In a Multiple-Input Multiple-Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) method, multiple antennas can be used on either the transmitter or receiver end to improve the system capacity, data throughput, and robustness. OFDM has been used as the modulation system that divides the data stream into multiple parallel low-rate subcarriers. MIMO enhances the system by utilizing spatial diversity and multiplexing abilities. Modulation classification in the MIMO-OFDM systems describes the process of recognizing the modulation scheme used by the communicated signals in a MIMO-OFDM communication system. This is a vital step in receiver design as it enables proper demodulation of the received signals. In this paper, an Enhanced Modulation Classification Approach using an Arithmetic Optimization Algorithm with Deep Learning (EMCA-AOADL) is developed for MIMO-OFDM systems. The goal of the presented EMCAAOADL technique is to detect and classify different types of modulation signals that exist in MIMO-OFDM systems. To accomplish this, the EMCA-AOADL technique performs a feature extraction process based on the Sevcik Fractal Dimension (SFD). For modulation classification, the EMCA-AOADL technique uses a Convolution Neural Network with Long Short-Term Memory (CNN-LSTM) approach. Finally, the hyperparameter values of the CNN-LSTM algorithm can be chosen by using AOA. To highlight the better recognition result of the EMCA-AOADL approach, a comprehensive range of simulations was performed. The simulation values illustrate the better results of the EMCA-AOADL algorithm.
{"title":"Modeling an Enhanced Modulation Classification Approach using Arithmetic Optimization with Deep Learning for MIMO-OFDM Systems","authors":"M Venkatramanan, M Chinnadurai","doi":"10.2478/msr-2024-0007","DOIUrl":"https://doi.org/10.2478/msr-2024-0007","url":null,"abstract":"In a Multiple-Input Multiple-Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) method, multiple antennas can be used on either the transmitter or receiver end to improve the system capacity, data throughput, and robustness. OFDM has been used as the modulation system that divides the data stream into multiple parallel low-rate subcarriers. MIMO enhances the system by utilizing spatial diversity and multiplexing abilities. Modulation classification in the MIMO-OFDM systems describes the process of recognizing the modulation scheme used by the communicated signals in a MIMO-OFDM communication system. This is a vital step in receiver design as it enables proper demodulation of the received signals. In this paper, an Enhanced Modulation Classification Approach using an Arithmetic Optimization Algorithm with Deep Learning (EMCA-AOADL) is developed for MIMO-OFDM systems. The goal of the presented EMCAAOADL technique is to detect and classify different types of modulation signals that exist in MIMO-OFDM systems. To accomplish this, the EMCA-AOADL technique performs a feature extraction process based on the Sevcik Fractal Dimension (SFD). For modulation classification, the EMCA-AOADL technique uses a Convolution Neural Network with Long Short-Term Memory (CNN-LSTM) approach. Finally, the hyperparameter values of the CNN-LSTM algorithm can be chosen by using AOA. To highlight the better recognition result of the EMCA-AOADL approach, a comprehensive range of simulations was performed. The simulation values illustrate the better results of the EMCA-AOADL algorithm.","PeriodicalId":49848,"journal":{"name":"Measurement Science Review","volume":"43 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2024-04-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140563974","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Emotion recognition systems from speech signals are realized with the help of acoustic or spectral features. Acoustic analysis is the extraction of digital features from speech files using digital signal processing methods. Another method is the analysis of time-frequency images of speech using image processing. The size of the features obtained by acoustic analysis is in the thousands. Therefore, classification complexity increases and causes variation in classification accuracy. In feature selection, features unrelated to emotions are extracted from the feature space and are expected to contribute to the classifier performance. Traditional feature selection methods are mostly based on statistical analysis. Another feature selection method is the use of metaheuristic algorithms to detect and remove irrelevant features from the feature set. In this study, we compare the performance of metaheuristic feature selection algorithms for speech emotion recognition. For this purpose, a comparative analysis was performed on four different datasets, eight metaheuristics and three different classifiers. The results of the analysis show that the classification accuracy increases when the feature size is reduced. For all datasets, the highest accuracy was achieved with the support vector machine. The highest accuracy for the EMO-DB, EMOVA, eNTERFACE’05 and SAVEE datasets is 88.1%, 73.8%, 73.3% and 75.7%, respectively.
