Purpose This paper aims to evaluate the level of compliance of fire safety with the legal requirements in Malaysia government hospital buildings by evaluating via fire risk management. Design/methodology/approach Five government hospitals were selected. These five hospitals were selected due to the location of Penang, which is one of the fast-growing states in Malaysia (Salleh, 2019; Ebekozien, 2019). This state is the second most densely populated state after Wilayah Persekutuan Kuala Lumpur, with an average distribution of 1,490 persons per square km. This higher population caused the higher demand on the health-care services by the public (DOSM, 2016). The observation and building audit processes are as described. Hundreds of photos were taken for qualitative analysis, and all fire safety elements were measured for the descriptive analysis for each hospital. The framework of audit elements is created based on the Life Safety Code: NFPA 101 (2018), UBBL 1984: Part VII (Fire Requirements) and Part VIIII (Fire Alarms, Fire Detection, Fire Extinguishment and Fire Fighting Access). The cross-sectional descriptive evaluation is conducted in the case studies building in accordance with Life Safety Code of NFPA, also known as NFPA 101. To conduct the study, the information needed to assess the fire safety status was extracted from the CFSES software based on the NFPA 101 standard and prepared and compiled by the researcher as a checklist. In the next stage, gathered information was analysed using Computerised Fire Safety Evaluation System (CFSES) software. This method was developed based on the NFPA 101 standard and evaluated the fire risk from four dimensions of containment, extinguishment, people movement and general safety. This software gives the risk assessment results in three areas of fire control, exits and general safety. To assess the fire risk of the commercial buildings after entering the background information (height, age, number of stories, etc.) in the software, the software first calculates the score that the building should obtain in the three aspects of fire control, exit routes and general safety (minimum score required). Findings The utmost zones in the case studies (44.3%) occupied by limited mobility are located at low-rise buildings or at the first floor to third floor of the hospital buildings. Hospitals managements lacked in creating the maximum exit route and egress the occupants to disclosed the building during evacuation, it correlates to the patients' mobility positions strategy to assign their categories that fell on effortless mobilisation. Surveyed hospitals were built with the non-combustible materials, even though four of the case studies were built before 1984. Hospitals were equipped with hazard separations and vertical smoke pores, and in most of the zones, sprinkler system is installed only in the corridors, equipped with communication system and system of communication with fire and relief organisations and has
{"title":"Fire risk assessment of Malaysia public hospital buildings","authors":"Naziah Salleh, Agus Salim Nuzaihan Aras, Norsafiah Norazman, Syahrul Nizam Kamaruzzaman","doi":"10.1108/jfm-11-2021-0138","DOIUrl":"https://doi.org/10.1108/jfm-11-2021-0138","url":null,"abstract":"Purpose This paper aims to evaluate the level of compliance of fire safety with the legal requirements in Malaysia government hospital buildings by evaluating via fire risk management. Design/methodology/approach Five government hospitals were selected. These five hospitals were selected due to the location of Penang, which is one of the fast-growing states in Malaysia (Salleh, 2019; Ebekozien, 2019). This state is the second most densely populated state after Wilayah Persekutuan Kuala Lumpur, with an average distribution of 1,490 persons per square km. This higher population caused the higher demand on the health-care services by the public (DOSM, 2016). The observation and building audit processes are as described. Hundreds of photos were taken for qualitative analysis, and all fire safety elements were measured for the descriptive analysis for each hospital. The framework of audit elements is created based on the Life Safety Code: NFPA 101 (2018), UBBL 1984: Part VII (Fire Requirements) and Part VIIII (Fire Alarms, Fire Detection, Fire Extinguishment and Fire Fighting Access). The cross-sectional descriptive evaluation is conducted in the case studies building in accordance with Life Safety Code of NFPA, also known as NFPA 101. To conduct the study, the information needed to assess the fire safety status was extracted from the CFSES software based on the NFPA 101 standard and prepared and compiled by the researcher as a checklist. In the next stage, gathered information was analysed using Computerised Fire Safety Evaluation System (CFSES) software. This method was developed based on the NFPA 101 standard and evaluated the fire risk from four dimensions of containment, extinguishment, people movement and general safety. This software gives the risk assessment results in three areas of fire control, exits and general safety. To assess the fire risk of the commercial buildings after entering the background information (height, age, number of stories, etc.) in the software, the software first calculates the score that the building should obtain in the three aspects of fire control, exit routes and general safety (minimum score required). Findings The utmost zones in the case studies (44.3%) occupied by limited mobility are located at low-rise buildings or at the first floor to third floor of the hospital buildings. Hospitals managements lacked in creating the maximum exit route and egress the occupants to disclosed the building during evacuation, it correlates to the patients' mobility positions strategy to assign their categories that fell on effortless mobilisation. Surveyed hospitals were built with the non-combustible materials, even though four of the case studies were built before 1984. Hospitals were equipped with hazard separations and vertical smoke pores, and in most of the zones, sprinkler system is installed only in the corridors, equipped with communication system and system of communication with fire and relief organisations and has ","PeriodicalId":46544,"journal":{"name":"Journal of Facilities Management","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-05-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135195853","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-05-12DOI: 10.1108/jfm-09-2022-0100
A. S. Kukah, D. Owusu-Manu, E. Badu, D. J. Edwards, E. Asamoah, Andrew Anafo, Dominic Kuutiero, Richmond Makafui Kofi Kukah
Purpose In comparison to other countries, power generation in Sub-Sahara Africa is poor. Public–private partnership (PPP) model has become increasingly popular for addressing infrastructural challenges, especially in the power sector. The purpose of this study is to evaluate and classify the factors that influence public sector involvement in Ghanaian PPP power projects. Design/methodology/approach Using purposive and snowball sampling techniques, questionnaires were used to gather responses from experts in the PPP power sector in a two round Delphi survey. Analytical tools adopted were descriptive statistics, mean score ranking, Cronbach’s alpha and factor analysis. Findings The most significant factors that influence public sector involvement in PPP power projects were: achieving improved value for money; access to additional capital; increased certainty of projects; greater efficiency of project delivery services; and improved ability to deliver new infrastructure. From factor analysis, the four components were: value for money and efficiency; capital and skills; innovation and technology; and project delivery. Originality/value Government bodies in the power sector will benefit from the findings, as it would aid them develop policies that would strengthen regulatory structures as well as institutions.
