing energy consumption. The concept of adaptive smart envelopes is one of this manifestation of advanced technology in the field of building design characterized by interaction and adaptation to the surrounding environment through the application of many technologies which it works to improve its environmental efficiency. The research aim was to simulate the changes in the building environment, which is treated by covering the building with an adaptive smart envelope by using the Rhinoceros Grasshopper programme.
{"title":"Simulation of The Application of an Adaptive Smart Envelope to an Existing Building in Rhinoceros Grasshopper","authors":"Lina Qassim Al Rawi, Khalid Abdul Wahhab","doi":"10.29194/njes.2503a012","DOIUrl":"https://doi.org/10.29194/njes.2503a012","url":null,"abstract":"In recent decades, many factors have emerged in the building design field, as the technology development after the industrial revolution has left many environmental problems affecting building environments and turning them into unhealthy ones. Also, the issues of consuming natural resources required innovative and modern solutions to address, which needed the guidance and focus of researchers, engineers, and many other relevant disciplines to find the best treatments to solve them. One of the essential treatments was using advanced smart technology to solve the environmental problems of buildings, such as providing thermal comfort and reducing energy consumption.\u0000The concept of adaptive smart envelopes is one of this manifestation of advanced technology in the field of building design characterized by interaction and adaptation to the surrounding environment through the application of many technologies which it works to improve its environmental efficiency. The research aim was to simulate the changes in the building environment, which is treated by covering the building with an adaptive smart envelope by using the Rhinoceros Grasshopper programme.","PeriodicalId":7470,"journal":{"name":"Al-Nahrain Journal for Engineering Sciences","volume":"43 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90823758","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The experimental analysis is conducted under the Iraqi climate conditions to investigate the performance enhancement of a solar updraft tower system (SUTS) using the porous copper foam as an absorber plate and conventional absorber plate with absorber inclination angle of 18°. In the present work, a semicircular collector is divided into two identical quarter thermal collectors to become two identical SUTS. One of the quarter circular thermal collectors contains on the metal foam as an absorber plate, while the other quarter collector on the conventional flat copper absorber plate. In this study the air inlet height is changed of (3, 5, and 8) cm. The experimental tests carried out in Baghdad city (latitude 33.3° N). Results showed that the air inlet height variation caused to enhance the solar updraft tower performance. The highest values was recorded when the air inlet height is 3 cm using porous absorber compared to flat absorber plate. Copper material foam as an endothermic surface causes a marked decrease in average surface temperature of the plate. The maximum hourly thermal efficiency of solar collector was increased to about 41.6 % and the maximum enhancement of the power output to about 45.2 % compared with flat absorber plate.
{"title":"Experimental Analysis of Air Inlet Height Variation in a Solar Tower system Using Plate and Metal Foam Absorber","authors":"Sarmad A. Abdul Hussein, Mohammed A. Nima","doi":"10.29194/njes.25030120","DOIUrl":"https://doi.org/10.29194/njes.25030120","url":null,"abstract":"The experimental analysis is conducted under the Iraqi climate conditions to investigate the performance enhancement of a solar updraft tower system (SUTS) using the porous copper foam as an absorber plate and conventional absorber plate with absorber inclination angle of 18°. In the present work, a semicircular collector is divided into two identical quarter thermal collectors to become two identical SUTS. One of the quarter circular thermal collectors contains on the metal foam as an absorber plate, while the other quarter collector on the conventional flat copper absorber plate. In this study the air inlet height is changed of (3, 5, and 8) cm. The experimental tests carried out in Baghdad city (latitude 33.3° N). Results showed that the air inlet height variation caused to enhance the solar updraft tower performance. The highest values was recorded when the air inlet height is 3 cm using porous absorber compared to flat absorber plate. Copper material foam as an endothermic surface causes a marked decrease in average surface temperature of the plate. The maximum hourly thermal efficiency of solar collector was increased to about 41.6 % and the maximum enhancement of the power output to about 45.2 % compared with flat absorber plate.","PeriodicalId":7470,"journal":{"name":"Al-Nahrain Journal for Engineering Sciences","volume":"10 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82082186","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The study here under describes the impact of adding a nano-scaled ceramic particles on the mechanical and fatigue behaviors of aluminum matrix composites AMCs containing 0.5 ,1.0 ,1.5, and 2 % wt. of nano-scaled B4C and Al2O3 particles were dispersed in molten aluminum by the stir-casting process. Vickers, tensile, and fatigue devices were utilized to evaluate the mechanical behavior of composites in the fabrication process. The results show that increasing the weight percentage of nano-ceramic particles increased the hardness, maximum tensile stress, and fatigue strengths of the base alloy. Furthermore, all of the above behaviors of AMCs reinforced with B4C particles are better than those of AMCs reinforced with Al2O3 particles.