{"title":"Comparative Performance Analysis of Metaheuristic Feature Selection Methods for Speech Emotion Recognition","authors":"Turgut Ozseven, Mustafa Arpacioglu","doi":"10.2478/msr-2024-0010","DOIUrl":"https://doi.org/10.2478/msr-2024-0010","url":null,"abstract":"Emotion recognition systems from speech signals are realized with the help of acoustic or spectral features. Acoustic analysis is the extraction of digital features from speech files using digital signal processing methods. Another method is the analysis of time-frequency images of speech using image processing. The size of the features obtained by acoustic analysis is in the thousands. Therefore, classification complexity increases and causes variation in classification accuracy. In feature selection, features unrelated to emotions are extracted from the feature space and are expected to contribute to the classifier performance. Traditional feature selection methods are mostly based on statistical analysis. Another feature selection method is the use of metaheuristic algorithms to detect and remove irrelevant features from the feature set. In this study, we compare the performance of metaheuristic feature selection algorithms for speech emotion recognition. For this purpose, a comparative analysis was performed on four different datasets, eight metaheuristics and three different classifiers. The results of the analysis show that the classification accuracy increases when the feature size is reduced. For all datasets, the highest accuracy was achieved with the support vector machine. The highest accuracy for the EMO-DB, EMOVA, eNTERFACE’05 and SAVEE datasets is 88.1%, 73.8%, 73.3% and 75.7%, respectively.","PeriodicalId":49848,"journal":{"name":"Measurement Science Review","volume":"245 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2024-04-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140564043","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The brain’s Electroencephalogram (EEG) signals contain essential information about the brain and are widely used to support the analysis of epilepsy. By analyzing brain behavioral patterns, an accurate classification of different epileptic states can be made. The behavioral pattern analysis using EEG signals has become increasingly important in recent years. EEG signals are boisterous and non-linear, and it is a demanding mission to design accurate methods for classifying different epileptic states. In this work, a method called Quadrature Response Spectra-based Gaussian Kullback Deep Neural (QRS-GKDN) Behavioral Pattern Analytics for epileptic seizures is introduced. QRS-GKDN is divided into three processes. First, the EEG signals are preprocessed using the Quadrature Mirror Filter (QMF) and the Power Frequency Spectral (PFS) and Response Spectra (RS)-based Feature Extraction is applied for Behavioral Pattern Analytics. The QMF function is applied to the preprocessed EEG input signals. Then, relevant features for behavioral pattern analysis are extracted from the processed EEG signals using the PFS and RS function. Finally, Gaussian Kullback–Leibler Deep Neural Classification (GKDN) is implemented for epileptic seizure identification. Furthermore, the proposed method is analyzed and compared with dissimilar samples. The results of the Proposed method have superior prediction in a computationally efficient manner for identifying epileptic seizure based on the analyzed behavioral patterns with less error and validation time.
{"title":"Quadrature Response Spectra Deep Neural Based Behavioral Pattern Analytics for Epileptic Seizure Identification","authors":"R Vishalakshi, S Mangai, C Sharmila, S Kamalraj","doi":"10.2478/msr-2024-0009","DOIUrl":"https://doi.org/10.2478/msr-2024-0009","url":null,"abstract":"The brain’s Electroencephalogram (EEG) signals contain essential information about the brain and are widely used to support the analysis of epilepsy. By analyzing brain behavioral patterns, an accurate classification of different epileptic states can be made. The behavioral pattern analysis using EEG signals has become increasingly important in recent years. EEG signals are boisterous and non-linear, and it is a demanding mission to design accurate methods for classifying different epileptic states. In this work, a method called Quadrature Response Spectra-based Gaussian Kullback Deep Neural (QRS-GKDN) Behavioral Pattern Analytics for epileptic seizures is introduced. QRS-GKDN is divided into three processes. First, the EEG signals are preprocessed using the Quadrature Mirror Filter (QMF) and the Power Frequency Spectral (PFS) and Response Spectra (RS)-based Feature Extraction is applied for Behavioral Pattern Analytics. The QMF function is applied to the preprocessed EEG input signals. Then, relevant features for behavioral pattern analysis are extracted from the processed EEG signals using the PFS and RS function. Finally, Gaussian Kullback–Leibler Deep Neural Classification (GKDN) is implemented for epileptic seizure identification. Furthermore, the proposed method is analyzed and compared with dissimilar samples. The results of the Proposed method have superior prediction in a computationally efficient manner for identifying epileptic seizure based on the analyzed behavioral patterns with less error and validation time.","PeriodicalId":49848,"journal":{"name":"Measurement Science Review","volume":"244 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2024-04-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140563601","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Lei Li, Ming Wang, Dahai Wang, Xuewei Gao, Qianhui Zhu
Based on the well logging requirements of horizontal stripper wells, the flow characteristics of the oil-water two-phase flow in the invisible horizontal tri-electrode capacitive sensor (HTCS) measurement pipeline are studied. First, an experimental device and a numerical validation model of a horizontal 20 mm glass pipeline are established to study the flow characteristics of the oil-water two-phase flow. Then, the flow characteristics of the horizontal oil-water two-phase flow in the measurement pipeline under different horizontal inclination angles are studied and the flow patterns and inclination angles suitable for the new tri-electrode capacitive sensor are discussed. Finally, using the horizontal oil-water two-phase flow loop platform of the largest oil and gas testing center in China, the dynamic response of the new capacitive sensor is studied under different inclination angles, flow rates, and water-cut conditions, and the dynamic response law is analyzed based on the simulation results.
