Brazilian oral research最新文献

This study aimed to evaluate the pulp response to F18 and cobalt-doped F18 bioglass (F18Co) in comparison with calcium hydroxide (CH) after pulp capping. The maxillary first molars of 48 rats were divided into F18, F18Co, CH, and control (no intervention) groups. The pulp was exposed, the materials were placed, and the teeth were capped. After 7 and 15 days, the animals were euthanized for pulp evaluation and interleukin (IL) expression determination. Statistical analysis was carried out using the SigmaPlot® program (Systat Software Inc., for Windows, version 12.0). The data obtained in the analyses were subjected to the non-parametric Kruskal-Wallis test, followed by Dunn's test. For all tests, statistical significance was set at p < 0.05. The CH group exhibited mild to moderate inflammation, whereas the bioglass groups displayed moderate to severe inflammation, indicating a notable difference between the control and bioglass groups. At 7 days, both the CH and most of the bioglass specimens showed moderate disorganization. On day 15, CH displayed mildto-moderate disorganization, whereas F18 and F18Co exhibited significantly more moderate-to-severe disorganization. There were no significant differences in IL-6 and IL-10 expressions between groups at 7 days, but a noteworthy increase in IL-1β was observed in both CH and F18. After 15 days, there was a greater expression of IL-6 and IL-1β in the bioglass groups. No significant IL-10 expression was observed. Bioglass performed less effectively than CH when in direct contact with the pulp tissue.

The objective of this study was to evaluate the fractal dimension (FD) and lacunarity of the mandibular bone, comparing patients with and without osteoradionecrosis (ORN). In a cross-sectional study with a control group, 25 patients were included and divided into a case group (with ORN, n = 14) and a control group (without ORN, n = 11). A digital panoramic radiograph taken after the end of radiotherapy (RT) was evaluated for each patient. FD and lacunarity of the mandibular bone were determined using ImageJ software. Descriptive, bivariate, and ROC curve analyses were performed. Cohen's d effect sizes were calculated. Significance was established at p < 0.05. The mean FD and lacunarity values were not significantly different between the groups. The area under the curve for FD and lacunarity were 0.579 and 0.661, respectively. The cut-off point for FD was ≤1.1714 and for lacunarity, > 0.3821, correctly classifying the majority of cases and controls. Most participants in the case group (63.6%) had a FD ≤ 1.1714 and the majority of participants in the control group (63.6%) had a FD >1.1714 (p = 0.395). For lacunarity, most individuals in the case group (72.7%) had a value > 0.3821 and most participants in the control group (63.6%) had a value ≤ 0.3821 (p = 0.198). In conclusion, the FD and lacunarity values did not show statistically significant differences between patients with and without ORN. However, the moderate and large magnitude of the effects seem to indicate that the results may be clinically relevant.

Poly(methyl methacrylate) (PMMA) materials are highly susceptible to microbial colonization, predisposing patients to oral infections. To address this concern, we loaded PMMA samples with montmorillonite clay (MMT), a crystalline nanoparticle, in combination with chlorhexidine (CHX) or metronidazole (MET) targeting improved antimicrobial action. PMMA samples were prepared with or without MMT loaded with either CHX or MET, establishing the following groups: control (acrylic resin without the addition of nanoparticles), MMT/CHX (acrylic resin with 5% by weight of MMT loaded with CHX), and MMT/MET (acrylic resin with 5% by weight of MMT loaded with MET). Mechanical properties such flexural strength, flexural modulus, and Knoop hardness were evaluated using a universal testing machine. Antimicrobial efficacy was assessed via agar diffusion tests against Enterococcus faecalis and Porphyromonas gingivalis. The addition of MMT loaded with CHX did not affect the flexural strength and flexural modulus of PMMA compared to the control group (p > 0.05). However, MMT/MET reduced all mechanical properties of PMMA (p < 0.05). Both loaded-PMMA materials demonstrated antibacterial activity against E. faecalis but not against P. gingivalis. In conclusion, the incorporation of MMT/CHX into acrylic resin appears to be the most promising approach to combat microbial colonization while preserving PMMA mechanical properties. Future research should focus on optimizing material characteristics to enhance antimicrobial properties, paving the way for clinical applicability.