{"title":"Dynamic Modeling of Three Links Robot Manipulator (Open Chain) with Spherical Wrist","authors":"Salim A. Kako","doi":"10.29194/njes.25030114","DOIUrl":"https://doi.org/10.29194/njes.25030114","url":null,"abstract":"The study here under describes the impact of adding a nano-scaled ceramic particles on the mechanical and fatigue behaviors of aluminum matrix composites AMCs containing 0.5 ,1.0 ,1.5, and 2 % wt. of nano-scaled B4C and Al2O3 particles were dispersed in molten aluminum by the stir-casting process. Vickers, tensile, and fatigue devices were utilized to evaluate the mechanical behavior of composites in the fabrication process. The results show that increasing the weight percentage of nano-ceramic particles increased the hardness, maximum tensile stress, and fatigue strengths of the base alloy. Furthermore, all of the above behaviors of AMCs reinforced with B4C particles are better than those of AMCs reinforced with Al2O3 particles.","PeriodicalId":7470,"journal":{"name":"Al-Nahrain Journal for Engineering Sciences","volume":"144 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"77845877","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This research introduces a method of an electro-optic effect and electro-refractive effect that considers very imperative for high-speed optical communication systems. In this research, it presents way by a reduction the gap between the electrodes d, and this technique achieves to solve the problem of overlap for Mach-Zehnder interferometer MZI electro-optical switch base on lithium tantalite LiTaO3, also this technique suggests a model for analysis the effect parameters on the electro-optic overlap of the electro-optic switch as the ordinary positive changing of refractive index and a length of arm switch. This study achieves a better overlap by large positive changing refractive index with a suitable small length of arm about 8µm and low driving power at least 4V/µm. Also, for lithium tantalite LiTaO3, this research achieves a better performance for system using the near infrared wavelength.
{"title":"Improvement of Overlap for 2x2 MZI Electro-Optic Switch Based on Lithium Tantalite (LiTaO3)","authors":"Sadeq Adnan Hbeeb","doi":"10.29194/njes.25020091","DOIUrl":"https://doi.org/10.29194/njes.25020091","url":null,"abstract":"This research introduces a method of an electro-optic effect and electro-refractive effect that considers very imperative for high-speed optical communication systems. In this research, it presents way by a reduction the gap between the electrodes d, and this technique achieves to solve the problem of overlap for Mach-Zehnder interferometer MZI electro-optical switch base on lithium tantalite LiTaO3, also this technique suggests a model for analysis the effect parameters on the electro-optic overlap of the electro-optic switch as the ordinary positive changing of refractive index and a length of arm switch. This study achieves a better overlap by large positive changing refractive index with a suitable small length of arm about 8µm and low driving power at least 4V/µm. Also, for lithium tantalite LiTaO3, this research achieves a better performance for system using the near infrared wavelength.","PeriodicalId":7470,"journal":{"name":"Al-Nahrain Journal for Engineering Sciences","volume":"5 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-07-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75284039","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The research proposed a developed methodology for evaluation the system performance in uncertainty associated with traditional modelling methodology is focused on either load L or resistance R variability, but not both. A two-dimensional (2D) fuzzy set (traditional model), represent with the one dimension for universe of discourse (in x-direction) and the second dimension of his membership degree (in y-direction), is not full sufficient to handle both, load and resistance variation of system performance. The theoretical principle basis of this research is based on development of the three dimensional (3D) of fuzzy set that includes system performance variability in load and resistance from two dimensional. The proposed methodology (traditional model) extends the acceptance level of partial performance of system concept to a 3D-dimantion representation. This representation allows to capturing the changing of preferences of decision makers in load and resistance. The major objective of the research is to proposed the original methodology for evaluate system performance and management that is capable of; (a) addressing uncertainty caused by load and resistance