{"title":"Study on Oil-Water Two-phase Flow in the Invisible Measuring Pipeline of the Horizontal Tri-electrode Capacitive Sensor","authors":"Lei Li, Ming Wang, Dahai Wang, Xuewei Gao, Qianhui Zhu","doi":"10.2478/msr-2024-0008","DOIUrl":"https://doi.org/10.2478/msr-2024-0008","url":null,"abstract":"Based on the well logging requirements of horizontal stripper wells, the flow characteristics of the oil-water two-phase flow in the invisible horizontal tri-electrode capacitive sensor (HTCS) measurement pipeline are studied. First, an experimental device and a numerical validation model of a horizontal 20 mm glass pipeline are established to study the flow characteristics of the oil-water two-phase flow. Then, the flow characteristics of the horizontal oil-water two-phase flow in the measurement pipeline under different horizontal inclination angles are studied and the flow patterns and inclination angles suitable for the new tri-electrode capacitive sensor are discussed. Finally, using the horizontal oil-water two-phase flow loop platform of the largest oil and gas testing center in China, the dynamic response of the new capacitive sensor is studied under different inclination angles, flow rates, and water-cut conditions, and the dynamic response law is analyzed based on the simulation results.","PeriodicalId":49848,"journal":{"name":"Measurement Science Review","volume":"189 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2024-04-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140563866","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
K. Priyadarshini, Alanoud Al Mazroa, Mohammad Alamgeer, V. Subashree
Millions of people worldwide suffer from diabetes, a medical condition that is spreading at an accelerating pace. Numerous studies show that risk factors that may arise from diabetes can be avoided if the disease is detected early. The health-care monitoring system has benefited greatly from early diabetes prediction made possible by the integration of Deep Learning (DL) and Machine Learning (ML) algorithms. The objective of many early studies was to increase the prediction model accuracy. However, DL algorithms often cannot fully exploit the potential of the available datasets because they are too small. This study includes a very accurate DL model as well as a novel system that integrates cloud services and allows users to directly enhance an existing data set, which can increase the accuracy of DL techniques. Therefore, the Long Short-Term Memory (LSTM) model with controller is chosen for efficient type-1 diabetes prediction. Experimental validation of the proposed Nonlinear Model Predictive Control (NMPC)_LSTM algorithm method is compared with other conventional DL algorithms. The proposed controller method achieves excellent blood glucose set point tracking and the proposed algorithms achieves 98.95% accuracy for the obtained data. It outperforms other existing methods with an increase in percentage accuracy compared to the Benchmark Pima Indian Diabetes Datasets (PIDD).
