The recycling and high-valued added reuse of automotive plastics have elicited global attention as the number of end-of-life vehicles increase. In the paper, the two-stage high-voltage electrostatic separation is used to explore the sorting of passenger vehicle plastic mixtures of PP, ABS and PVC. The purities of PP, ABS and PVC are all higher than 97%, and the recovery rates are 55%, 93%, and 48%, respectively. Taking PP plastic as an example, the mechanical properties of the recycled materials and the different ratios of recycled and new material mixtures are studied. Results show that the passenger car bumpers reproduced with a 7:3 ratio of new and recycled materials can satisfy the performance requirements. The finding provides a reference for the high additional value reuse of other automotive plastics.
{"title":"High-voltage Electrostatic Separation and Equivalent Reuse of Plastics Used in Passenger Vehicle","authors":"Hongshen Zhang, Yingjie Zhao, Hongfei Zheng","doi":"10.37358/mp.22.2.5595","DOIUrl":"https://doi.org/10.37358/mp.22.2.5595","url":null,"abstract":"\u0000The recycling and high-valued added reuse of automotive plastics have elicited global attention as the number of end-of-life vehicles increase. In the paper, the two-stage high-voltage electrostatic separation is used to explore the sorting of passenger vehicle plastic mixtures of PP, ABS and PVC. The purities of PP, ABS and PVC are all higher than 97%, and the recovery rates are 55%, 93%, and 48%, respectively. Taking PP plastic as an example, the mechanical properties of the recycled materials and the different ratios of recycled and new material mixtures are studied. Results show that the passenger car bumpers reproduced with a 7:3 ratio of new and recycled materials can satisfy the performance requirements. The finding provides a reference for the high additional value reuse of other automotive plastics.\u0000","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":" ","pages":""},"PeriodicalIF":0.8,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49084725","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ramona-Daniela Păvăloiu, Fawzia Sha At, M. Eremia, Cristina Hlevca, M. Petrescu, Mousa Sha�at, Claudia Sevcenco
This study was geared to analyze the preparation methods of pullulan acetate-based nanoparticles loaded with 5-fluorouracil, as well as the potential of pullulan as a biopolymer matrix for obtaining nanoparticles applied in the delivery of anticancer drugs (5-FU). Various methods were used to produce pullulan acetate-based nanoparticles loaded with 5-FU, including nanoprecipitation, modified nanoprecipitation, and double emulsion. Pullulan was previously chemically modified with acetic anhydride, dimethylformamide and pyridine, and yielded pullulan acetate. Pullulan was made using the Aureobasidium pullulans strain through a fermentation procedure. UV-Vis Spectro-photometric and dynamic light scattering (DLS) methods were used to assess entrapment effectiveness, size, and polydispersity index (PDI) of pullulan acetate-based nanoparticles loaded with 5-FU. Based on the properties of the nanoparticles obtained, the optimum preparation method was chosen. The maximum entrapment efficiency was found in pullulan acetate nanoparticles loaded with 5-FU generated by a double emulsion method. The mean hydrodynamic size and PDI of all nanoparticles were adequate. The best formulation showed faster 5-FU release profile in acid phosphate-buffered saline (pH 5) than in phosphate-buffered saline pH 7.4. According to the findings, pullulan derivatives have a great potential for producing nanoparticles that might be used to deliver anticancer medicines.