{"title":"Evaluating the factors that influence public sector involvement in Ghanaian public-private partnership (PPP) power projects","authors":"A. S. Kukah, D. Owusu-Manu, E. Badu, D. J. Edwards, E. Asamoah, Andrew Anafo, Dominic Kuutiero, Richmond Makafui Kofi Kukah","doi":"10.1108/jfm-09-2022-0100","DOIUrl":"https://doi.org/10.1108/jfm-09-2022-0100","url":null,"abstract":"\u0000Purpose\u0000In comparison to other countries, power generation in Sub-Sahara Africa is poor. Public–private partnership (PPP) model has become increasingly popular for addressing infrastructural challenges, especially in the power sector. The purpose of this study is to evaluate and classify the factors that influence public sector involvement in Ghanaian PPP power projects.\u0000\u0000\u0000Design/methodology/approach\u0000Using purposive and snowball sampling techniques, questionnaires were used to gather responses from experts in the PPP power sector in a two round Delphi survey. Analytical tools adopted were descriptive statistics, mean score ranking, Cronbach’s alpha and factor analysis.\u0000\u0000\u0000Findings\u0000The most significant factors that influence public sector involvement in PPP power projects were: achieving improved value for money; access to additional capital; increased certainty of projects; greater efficiency of project delivery services; and improved ability to deliver new infrastructure. From factor analysis, the four components were: value for money and efficiency; capital and skills; innovation and technology; and project delivery.\u0000\u0000\u0000Originality/value\u0000Government bodies in the power sector will benefit from the findings, as it would aid them develop policies that would strengthen regulatory structures as well as institutions.\u0000","PeriodicalId":46544,"journal":{"name":"Journal of Facilities Management","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2023-05-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49476097","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-05-11DOI: 10.1108/jfm-08-2022-0089
Norsafiah Norazman, Siti Nurul Asma’ Mohd Nashruddin, A. Che-Ani
Purpose Urban population growth has increased housing density, which has expanded the construction of low-cost low-rise residential in urban areas. Good building performance and effective low-cost low-rise residential quality lead to higher user satisfaction and improve building sustainability. This study aims to focus on the factors influencing the sustainability of low-cost low-rise residential in the West Malaysia urban area to assess resident satisfaction. Design/methodology/approach A mixed-mode approach with both qualitative and quantitative were used in this study. Semi-structured interviews were conducted with 12 stakeholders to identify the common factors influencing sustainability in low-cost low-rise residential. Subsequently, questionnaire surveys were formed and distributed among building users to determine the satisfaction level with low-cost low-rise residential building performance. Findings The finding demonstrates that accessibility is the key factor to achieving sustainability of low-cost low-rise residential. The finding also related to the factor that influences both stakeholders and building user satisfaction levels. This study also identifies key areas that require attention to improve user satisfaction with building sustainability and building performance of low-cost low-rise residential. Originality/value This study aims to determine stakeholder and building user satisfaction levels in relation to the sustainable building factor. A few indicators have been set up to identify the factors that most influence the sustainability and environment of low-cost low-rise residential buildings. Each subchapter has a few recommendations to improve the performance of low-cost low-rise residential. Each of the factors mentioned is related to social, economic and environmental sustainability. In addition, the study discovered a strong connection between low-cost low-rise residential performance and user satisfaction.