variability and ambiguity; (b) integrating objective and subjective evaluation; and (c) assisting system performance management decision making based on a more detailed certainty evaluation of load and resistance variability. The study proposed two models for fuzzy reliability performance indexes: first traditional model included (I) 2D fuzzy reliability-vulnerability Rv index, (II) 2D fuzzy robustness Ro index; the second developed model (i) 3D fuzzy reliability-vulnerability Rv index, (ii) 3D fuzzy robustness Ro index; and comparing between them. These indexes have the capability of evaluating the operational performance of complex systems. Proposed methodology is illustrated by using the Al-Wathba Water Supply System (WWSS) as a case study.
{"title":"Three Dimensional Fuzzy Reliability for System Performance Evaluation","authors":"Kadhum A. Abed","doi":"10.29194/njes.25020081","DOIUrl":"https://doi.org/10.29194/njes.25020081","url":null,"abstract":"The research proposed a developed methodology for evaluation the system performance in uncertainty associated with traditional modelling methodology is focused on either load L or resistance R variability, but not both. A two-dimensional (2D) fuzzy set (traditional model), represent with the one dimension for universe of discourse (in x-direction) and the second dimension of his membership degree (in y-direction), is not full sufficient to handle both, load and resistance variation of system performance. The theoretical principle basis of this research is based on development of the three dimensional (3D) of fuzzy set that includes system performance variability in load and resistance from two dimensional. The proposed methodology (traditional model) extends the acceptance level of partial performance of system concept to a 3D-dimantion representation. This representation allows to capturing the changing of preferences of decision makers in load and resistance. The major objective of the research is to proposed the original methodology for evaluate system performance and management that is capable of; (a) addressing uncertainty caused by load and resistance variability and ambiguity; (b) integrating objective and subjective evaluation; and (c) assisting system performance management decision making based on a more detailed certainty evaluation of load and resistance variability.\u0000The study proposed two models for fuzzy reliability performance indexes: first traditional model included (I) 2D fuzzy reliability-vulnerability Rv index, (II) 2D fuzzy robustness Ro index; the second developed model (i) 3D fuzzy reliability-vulnerability Rv index, (ii) 3D fuzzy robustness Ro index; and comparing between them. These indexes have the capability of evaluating the operational performance of complex systems. Proposed methodology is illustrated by using the Al-Wathba Water Supply System (WWSS) as a case study.","PeriodicalId":7470,"journal":{"name":"Al-Nahrain Journal for Engineering Sciences","volume":"62 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-07-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90901203","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Mohammed M. Namaa, Zaynab I. Qasim, Karim H. Ibrahim AlHelo
Open graded asphalt mixture is becoming more widespread where it is applied for various purposes, e.g. drainage of rainwater effectivity, traffic safety (high skid resistance), and controlling pollution noise. However, it has many other disadvantages, of which low stability, high stripping, and moisture sensitivity. The research aims to study the effect of styrene butadiene styrene SBS addition on the volumetric and mechanical properties of open graded mixture. In this research one type of aggregate with gradation (12.5 mm NMAS), asphalt of penetration grade (40/50), and cement as filler were used. Optimum asphalt content was selected based on the criteria of air voids content, asphalt drain down, permeability, and abrasion resistance (for aged and un-aged) samples. Other properties of open-graded mixtures, such as indirect tensile strength (ITS), moisture susceptibility, Marshall stability and flow were evaluated. The results show that addition of polymer (SBS) leads to an enhancement in the properties of the modified mixtures. There is an improvement in Marshall parameters. Also, a slight decreasing is noticed for permeability and air voids. For Cantabro abrasion loss (aging and un-aging condition), the abrasion resistance is increased, the drain down of asphalt is decreased from original mixture by addition of SBS. Finally, the moisture sensitivity is improved indicating that modified mixes becomes more resistant to water damage.