{"title":"Formulation and Characterisation of Pullulan Acetate Nanoparticles Loaded with 5-Fluorouracil","authors":"Ramona-Daniela Păvăloiu, Fawzia Sha At, M. Eremia, Cristina Hlevca, M. Petrescu, Mousa Sha�at, Claudia Sevcenco","doi":"10.37358/mp.22.2.5593","DOIUrl":"https://doi.org/10.37358/mp.22.2.5593","url":null,"abstract":"\u0000This study was geared to analyze the preparation methods of pullulan acetate-based nanoparticles loaded with 5-fluorouracil, as well as the potential of pullulan as a biopolymer matrix for obtaining nanoparticles applied in the delivery of anticancer drugs (5-FU). Various methods were used to produce pullulan acetate-based nanoparticles loaded with 5-FU, including nanoprecipitation, modified nanoprecipitation, and double emulsion. Pullulan was previously chemically modified with acetic anhydride, dimethylformamide and pyridine, and yielded pullulan acetate. Pullulan was made using the Aureobasidium pullulans strain through a fermentation procedure. UV-Vis Spectro-photometric and dynamic light scattering (DLS) methods were used to assess entrapment effectiveness, size, and polydispersity index (PDI) of pullulan acetate-based nanoparticles loaded with 5-FU. Based on the properties of the nanoparticles obtained, the optimum preparation method was chosen. The maximum entrapment efficiency was found in pullulan acetate nanoparticles loaded with 5-FU generated by a double emulsion method. The mean hydrodynamic size and PDI of all nanoparticles were adequate. The best formulation showed faster 5-FU release profile in acid phosphate-buffered saline (pH 5) than in phosphate-buffered saline pH 7.4. According to the findings, pullulan derivatives have a great potential for producing nanoparticles that might be used to deliver anticancer medicines.\u0000","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":" ","pages":""},"PeriodicalIF":0.8,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46478458","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jebarani Joshua David, R. Kandasamy, Sirshendu Chatterjee
Boswellia seratta (BS) is the best herbal medicine to treat Rheumatoid Arthritis (RA), due to its anti-inflammatory and anti-arthritic activity. Delivering BS through an oral drug delivery system has been in effective, because of its enzymatic degradation within the Gastro-Intestinal (GI) tract. In this paper, we develop a gastro retentive approach for delivering BS to avoid high hepatic first pass metabolism and optimized buccal patch based on the drug delivery characteristics. There are seven different formulated buccal films of BS that were prepared by the solvent casting method, using mucoadhesive polymers, Poly Vinyl Alcohol (PVA), and Sodium Carboxy Methyl Cellulose (SCMC). These with drug formulation can be represented as PCB. The prepared films were evaluated by various physicochemical properties and characterization studies. Results obtained from physico-chemical properties, in-vitro and ex-vivo studies among all seven patches, PCB5 shows better drug-releasing characteristics. This was further confirmed by FT-IR and XRD characterization studies. Also, the data was statistically analysed using Analysis of Variance (ANOVA).
{"title":"Development and Evaluation of Polymer Drug Delivery System (PDDS) for Delivery of Boswellia seratta","authors":"Jebarani Joshua David, R. Kandasamy, Sirshendu Chatterjee","doi":"10.37358/mp.22.2.5583","DOIUrl":"https://doi.org/10.37358/mp.22.2.5583","url":null,"abstract":"\u0000Boswellia seratta (BS) is the best herbal medicine to treat Rheumatoid Arthritis (RA), due to its anti-inflammatory and anti-arthritic activity. Delivering BS through an oral drug delivery system has been in effective, because of its enzymatic degradation within the Gastro-Intestinal (GI) tract. In this paper, we develop a gastro retentive approach for delivering BS to avoid high hepatic first pass metabolism and optimized buccal patch based on the drug delivery characteristics. There are seven different formulated buccal films of BS that were prepared by the solvent casting method, using mucoadhesive polymers, Poly Vinyl Alcohol (PVA), and Sodium Carboxy Methyl Cellulose (SCMC). These with drug formulation can be represented as PCB. The prepared films were evaluated by various physicochemical properties and characterization studies. Results obtained from physico-chemical properties, in-vitro and ex-vivo studies among all seven patches, PCB5 shows better drug-releasing characteristics. This was further confirmed by FT-IR and XRD characterization studies. Also, the data was statistically analysed using Analysis of Variance (ANOVA).\u0000","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":" ","pages":""},"PeriodicalIF":0.8,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49052419","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Milica(Premovic) Cvjeticanin, D. Zorica, V. Krstonošić, Miroslav S Hadnadjev, I. Stojanac, B. Ramić, M. Drobac, L. Petrovic, T. Atanacković
Purpose was to determine the viscoelastic properties of three root canal sealers as a function of temperature, time and frequency using dynamic oscillatory measurements. Methods: Measurements were performed on the dynamic oscillatory rheometer set to temperatures: 25�C, 35�C, 40�C and 65�C. Stress sweep and frequency sweep tests were used in order to determine storage moduli G�, loss moduli G�� and complex viscosity η*. Results Higher values of storage compared to loss moduli indicate the more pronounced solid-like behavior of tested materials. EndoREZ showed the highest values of G� and G�� moduli at all temperatures. With temperature increase the G� and G�� moduli of Sealapex and EndoREZ increased while the moduli of AH Plus decreased. With frequency increase all materials showed viscosity decrease exhibiting non-Newtonion, shear-thinning behavior. With temperature increase AH Plus demonstrated viscosity decrease, while the viscosity of Sealapex and EndoREZ increased. Clinical significance: All tested materials were temperature, time and frequency dependent and this dependency varied between them. The obtained results may be used to predict the rheological behavior of root canal sealers in different temperature conditions, thus helping as to estimate optimal handling characteristics for specific clinical applications.