{"title":"A Cloud-Connected Digital System for Type-1 Diabetes Prediction using Time Series LSTM Model","authors":"K. Priyadarshini, Alanoud Al Mazroa, Mohammad Alamgeer, V. Subashree","doi":"10.2478/msr-2024-0011","DOIUrl":"https://doi.org/10.2478/msr-2024-0011","url":null,"abstract":"Millions of people worldwide suffer from diabetes, a medical condition that is spreading at an accelerating pace. Numerous studies show that risk factors that may arise from diabetes can be avoided if the disease is detected early. The health-care monitoring system has benefited greatly from early diabetes prediction made possible by the integration of Deep Learning (DL) and Machine Learning (ML) algorithms. The objective of many early studies was to increase the prediction model accuracy. However, DL algorithms often cannot fully exploit the potential of the available datasets because they are too small. This study includes a very accurate DL model as well as a novel system that integrates cloud services and allows users to directly enhance an existing data set, which can increase the accuracy of DL techniques. Therefore, the Long Short-Term Memory (LSTM) model with controller is chosen for efficient type-1 diabetes prediction. Experimental validation of the proposed Nonlinear Model Predictive Control (NMPC)_LSTM algorithm method is compared with other conventional DL algorithms. The proposed controller method achieves excellent blood glucose set point tracking and the proposed algorithms achieves 98.95% accuracy for the obtained data. It outperforms other existing methods with an increase in percentage accuracy compared to the Benchmark Pima Indian Diabetes Datasets (PIDD).","PeriodicalId":49848,"journal":{"name":"Measurement Science Review","volume":"312 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2024-04-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140563630","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A 1-dimensional (1D) and 2-dimensional (2D) biomedical signal analysis based on the Discrete Cosine Transform (DCT) feature extraction method was performed to diagnose epilepsy disorders with high accuracy. For this purpose, Electroencephalogram (EEG) data were used for 1D signal analysis and Magnetic Resonance Imaging (MRI) data were used for 2D signal analysis. The feature vectors were obtained by applying 1D DCT together with statistical methods such as mean, variance, standard deviation, kurtosis, and skewness for EEG data and by applying 2D DCT together with the statistical method of mean for MRI data. The most useful features were selected by applying Principal Component Analysis (PCA), Linear Discriminant Analysis (LDA), Forward Selection and Backward Selection methods to the obtained feature vectors. Using EEG stand-alone features, MRI stand-alone features and EEG-MRI fused features, the classification of healthy and epileptic subjects was performed in the form of two clusters. The result of epilepsy classification in this work is 96% success of 1D EEG data by using the features selected by the PCA method, 94% success of 2D MRI data using the selected features by applying the Forward Method, 100% classification accuracy of 1D EEG and 2D MRI datasets by LDA method using the obtained fused features . The article shows that the fused features of EEG-MRI can be used very effectively for the diagnosis of epilepsy.
{"title":"A High-Performance Method Based on Features Fusion of EEG Brain Signal and MRI-Imaging Data for Epilepsy Classification","authors":"Fatma Demirezen Yağmur, Ahmet Sertbaş","doi":"10.2478/msr-2024-0001","DOIUrl":"https://doi.org/10.2478/msr-2024-0001","url":null,"abstract":"A 1-dimensional (1D) and 2-dimensional (2D) biomedical signal analysis based on the Discrete Cosine Transform (DCT) feature extraction method was performed to diagnose epilepsy disorders with high accuracy. For this purpose, Electroencephalogram (EEG) data were used for 1D signal analysis and Magnetic Resonance Imaging (MRI) data were used for 2D signal analysis. The feature vectors were obtained by applying 1D DCT together with statistical methods such as mean, variance, standard deviation, kurtosis, and skewness for EEG data and by applying 2D DCT together with the statistical method of mean for MRI data. The most useful features were selected by applying Principal Component Analysis (PCA), Linear Discriminant Analysis (LDA), Forward Selection and Backward Selection methods to the obtained feature vectors. Using EEG stand-alone features, MRI stand-alone features and EEG-MRI fused features, the classification of healthy and epileptic subjects was performed in the form of two clusters. The result of epilepsy classification in this work is 96% success of 1D EEG data by using the features selected by the PCA method, 94% success of 2D MRI data using the selected features by applying the Forward Method, 100% classification accuracy of 1D EEG and 2D MRI datasets by LDA method using the obtained fused features . The article shows that the fused features of EEG-MRI can be used very effectively for the diagnosis of epilepsy.","PeriodicalId":49848,"journal":{"name":"Measurement Science Review","volume":"294 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2024-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140070193","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jaromír Křepelka, Petr Schovánek, Pavel Tuček, Miroslav Hrabovský, František Jáně
This article is devoted to the positioning of glued parts by robots in the process of manufacturing automotive headlights, with the possibility of generalization to the mutual positioning of any 3D object. The authors focused on the description of the mathematical method that leads to the optimization of the robot arm setting and ensures the closest contact of the glued parts. The contact surfaces of the two joined parts are, in the ideal case, identical in shape and their optimal alignment is considered to best align the position of the nominal points on the base part with the position of the control (measured) points on the part manipulated by the robot.
