Pub Date : 2017-06-01DOI: 10.1109/ICIEA.2017.8283099
Xiang-yang Du, Quan Chen, Guoli Li, Cungang Hu, Qiubo Ye
With the rapid development of new power electronic devices, the application of high frequency switches has become more and more extensive, so it is very important to control the turn-on and turn-off losses of power electronic devices. In this paper, a new type of switching control for closed loop turn-on di/dt and turn-off du/dt is put forward after the IGBT (Insulated Gate Bipolar Transistor) drive circuit is deeply studied. An inductor is connected at the emitter of IGBT as feedback sampling, and the control of the IGBT turn-on is realized through a few auxiliary circuits. A capacitor is connected between the collector and the gate of the IGBT as feedback sampling, and the control of the IGBT turn-off is realized through a few auxiliary circuits. Multisim software is used for simulation and simulation results verify the correctness of theoretical analysis. The driving circuit can realize the mutual independence between the two closed loop control methods, which reduces the losses of IGBT in the turn-on and turn-off. Reducing losses has important significance to the operation efficiency, reliability and safety of the power supply at the same time.
{"title":"Closed loop control method of turn-on di/dt and turn-off du/dt for insulated gate bipolar transistors","authors":"Xiang-yang Du, Quan Chen, Guoli Li, Cungang Hu, Qiubo Ye","doi":"10.1109/ICIEA.2017.8283099","DOIUrl":"https://doi.org/10.1109/ICIEA.2017.8283099","url":null,"abstract":"With the rapid development of new power electronic devices, the application of high frequency switches has become more and more extensive, so it is very important to control the turn-on and turn-off losses of power electronic devices. In this paper, a new type of switching control for closed loop turn-on di/dt and turn-off du/dt is put forward after the IGBT (Insulated Gate Bipolar Transistor) drive circuit is deeply studied. An inductor is connected at the emitter of IGBT as feedback sampling, and the control of the IGBT turn-on is realized through a few auxiliary circuits. A capacitor is connected between the collector and the gate of the IGBT as feedback sampling, and the control of the IGBT turn-off is realized through a few auxiliary circuits. Multisim software is used for simulation and simulation results verify the correctness of theoretical analysis. The driving circuit can realize the mutual independence between the two closed loop control methods, which reduces the losses of IGBT in the turn-on and turn-off. Reducing losses has important significance to the operation efficiency, reliability and safety of the power supply at the same time.","PeriodicalId":443463,"journal":{"name":"2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA)","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116451650","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Software testing is an important method to guarantee software quality. For the large-scale complex software, some mistakes or errors will easily be overlooked if programs are detected only by manual work. Therefore, a full-automatic system is necessary to rapidly cover all program logics through calculation to achieve input and output; besides, the system can assist to generate a large number of test cases before manual intervention, and can find out some software defects to assist manual detection to complete compiling work of all test cases. In this paper, a combination of the static structure of procedure and improved genetic algorithm is proposed in order to implement a fully automatic test case generating technology, enhance the generating efficiency and coverage rate of codes, and also can help to save a lot of time in manual testing.