{"title":"The Influence of Temperature on Rheological Properties of Three Root Canal Sealers","authors":"Milica(Premovic) Cvjeticanin, D. Zorica, V. Krstonošić, Miroslav S Hadnadjev, I. Stojanac, B. Ramić, M. Drobac, L. Petrovic, T. Atanacković","doi":"10.37358/mp.22.2.5596","DOIUrl":"https://doi.org/10.37358/mp.22.2.5596","url":null,"abstract":"\u0000Purpose was to determine the viscoelastic properties of three root canal sealers as a function of temperature, time and frequency using dynamic oscillatory measurements. Methods: Measurements were performed on the dynamic oscillatory rheometer set to temperatures: 25�C, 35�C, 40�C and 65�C. Stress sweep and frequency sweep tests were used in order to determine storage moduli G�, loss moduli G�� and complex viscosity η*. Results Higher values of storage compared to loss moduli indicate the more pronounced solid-like behavior of tested materials. EndoREZ showed the highest values of G� and G�� moduli at all temperatures. With temperature increase the G� and G�� moduli of Sealapex and EndoREZ increased while the moduli of AH Plus decreased. With frequency increase all materials showed viscosity decrease exhibiting non-Newtonion, shear-thinning behavior. With temperature increase AH Plus demonstrated viscosity decrease, while the viscosity of Sealapex and EndoREZ increased. Clinical significance: All tested materials were temperature, time and frequency dependent and this dependency varied between them. The obtained results may be used to predict the rheological behavior of root canal sealers in different temperature conditions, thus helping as to estimate optimal handling characteristics for specific clinical applications.\u0000","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":" ","pages":""},"PeriodicalIF":0.8,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48395394","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
C. Stochioiu, Victor-Marian Marinescu, D. Tudose, A. Hadar
The present paper analyses the possibility of using the digital image correlation technique to study the mechanical behavior of small scale components. A microscope is supplemented to the equipment for magnification, together with a miniature tensile testing machine. Several samples with already studied stress concentrators were analyzed. For comparison purposes, a finite element model of the geometry, with appropriate loading conditions, is created and the strain field is compared, in orderv to be validated to the experimental one. Results show that an accurate reading can be made by using this technique. Furthermore, crack initiation and its propagation path can be determined, by the appearance of high strains in the region.
{"title":"Determination of Stress Concentration Effects Using Micro-Digital Image Correlation Techniques in PMMA Specimens","authors":"C. Stochioiu, Victor-Marian Marinescu, D. Tudose, A. Hadar","doi":"10.37358/mp.22.2.5591","DOIUrl":"https://doi.org/10.37358/mp.22.2.5591","url":null,"abstract":"\u0000The present paper analyses the possibility of using the digital image correlation technique to study the mechanical behavior of small scale components. A microscope is supplemented to the equipment for magnification, together with a miniature tensile testing machine. Several samples with already studied stress concentrators were analyzed. For comparison purposes, a finite element model of the geometry, with appropriate loading conditions, is created and the strain field is compared, in orderv to be validated to the experimental one. Results show that an accurate reading can be made by using this technique. Furthermore, crack initiation and its propagation path can be determined, by the appearance of high strains in the region.\u0000","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":" ","pages":""},"PeriodicalIF":0.8,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45522576","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Novel block biocopolymers were made by copolymerizing the prepared polylactide-dipenta-erythritol macromonomer with two different monomers, N-hydroxyethyl acrylamide (HEAA) and N,N-dimethylamino ethyl methacrylate (DMAEMA), with an activator generated by atom transfer radical polymerization (ATRP), to have a different duplicating unit of 10, 25, 50, and 100. ATRP employs a copper(I) bromide (CuBr) catalyst system with N, N, N′, N′′, N′′-pentamethyl diethylenetriamine (PMDETA). Different spectroscopic and analytical methods used for characterization of the prepared biocopolymers, such as FT-IR, 1H NMR, 13C NMR, and GPC, showed that they had narrow dispersity with controllable molecular weight and were accompanied by nanostructures as examined by SEM technique on all biocopolymers, confirming the correctness of the expected structures of biocopolymers. The shape and size of the produced polymeric nanoparticles were determined using a scanning electron microscope (SEM), and they were developed using the Image-J application.