{"title":"Optimization of Component Assembly in Automotive Industry","authors":"Jaromír Křepelka, Petr Schovánek, Pavel Tuček, Miroslav Hrabovský, František Jáně","doi":"10.2478/msr-2024-0005","DOIUrl":"https://doi.org/10.2478/msr-2024-0005","url":null,"abstract":"This article is devoted to the positioning of glued parts by robots in the process of manufacturing automotive headlights, with the possibility of generalization to the mutual positioning of any 3D object. The authors focused on the description of the mathematical method that leads to the optimization of the robot arm setting and ensures the closest contact of the glued parts. The contact surfaces of the two joined parts are, in the ideal case, identical in shape and their optimal alignment is considered to best align the position of the nominal points on the base part with the position of the control (measured) points on the part manipulated by the robot.","PeriodicalId":49848,"journal":{"name":"Measurement Science Review","volume":"44 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2024-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140070427","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The use of the thermostatic metal bath is becoming more and more extensive and the requirements for its precision and reliability are also increasing. To meet the needs of the metal bath calibration, a 12-channel thermostatic metal bath temperature field calibration system based on a four-wire PT100 has been designed. The system design includes a front-end temperature measurement component, which consists of a four-wire PT100 and a thermostatic block, and a signal processing component, which consists of a bidirectional constant current source excitation unit, a signal conditioning unit and a high-precision acquisition unit. The STM32f407 is used as the main control chip, and the analog channel selector is used for 12-channel selection. The constant current source is used for signal excitation, the proportional method is used to measure the PT100 resistance, and an acquisition circuit with a high-precision 32-bit ADS1263 analog-to-digital converter is used to amplify, filter and convert the analog signal. After piecewise linear fitting and system calibration, the temperature measurement accuracy can reach 0.4 mK, which meets the calibration requirements of the thermostatic metal bath.
{"title":"Design of Calibration System for Multi-Channel Thermostatic Metal Bath","authors":"Hua Zhuo, Yan Xu, Weihu Zhou, Feng Li, Yikun Zhao","doi":"10.2478/msr-2024-0004","DOIUrl":"https://doi.org/10.2478/msr-2024-0004","url":null,"abstract":"The use of the thermostatic metal bath is becoming more and more extensive and the requirements for its precision and reliability are also increasing. To meet the needs of the metal bath calibration, a 12-channel thermostatic metal bath temperature field calibration system based on a four-wire PT100 has been designed. The system design includes a front-end temperature measurement component, which consists of a four-wire PT100 and a thermostatic block, and a signal processing component, which consists of a bidirectional constant current source excitation unit, a signal conditioning unit and a high-precision acquisition unit. The STM32f407 is used as the main control chip, and the analog channel selector is used for 12-channel selection. The constant current source is used for signal excitation, the proportional method is used to measure the PT100 resistance, and an acquisition circuit with a high-precision 32-bit ADS1263 analog-to-digital converter is used to amplify, filter and convert the analog signal. After piecewise linear fitting and system calibration, the temperature measurement accuracy can reach 0.4 mK, which meets the calibration requirements of the thermostatic metal bath.","PeriodicalId":49848,"journal":{"name":"Measurement Science Review","volume":"35 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2024-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140070287","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Richard Ravasz, Miroslav Potočný, Daniel Arbet, Martin Kováč, David Maljar, Lukáš Nagy, Viera Stopjaková
This article presents measurement circuits and a test board developed for the experimental evaluation of prototype chip samples of the Fully Differential Difference Amplifier (FDDA). The Device Under Test (DUT) is an ultra low-voltage, high performance integrated FDDA designed and fabricated in 130nm CMOS technology. The power supply voltage of the FDDA is 400mV. The measurement circuits were implemented on the test board with the fabricated FDDA chip to evaluate its main parameters and properties. In this work, we focus on evaluation of the following parameters: the input offset voltage, the common-mode rejection ratio, and the power supply rejection ratio. The test board was developed and verified. The test board error was measured to be 38.73mV. The offset voltage of the FDDA was −0.66mV. The measured FDDA gain and gain bandwidth were 48dB and 550kHz, respectively. In addition to the measurement board, a graphical user interface was also developed to simplify the control of the device under test during measurements.