This cross-sectional study aimed to investigate the association between anterior dental caries and the predominant type of breathing in preschoolers. The research involved a sample of 257 children aged between 3 and 5 years, who were enrolled in public daycare centers and preschools in the city of Diamantina, MG, Brazil. A questionnaire was applied to parents/guardians to collect sociodemographic data, habits, oral health, and a dietary diary used to calculate the Sucrose Consumption Index. The predominant type of breathing, whether nasal or through the mouth, was determined through direct observation. Dental caries was assessed using the International Caries Detection and Assessment System (ICDAS). Descriptive analyses and the Poisson regression were conducted to analyze the data. The results revealed a higher prevalence of anterior dental caries among children who predominantly breathed through the mouth (PR = 1.57; 95%CI: 1.01-2.46; p = 0.047), who exhibited a higher frequency of sucrose consumption (PR = 4.02; 95%CI: 2.03-7.95; p < 0.001), and had mothers with lower educational levels (PR = 1.53; 95%CI: 1.01-2.32; p = 0.043). Pacifier use was associated with a lower prevalence of anterior dental caries (PR = 0.57; 95%CI: 0.34-0.96; p = 0.035). In conclusion, this investigation demonstrated an association between carious lesions in the anterior teeth and predominantly mouth breathing in preschoolers.

This study evaluated the effect of different occlusal surface finishes (glaze and silica glass infiltration) on surface characteristics and fatigue behavior of partially stabilized zirconia (PSZ) plates adhesively bonded onto epoxy resin discs. PSZ disc specimens (n = 15; Katana blocks STML, Kuraray Noritake Dental) were produced (Ø = 10 mm; thickness = 1.2 mm) and allocated into 3 groups: As sintered (S), silica glass infiltration (SGI), and glaze application (G). The PSZ intaglio surface was air-abraded with 50-µm alumina powder followed by bonding agent application. All produced PSZ were adhesively cemented onto dentin analogue discs made of epoxy resin material (Ø = 10 mm; thickness = 2 mm). Step stress fatigue test was performed (load ranging from 200 to 1800 N; step size 100 N and 10,000 cycles; 20 Hz). The topographic, microstructural, and fractographic analyses were performed by scanning electron microscopy. Results: No statistically significant difference in fatigue behavior was detected among the groups. All failures started at the bonding surface. Silica glass-infiltration and glaze layer application provided a smoothing effect, while the sintered group had a surface with grooves. The occlusal surface finishing method (silica glass infiltration or glazing) had no deleterious effect on fatigue behavior of adhesively bonded PSZ plates.

Obstructive sleep apnea (OSA) causes intermittent hypoxia, increased production of reactive oxygen species, and inflammation, which may elevate morbidity and mortality from cardiovascular disease. The objective of the present study was to investigate the effect of the intraoral appliance (IOA) as a treatment for OSA when it comes to the modulation of inflammatory markers and oxidative damage in elderly individuals. This "before and after" clinical trial included 9 patients diagnosed with OSA recruited from a multicenter randomized clinical trial study that evaluated the treatment with IOA for 60 days. Demographic and anthropometric variables, apnea and hypopnea index (AHI), and oxygen desaturation index (ODI) were collected by type III polysomnography, Epworth Sleepiness Scale, and inflammatory and oxidative damage markers (interleukin 6 (1L-6); tumor necrosis factor α (TNF-α); interleukin 10 (IL-10); thiobarbituric acid reactive substances (TBARS); total thiols; advanced oxidation protein products (AOPP), and nitric oxide (NO)). Shapiro-Wilk test, paired t-test and Pearson's correlation tests were used to analyze the results, respectively (α=0.05). The sample had a mean age of 71.86 ± 4.63 years, the majority were women (55.55%), and had a significant reduction in AHI (p=0.003), ODI (p=0.038), IL-10 (p=0.0001), AOPP (p=0.038) and TBARS levels (p=0.0001). There was a significant correlation between IL-10 and NO (r=0.855) and between TBARS and IL-6 (r=0.669), both after treatment. This study demonstrated that treating elderly patients with OSA using an IOA for 60 days reduces oxidative damage through the modulation of AOPP and TBARS.

The objective of this in vitro study was to assess the efficacy of CaneCPI-5, either alone or in combination with various concentrations of sodium trimetaphosphate (TMP) in protecting against initial enamel erosion. A total of 135 bovine enamel specimens were prepared and categorized into nine groups (n/group=15) according to the following treatments: Deionized water; Commercial solution (Elmex Erosion ProtectionTM); 0.1 mg/mL CaneCPI-5; 0.5% TMP; 1.0% TMP; 3.0% TMP; 0.1 mg/mL CaneCPI-5+0.5% TMP; 0.1 mg/mL CaneCPI-5+1.0%TMP; and 0.1 mg/mL CaneCPI-5+3.0%TMP. The specimens were treated with the respective solutions for 2 h, followed by acquired enamel pellicle formation for 2 h and exposure to 0.65% citric acid (CA) for 1 min. These procedures were repeated once a day for three consecutive days. Demineralization was assessed by the percentage change in surface hardness (%CSH) and calcium release into CA, analyzed by the Arsenazo III method. The data were evaluated using Kruskal-Wallis/Dunn's tests. Regarding %CSH, CaneCPI-5+3.0%TMP was the most effective treatment when compared to the CaneCPI-5 group alone. As for calcium release into CA, the CaneCPI-5+0.5% TMP and CaneCPI-5 groups (both with lower calcium release) did not significantly differ from the commercial solution. In conclusion, combination of CaneCPI-5 with TMP enhances the protective potential against initial enamel erosion in vitro.