用原子转移自由基聚合(ATRP)产生的活化剂，将制备的聚乳酸-二五红四醇大单体与N-羟乙基丙烯酰胺(HEAA)和N,N-二甲氨基甲基丙烯酸乙酯(DMAEMA)进行共聚，得到了复制单元分别为10、25、50和100的新型嵌段生物共聚物。ATRP采用一种溴化铜(cur)催化剂体系，含有N, N, N '， N '， N ' -五甲基二乙烯三胺(PMDETA)。利用FT-IR、1H NMR、13C NMR和GPC等不同的光谱和分析方法对所制备的生物聚合物进行表征，结果表明，所制备的生物聚合物具有较窄的分散性，分子量可控，并且在所有生物聚合物上都伴有纳米结构，证实了所制备的生物聚合物结构的正确性。通过扫描电子显微镜(SEM)确定了聚合物纳米颗粒的形状和大小，并使用Image-J应用程序对其进行了开发。
{"title":"Synthesis and Characterization of Novel Nano Six-arms of (polylactide-dipentaerythritol)-block-N-hydroxyethyl Acrylamide and N,N-dimethylamino Ethyl Methacrylate Biocopolymers by Atom Transfer Radical Polymerization","authors":"Baqer A. Al-Mayyahi, H. Al-Lami, A. Haddad","doi":"10.37358/mp.22.2.5584","DOIUrl":"https://doi.org/10.37358/mp.22.2.5584","url":null,"abstract":"\u0000Novel block biocopolymers were made by copolymerizing the prepared polylactide-dipenta-erythritol macromonomer with two different monomers, N-hydroxyethyl acrylamide (HEAA) and N,N-dimethylamino ethyl methacrylate (DMAEMA), with an activator generated by atom transfer radical polymerization (ATRP), to have a different duplicating unit of 10, 25, 50, and 100. ATRP employs a copper(I) bromide (CuBr) catalyst system with N, N, N′, N′′, N′′-pentamethyl diethylenetriamine (PMDETA). Different spectroscopic and analytical methods used for characterization of the prepared biocopolymers, such as FT-IR, 1H NMR, 13C NMR, and GPC, showed that they had narrow dispersity with controllable molecular weight and were accompanied by nanostructures as examined by SEM technique on all biocopolymers, confirming the correctness of the expected structures of biocopolymers. The shape and size of the produced polymeric nanoparticles were determined using a scanning electron microscope (SEM), and they were developed using the Image-J application.\u0000","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":" ","pages":""},"PeriodicalIF":0.8,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46013789","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Popitiu, S. Barac, F. Borcan, G. Clerici, A. Rață
Atherosclerosis can affect the blood vessels in any region of the body and the stenosis (narrowing) can be located on an artery that vascularize important organs, such as the brain, abdominal organs or limbs. The endovascular surgery is a modern approach to vascular pathology through minimally invasive techniques (puncture, minimally vascular approach) and it represents an enrichment of the arsenal of surgical techniques and brings considerable improvements in post-operative and long-term outcomes The use of polymer drug-coating balloons is an attractive alternative because they can offer the promise of an improved patency compared to the simple balloons and a reduction in the need for stents. The aims of this study were to describe the polymer materials and to compare the medical endpoints obtained in angiosome-targeted infrapopliteal angioplasty using a simple balloon with two layers, based on polyethylene, and respectively a drug-coated balloon that contains a multiblock copolymer from polyethylene, poly(cylohexylethylene), polyisoprene and poly(1,3-butadiene) covered by Paclitaxel. The balloons were characterized by differential scanning calorimetry, stress-strain and puncture tests in order to describe their physical and mechanical characteristics. On the other hand, 51 patients with critical limb ischemia were treated with different balloon angioplasty and they were monitored for 12 months after the intervention; the following parameters have been evaluated: diabetes, hypertension, renal insufficiency, hemodialysis, stroke, dyslipidemia, heart disease, heart failure, body mass index, number of angiosomes, creatinine, and wound healing, leg salvage and amputation-free survival at 1, 2, 3, 6, 9, 12 months. Significant associations were found in the case of anterior-tibial-artery and posterior-tibial-artery angioplasy and the age, hypertension and renal insufficiency. On the other hand, the results indicate that the drug deposition on the surface of the balloons lead to improved values for the observed medical endpoints. In conclusion, this study reveals that angiosome-based infrapopliteal angioplasty with drug-coated balloons can be associated with better wound healing and leg salvage.
