The osteotome was a hand-cranked medical chainsaw designed in 1830 by the German surgeon Bernhard Heine. Before Heine, surgeons used crude, manual tools, such as hammers, chisels, and handsaws. The osteotome was among the first mechanical tools used in orthopedic surgery, and it preceded the later use of the motorized chainsaw for woodcutting. Due to the small number of units manufactured, questions remain about the osteotome’s usage. To facilitate conservation and assist with investigation, Heine’s osteotome was digitally reconstructed. As with other digital reconstruction attempts in cultural heritage, assumptions were made to facilitate reproduction. To highlight the functional similarities and contrasts between early and contemporary tools, its parts were compared with contemporary chainsaws and surgical tools. Contemporary orthopedic surgeons have largely shifted away from medical chainsaws, such as the osteotome, in favor of reciprocating saws. Due to its small size and medical purpose, the osteotome was designed for greater precision than a modern industrial chainsaw. Based on the reproduction and comparative analysis, the device was likely used in a manner more similar to modern medical reciprocating saws than to its direct descendant, the industrial chainsaw. The Heine osteotome mechanized surgery and its descendants are still used in medicine and the industry. The osteotome model enabled an analysis of its function and use.
{"title":"Virtually Reconstructing Bernhard Heine’s Osteotome","authors":"John Larocco, Eric Zachariah","doi":"10.3390/heritage7070178","DOIUrl":"https://doi.org/10.3390/heritage7070178","url":null,"abstract":"The osteotome was a hand-cranked medical chainsaw designed in 1830 by the German surgeon Bernhard Heine. Before Heine, surgeons used crude, manual tools, such as hammers, chisels, and handsaws. The osteotome was among the first mechanical tools used in orthopedic surgery, and it preceded the later use of the motorized chainsaw for woodcutting. Due to the small number of units manufactured, questions remain about the osteotome’s usage. To facilitate conservation and assist with investigation, Heine’s osteotome was digitally reconstructed. As with other digital reconstruction attempts in cultural heritage, assumptions were made to facilitate reproduction. To highlight the functional similarities and contrasts between early and contemporary tools, its parts were compared with contemporary chainsaws and surgical tools. Contemporary orthopedic surgeons have largely shifted away from medical chainsaws, such as the osteotome, in favor of reciprocating saws. Due to its small size and medical purpose, the osteotome was designed for greater precision than a modern industrial chainsaw. Based on the reproduction and comparative analysis, the device was likely used in a manner more similar to modern medical reciprocating saws than to its direct descendant, the industrial chainsaw. The Heine osteotome mechanized surgery and its descendants are still used in medicine and the industry. The osteotome model enabled an analysis of its function and use.","PeriodicalId":507444,"journal":{"name":"Heritage","volume":"31 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141647893","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. D’Orazio, Margherita Canafoglia, G. Bernardini, E. Quagliarini
Digital technologies can support designers in balancing architectural heritage conservation and performances using multidisciplinary approaches. Fire safety represents a challenging issue, especially in public historical buildings hosting vulnerable occupants, since heavy modifications are often required to facilitate their evacuation. Digital tools based on evacuation simulation are able to verify the impact of other sustainable, compatible evacuation management and planning approaches, especially considering the use of generic software, which can be used by low-trained technicians according to rapid setups. Nevertheless, simulator reliability should be experimentally verified through case study applications. This work thus offers the experimental verification of a rapid setup-based generic evacuation simulator in the context of a significant case study (the “Omero Museum”, Ancona, Italy), placed in a historic building hosting vulnerable occupants (disabled, elderly, children), thanks to a full-scale evacuation drill. The rapid setup described different vulnerable occupants’ categories according to literature data. Comparisons between drill and simulation results, using consolidated verification indicators, showed the overall reliability of the proposed approach, and thus encourage additional tests in historical buildings. The proposed setup-based simulator could be combined with other digital tools (virtual reality, BIM-related) to provide full support to fire risk and evacuation assessments when vulnerable occupants are present.