{"title":"A method for test case generation by improved genetic algorithm based on static structure of procedure","authors":"Wen Jing, Zhang Yikun, Zhao Ming, Chen Hao, Hei Xin-hong, Jianxiong Shen","doi":"10.1109/ICIEA.2017.8283076","DOIUrl":"https://doi.org/10.1109/ICIEA.2017.8283076","url":null,"abstract":"Software testing is an important method to guarantee software quality. For the large-scale complex software, some mistakes or errors will easily be overlooked if programs are detected only by manual work. Therefore, a full-automatic system is necessary to rapidly cover all program logics through calculation to achieve input and output; besides, the system can assist to generate a large number of test cases before manual intervention, and can find out some software defects to assist manual detection to complete compiling work of all test cases. In this paper, a combination of the static structure of procedure and improved genetic algorithm is proposed in order to implement a fully automatic test case generating technology, enhance the generating efficiency and coverage rate of codes, and also can help to save a lot of time in manual testing.","PeriodicalId":443463,"journal":{"name":"2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129814560","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-06-01DOI: 10.1109/ICIEA.2017.8283035
Ding Wen-ying, T. Chao, Feng Ai-lan
To use the unallocated coils effectively is of great importance in ERW steel tubing enterprises. Aiming at solving the problem, an effective method of order-coil matching is to be proposed. This paper established a nonlinear integer programming model for the maximum order fulfillment rate or the maximum utilization of the coil. According to the characters of the model, an adaptive genetic algorithm based on the heuristic repair strategy was proposed. Finally, the feasibility and effectiveness of the proposed algorithm were verified based on actual production data. This study will improve the timely delivery capability of enterprise; be helpful to address the liquidity shortage, occupiers and other issues which are caused by the large number of unallocated coils. The results show that it will effectively decrease the waste of coils and bring considerable economic benefits to this kind of enterprises
{"title":"Effective use of unallocated coils in ERW steel tubing enterprises","authors":"Ding Wen-ying, T. Chao, Feng Ai-lan","doi":"10.1109/ICIEA.2017.8283035","DOIUrl":"https://doi.org/10.1109/ICIEA.2017.8283035","url":null,"abstract":"To use the unallocated coils effectively is of great importance in ERW steel tubing enterprises. Aiming at solving the problem, an effective method of order-coil matching is to be proposed. This paper established a nonlinear integer programming model for the maximum order fulfillment rate or the maximum utilization of the coil. According to the characters of the model, an adaptive genetic algorithm based on the heuristic repair strategy was proposed. Finally, the feasibility and effectiveness of the proposed algorithm were verified based on actual production data. This study will improve the timely delivery capability of enterprise; be helpful to address the liquidity shortage, occupiers and other issues which are caused by the large number of unallocated coils. The results show that it will effectively decrease the waste of coils and bring considerable economic benefits to this kind of enterprises","PeriodicalId":443463,"journal":{"name":"2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA)","volume":"57 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127051744","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-06-01DOI: 10.1109/ICIEA.2017.8283026
Qinghua Zhang, Xiaodan Lv, Juan Shi
For the problem of high inventory level of mining machinery maintenance spare parts in the enterprises, an inventory sharing model is built based on distributed storage and ordering strategy of (R, S). To manage the spare parts inventories, a shared alliance center is established in the enterprises according to the inventory and order point. The centralized ordering model is established in order to minimize the inventory cost, and the optimal order quantity is solved by genetic algorithm.
{"title":"Research on inventory sharing model of frequent mining machinery maintenance spare parts","authors":"Qinghua Zhang, Xiaodan Lv, Juan Shi","doi":"10.1109/ICIEA.2017.8283026","DOIUrl":"https://doi.org/10.1109/ICIEA.2017.8283026","url":null,"abstract":"For the problem of high inventory level of mining machinery maintenance spare parts in the enterprises, an inventory sharing model is built based on distributed storage and ordering strategy of (R, S). To manage the spare parts inventories, a shared alliance center is established in the enterprises according to the inventory and order point. The centralized ordering model is established in order to minimize the inventory cost, and the optimal order quantity is solved by genetic algorithm.","PeriodicalId":443463,"journal":{"name":"2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127081310","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-06-01DOI: 10.1109/ICIEA.2017.8282875
Weihai Chen, Zheng Zhao, Zhong Liu, Peter C. Y. Chen
On-ramps are area of frequent traffic congestion. Proper traffic guidance around on-ramp merging areas exerts a positive effect on the relief of traffic congestion. The objective of this paper is to design an assistive ramp-merging control (ARMCON) system. It utilizes knowledge about professional driver behavior and the dynamical relationship among the on-ramp vehicles, to produce timely information so as to guide the on-ramp drivers when merging with the main traffic flow. Under the guidance of ARMCON, disruption of the main traffic on the express way is minimized while a certain merging rate is maintained.