{"title":"Exploring the factors influencing building sustainability of low-cost low-rise residential towards user satisfaction","authors":"Norsafiah Norazman, Siti Nurul Asma’ Mohd Nashruddin, A. Che-Ani","doi":"10.1108/jfm-08-2022-0089","DOIUrl":"https://doi.org/10.1108/jfm-08-2022-0089","url":null,"abstract":"\u0000Purpose\u0000Urban population growth has increased housing density, which has expanded the construction of low-cost low-rise residential in urban areas. Good building performance and effective low-cost low-rise residential quality lead to higher user satisfaction and improve building sustainability. This study aims to focus on the factors influencing the sustainability of low-cost low-rise residential in the West Malaysia urban area to assess resident satisfaction.\u0000\u0000\u0000Design/methodology/approach\u0000A mixed-mode approach with both qualitative and quantitative were used in this study. Semi-structured interviews were conducted with 12 stakeholders to identify the common factors influencing sustainability in low-cost low-rise residential. Subsequently, questionnaire surveys were formed and distributed among building users to determine the satisfaction level with low-cost low-rise residential building performance.\u0000\u0000\u0000Findings\u0000The finding demonstrates that accessibility is the key factor to achieving sustainability of low-cost low-rise residential. The finding also related to the factor that influences both stakeholders and building user satisfaction levels. This study also identifies key areas that require attention to improve user satisfaction with building sustainability and building performance of low-cost low-rise residential.\u0000\u0000\u0000Originality/value\u0000This study aims to determine stakeholder and building user satisfaction levels in relation to the sustainable building factor. A few indicators have been set up to identify the factors that most influence the sustainability and environment of low-cost low-rise residential buildings. Each subchapter has a few recommendations to improve the performance of low-cost low-rise residential. Each of the factors mentioned is related to social, economic and environmental sustainability. In addition, the study discovered a strong connection between low-cost low-rise residential performance and user satisfaction.\u0000","PeriodicalId":46544,"journal":{"name":"Journal of Facilities Management","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2023-05-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47048895","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-04-14DOI: 10.1108/jfm-10-2022-0107
Obinna C. Madubuike, C. Anumba, E. Agapaki
Purpose This paper aims to focus on identifying key health-care issues amenable to digital twin (DT) approach. It starts with a description of the concept and enabling technologies of a DT and then discusses potential applications of DT solutions in healthcare facilities management (FM) using four different scenarios. The scenario planning focused on monitoring and controlling the heating, ventilation, and air-conditioning system in real-time; monitoring indoor air quality (IAQ) to monitor the performance of medical equipment; monitoring and tracking pulsed light for SARS-Cov-2; and monitoring the performance of medical equipment affected by radio frequency interference (RFI). Design/methodology/approach The importance of a healthcare facility, its systems and equipment necessitates an effective FM practice. However, the FM practices adopted have several areas for improvement, including the lack of effective real-time updates on performance status, asset tracking, bi-directional coordination of changes in the physical facilities and the computational resources that support and monitor them. Consequently, there is a need for more intelligent and holistic FM systems. We propose a DT which possesses the key features, such as real-time updates and bi-directional coordination, which can address the shortcomings in healthcare FM. DT represents a virtual model of a physical component and replicates the physical data and behavior in all instances. The replication is attained using sensors to obtain data from the physical component and replicating the physical component's behavior through data analysis and simulation. This paper focused on identifying key healthcare issues amenable to DT approach. It starts with a description of the concept and enabling technologies of a DT and then discusses potential applications of DT solutions in healthcare FM using four different scenarios. Findings The scenarios were validated by industry experts and concluded that the scenarios offer significant potential benefits for the deployment of DT in healthcare FM such as monitoring facilities’ performance in real-time and improving visualization by integrating the 3D model. Research limitations/implications In addition to inadequate literature addressing healthcare FM, the study was also limited to one of the healthcare facilities of a large public university, and the scope of the study was limited to IAQ including pressure, relative humidity, carbon dioxide and temperature. Additionally, the study showed the potential benefits of DT application in healthcare FM using various scenarios that DT experts validated. Practical implications The study shows the practical implication using the various validated scenarios and identified enabling technologies. The combination and implementation of those mentioned above would create a system that can effectively help manage facilities and improve facilities' performances. Social implications The only identifiable social so
