Three-phase Self-Excited Induction Generators (SEIGs) are commonly employed for electricity generation in remote or isolated areas. SEIGs are preferred in such regions due to their ability to create a magnetic field by adding a capacitor to one of their terminals. Nevertheless, a significant challenge in utilizing SEIGs is maintaining a consistent output voltage in the presence of load fluctuations. This study aims to investigate the impact of generator rotation on the SEIG's output voltage and determine the optimal rotation speed required for achieving a stable output voltage. Ensuring stable voltage regulation is crucial to guarantee the proper functioning of all loads connected to the SEIG. Furthermore, operating the SEIG in parallel with other generators is advantageous. The methodology employed in this study involves varying the load supplied by the SEIG at different capacitor values. Unwanted voltage variations occur due to load fluctuations within a generating system or SEIG. Adjustments to the generator's rotation speed are made to uphold a uniform voltage level. The variables considered in this study include the generator's rotation speed, capacitor size, and load fluctuations. Simulation results demonstrate that the SEIG's output voltage is affected by the generator's rotation speed, and maintaining a consistent voltage necessitates appropriate adjustments to capacitor values and generator speed. This research enhances understanding of SEIG characteristics and offers guidance on effective settings for maintaining a stable output voltage at various generator rotation speeds. Future research can focus on practically implementing these findings to enhance the performance of SEIGs in real-world applications
{"title":"Effect of rotation on achieving constant voltage in three-phase self-excited induction generator for small scale wind turbines application","authors":"Ahmad Syuhada, Tarmizi Tarmizi, Akhyar Akhyar","doi":"10.30811/jpl.v22i3.5279","DOIUrl":"https://doi.org/10.30811/jpl.v22i3.5279","url":null,"abstract":"Three-phase Self-Excited Induction Generators (SEIGs) are commonly employed for electricity generation in remote or isolated areas. SEIGs are preferred in such regions due to their ability to create a magnetic field by adding a capacitor to one of their terminals. Nevertheless, a significant challenge in utilizing SEIGs is maintaining a consistent output voltage in the presence of load fluctuations. This study aims to investigate the impact of generator rotation on the SEIG's output voltage and determine the optimal rotation speed required for achieving a stable output voltage. Ensuring stable voltage regulation is crucial to guarantee the proper functioning of all loads connected to the SEIG. Furthermore, operating the SEIG in parallel with other generators is advantageous. The methodology employed in this study involves varying the load supplied by the SEIG at different capacitor values. Unwanted voltage variations occur due to load fluctuations within a generating system or SEIG. Adjustments to the generator's rotation speed are made to uphold a uniform voltage level. The variables considered in this study include the generator's rotation speed, capacitor size, and load fluctuations. Simulation results demonstrate that the SEIG's output voltage is affected by the generator's rotation speed, and maintaining a consistent voltage necessitates appropriate adjustments to capacitor values and generator speed. This research enhances understanding of SEIG characteristics and offers guidance on effective settings for maintaining a stable output voltage at various generator rotation speeds. Future research can focus on practically implementing these findings to enhance the performance of SEIGs in real-world applications","PeriodicalId":166128,"journal":{"name":"Jurnal POLIMESIN","volume":"117 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141714526","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The process of cutting low carbon steel (ST-37) typically utilizes High-Speed Steel (HSS) tools owing to their high hardness, affordability, and ease of shaping tool geometry. In machining, tool geometry plays a crucial role in the material cutting process and determines the quality of the final product, particularly surface roughness. The objective of this research is to achieve optimal surface roughness by varying the tool geometry and nose radius. This study employed an experimental approach using ST-37 and HSS tools. The variations in tool geometry include side rake angles of 12°, 15°, and 