{"title":"A novel assistive on-ramp merging control system for dense traffic management","authors":"Weihai Chen, Zheng Zhao, Zhong Liu, Peter C. Y. Chen","doi":"10.1109/ICIEA.2017.8282875","DOIUrl":"https://doi.org/10.1109/ICIEA.2017.8282875","url":null,"abstract":"On-ramps are area of frequent traffic congestion. Proper traffic guidance around on-ramp merging areas exerts a positive effect on the relief of traffic congestion. The objective of this paper is to design an assistive ramp-merging control (ARMCON) system. It utilizes knowledge about professional driver behavior and the dynamical relationship among the on-ramp vehicles, to produce timely information so as to guide the on-ramp drivers when merging with the main traffic flow. Under the guidance of ARMCON, disruption of the main traffic on the express way is minimized while a certain merging rate is maintained.","PeriodicalId":443463,"journal":{"name":"2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA)","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127272494","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-06-01DOI: 10.1109/ICIEA.2017.8282901
N. Somnath, R. Sreenivas
The refinement procedure of Suzuki and Murata [1] combines two Petri Nets (PNs) N1(m01) and N2(m02) in a prescribed manner to obtain a PN N3(m03). Under appropriate conditions, the liveness of the PNs N1(m01) and N2(m02) implies the liveness of the PN N3(m03). A PN that is not live, can be made live by a liveness enforcing supervisory policy (LESP). In this paper, we develop the results of Suzuki and Murata to yield a class of PNs for which an LESP for N3(m03) can be represented in terms of local-LESPs for N1(m01) and N2(m02).
{"title":"Synthesis of liveness enforcing supervisory policies in Petri nets by stepwise refinement","authors":"N. Somnath, R. Sreenivas","doi":"10.1109/ICIEA.2017.8282901","DOIUrl":"https://doi.org/10.1109/ICIEA.2017.8282901","url":null,"abstract":"The refinement procedure of Suzuki and Murata [1] combines two Petri Nets (PNs) N<inf>1</inf>(m<sup>0</sup><inf>1</inf>) and N<inf>2</inf>(m<sup>0</sup><inf>2</inf>) in a prescribed manner to obtain a PN N<inf>3</inf>(m<sup>0</sup><inf>3</inf>). Under appropriate conditions, the liveness of the PNs N<inf>1</inf>(m<sup>0</sup><inf>1</inf>) and N<inf>2</inf>(m<sup>0</sup><inf>2</inf>) implies the liveness of the PN N<inf>3</inf>(m<sup>0</sup><inf>3</inf>). A PN that is not live, can be made live by a liveness enforcing supervisory policy (LESP). In this paper, we develop the results of Suzuki and Murata to yield a class of PNs for which an LESP for N<inf>3</inf>(m<sup>0</sup><inf>3</inf>) can be represented in terms of local-LESPs for N<inf>1</inf>(m<sup>0</sup><inf>1</inf>) and N<inf>2</inf>(m<sup>0</sup><inf>2</inf>).","PeriodicalId":443463,"journal":{"name":"2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130146617","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-06-01DOI: 10.1109/ICIEA.2017.8283029
Atiencia Villagomez, J. Miguel, S. Elena
This paper presents the multi-criteria genetic algorithm for the synthesis of logic-functional control system by the network operator method. The algorithm is designed for the simultaneous finding two network operators. One network operator describes a multidimensional algebraic function for functional control system. Another network operator describes a multidimensional logic function for the subsystem logical choice. Variation principle of the basic solution is used. An algorithm contains an additional indication vector that indicates the basic solution to which it is necessary to apply a certain variation. For the selection of the best solutions rank criterion is used. The result of the algorithm is a Pareto set, which consists of solutions with zero ranks. An example of the logic-functional control system of the quadcopter movement over spatial trajectory is given.