{"title":"Measurement Approach to Evaluation of Ultra-Low-Voltage Amplifier ASICs","authors":"Richard Ravasz, Miroslav Potočný, Daniel Arbet, Martin Kováč, David Maljar, Lukáš Nagy, Viera Stopjaková","doi":"10.2478/msr-2024-0002","DOIUrl":"https://doi.org/10.2478/msr-2024-0002","url":null,"abstract":"This article presents measurement circuits and a test board developed for the experimental evaluation of prototype chip samples of the Fully Differential Difference Amplifier (FDDA). The Device Under Test (DUT) is an ultra low-voltage, high performance integrated FDDA designed and fabricated in 130nm CMOS technology. The power supply voltage of the FDDA is 400mV. The measurement circuits were implemented on the test board with the fabricated FDDA chip to evaluate its main parameters and properties. In this work, we focus on evaluation of the following parameters: the input offset voltage, the common-mode rejection ratio, and the power supply rejection ratio. The test board was developed and verified. The test board error was measured to be 38.73mV. The offset voltage of the FDDA was −0.66mV. The measured FDDA gain and gain bandwidth were 48dB and 550kHz, respectively. In addition to the measurement board, a graphical user interface was also developed to simplify the control of the device under test during measurements.","PeriodicalId":49848,"journal":{"name":"Measurement Science Review","volume":"55 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2024-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140070284","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A steady-state sinusoidal and distortion-free excitation source is very important for the accuracy and consistency of the calibration parameters of micro-electro-mechanical systems (MEMS) inertial sensors. To solve the problem that the current MEMS inertial measurement unit (IMU) calibration device is unable to reproduce the spatial motion of linear and angular vibration coupling, research topics on the coupling vibration characteristics and parameter identification for an electromagnetic linear-angular vibration exciter are proposed. This research paper used Ampere’s law and Lorentz force to establish the analytical expressions for the electromagnetic force and electromagnetic torque of the electromagnetic linear-angular vibration exciter. Then, the main purpose of this paper is to establish uniaxial and coupled vibration electromechanical analogy models containing mechanical parameters based on the admittance-type electromechanical analogy principle, and the parameter identification model is also obtained by combining the impedance formula with the additional mass method. Finally, the validity of the coupling vibration characteristics and the parameter identification model are verified by the frequency response simulation and the additional mass method, and the relative error of each parameter identification is within 5% in this paper.
{"title":"Analysis of Coupled Vibration Characteristics of Linear-Angular and Parameter Identification","authors":"Bo Tang, Jiangen Yang, Wei Chen, Xu Ming","doi":"10.2478/msr-2024-0003","DOIUrl":"https://doi.org/10.2478/msr-2024-0003","url":null,"abstract":"A steady-state sinusoidal and distortion-free excitation source is very important for the accuracy and consistency of the calibration parameters of micro-electro-mechanical systems (MEMS) inertial sensors. To solve the problem that the current MEMS inertial measurement unit (IMU) calibration device is unable to reproduce the spatial motion of linear and angular vibration coupling, research topics on the coupling vibration characteristics and parameter identification for an electromagnetic linear-angular vibration exciter are proposed. This research paper used Ampere’s law and Lorentz force to establish the analytical expressions for the electromagnetic force and electromagnetic torque of the electromagnetic linear-angular vibration exciter. Then, the main purpose of this paper is to establish uniaxial and coupled vibration electromechanical analogy models containing mechanical parameters based on the admittance-type electromechanical analogy principle, and the parameter identification model is also obtained by combining the impedance formula with the additional mass method. Finally, the validity of the coupling vibration characteristics and the parameter identification model are verified by the frequency response simulation and the additional mass method, and the relative error of each parameter identification is within 5% in this paper.","PeriodicalId":49848,"journal":{"name":"Measurement Science Review","volume":"34 1","pages":""},"PeriodicalIF":0.9,"publicationDate":"2024-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140070280","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：