18°; side cutting edge angles of 85°, 80°, and 75°; and nose radii of 0 mm, 0.4 mm, and 0.8 mm. The machining parameters applied consist of a cutting depth of 1 mm and 2 mm, spindle rotation speeds of 185 rpm, 425 rpm, and 624 rpm, and a feed rate of 0.05 mm/rev, 0.075 mm/rev, and 0.1 mm/rev. Tool wear measurements were captured using a USB camera, whereas the surface roughness was assessed using a surface roughness tester. The impact of the tool geometry on the surface roughness was analyzed using the Taguchi-Grey Relational Analysis (Taguchi-GRA) and ANOVA methods. The optimal combination for ST-37 lathe machining with a sharpening tool is: A1 (cutting depth 1 mm), B1 (cutting speed 17.42 m/min), C3 (feed 0.05 mm/rev), D1 (corner radius 0 mm), E3 (side rake angle γ 18°), and F3 (side cutting edge angle γ 75°). According to the Analysis of Variance (ANOVA), three factors—cutting speed, tool tip angle, and chip angle—should be considered to achieve minimal tool wear and desirable surface roughness during machining
{"title":"Optimization of tool wear and surface roughness in ST-37 steel turning process with varying tool angles and machining parameters","authors":"Y. Burhanuddin, S. Harun, G. Ibrahim, A. Hamni","doi":"10.30811/jpl.v22i3.4983","DOIUrl":"https://doi.org/10.30811/jpl.v22i3.4983","url":null,"abstract":"The process of cutting low carbon steel (ST-37) typically utilizes High-Speed Steel (HSS) tools owing to their high hardness, affordability, and ease of shaping tool geometry. In machining, tool geometry plays a crucial role in the material cutting process and determines the quality of the final product, particularly surface roughness. The objective of this research is to achieve optimal surface roughness by varying the tool geometry and nose radius. This study employed an experimental approach using ST-37 and HSS tools. The variations in tool geometry include side rake angles of 12°, 15°, and 18°; side cutting edge angles of 85°, 80°, and 75°; and nose radii of 0 mm, 0.4 mm, and 0.8 mm. The machining parameters applied consist of a cutting depth of 1 mm and 2 mm, spindle rotation speeds of 185 rpm, 425 rpm, and 624 rpm, and a feed rate of 0.05 mm/rev, 0.075 mm/rev, and 0.1 mm/rev. Tool wear measurements were captured using a USB camera, whereas the surface roughness was assessed using a surface roughness tester. The impact of the tool geometry on the surface roughness was analyzed using the Taguchi-Grey Relational Analysis (Taguchi-GRA) and ANOVA methods. The optimal combination for ST-37 lathe machining with a sharpening tool is: A1 (cutting depth 1 mm), B1 (cutting speed 17.42 m/min), C3 (feed 0.05 mm/rev), D1 (corner radius 0 mm), E3 (side rake angle γ 18°), and F3 (side cutting edge angle γ 75°). According to the Analysis of Variance (ANOVA), three factors—cutting speed, tool tip angle, and chip angle—should be considered to achieve minimal tool wear and desirable surface roughness during machining","PeriodicalId":166128,"journal":{"name":"Jurnal POLIMESIN","volume":"114 23","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141712876","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Alief Muhammad, Mochamad Fani Nur Umri, Muhammad Fathuddin Noor, Dani Hari Tunggal Prasetyo, Indah Noor Dwi Kusuma Dewi, Angga Prasmana, Mas Ahmad Baihaqi, Hartawan Abdillah
In the continuum of time and technological advancement, the use of metals, specifically carbon steel, has significantly increased as primary materials in various operational and industrial domains, including tool fabrication and automotive components. To meet the evolving demands of industries, precise heat treatment processes have been developed to enhance the metallic properties. This study specifically focused on the application of the Quenching-Partitioning-Tempering (Q-P-T) method to ASTM A36 steel. The study investigated different partitioning temperatures, namely 300℃, 350℃, and 400℃, with 15-minute intervals. A comprehensive set of mechanical tests, including hardness, tensile, and microstructural analyses, were conducted to assess the response of the material to the treatment. The results reveal significant findings: a partitioning temperature of 300℃ yields the highest hardness value of 164 Vickers Hardness Number (VHN). Furthermore, the tensile tests demonstrate that a partitioning temperature of 300℃ is optimal, achieving a maximum stress value of 515.73 MPa. Conversely, a partitioning temperature of 400℃ exhibits the highest strain value at 21.08% and the highest elastic modulus value at 11.47 GPa. Microstructural evaluations highlighted the presence of pearlite and ferrite phases, with the partitioning temperature of 300°C displaying the highest proportion of pearlite phase at 38.5%. This meticulous investigation expands our understanding of metallurgy and underscores the intricate relationship between partitioning temperatures and the mechanical properties of ASTM A36 steel. It provides valuable insights for material design and application methodologies and facilitates advancements in industrial practices