The aim of this study was to analyze factors associated with the quality of fluoridation in water supply systems in Brazil in 2018. An ecological study was conducted using official data sources on fluoridation provision and fluoride concentration surveillance in 2018. Inclusion criteria were municipalities with a water supply system and accurate data. Municipalities meeting the quality standard, defined as having 80% or more of water samples within the optimal level for caries prevention were classified as "very good" fluoridation quality. Independent variables encompassed structural aspects, socioeconomic factors, and indicators of managerial and technical capabilities in water surveillance. Prevalence ratios were estimated using Poisson regression with robust variance. A total of 58.9% of municipalities with water supply systems had fluoride-adjusted water, with 65.3% adequately contributing to the surveillance data system. Among these, 42.2% exhibited "very good" fluoridation quality. Quality was higher in larger municipalities with elevated socioeconomic indexes and per capita expenditure on sanitary surveillance above the median. Additionally, municipalities with a conformity rate of free residual chlorine concentration of 75% or higher had better fluoridation quality. After adjusting for all variables, fluoridation quality was lower in municipalities with above-median per capita gross domestic product, higher socioeconomic inequality, and below-median monthly household per capita income. Fluoridation quality was linked to municipality-level characteristics concerning structural aspects, socioeconomic factors, and managerial and technical factors in water surveillance. The information generated regarding the coverage features of surveillance and fluoridation strategies can be highly valuable for redirecting inter-sectoral public policy management.

The aim of this study was to evaluate in vivo dental biofilm acidogenicity induced by nine long-term pediatric oral liquid medications (OLMs). A double-blind crossover randomized clinical trial was conducted with 12 individuals aged 18 to 22 years who had good oral hygiene (OSI < 1.1) and a DMFT index of less than 12. Each participant was exposed to nine OLMs and a 10% sucrose solution (positive control) as part of the crossover design. The pH of the dental biofilm was measured with a Beetrode® microelectrode at 0, 5, 10, 15, 20, 25, and 30 min. Statistical analysis was performed to determine the minimum pH and the area under the curve (AUC). One-way ANOVA was utilized, and the significance level was set at 0.05. Pediatric OLMs caused a sucrose-like decrease in biofilm pH, regardless of therapeutic class (p > 0.05). The mean ± standard deviation of the AUC ranged from 16.26 ± 11.59 (cetirizine) to 39.22 ± 20.81 (azithromycin), with no statistically significant difference compared to sucrose (25.22 ± 6.97) (p > 0.05). The findings suggest that pediatric OLMs contribute to dental biofilm acidogenicity, with a more pronounced effect induced by medications used for respiratory diseases and also by antibiotics.

This cross-sectional observational study aimed to evaluate and compare facial metrics in women aged 20-65 years using a three-dimensional (3D) stereophotogrammetry system and to establish standardized values for facial metric variations in different age subgroups. This study included 84 Caucasian women divided into two groups based on their age: group 1 (G1) included women aged 20-40 years and group 2 (G2) included women aged 41-65 years. Twenty-one morphometric points on the face were identified, and the facial images were captured using a 3D stereophotogrammetry system, Twenty-three linear measures and 12 angular measures were evaluated, revealing statistically significant differences in 11 linear and 5 angular measures between the groups. In the G2 group, nasal and mouth width, lip philtrum height, Tragus-Nasion and Tragus-Pronasale lengths were increased, along with increased nasofrontal angle, decreased palpebral fissure inclination, and lip vermilion angles. However, palpebral fissure width and height, binocular width, and lip vermilion height were reduced. The aging process in women causes substantial changes in facial features, particularly in the middle and lower thirds of the face. Conversely, no major changes were observed in the upper third of the face. Our study findings provide potential insights for clinicians in developing facial rejuvenation procedures as well as for forensic purposes and surgical planning. The standardized facial metrics values in different age subgroups can guide clinicians in determining appropriate treatment plans for patients seeking facial rejuvenation.