{"title":"Scenarios for digital twin deployment in healthcare facilities management","authors":"Obinna C. Madubuike, C. Anumba, E. Agapaki","doi":"10.1108/jfm-10-2022-0107","DOIUrl":"https://doi.org/10.1108/jfm-10-2022-0107","url":null,"abstract":"\u0000Purpose\u0000This paper aims to focus on identifying key health-care issues amenable to digital twin (DT) approach. It starts with a description of the concept and enabling technologies of a DT and then discusses potential applications of DT solutions in healthcare facilities management (FM) using four different scenarios. The scenario planning focused on monitoring and controlling the heating, ventilation, and air-conditioning system in real-time; monitoring indoor air quality (IAQ) to monitor the performance of medical equipment; monitoring and tracking pulsed light for SARS-Cov-2; and monitoring the performance of medical equipment affected by radio frequency interference (RFI).\u0000\u0000\u0000Design/methodology/approach\u0000The importance of a healthcare facility, its systems and equipment necessitates an effective FM practice. However, the FM practices adopted have several areas for improvement, including the lack of effective real-time updates on performance status, asset tracking, bi-directional coordination of changes in the physical facilities and the computational resources that support and monitor them. Consequently, there is a need for more intelligent and holistic FM systems. We propose a DT which possesses the key features, such as real-time updates and bi-directional coordination, which can address the shortcomings in healthcare FM. DT represents a virtual model of a physical component and replicates the physical data and behavior in all instances. The replication is attained using sensors to obtain data from the physical component and replicating the physical component's behavior through data analysis and simulation. This paper focused on identifying key healthcare issues amenable to DT approach. It starts with a description of the concept and enabling technologies of a DT and then discusses potential applications of DT solutions in healthcare FM using four different scenarios.\u0000\u0000\u0000Findings\u0000The scenarios were validated by industry experts and concluded that the scenarios offer significant potential benefits for the deployment of DT in healthcare FM such as monitoring facilities’ performance in real-time and improving visualization by integrating the 3D model.\u0000\u0000\u0000Research limitations/implications\u0000In addition to inadequate literature addressing healthcare FM, the study was also limited to one of the healthcare facilities of a large public university, and the scope of the study was limited to IAQ including pressure, relative humidity, carbon dioxide and temperature. Additionally, the study showed the potential benefits of DT application in healthcare FM using various scenarios that DT experts validated.\u0000\u0000\u0000Practical implications\u0000The study shows the practical implication using the various validated scenarios and identified enabling technologies. The combination and implementation of those mentioned above would create a system that can effectively help manage facilities and improve facilities' performances.\u0000\u0000\u0000Social implications\u0000The only identifiable social so","PeriodicalId":46544,"journal":{"name":"Journal of Facilities Management","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2023-04-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43034917","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-04-11DOI: 10.1108/jfm-06-2022-0066
Amir Ghorbaniyan, Mohammadreza Abdoli, Hasan Valiyan, H. Boudlaie
Purpose In recent years, Corporate Citizenship has continued to grow in importance and significance. It has been the subject of considerable debate and commentary among researchers, corporate leaders and public institutions like NGOs and even capital market companies. The development of this concept in internal audit functions can improve the level of responsibility of companies. The purpose of this study is to design an internal audit model of a corporate citizen in Iranian capital market companies. Design/methodology/approach This research is methodologically in the category of developmental and combined research. In this study, two meta-synthesis and Delphi analyzes in the qualitative part and systematic representation analysis were used to determine the systematic relationships of the Internal Audit Corporate Citizen Components to strengthen environmental sustainability. Because of the mix of the data collection method in both qualitative and quantitative parts, the research participants in the qualitative part were 13 university experts in the field of accounting and 19 internal auditors of Iranian capital market companies who had specialized experience participated in the quantitative part. Findings The results in the qualitative section indicate the existence of 14 confirmed studies and the determination of 8 main components of the internal audit of the corporate citizen, during two stages of Delphi analysis, the level of reliability of the components was confirmed with the concept of internal audit of the corporate citizen. Based on the results of system representation model in quantitative part, it was determined that Environmental training to human resources is the primary stimulus for the system’s internal audit system representation to monitor the financial performance of the company to achieve environmental sustainability. Originality/value To the best of the authors’ knowledge, this is the first study to exemplify environmental sustainability by focusing on the concept of corporate citizen internal auditing. An area that, although of research importance in terms of developing theoretical literature and practical basis in reducing the financial reporting gap with an independent auditor, However, less research has been done on this issue and conducting this research and expanding it to the level of internal auditing profession can enhance the institutional and educational capacities on it at the international level and help to integrate the development of theoretical literature.