{"title":"Investigating the effects of partitioning temperature fluctuations on the mechanical properties of ASTM A36 carbon steel using Q-P-T heat treatment: an experimental study","authors":"Alief Muhammad, Mochamad Fani Nur Umri, Muhammad Fathuddin Noor, Dani Hari Tunggal Prasetyo, Indah Noor Dwi Kusuma Dewi, Angga Prasmana, Mas Ahmad Baihaqi, Hartawan Abdillah","doi":"10.30811/jpl.v22i3.5007","DOIUrl":"https://doi.org/10.30811/jpl.v22i3.5007","url":null,"abstract":"In the continuum of time and technological advancement, the use of metals, specifically carbon steel, has significantly increased as primary materials in various operational and industrial domains, including tool fabrication and automotive components. To meet the evolving demands of industries, precise heat treatment processes have been developed to enhance the metallic properties. This study specifically focused on the application of the Quenching-Partitioning-Tempering (Q-P-T) method to ASTM A36 steel. The study investigated different partitioning temperatures, namely 300℃, 350℃, and 400℃, with 15-minute intervals. A comprehensive set of mechanical tests, including hardness, tensile, and microstructural analyses, were conducted to assess the response of the material to the treatment. The results reveal significant findings: a partitioning temperature of 300℃ yields the highest hardness value of 164 Vickers Hardness Number (VHN). Furthermore, the tensile tests demonstrate that a partitioning temperature of 300℃ is optimal, achieving a maximum stress value of 515.73 MPa. Conversely, a partitioning temperature of 400℃ exhibits the highest strain value at 21.08% and the highest elastic modulus value at 11.47 GPa. Microstructural evaluations highlighted the presence of pearlite and ferrite phases, with the partitioning temperature of 300°C displaying the highest proportion of pearlite phase at 38.5%. This meticulous investigation expands our understanding of metallurgy and underscores the intricate relationship between partitioning temperatures and the mechanical properties of ASTM A36 steel. It provides valuable insights for material design and application methodologies and facilitates advancements in industrial practices","PeriodicalId":166128,"journal":{"name":"Jurnal POLIMESIN","volume":"407 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141707993","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Passive solar desalination is a process of reducing the salt content of salt water to produce fresh water by utilizing solar heat. In recent years, interfacial heating has been proposed as an alternative to evaporation by creating localized heat on the water surface. Charcoal is an absorbent, heat storage, and wettability material, so the evaporation process not only occurs on the surface of seawater but also on the surface of the charcoal, which results from this wettability. The height of the charcoal indicates the distance the steam travels to reach the glass surface for the condensation process, thereby speeding up evaporation. The experiment was carried out in 4 single-slope-type basins using tubes filled with charcoal as high as 30, 40, and 50 mm for 8 hours in the sun. The results showed that adding heat-absorbing material to the basin was able to accelerate seawater to reach its boiling point so that it could evaporate. The temperature and humidity in each basin also have a similar changing trend where temperature is strongly influenced by solar radiation. The use of charcoal can also increase the rate of convection and evaporation heat transfer in the basin, as well as the maximum efficiency in basin 4 with an efficiency value of 56.40%, basin 2 at 53.17%, basin 3 at 51.62%, and basin 1 44.17%. Efficiency is obtained from the desalination efficiency equation, namely the ratio of the latent heat of vaporization to the solar energy entering the system