{"title":"Comparative Investigation on Polymer Drug-coating Balloons Used in Infrapopliteal Angioplasty Based on Angiosomes Concept","authors":"M. Popitiu, S. Barac, F. Borcan, G. Clerici, A. Rață","doi":"10.37358/mp.22.2.5597","DOIUrl":"https://doi.org/10.37358/mp.22.2.5597","url":null,"abstract":"\u0000Atherosclerosis can affect the blood vessels in any region of the body and the stenosis (narrowing) can be located on an artery that vascularize important organs, such as the brain, abdominal organs or limbs. The endovascular surgery is a modern approach to vascular pathology through minimally invasive techniques (puncture, minimally vascular approach) and it represents an enrichment of the arsenal of surgical techniques and brings considerable improvements in post-operative and long-term outcomes The use of polymer drug-coating balloons is an attractive alternative because they can offer the promise of an improved patency compared to the simple balloons and a reduction in the need for stents. The aims of this study were to describe the polymer materials and to compare the medical endpoints obtained in angiosome-targeted infrapopliteal angioplasty using a simple balloon with two layers, based on polyethylene, and respectively a drug-coated balloon that contains a multiblock copolymer from polyethylene, poly(cylohexylethylene), polyisoprene and poly(1,3-butadiene) covered by Paclitaxel. The balloons were characterized by differential scanning calorimetry, stress-strain and puncture tests in order to describe their physical and mechanical characteristics. On the other hand, 51 patients with critical limb ischemia were treated with different balloon angioplasty and they were monitored for 12 months after the intervention; the following parameters have been evaluated: diabetes, hypertension, renal insufficiency, hemodialysis, stroke, dyslipidemia, heart disease, heart failure, body mass index, number of angiosomes, creatinine, and wound healing, leg salvage and amputation-free survival at 1, 2, 3, 6, 9, 12 months. Significant associations were found in the case of anterior-tibial-artery and posterior-tibial-artery angioplasy and the age, hypertension and renal insufficiency. On the other hand, the results indicate that the drug deposition on the surface of the balloons lead to improved values for the observed medical endpoints. In conclusion, this study reveals that angiosome-based infrapopliteal angioplasty with drug-coated balloons can be associated with better wound healing and leg salvage.\u0000","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":" ","pages":""},"PeriodicalIF":0.8,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43284784","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Praveen Barmavatu, Sonali Deshmukh, M. Das, R. Aepuru, Venkat Reddy Ragireddy, B. Sravanthi
Every day, the need for composite materials grows. The physical and chemical characteristics of the constituent materials inside the hybrid composite impact the final structure. The rate at which these individual properties are sustained varies, but it has an impact on the final properties of hybrid composites. Sporting goods and lightweight orthopaedic components are made from hybrid composites. Glass fibre epoxy and sawdust are utilised to construct hybrid composites in this study, using glass fibre to epoxy resin ratios of (60:40, 60:39, 60:38, 60:37).The current research involves the creation of hybrid composites and their study for flexural and tensile strength under various load conditions. Applying resin and hardener, as well as inserting reinforcement, is repeated in the hand-layup manufacturing process to improve characteristics and create a laminate form. They improve fatigue and fracture resistance while providing dimensional stability and weight savings.