{"title":"Genetic algorithm for the synthesis of logic-functional control system of dynamic object","authors":"Atiencia Villagomez, J. Miguel, S. Elena","doi":"10.1109/ICIEA.2017.8283029","DOIUrl":"https://doi.org/10.1109/ICIEA.2017.8283029","url":null,"abstract":"This paper presents the multi-criteria genetic algorithm for the synthesis of logic-functional control system by the network operator method. The algorithm is designed for the simultaneous finding two network operators. One network operator describes a multidimensional algebraic function for functional control system. Another network operator describes a multidimensional logic function for the subsystem logical choice. Variation principle of the basic solution is used. An algorithm contains an additional indication vector that indicates the basic solution to which it is necessary to apply a certain variation. For the selection of the best solutions rank criterion is used. The result of the algorithm is a Pareto set, which consists of solutions with zero ranks. An example of the logic-functional control system of the quadcopter movement over spatial trajectory is given.","PeriodicalId":443463,"journal":{"name":"2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA)","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126925118","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-06-01DOI: 10.1109/ICIEA.2017.8283162
Dawei Sun, Vincent C. S. Lee, Ye Lu
Trend and outlier are frequently used to derive early warning predictive signal to decision maker in order to achieve ultimate quality decision outcome in domain specific (e.g. commercial, scientific, biomedical and engineering, just to name a few) applications. We develop a gradient-based algorithm using sample entropy gradient(SEG) for trend and outlier prediction in high frequency time series data streams. L2 similarity measure (Euclidean distance between two linearized gradient curves is then computed and used to quantify the degree of similarity and compared with a threshold L2 value to judge the extend of dissimilarity that would be classified as outlier. SEG algorithm which circumvents the need to pre-specify tolerance parameter in those cross sample entropy (CSE)-based algorithms that invariably involve real domain expert to set the tolerance threshold. We conduct real data experiments on SEG algorithm to two application areas: dynamic wind speed data stream; and financial time series data. Our experiments demonstrated that SEG algorithm can be feasibly used in online implementation to derive predictive early warning signals to domain-specific decision maker.
在特定领域（如商业、科学、生物医学和工程，仅举几例）的应用中，趋势和离群值经常被用来为决策者提供预警预测信号，以实现高质量的最终决策结果。我们利用样本熵梯度（SEG）开发了一种基于梯度的算法，用于预测高频时间序列数据流中的趋势和异常值。然后计算 L2 相似度量（两条线性化梯度曲线之间的欧氏距离），并将其用于量化相似度，然后与阈值 L2 值进行比较，以判断将被归类为离群值的相似度范围。SEG 算法避免了那些基于交叉样本熵（CSE）的算法中预先指定容差参数的需要，因为这些算法总是需要实际领域的专家来设置容差阈值。我们在两个应用领域对 SEG 算法进行了真实数据实验：动态风速数据流和金融时间序列数据。实验结果表明，SEG 算法可用于在线实施，为特定领域的决策者提供预测性预警信号。
{"title":"A gradient-based algorithm for trend and outlier prediction in dynamic data streams","authors":"Dawei Sun, Vincent C. S. Lee, Ye Lu","doi":"10.1109/ICIEA.2017.8283162","DOIUrl":"https://doi.org/10.1109/ICIEA.2017.8283162","url":null,"abstract":"Trend and outlier are frequently used to derive early warning predictive signal to decision maker in order to achieve ultimate quality decision outcome in domain specific (e.g. commercial, scientific, biomedical and engineering, just to name a few) applications. We develop a gradient-based algorithm using sample entropy gradient(SEG) for trend and outlier prediction in high frequency time series data streams. L2 similarity measure (Euclidean distance between two linearized gradient curves is then computed and used to quantify the degree of similarity and compared with a threshold L2 value to judge the extend of dissimilarity that would be classified as outlier. SEG algorithm which circumvents the need to pre-specify tolerance parameter in those cross sample entropy (CSE)-based algorithms that invariably involve real domain expert to set the tolerance threshold. We conduct real data experiments on SEG algorithm to two application areas: dynamic wind speed data stream; and financial time series data. Our experiments demonstrated that SEG algorithm can be feasibly used in online implementation to derive predictive early warning signals to domain-specific decision maker.","PeriodicalId":443463,"journal":{"name":"2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA)","volume":"30 3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130388500","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-06-01DOI: 10.1109/ICIEA.2017.8282936