{"title":"Corporate citizen internal audit model: evidence from environmental functions Iran","authors":"Amir Ghorbaniyan, Mohammadreza Abdoli, Hasan Valiyan, H. Boudlaie","doi":"10.1108/jfm-06-2022-0066","DOIUrl":"https://doi.org/10.1108/jfm-06-2022-0066","url":null,"abstract":"\u0000Purpose\u0000In recent years, Corporate Citizenship has continued to grow in importance and significance. It has been the subject of considerable debate and commentary among researchers, corporate leaders and public institutions like NGOs and even capital market companies. The development of this concept in internal audit functions can improve the level of responsibility of companies. The purpose of this study is to design an internal audit model of a corporate citizen in Iranian capital market companies.\u0000\u0000\u0000Design/methodology/approach\u0000This research is methodologically in the category of developmental and combined research. In this study, two meta-synthesis and Delphi analyzes in the qualitative part and systematic representation analysis were used to determine the systematic relationships of the Internal Audit Corporate Citizen Components to strengthen environmental sustainability. Because of the mix of the data collection method in both qualitative and quantitative parts, the research participants in the qualitative part were 13 university experts in the field of accounting and 19 internal auditors of Iranian capital market companies who had specialized experience participated in the quantitative part.\u0000\u0000\u0000Findings\u0000The results in the qualitative section indicate the existence of 14 confirmed studies and the determination of 8 main components of the internal audit of the corporate citizen, during two stages of Delphi analysis, the level of reliability of the components was confirmed with the concept of internal audit of the corporate citizen. Based on the results of system representation model in quantitative part, it was determined that Environmental training to human resources is the primary stimulus for the system’s internal audit system representation to monitor the financial performance of the company to achieve environmental sustainability.\u0000\u0000\u0000Originality/value\u0000To the best of the authors’ knowledge, this is the first study to exemplify environmental sustainability by focusing on the concept of corporate citizen internal auditing. An area that, although of research importance in terms of developing theoretical literature and practical basis in reducing the financial reporting gap with an independent auditor, However, less research has been done on this issue and conducting this research and expanding it to the level of internal auditing profession can enhance the institutional and educational capacities on it at the international level and help to integrate the development of theoretical literature.\u0000","PeriodicalId":46544,"journal":{"name":"Journal of Facilities Management","volume":"1 1","pages":""},"PeriodicalIF":1.9,"publicationDate":"2023-04-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41666537","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-03-27DOI: 10.1108/jfm-07-2022-0076
C. Aigbavboa, Andrew Ebekozien, N. Mkhize
Purpose Aerospace is a demanding technological and industrial sector. Several regulations and policies via innovative digital transformation have been integrated to impact production systems and supply chains, including safety measures. Studies demonstrated that the Fourth Industrial Revolution (4IR) technologies could enhance productivity growth and safety measures. The 4IR role in influencing airlines’ growth is yet to receive in-depth studies in South Africa. Thus, this study aims to investigate the role of 4IR technologies in influencing airlines’ growth in South Africa. Design/methodology/approach This research used a qualitative research method. Primary data were compiled via 56 face-to-face semi-structured interviews with major stakeholders. The study achieved saturation. A thematic method was used to analyse the collected data. Findings Findings reveal the nine major factors influencing South African airlines’ growth in the 4IR era. This includes investment in ergonomics applications and research, governance is driven by 4IR, collaboration and incorporation of 4IR concepts, partnership with drone technology and high precision and efficiency with 4IR. Others are reskilling and upskilling, investment in 4IR software, policies to promote 4IR usage in the industry and policies to reduce human interface. Originality/value Understanding the relative significance of 4IR technologies’ role in airlines’ growth can assist critical stakeholders in promoting innovative policies and regulations tailored towards digitalised aerospace. Thus, the study contributes to strategies to improve digital innovation, airline growth and safety as components of the air travel demands in South Africa.
{"title":"An assessment of South African airlines’ growth in the era of Fourth Industrial Revolution technologies: the unexplored dimension","authors":"C. Aigbavboa, Andrew Ebekozien, N. Mkhize","doi":"10.1108/jfm-07-2022-0076","DOIUrl":"https://doi.org/10.1108/jfm-07-2022-0076","url":null,"abstract":"\u0000Purpose\u0000Aerospace is a demanding technological and industrial sector. Several regulations and policies via innovative digital transformation have been integrated to impact production systems and supply chains, including safety measures. Studies demonstrated that the Fourth Industrial Revolution (4IR) technologies could enhance productivity growth and safety measures. The 4IR role in influencing airlines’ growth is yet to receive in-depth studies in South Africa. Thus, this study aims to investigate the role of 4IR technologies in influencing airlines’ growth in South Africa.\u0000\u0000\u0000Design/methodology/approach\u0000This research used a qualitative research method. Primary data were compiled via 56 face-to-face semi-structured interviews with major stakeholders. The study achieved saturation. A thematic method was used to analyse the collected data.\u0000\u0000\u0000Findings\u0000Findings reveal the nine major factors influencing South African airlines’ growth in the 4IR era. This includes investment in ergonomics applications and research, governance is driven by 4IR, collaboration and incorporation of 4IR concepts, partnership with drone technology and high precision and efficiency with 4IR. Others are reskilling and upskilling, investment in 4IR software, policies to promote 4IR usage in the industry and policies to reduce human interface.\u0000\u0000\u0000Originality/value\u0000Understanding the relative significance of 4IR technologies’ role in airlines’ growth can assist critical stakeholders in promoting innovative policies and regulations tailored towards digitalised aerospace. Thus, the study contributes to strategies to improve digital innovation, airline growth and safety as components of the air travel demands in South Africa.\u0000","PeriodicalId":46544,"journal":{"name":"Journal of Facilities Management","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2023-03-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48426907","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-03-22DOI: 10.1108/jfm-10-2021-0124
Nor Zaimah Che-Ghani, Nik Elyna Myeda, A. Ali
Purpose To achieve efficient operation and maintenance (O&M) management, this study seeks to identify critical success factors (CSFs) affecting service delivery factors of O&M services at stratified residential buildings. The purpose of this study is to yield measurable data for developing an effective O&M framework to enhancing its performance. In future research, this study will further investigate the relationship between the CSF and service performance factors. Design/methodology/approach This study adopts a combination of qualitative and quantitative techniques that yields conclusive study findings while improving the research’s validity and dependability. Two series of instruments were conducted in an effort to refine the efficient O&M framework variables. Instruments used in addressing the research gap were a questionnaire survey and focus group discussion (FGD). Analysis of data was completed via the Statistical Package for the Social Sciences (SPSS) programme for quantitative data and thematic analysis for qualitative data. Findings This study concludes that the CSFs directly affect the performance of O&M. Questionnaire survey and FGD findings have refined the CSF into three main categories, namely, building characteristics, O&M management and community participation. FGD experts further suggested that service performance factors can be measured against SERVQUAL service qualities such as reliability, tangible, responsiveness, assurance and empathy. Research limitations/implications Future research may consider the inclusion of financial elements in the O&M service delivery. Originality/value This study presents a fresh insight into the CSFs that construct an efficient O&M framework through rigorous steps of data collection and analysis. This study proposes impactful guidance for policymakers, practitioners and residents on the significance of all parties’ involvement to support the management of residential buildings, where the current practice of O&M constantly faces complex issues. This study derives novice strategies that should correspond to the growing issues and challenges in managing residential buildings. The deeper insight into the role of O&M represents a direction for the future development of facilities management progress and stratified residential building sectors.