{"title":"Effect of tubular-typed charcoal height variations on efficiency in passive interfacial solar desalination","authors":"Tri Ramadhani Pardiono, Muhamad Jafri, B. Tarigan","doi":"10.30811/jpl.v22i3.4890","DOIUrl":"https://doi.org/10.30811/jpl.v22i3.4890","url":null,"abstract":"Passive solar desalination is a process of reducing the salt content of salt water to produce fresh water by utilizing solar heat. In recent years, interfacial heating has been proposed as an alternative to evaporation by creating localized heat on the water surface. Charcoal is an absorbent, heat storage, and wettability material, so the evaporation process not only occurs on the surface of seawater but also on the surface of the charcoal, which results from this wettability. The height of the charcoal indicates the distance the steam travels to reach the glass surface for the condensation process, thereby speeding up evaporation. The experiment was carried out in 4 single-slope-type basins using tubes filled with charcoal as high as 30, 40, and 50 mm for 8 hours in the sun. The results showed that adding heat-absorbing material to the basin was able to accelerate seawater to reach its boiling point so that it could evaporate. The temperature and humidity in each basin also have a similar changing trend where temperature is strongly influenced by solar radiation. The use of charcoal can also increase the rate of convection and evaporation heat transfer in the basin, as well as the maximum efficiency in basin 4 with an efficiency value of 56.40%, basin 2 at 53.17%, basin 3 at 51.62%, and basin 1 44.17%. Efficiency is obtained from the desalination efficiency equation, namely the ratio of the latent heat of vaporization to the solar energy entering the system","PeriodicalId":166128,"journal":{"name":"Jurnal POLIMESIN","volume":"3 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141711393","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The Pressure Swing Adsorption (PSA) method operates by passing air through an adsorbent to produce concentrated oxygen gas. Zeolites are commonly utilized as adsorbents due to their ability to adsorb nitrogen from the surrounding air. Two types of zeolites commonly employed are natural and synthetic zeolites. While the utilization of natural zeolites as adsorbents in oxygen purification remains limited, their potential as an alternative adsorbent is worth exploring in this field. This study focused on developing physically activated Klaten natural zeolite as an adsorbent to enhance oxygen purity. Physical activation involved heating for 1.5 hours using an electric oven at four temperature variations (250ºC, 300ºC, 350ºC, and 400ºC). Additionally, four distinct flow rates were tested: 0.1; 0.5; 1.0; and 1.5 lpm. Oxygen purification testing revealed that higher activation temperatures led to greater increases in oxygen concentration. The highest increase of 2.45% was achieved at an activation temperature of 400ºC, while the lowest increase of 1.75% was observed at 250ºC with a flow rate of 0.1 lpm. With a 10-minute holding period, oxygen content during the adsorption process ranged from 1.35% to 2.45%, compared to 0.60%-0.75% without holding. Physical activation of zeolite from Klaten enhanced its nitrogen absorption capacity, indicating the potential of natural zeolite from Klaten for oxygen purification through optimized activation processes, possibly via chemical activation
{"title":"Analysis of nitrogen adsorption capability at various activation temperatures of Klaten natural zeolite","authors":"Novi Caroko, S. Sukamta","doi":"10.30811/jpl.v22i3.4882","DOIUrl":"https://doi.org/10.30811/jpl.v22i3.4882","url":null,"abstract":"The Pressure Swing Adsorption (PSA) method operates by passing air through an adsorbent to produce concentrated oxygen gas. Zeolites are commonly utilized as adsorbents due to their ability to adsorb nitrogen from the surrounding air. Two types of zeolites commonly employed are natural and synthetic zeolites. While the utilization of natural zeolites as adsorbents in oxygen purification remains limited, their potential as an alternative adsorbent is worth exploring in this field. This study focused on developing physically activated Klaten natural zeolite as an adsorbent to enhance oxygen purity. Physical activation involved heating for 1.5 hours using an electric oven at four temperature variations (250ºC, 300ºC, 350ºC, and 400ºC). Additionally, four distinct flow rates were tested: 0.1; 0.5; 1.0; and 1.5 lpm. Oxygen purification testing revealed that higher activation temperatures led to greater increases in oxygen concentration. The highest increase of 2.45% was achieved at an activation temperature of 400ºC, while the lowest increase of 1.75% was observed at 