{"title":"Synthesis and Experimental Investigation of Glass Fibre Epoxy/sawdust Composites for Flexural and Tensile Strength","authors":"Praveen Barmavatu, Sonali Deshmukh, M. Das, R. Aepuru, Venkat Reddy Ragireddy, B. Sravanthi","doi":"10.37358/mp.22.2.5586","DOIUrl":"https://doi.org/10.37358/mp.22.2.5586","url":null,"abstract":"\u0000Every day, the need for composite materials grows. The physical and chemical characteristics of the constituent materials inside the hybrid composite impact the final structure. The rate at which these individual properties are sustained varies, but it has an impact on the final properties of hybrid composites. Sporting goods and lightweight orthopaedic components are made from hybrid composites. Glass fibre epoxy and sawdust are utilised to construct hybrid composites in this study, using glass fibre to epoxy resin ratios of (60:40, 60:39, 60:38, 60:37).The current research involves the creation of hybrid composites and their study for flexural and tensile strength under various load conditions. Applying resin and hardener, as well as inserting reinforcement, is repeated in the hand-layup manufacturing process to improve characteristics and create a laminate form. They improve fatigue and fracture resistance while providing dimensional stability and weight savings.\u0000","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":" ","pages":""},"PeriodicalIF":0.8,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42166712","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Caramitu, I. Ion, A. Borş, Cristian Romeo Ciobanu, C. Schreiner, Mihaela Aradoaei, Ana-Maria Daniela Caramitu
Electromagnetic compatibility issues and those generated by these radiations are a major concern for electrical and electronic products, mainly in the fields of communications, information technology, transportation, security and medical services. The paper presents the way to obtain nanostructured paint/plastic/nanopowder paint systems with electromagnetic shielding properties, as well as their characterization by FTIR analysis, DSC and dielectric tests. These systems have Electro-magnetic Interference (EMI)/Electromagnetic Compatibility (EMC) and Electrostatic Discharge (ESD) applications in the manufacture of enclosures for various electronic devices and for the automotive industry. At the laboratory level, 4 non-additive experimental models (EM) coded M1-M4 and 16 additive experimental models coded M5-M20 were obtained. Revolutionary to these materials is the fact that inside they are insulating and, on the outside, they behave like a shield. The results obtained from the dielectric tests performed on the 16 additive systems showed that the samples with a maximum percentage (20 %) of metal nanopowders show the highest values of electrical conductivity. Of the two nanopowders used, that of Fe from samples M11, M12, M19 and M20 which induces the composite higher conductivities than Al nanopowders. The ATR/FTIR spectra of the two paint samples analyzed showed that they were almost identical, suggesting that the paints tested had the same basic chemical structure. DSC analysis showed that pigment paint (V2) has low thermal oxidation stability and lower decomposition temperatures than pigment-free paint (V1), therefore, V2 is less stable under usage conditions, under the influence of normal environmental factors (temperature, humidity, natural or artificial light, etc.) compared to V1.