开级配沥青混合料正变得越来越广泛，它被应用于各种目的，例如雨水的排水效率，交通安全(高防滑性)，以及控制污染噪音。然而，它有许多其他的缺点，稳定性低，高剥离和水分敏感性。研究丁二烯苯乙烯SBS的加入对开级配料体积性能和力学性能的影响。本研究采用一种级配(12.5 mm NMAS)骨料，40/50渗透级配沥青，水泥作为填料。最佳沥青含量是根据空气空洞含量、沥青排空量、渗透性和耐磨性(老化和未老化)样品的标准来选择的。对开级配混合物的其他性能，如间接抗拉强度(ITS)、湿敏感性、马歇尔稳定性和流动性进行了评估。结果表明，聚合物(SBS)的加入使改性混合物的性能得到提高。马歇尔参数有了改进。此外，透气性和空隙率也略有下降。在Cantabro磨损损失(老化和未老化)条件下，SBS的加入提高了沥青的耐磨性，降低了沥青的排污量。最后，改性后的混合料对水的敏感性提高，表明改性后的混合料具有更强的抗水破坏能力。
{"title":"Effect of Styrene Butadiene Styrene on Properties of Open-Graded Asphalt Concrete Mixtures","authors":"Mohammed M. Namaa, Zaynab I. Qasim, Karim H. Ibrahim AlHelo","doi":"10.29194/njes.25020067","DOIUrl":"https://doi.org/10.29194/njes.25020067","url":null,"abstract":"Open graded asphalt mixture is becoming more widespread where it is applied for various purposes, e.g. drainage of rainwater effectivity, traffic safety (high skid resistance), and controlling pollution noise. However, it has many other disadvantages, of which low stability, high stripping, and moisture sensitivity. The research aims to study the effect of styrene butadiene styrene SBS addition on the volumetric and mechanical properties of open graded mixture. In this research one type of aggregate with gradation (12.5 mm NMAS), asphalt of penetration grade (40/50), and cement as filler were used. Optimum asphalt content was selected based on the criteria of air voids content, asphalt drain down, permeability, and abrasion resistance (for aged and un-aged) samples. Other properties of open-graded mixtures, such as indirect tensile strength (ITS), moisture susceptibility, Marshall stability and flow were evaluated. The results show that addition of polymer (SBS) leads to an enhancement in the properties of the modified mixtures. There is an improvement in Marshall parameters. Also, a slight decreasing is noticed for permeability and air voids. For Cantabro abrasion loss (aging and un-aging condition), the abrasion resistance is increased, the drain down of asphalt is decreased from original mixture by addition of SBS. Finally, the moisture sensitivity is improved indicating that modified mixes becomes more resistant to water damage.","PeriodicalId":7470,"journal":{"name":"Al-Nahrain Journal for Engineering Sciences","volume":"67 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-07-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75801017","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
With the development of manufacturing techniques, the demands have increased on tools with flexible components that can produce parts with different shapes and sizes only by replacing the rigid part of these tools, since the flexible part can match the required geometry. This study is focused on effects of rubber hardness and sheet thickness on the springback developed on the produced parts. Silicone rubber with three hardness (40,60 ,80) Shore A hardness scale was used. The material of workpiece was Aluminum (3003) with three different thicknesses of (0.8,1,1.2) mm and three holding time of (0,10,20) seconds. The results demonstrate that, the springback decreases with any increase in the rubber hardness or sheet thickness. In addition, the holding time showed a significant effect only with a harder rubber.