250ºC with a flow rate of 0.1 lpm. With a 10-minute holding period, oxygen content during the adsorption process ranged from 1.35% to 2.45%, compared to 0.60%-0.75% without holding. Physical activation of zeolite from Klaten enhanced its nitrogen absorption capacity, indicating the potential of natural zeolite from Klaten for oxygen purification through optimized activation processes, possibly via chemical activation","PeriodicalId":166128,"journal":{"name":"Jurnal POLIMESIN","volume":"32 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141711511","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ariyanto Ariyanto, Muhammad Aqdar Fitrah, Salma Salu, Muh. Nurul Haq Amaluddin, Arman Latif, Rahmat Alwi, Halim Halim
To ensure the quality of welded joints in the hull area, welding testing is very important and must be carried out. But unfortunately, currently the quality testing process of welded joints was still limited to penetrant tests and lime tests. The purpose of this study was to obtain a portable welding testing machine that was able to obtain fairly accurate test results on hull welding defects using a vacuum system. The research method is experimental by involving data collection through field experiments, testing is carried out with the resulting weld defect research subjects and the length of testing time on 1G and 3G position welding. The results of the study by compared tests among Welded Vacuum Testing (WVT) machines, Magnetic Particle tests (MP), and Penetrant Tests (PT). The three experiments detected leaking weld defects, spark sparks, pinholes, overlaps, and undercuts. For test results with machines made, welding defects that were successfully detected were leaks in the 1G position welding workpiece and undercut in the 3G position welding workpiece. Air bubbles at a vacuum pressure of 0.2 bar are detected, meaning that there is a defect in the welded joint. This tool can be used in bilge testing.
{"title":"Design and manufacturing of Welded Vacuum Testing (WVT) tool","authors":"Ariyanto Ariyanto, Muhammad Aqdar Fitrah, Salma Salu, Muh. Nurul Haq Amaluddin, Arman Latif, Rahmat Alwi, Halim Halim","doi":"10.30811/jpl.v22i3.5024","DOIUrl":"https://doi.org/10.30811/jpl.v22i3.5024","url":null,"abstract":"To ensure the quality of welded joints in the hull area, welding testing is very important and must be carried out. But unfortunately, currently the quality testing process of welded joints was still limited to penetrant tests and lime tests. The purpose of this study was to obtain a portable welding testing machine that was able to obtain fairly accurate test results on hull welding defects using a vacuum system. The research method is experimental by involving data collection through field experiments, testing is carried out with the resulting weld defect research subjects and the length of testing time on 1G and 3G position welding. The results of the study by compared tests among Welded Vacuum Testing (WVT) machines, Magnetic Particle tests (MP), and Penetrant Tests (PT). The three experiments detected leaking weld defects, spark sparks, pinholes, overlaps, and undercuts. For test results with machines made, welding defects that were successfully detected were leaks in the 1G position welding workpiece and undercut in the 3G position welding workpiece. Air bubbles at a vacuum pressure of 0.2 bar are detected, meaning that there is a defect in the welded joint. This tool can be used in bilge testing.","PeriodicalId":166128,"journal":{"name":"Jurnal POLIMESIN","volume":"22 17","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141699975","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Mochamad Yusuf Santoso, Mades Darul Khairiansyah, Raya Fitrian Hernasa
Horizontal Directional Drilling (HDD) has today emerged as a significant and efficient Horizontal Directional Drilling (HDD) has today emerged as a significant and efficient technique for installing pipelines for a variety of purposes, including the production of oil, natural gas, water, sewer, electrical, and telecommunications. Due to the complexity of the technology and the intricate interplay of numerous processes, the safety risks associated with process uncertainty are substantial. However, risk analysis for HDD projects is generally done using qualitative methods. One of the most common factors used for HDD risk assessment is Pipe Stress Analysis (PSA). In this article, a combination of material evaluation and PSA for HDD safety design is suggested to improve the risk analysis. The evaluation will commence with an assessment