{"title":"Efficient operation and maintenance (O&M) framework in managing stratified residential properties","authors":"Nor Zaimah Che-Ghani, Nik Elyna Myeda, A. Ali","doi":"10.1108/jfm-10-2021-0124","DOIUrl":"https://doi.org/10.1108/jfm-10-2021-0124","url":null,"abstract":"Purpose To achieve efficient operation and maintenance (O&M) management, this study seeks to identify critical success factors (CSFs) affecting service delivery factors of O&M services at stratified residential buildings. The purpose of this study is to yield measurable data for developing an effective O&M framework to enhancing its performance. In future research, this study will further investigate the relationship between the CSF and service performance factors. Design/methodology/approach This study adopts a combination of qualitative and quantitative techniques that yields conclusive study findings while improving the research’s validity and dependability. Two series of instruments were conducted in an effort to refine the efficient O&M framework variables. Instruments used in addressing the research gap were a questionnaire survey and focus group discussion (FGD). Analysis of data was completed via the Statistical Package for the Social Sciences (SPSS) programme for quantitative data and thematic analysis for qualitative data. Findings This study concludes that the CSFs directly affect the performance of O&M. Questionnaire survey and FGD findings have refined the CSF into three main categories, namely, building characteristics, O&M management and community participation. FGD experts further suggested that service performance factors can be measured against SERVQUAL service qualities such as reliability, tangible, responsiveness, assurance and empathy. Research limitations/implications Future research may consider the inclusion of financial elements in the O&M service delivery. Originality/value This study presents a fresh insight into the CSFs that construct an efficient O&M framework through rigorous steps of data collection and analysis. This study proposes impactful guidance for policymakers, practitioners and residents on the significance of all parties’ involvement to support the management of residential buildings, where the current practice of O&M constantly faces complex issues. This study derives novice strategies that should correspond to the growing issues and challenges in managing residential buildings. The deeper insight into the role of O&M represents a direction for the future development of facilities management progress and stratified residential building sectors.","PeriodicalId":46544,"journal":{"name":"Journal of Facilities Management","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2023-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43068417","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-03-07DOI: 10.1108/jfm-06-2022-0067
Anke Aarninkhof-Kamphuis, H. Voordijk, G. Dewulf
Purpose Health care organizations’ decision-making for the future relies on anticipating changes. Reliable predictions are becoming increasingly difficult, creating anxiety and requires long-term adaptive planning to cope with unforeseen circumstances. The purpose of this study is to gain insights into the awareness of uncertainties that decision makers in healthcare have, particularly when making long-term investments. Design/methodology/approach This is a qualitative study with an explorative purpose. The data were collected through semi-structured and open interviews with board members of long-term care organizations. Findings The study revealed that respondents are most uncertain about the future financing of their real estate system. Another concern revealed is about the shortage of care professionals combined with an increasing demand for future care. Despite most decision makers do recognize uncertainties during the decision-making process, decision makers hardly address the level of these uncertainties. Although this study did find that some decision makers are aware of deep uncertainties, in terms of “unknown unknowns,” they have no actual approaches for dealing with such situations. Originality/value Decision makers at healthcare organizations are uncertain as to their ability to anticipate technological, economic, social and political developments, as well as predict future healthcare system transformations. Some decision makers are aware of deep uncertainties, in terms of “unknown unknowns” and “unidentified unknowns,” but they lack an actual approach to deal with such situations. This study examines how strategies adapt to unforeseen developments or how to deal with deep uncertainties in healthcare as complex adaptive system.