P. I. Chang, Z.-H. Chaing
In order to provide speed and accuracy in a long-stroke precision positioning system, the Dual-Stage Actuator (DSA) design have been utilized widely in different industrial applications. This paper uses the Fast Non-singular Terminal Sliding Mode (FNTSM) controller, a known robust method, for controlling such a DSA system, applied to track a s-shaped reference trajectory. A full controller design is derived for this DSA system, and further analysis with the selection criteria of the controller parameters for the DSA improves the tracking performance over traditional PID and Non-Singular Terminal Sliding Mode (NTFS) ones. Simulation results demonstrate the FNTSM controller feasibility and verify its robustness, especially accounting the relative distance between the two actuators. An order of magnitude improvement on error and relative distance is shown when the DSA system is accelerating and decelerating on the s-shaped trajectory movement.
{"title":"Robust sliding mode controller design of a dual-stage actuator system for S-curve tracking","authors":"P. I. Chang, Z.-H. Chaing","doi":"10.1109/ICIEA.2017.8282936","DOIUrl":"https://doi.org/10.1109/ICIEA.2017.8282936","url":null,"abstract":"In order to provide speed and accuracy in a long-stroke precision positioning system, the Dual-Stage Actuator (DSA) design have been utilized widely in different industrial applications. This paper uses the Fast Non-singular Terminal Sliding Mode (FNTSM) controller, a known robust method, for controlling such a DSA system, applied to track a s-shaped reference trajectory. A full controller design is derived for this DSA system, and further analysis with the selection criteria of the controller parameters for the DSA improves the tracking performance over traditional PID and Non-Singular Terminal Sliding Mode (NTFS) ones. Simulation results demonstrate the FNTSM controller feasibility and verify its robustness, especially accounting the relative distance between the two actuators. An order of magnitude improvement on error and relative distance is shown when the DSA system is accelerating and decelerating on the s-shaped trajectory movement.","PeriodicalId":443463,"journal":{"name":"2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA)","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130453746","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-06-01DOI: 10.1109/ICIEA.2017.8283039
Chunling Yang, Hongyi Sun, Min Zhu
In order to improve the high-precision resistance calibrator system, the error analysis model is established for each part of the hardware circuit and the calculation result of the output error of the resistance calibrator circuit is given in this paper. In order to further improve the precision of the resistance calibrator system, the error distribution scheme is proposed based on the principle of error distribution and feasibility analysis is also verified, which makes the resistance calibrator system meet the index and requirements.
{"title":"High-precision resistance calibrator error analysis and error distribution technology research","authors":"Chunling Yang, Hongyi Sun, Min Zhu","doi":"10.1109/ICIEA.2017.8283039","DOIUrl":"https://doi.org/10.1109/ICIEA.2017.8283039","url":null,"abstract":"In order to improve the high-precision resistance calibrator system, the error analysis model is established for each part of the hardware circuit and the calculation result of the output error of the resistance calibrator circuit is given in this paper. In order to further improve the precision of the resistance calibrator system, the error distribution scheme is proposed based on the principle of error distribution and feasibility analysis is also verified, which makes the resistance calibrator system meet the index and requirements.","PeriodicalId":443463,"journal":{"name":"2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA)","volume":"96 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127862102","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：