of the material, followed by an examination of the wall thickness. Subsequently, an analysis of HDD design and pipe stress will be conducted. Using 10-inch API 5L Gr. B pipe, the safety design was successfully tested for a gas pipe project. When using HDD, a natural bend value of no less than 415.3 meters must have a horizontal length of 168 meters. According to the curvature, the length of the entire pipe is 169.03 meters. The combined installation stress was less than 1, while the combined operation stress was 114.87 MPa. These two values met the criteria specified in the standard. Overall, those steps were able to ensure that the HDD installation design is safe for construction.
{"title":"Improving safety design for gas pipeline installation via horizontal directional drilling: a pipe stress analysis approach","authors":"Mochamad Yusuf Santoso, Mades Darul Khairiansyah, Raya Fitrian Hernasa","doi":"10.30811/jpl.v22i3.5128","DOIUrl":"https://doi.org/10.30811/jpl.v22i3.5128","url":null,"abstract":"Horizontal Directional Drilling (HDD) has today emerged as a significant and efficient Horizontal Directional Drilling (HDD) has today emerged as a significant and efficient technique for installing pipelines for a variety of purposes, including the production of oil, natural gas, water, sewer, electrical, and telecommunications. Due to the complexity of the technology and the intricate interplay of numerous processes, the safety risks associated with process uncertainty are substantial. However, risk analysis for HDD projects is generally done using qualitative methods. One of the most common factors used for HDD risk assessment is Pipe Stress Analysis (PSA). In this article, a combination of material evaluation and PSA for HDD safety design is suggested to improve the risk analysis. The evaluation will commence with an assessment of the material, followed by an examination of the wall thickness. Subsequently, an analysis of HDD design and pipe stress will be conducted. Using 10-inch API 5L Gr. B pipe, the safety design was successfully tested for a gas pipe project. When using HDD, a natural bend value of no less than 415.3 meters must have a horizontal length of 168 meters. According to the curvature, the length of the entire pipe is 169.03 meters. The combined installation stress was less than 1, while the combined operation stress was 114.87 MPa. These two values met the criteria specified in the standard. Overall, those steps were able to ensure that the HDD installation design is safe for construction.","PeriodicalId":166128,"journal":{"name":"Jurnal POLIMESIN","volume":"70 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141697727","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Rochmad Winarso, Slamet Khoeron, Rianto Wibowo, D. Darmanto
The number of coffee shops in Indonesia has grown from 1,083 stalls in 2016 to over 2,937 booths in 2019, representing a threefold growth. Coffee shop establishments must provide two essential kinds of equipment: espresso machines, which use pressure, and filter machines, which employ infusion. The issue lies in the exorbitant cost and immense power requirements of semi-automatic and automated espresso machines, which necessitate the use of a manual espresso machine for commercial operations. The equipment can generate satisfactory espresso but encounters several challenges; specifically, the espresso generated is characterized by inconsistency, constantly varying in quality. This might arise due to the erratic nature of the manufacturing process. The two objectives of this study are: (1) to design an economically efficient semi-automatic espresso machine capable of producing products that meet the international quality standards set by the Specialty Coffee Association (SCA standard) and (2) to investigate the impact of critical factors such as pressure, temperature, and grind size, on the consistent quality of the resulting coffee (measured by Total Dissolved Solids (TDS) and extraction yield (EXT)). The research employs the Research and Development (RD) methodology. The research findings indicate that the optimal levels of Total Dissolved Solids (TDS) and extraction yield (EXT) may be attained by using a pressure setting of 8 bars, a temperature of 90ºC, and a grind size of 3.2 on the scale. The technique for optimizing the response resulted in Total Dissolved Solids (TDS) levels of 10.03% and extraction yield (EXT) values of 19.56%. The results have been deemed acceptable based on the criteria set by the global standards of Specialty Coffee Association (SCA).