{"title":"Coping with uncertainties: challenges for decision makers in healthcare","authors":"Anke Aarninkhof-Kamphuis, H. Voordijk, G. Dewulf","doi":"10.1108/jfm-06-2022-0067","DOIUrl":"https://doi.org/10.1108/jfm-06-2022-0067","url":null,"abstract":"\u0000Purpose\u0000Health care organizations’ decision-making for the future relies on anticipating changes. Reliable predictions are becoming increasingly difficult, creating anxiety and requires long-term adaptive planning to cope with unforeseen circumstances. The purpose of this study is to gain insights into the awareness of uncertainties that decision makers in healthcare have, particularly when making long-term investments.\u0000\u0000\u0000Design/methodology/approach\u0000This is a qualitative study with an explorative purpose. The data were collected through semi-structured and open interviews with board members of long-term care organizations.\u0000\u0000\u0000Findings\u0000The study revealed that respondents are most uncertain about the future financing of their real estate system. Another concern revealed is about the shortage of care professionals combined with an increasing demand for future care. Despite most decision makers do recognize uncertainties during the decision-making process, decision makers hardly address the level of these uncertainties. Although this study did find that some decision makers are aware of deep uncertainties, in terms of “unknown unknowns,” they have no actual approaches for dealing with such situations.\u0000\u0000\u0000Originality/value\u0000Decision makers at healthcare organizations are uncertain as to their ability to anticipate technological, economic, social and political developments, as well as predict future healthcare system transformations. Some decision makers are aware of deep uncertainties, in terms of “unknown unknowns” and “unidentified unknowns,” but they lack an actual approach to deal with such situations. This study examines how strategies adapt to unforeseen developments or how to deal with deep uncertainties in healthcare as complex adaptive system.\u0000","PeriodicalId":46544,"journal":{"name":"Journal of Facilities Management","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2023-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46462730","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-03-02DOI: 10.1108/jfm-11-2022-0120
Andrew Ebekozien, C. Aigbavboa, M. S. Samsurijan, R. B. Radin Firdaus, Mohd Isa Rohayati
Purpose Public higher education institutions (HEIs) infrastructure funding is challenging in many developing countries. Encouraging private investment in HEIs infrastructure via a developed expanded corporate social responsibility (ECSR) may improve physical facilities. ECSR is a form of infrastructure tax relief providing physical facilities for HEIs. Academic literature is scarce concerning how ECSR can improve Nigeria’s public HEIs infrastructure and achieve education infrastructure related to Sustainable Development Goal 4 (SDG 4). Therefore, this study aims to proffer measures to improve public HEIs infrastructure and achieve sustainable development connected to Goal 4 focussing on infrastructure via a developed framework. Design/methodology/approach This is an expansion of an ongoing study, and data were collated via virtual interviews across the six geo-political zones in Nigeria. The analysed data were presented in a thematic pattern. Findings A total of 18 measures (sub-variables) emerged and were re-grouped into six variables. This includes institutionalising ECSR, HEIs infrastructure via ECSR awareness, HEIs infrastructure incentives, national and state action plans on HEIs infrastructure, a legal framework for HEIs infrastructure and key stakeholders’ participation. Also, the study used the generated six main variables to develop the improved public HEIs infrastructure via ECSR in developing countries, using Nigeria as a case study. This can enhance achieving infrastructure associated with SDG 4 (quality education) and targets. Originality/value This study intends to develop the philosophy (ECSR) with an implementable framework to encourage the private sector further to expand their CSR in the infrastructure development to the educational sector, especially in developing countries higher institutions, using Nigeria as a case study.