{"title":"Springback Analysis in Bending of V-Section Using Deformable Die","authors":"Jalil Shukur, Waqass Khudhir, M. Abbood","doi":"10.29194/njes.25020096","DOIUrl":"https://doi.org/10.29194/njes.25020096","url":null,"abstract":"With the development of manufacturing techniques, the demands have increased on tools with flexible components that can produce parts with different shapes and sizes only by replacing the rigid part of these tools, since the flexible part can match the required geometry. This study is focused on effects of rubber hardness and sheet thickness on the springback developed on the produced parts. Silicone rubber with three hardness (40,60 ,80) Shore A hardness scale was used. The material of workpiece was Aluminum (3003) with three different thicknesses of (0.8,1,1.2) mm and three holding time of (0,10,20) seconds. The results demonstrate that, the springback decreases with any increase in the rubber hardness or sheet thickness. In addition, the holding time showed a significant effect only with a harder rubber.","PeriodicalId":7470,"journal":{"name":"Al-Nahrain Journal for Engineering Sciences","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-07-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81605294","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Non-dispersive near-infrared technique is widely used nowadays for the detection of gases, especially in harsh environments. In this study, an optical gas cell was designed for oxygenator exhaust capnometry. A computer-based simulation was used for the analysis of air flows for model selection. ANSYS Discovery 2020 R2 was used for model simulation. The gas flow cells were tested using a custom-made gas rig to measure the fraction absorbance of carbon dioxide gas at the detector. Two gases were used, nitrogen gas as a reference gas (0%) and 9% carbon dioxide. Three gas cells with the following optical path lengths were tested: 31mm, 36mm, and 40mm. The results showed that all gas flow cells produced laminar flow and small pressure drop across the inlet and outlet of the cell (11~12 Pa). Further, the minimum velocity is obtained in the 40mm gas flow sensor and it is located at the gas outlet path away from the effective optical gas path. The simulation and experimental results indicate that the gas flow cell of 40mm optical path length is more suitable for the intended application as it offers a maximum effective absorption path compared to the stagnation areas, and as a result, it provides the maximum fraction absorbance.
{"title":"Non-Dispersive Near Infrared Gas Flow Cell Design for Oxygenator-Exhaust Capnometry","authors":"B. A. Faihan, Z. Al-Dahan, Hussein H. Alzubeidy","doi":"10.29194/njes.25020076","DOIUrl":"https://doi.org/10.29194/njes.25020076","url":null,"abstract":"Non-dispersive near-infrared technique is widely used nowadays for the detection of gases, especially in harsh environments. In this study, an optical gas cell was designed for oxygenator exhaust capnometry. A computer-based simulation was used for the analysis of air flows for model selection. ANSYS Discovery 2020 R2 was used for model simulation. The gas flow cells were tested using a custom-made gas rig to measure the fraction absorbance of carbon dioxide gas at the detector. Two gases were used, nitrogen gas as a reference gas (0%) and 9% carbon dioxide. Three gas cells with the following optical path lengths were tested: 31mm, 36mm, and 40mm. The results showed that all gas flow cells produced laminar flow and small pressure drop across the inlet and outlet of the cell (11~12 Pa). Further, the minimum velocity is obtained in the 40mm gas flow sensor and it is located at the gas outlet path away from the effective optical gas path. The simulation and experimental results indicate that the gas flow cell of 40mm optical path length is more suitable for the intended application as it offers a maximum effective absorption path compared to the stagnation areas, and as a result, it provides the maximum fraction absorbance.","PeriodicalId":7470,"journal":{"name":"Al-Nahrain Journal for Engineering Sciences","volume":"37 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-07-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90238879","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：