{"title":"The effect of temperature, pressure, and grind size on Total Dissolved Solids (TDS) and extraction yield of semi-automatic espresso machines","authors":"Rochmad Winarso, Slamet Khoeron, Rianto Wibowo, D. Darmanto","doi":"10.30811/jpl.v22i3.4636","DOIUrl":"https://doi.org/10.30811/jpl.v22i3.4636","url":null,"abstract":"The number of coffee shops in Indonesia has grown from 1,083 stalls in 2016 to over 2,937 booths in 2019, representing a threefold growth. Coffee shop establishments must provide two essential kinds of equipment: espresso machines, which use pressure, and filter machines, which employ infusion. The issue lies in the exorbitant cost and immense power requirements of semi-automatic and automated espresso machines, which necessitate the use of a manual espresso machine for commercial operations. The equipment can generate satisfactory espresso but encounters several challenges; specifically, the espresso generated is characterized by inconsistency, constantly varying in quality. This might arise due to the erratic nature of the manufacturing process. The two objectives of this study are: (1) to design an economically efficient semi-automatic espresso machine capable of producing products that meet the international quality standards set by the Specialty Coffee Association (SCA standard) and (2) to investigate the impact of critical factors such as pressure, temperature, and grind size, on the consistent quality of the resulting coffee (measured by Total Dissolved Solids (TDS) and extraction yield (EXT)). The research employs the Research and Development (RD) methodology. The research findings indicate that the optimal levels of Total Dissolved Solids (TDS) and extraction yield (EXT) may be attained by using a pressure setting of 8 bars, a temperature of 90ºC, and a grind size of 3.2 on the scale. The technique for optimizing the response resulted in Total Dissolved Solids (TDS) levels of 10.03% and extraction yield (EXT) values of 19.56%. The results have been deemed acceptable based on the criteria set by the global standards of Specialty Coffee Association (SCA).","PeriodicalId":166128,"journal":{"name":"Jurnal POLIMESIN","volume":"38 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141710262","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Vegetable oil, obtained from plants such as coconut or Jatropha curcas, serves as a valuable renewable energy source. Nonetheless, it presents certain limitations in comparison to diesel fuels, namely, low volatility and high viscosity. One straightforward approach to overcome these limitations is the addition of high-volatility oil and low-viscosity oil. In this study, we incorporated 10% clove oil into coconut oil and Jatropha curcas oil. Fuel properties, including density, viscosity, flash point, and heating value, were measured in accordance with international standards. Additionally, Thermogravimetric Analysis (TGA) testing was performed to detect decomposition during the heating process. The findings indicated that the addition of clove oil increases density (from 0.922 g/ml to 0.934 g/ml), while other properties decrease, such as viscosity (from 30.12 cst to 27.7 cst), flash point (from 286°C to 182°C), and heating value (from 37.1 MJ/kg to 35.8 MJ/kg). TGA demonstrated that the inclusion of clove oil resulted in increased decomposition within the temperature range of 200°C–400°C, suggesting that clove oil falls into the category of medium-volatile oils. Although the addition of clove oil were able to modify the fuel properties of vegetable oil, it did not align with the characteristics of conventional diesel fuel and necessitates further modification for practical implementation