{"title":"Expanded corporate social responsibility framework: companies’ role in improving higher education institutions infrastructure to Sustainable Development Goal 4","authors":"Andrew Ebekozien, C. Aigbavboa, M. S. Samsurijan, R. B. Radin Firdaus, Mohd Isa Rohayati","doi":"10.1108/jfm-11-2022-0120","DOIUrl":"https://doi.org/10.1108/jfm-11-2022-0120","url":null,"abstract":"\u0000Purpose\u0000Public higher education institutions (HEIs) infrastructure funding is challenging in many developing countries. Encouraging private investment in HEIs infrastructure via a developed expanded corporate social responsibility (ECSR) may improve physical facilities. ECSR is a form of infrastructure tax relief providing physical facilities for HEIs. Academic literature is scarce concerning how ECSR can improve Nigeria’s public HEIs infrastructure and achieve education infrastructure related to Sustainable Development Goal 4 (SDG 4). Therefore, this study aims to proffer measures to improve public HEIs infrastructure and achieve sustainable development connected to Goal 4 focussing on infrastructure via a developed framework.\u0000\u0000\u0000Design/methodology/approach\u0000This is an expansion of an ongoing study, and data were collated via virtual interviews across the six geo-political zones in Nigeria. The analysed data were presented in a thematic pattern.\u0000\u0000\u0000Findings\u0000A total of 18 measures (sub-variables) emerged and were re-grouped into six variables. This includes institutionalising ECSR, HEIs infrastructure via ECSR awareness, HEIs infrastructure incentives, national and state action plans on HEIs infrastructure, a legal framework for HEIs infrastructure and key stakeholders’ participation. Also, the study used the generated six main variables to develop the improved public HEIs infrastructure via ECSR in developing countries, using Nigeria as a case study. This can enhance achieving infrastructure associated with SDG 4 (quality education) and targets.\u0000\u0000\u0000Originality/value\u0000This study intends to develop the philosophy (ECSR) with an implementable framework to encourage the private sector further to expand their CSR in the infrastructure development to the educational sector, especially in developing countries higher institutions, using Nigeria as a case study.\u0000","PeriodicalId":46544,"journal":{"name":"Journal of Facilities Management","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2023-03-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48007080","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-01-17DOI: 10.1108/jfm-07-2022-0077
Ahmed Mohammed Jasim Shuwaili, R. Hesarzadeh, Mohammad Ali Bagherpour Velashani
Purpose In recent decades, managerial desire to use internal audit services to promote well-controlled organizational processes has significantly increased in the public sector. Yet, there is rare information on how internal audits may effectively be implemented in the public sector. The present research aims to design a comprehensive internal audit effectiveness model for the public sector. Design/methodology/approach This research is an applied mixed-methods (qualitative–quantitative) and descriptive survey study. The research population in both qualitative and quantitative sections included all internal and external audit managers and staff of Iraqi public organizations. The study sample of the qualitative section included 28 audit managers and staff selected using purposive sampling, and the study sample of the quantitative section included 399 individuals selected using convenience sampling. The data collection instruments in the qualitative and quantitative sections included semi-structured interviews and questionnaires, respectively. Data analysis was carried out using thematic analysis in Atlas.ti software in the qualitative section. Quantitative analysis and model validation were also performed using path analysis and structural equation modeling in Smart-PLS software in the quantitative section. Findings The results of the qualitative section led to the identification of 38 effectiveness factors among seven main categories, which were finally presented in the form of a comprehensive model. The main categories included the communication between internal and external auditors, granting independence and authority to internal auditors, providing specialized human resources, providing technological resources, developing management support, strengthening organizational culture and developing audit plans. In the qualitative section, the model was validated and confirmed. Quantitative results further showed that the compilation of audit plans and the development of management support were the most important factors. Originality/value The present study contributes to the literature by providing a comprehensive framework on internal audit with an emphasis on resource-based theory and reducing the research gap in the field of agents influencing internal audit efficacy in the public sector of developing countries. Further, the study provides insights into an under-studied developing country, Iraq.
{"title":"Designing an internal audit effectiveness model for public sector: qualitative and quantitative evidence from a developing country","authors":"Ahmed Mohammed Jasim Shuwaili, R. Hesarzadeh, Mohammad Ali Bagherpour Velashani","doi":"10.1108/jfm-07-2022-0077","DOIUrl":"https://doi.org/10.1108/jfm-07-2022-0077","url":null,"abstract":"\u0000Purpose\u0000In recent decades, managerial desire to use internal audit services to promote well-controlled organizational processes has significantly increased in the public sector. Yet, there is rare information on how internal audits may effectively be implemented in the public sector. The present research aims to design a comprehensive internal audit effectiveness model for the public sector.\u0000\u0000\u0000Design/methodology/approach\u0000This research is an applied mixed-methods (qualitative–quantitative) and descriptive survey study. The research population in both qualitative and quantitative sections included all internal and external audit managers and staff of Iraqi public organizations. The study sample of the qualitative section included 28 audit managers and staff selected using purposive sampling, and the study sample of the quantitative section included 399 individuals selected using convenience sampling. The data collection instruments in the qualitative and quantitative sections included semi-structured interviews and questionnaires, respectively. Data analysis was carried out using thematic analysis in Atlas.ti software in the qualitative section. Quantitative analysis and model validation were also performed using path analysis and structural equation modeling in Smart-PLS software in the quantitative section.\u0000\u0000\u0000Findings\u0000The results of the qualitative section led to the identification of 38 effectiveness factors among seven main categories, which were finally presented in the form of a comprehensive model. The main categories included the communication between internal and external auditors, granting independence and authority to internal auditors, providing specialized human resources, providing technological resources, developing management support, strengthening organizational culture and developing audit plans. In the qualitative section, the model was validated and confirmed. Quantitative results further showed that the compilation of audit plans and the development of management support were the most important factors.\u0000\u0000\u0000Originality/value\u0000The present study contributes to the literature by providing a comprehensive framework on internal audit with an emphasis on resource-based theory and reducing the research gap in the field of agents influencing internal audit efficacy in the public sector of developing countries. Further, the study provides insights into an under-studied developing country, Iraq.\u0000","PeriodicalId":46544,"journal":{"name":"Journal of Facilities Management","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2023-01-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45541930","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：