{"title":"Physico-chemical Characterization of Paint Films with Electromagnetic Properties","authors":"A. Caramitu, I. Ion, A. Borş, Cristian Romeo Ciobanu, C. Schreiner, Mihaela Aradoaei, Ana-Maria Daniela Caramitu","doi":"10.37358/mp.22.2.5580","DOIUrl":"https://doi.org/10.37358/mp.22.2.5580","url":null,"abstract":"\u0000Electromagnetic compatibility issues and those generated by these radiations are a major concern for electrical and electronic products, mainly in the fields of communications, information technology, transportation, security and medical services. The paper presents the way to obtain nanostructured paint/plastic/nanopowder paint systems with electromagnetic shielding properties, as well as their characterization by FTIR analysis, DSC and dielectric tests. These systems have Electro-magnetic Interference (EMI)/Electromagnetic Compatibility (EMC) and Electrostatic Discharge (ESD) applications in the manufacture of enclosures for various electronic devices and for the automotive industry. At the laboratory level, 4 non-additive experimental models (EM) coded M1-M4 and 16 additive experimental models coded M5-M20 were obtained. Revolutionary to these materials is the fact that inside they are insulating and, on the outside, they behave like a shield. The results obtained from the dielectric tests performed on the 16 additive systems showed that the samples with a maximum percentage (20 %) of metal nanopowders show the highest values of electrical conductivity. Of the two nanopowders used, that of Fe from samples M11, M12, M19 and M20 which induces the composite higher conductivities than Al nanopowders. The ATR/FTIR spectra of the two paint samples analyzed showed that they were almost identical, suggesting that the paints tested had the same basic chemical structure. DSC analysis showed that pigment paint (V2) has low thermal oxidation stability and lower decomposition temperatures than pigment-free paint (V1), therefore, V2 is less stable under usage conditions, under the influence of normal environmental factors (temperature, humidity, natural or artificial light, etc.) compared to V1.\u0000","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":"1 1","pages":""},"PeriodicalIF":0.8,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41376142","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
T. R. Hidayani, B. Wirjosentono, D. Nasution, T. Tamrin
The search for green composite for sound-absorbing material has increased a significant interest. In this study, polystyrene (PS) composite foam filled with primary sludge and boiler ash from pulp mill was produced. The product was characterized using analytical techniques such as FTIR, XRD, SEM, TGA, and DSC, while the mechanical properties and sound-absorbing coefficient were analyzed regarding ASTM D 2240 and ASTM E-1050-98, respectively. The results showed that the sludge has 1β crystalline polymorph cellulose from the pulp. The chemical reaction can be seen by the chemical bond formed during the mixing process. The peak expansion occurred at 1600.44 cm-1 indicating the presence of a C=C functional group of maleic anhydride with polymer and filler. SEM images showed that the filler was distributed and dispersed into the polymer matrix and no agglomeration was produced. The sound-absorbing composites had complied ISO 11654:1997 regarding the sound absorption coefficient rating level on materials for rooms with sound absorption classes D and C with the value of α 0.328-0.793.
寻找用于吸声材料的绿色复合材料引起了人们的极大兴趣。本研究以纸浆厂的一次污泥和锅炉灰为原料，制备了聚苯乙烯（PS）复合泡沫。使用FTIR、XRD、SEM、TGA和DSC等分析技术对产物进行表征，同时分别根据ASTM D 2240和ASTM E-1050-98分析机械性能和吸声系数。结果表明，污泥中含有1β晶型纤维素。化学反应可以通过混合过程中形成的化学键来观察。峰膨胀发生在1600.44cm-1处，表明马来酸酐与聚合物和填料存在C=C官能团。SEM图像显示，填料分布并分散在聚合物基体中，没有产生团聚。吸声复合材料符合ISO 11654-1997关于吸声等级为D和C的房间材料的吸声系数等级的规定，其值为α0.328-0.793。
{"title":"Acoustic and Mechanical Properties of Polystyrene Composite Filled with Primary Sludge and Boiler Ash from Pulp Mill","authors":"T. R. Hidayani, B. Wirjosentono, D. Nasution, T. Tamrin","doi":"10.37358/mp.22.2.5592","DOIUrl":"https://doi.org/10.37358/mp.22.2.5592","url":null,"abstract":"\u0000The search for green composite for sound-absorbing material has increased a significant interest. In this study, polystyrene (PS) composite foam filled with primary sludge and boiler ash from pulp mill was produced. The product was characterized using analytical techniques such as FTIR, XRD, SEM, TGA, and DSC, while the mechanical properties and sound-absorbing coefficient were analyzed regarding ASTM D 2240 and ASTM E-1050-98, respectively. The results showed that the sludge has 1β crystalline polymorph cellulose from the pulp. The chemical reaction can be seen by the chemical bond formed during the mixing process. The peak expansion occurred at 1600.44 cm-1 indicating the presence of a C=C functional group of maleic anhydride with polymer and filler. SEM images showed that the filler was distributed and dispersed into the polymer matrix and no agglomeration was produced. The sound-absorbing composites had complied ISO 11654:1997 regarding the sound absorption coefficient rating level on materials for rooms with sound absorption classes D and C with the value of α 0.328-0.793.\u0000","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":" ","pages":""},"PeriodicalIF":0.8,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43123370","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：