{"title":"Clove oil additives in vegetable oil: an assessment of fuel properties","authors":"A. Gamayel","doi":"10.30811/jpl.v22i3.5207","DOIUrl":"https://doi.org/10.30811/jpl.v22i3.5207","url":null,"abstract":"Vegetable oil, obtained from plants such as coconut or Jatropha curcas, serves as a valuable renewable energy source. Nonetheless, it presents certain limitations in comparison to diesel fuels, namely, low volatility and high viscosity. One straightforward approach to overcome these limitations is the addition of high-volatility oil and low-viscosity oil. In this study, we incorporated 10% clove oil into coconut oil and Jatropha curcas oil. Fuel properties, including density, viscosity, flash point, and heating value, were measured in accordance with international standards. Additionally, Thermogravimetric Analysis (TGA) testing was performed to detect decomposition during the heating process. The findings indicated that the addition of clove oil increases density (from 0.922 g/ml to 0.934 g/ml), while other properties decrease, such as viscosity (from 30.12 cst to 27.7 cst), flash point (from 286°C to 182°C), and heating value (from 37.1 MJ/kg to 35.8 MJ/kg). TGA demonstrated that the inclusion of clove oil resulted in increased decomposition within the temperature range of 200°C–400°C, suggesting that clove oil falls into the category of medium-volatile oils. Although the addition of clove oil were able to modify the fuel properties of vegetable oil, it did not align with the characteristics of conventional diesel fuel and necessitates further modification for practical implementation","PeriodicalId":166128,"journal":{"name":"Jurnal POLIMESIN","volume":"8 7","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141708824","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Y. Herlambang, Bono Bono, G. Suwoto, Baktiyar Mei Hermawan, F. Sumarno, M. Margana, Marliyati Marliyati
The aim of this study is to investigate the performance of breast-shot waterwheel with different electrical loads to increase efficiency. The method used is to design a pinwheel blade using blade material with a supporting frame added to the top, middle, and bottom of the pinwheel blade. The blade material used a thickness of 1.5 mm with angle iron installed on the three sides of the blade with a size of 30 mm × 30 mm × 3 mm. Tests were carried out with variations in lamp load when the water flow rate and water velocity were constant. Parameters measured in this test are water flow rate (m3/s), velocity of water (m/s), head of water (m), generator rotation (rpm), electric current (A), and generator output voltage (V). The results of the Hydro Power Plant (MHP) test with a waterwheel drive with the highest efficiency value at a water discharge of 0.267 m3/s, a velocity of 5.069 m/s, a generator rotation of 940 rpm, and a load of 840 W, which is 10.74%.
{"title":"Micro Hydro Power Plant (MHP) performance using breast-shot waterwheel with different electrical load to improve efficiency","authors":"Y. Herlambang, Bono Bono, G. Suwoto, Baktiyar Mei Hermawan, F. Sumarno, M. Margana, Marliyati Marliyati","doi":"10.30811/jpl.v22i3.4608","DOIUrl":"https://doi.org/10.30811/jpl.v22i3.4608","url":null,"abstract":"The aim of this study is to investigate the performance of breast-shot waterwheel with different electrical loads to increase efficiency. The method used is to design a pinwheel blade using blade material with a supporting frame added to the top, middle, and bottom of the pinwheel blade. The blade material used a thickness of 1.5 mm with angle iron installed on the three sides of the blade with a size of 30 mm × 30 mm × 3 mm. Tests were carried out with variations in lamp load when the water flow rate and water velocity were constant. Parameters measured in this test are water flow rate (m3/s), velocity of water (m/s), head of water (m), generator rotation (rpm), electric current (A), and generator output voltage (V). The results of the Hydro Power Plant (MHP) test with a waterwheel drive with the highest efficiency value at a water discharge of 0.267 m3/s, a velocity of 5.069 m/s, a generator rotation of 940 rpm, and a load of 840 W, which is 10.74%.","PeriodicalId":166128,"journal":{"name":"Jurnal POLIMESIN","volume":"16 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141709105","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：