{"title":"Towards Using Digital Technologies to Balance Conservation and Fire Mitigation in Building Heritage Hosting Vulnerable Occupants: Rapid Evacuation Simulator Verification for the “Omero Museum” (Ancona, Italy)","authors":"M. D’Orazio, Margherita Canafoglia, G. Bernardini, E. Quagliarini","doi":"10.3390/heritage7070177","DOIUrl":"https://doi.org/10.3390/heritage7070177","url":null,"abstract":"Digital technologies can support designers in balancing architectural heritage conservation and performances using multidisciplinary approaches. Fire safety represents a challenging issue, especially in public historical buildings hosting vulnerable occupants, since heavy modifications are often required to facilitate their evacuation. Digital tools based on evacuation simulation are able to verify the impact of other sustainable, compatible evacuation management and planning approaches, especially considering the use of generic software, which can be used by low-trained technicians according to rapid setups. Nevertheless, simulator reliability should be experimentally verified through case study applications. This work thus offers the experimental verification of a rapid setup-based generic evacuation simulator in the context of a significant case study (the “Omero Museum”, Ancona, Italy), placed in a historic building hosting vulnerable occupants (disabled, elderly, children), thanks to a full-scale evacuation drill. The rapid setup described different vulnerable occupants’ categories according to literature data. Comparisons between drill and simulation results, using consolidated verification indicators, showed the overall reliability of the proposed approach, and thus encourage additional tests in historical buildings. The proposed setup-based simulator could be combined with other digital tools (virtual reality, BIM-related) to provide full support to fire risk and evacuation assessments when vulnerable occupants are present.","PeriodicalId":507444,"journal":{"name":"Heritage","volume":"46 21","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141650448","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Mauricio Carvache-Franco, Wilmer Carvache-Franco, Miguel Orden-Mejía, Orly Carvache-Franco, Luis Andrade-Alcivar, Brigette Cedeño-Zavala
Religious tourism is one of the oldest forms of mobility for travel. This study aims at validating the motivational dimensions of demand in religious tourism. The present research was carried out with tourists who had attended the pilgrimage of the Virgin of Montserrat in the city of Montecristi (Ecuador), an important tourist destination that stands out for its culture and intangible heritage. This quantitative study had a sample of 298 valid questionnaires that were analyzed through exploratory and confirmatory factor analysis. The results identified five motivational dimensions: experience belief, experience religion, social exploration, escape, and shopping. The results will serve as a guide for private companies to develop products from religious tourism. Likewise, the research contributes significantly to the academic literature on religious tourism in emerging destinations.
{"title":"Motivations for the Demand for Religious Tourism: The Case of the Pilgrimage of the Virgin of Montserrat in Ecuador","authors":"Mauricio Carvache-Franco, Wilmer Carvache-Franco, Miguel Orden-Mejía, Orly Carvache-Franco, Luis Andrade-Alcivar, Brigette Cedeño-Zavala","doi":"10.3390/heritage7070176","DOIUrl":"https://doi.org/10.3390/heritage7070176","url":null,"abstract":"Religious tourism is one of the oldest forms of mobility for travel. This study aims at validating the motivational dimensions of demand in religious tourism. The present research was carried out with tourists who had attended the pilgrimage of the Virgin of Montserrat in the city of Montecristi (Ecuador), an important tourist destination that stands out for its culture and intangible heritage. This quantitative study had a sample of 298 valid questionnaires that were analyzed through exploratory and confirmatory factor analysis. The results identified five motivational dimensions: experience belief, experience religion, social exploration, escape, and shopping. The results will serve as a guide for private companies to develop products from religious tourism. Likewise, the research contributes significantly to the academic literature on religious tourism in emerging destinations.","PeriodicalId":507444,"journal":{"name":"Heritage","volume":"67 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141651595","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Gricelda Herrera-Franco, Fernando Morante-Carballo, Lady Bravo-Montero, Juan Valencia-Robles, Maribel Aguilar-Aguilar, Sergio Martos-Rosillo, P. Carrión-Mero
Water Sowing and Harvesting (WS&H) is an ancestral knowledge widely used as a sustainable technique in water management. This study aims to analyse the importance, promotion, and cultural heritage of WS&H techniques through a literature review in Ecuador, considering applications of ancestral techniques by region (coastal, Andean and insular) with a strengths, opportunities, weaknesses, and threats (SWOTs) analysis and a focus group for a strategy proposal of the water supply. The methodology of this study includes the following: (i) an analysis of the evolution of WS&H studies in Ecuador; (ii) a presentation of WS&H techniques and their applications; and (iii) the contribution of WS&H to the Sustainable Development Goals (SDGs), complemented by a SWOTs analysis. The results show that, in Ecuador, WS&H is a method of Nature-based Solutions (NbSs) applied to the problems of water scarcity and is affordable, ecological, and has high efficiency, improving agricultural productivity and guaranteeing water supply for human consumption. The Manglaralto coastal aquifer, a case study in the coastal region of Ecuador, involves WS&H management and artificial aquifer recharge. WS&H structures became a reference for the sustainable development of rural communities that can be replicated nationally and internationally as a resilient alternative to water scarcity and a global climate emergency, contributing to the SDGs of UNESCO.
{"title":"Water Sowing and Harvesting (WS&H) for Sustainable Management in Ecuador: A Review","authors":"Gricelda Herrera-Franco, Fernando Morante-Carballo, Lady Bravo-Montero, Juan Valencia-Robles, Maribel Aguilar-Aguilar, Sergio Martos-Rosillo, P. Carrión-Mero","doi":"10.3390/heritage7070175","DOIUrl":"https://doi.org/10.3390/heritage7070175","url":null,"abstract":"Water Sowing and Harvesting (WS&H) is an ancestral knowledge widely used as a sustainable technique in water management. This study aims to analyse the importance, promotion, and cultural heritage of WS&H techniques through a literature review in Ecuador, considering applications of ancestral techniques by region (coastal, Andean and insular) with a strengths, opportunities, weaknesses, and threats (SWOTs) analysis and a focus group for a strategy proposal of the water supply. The methodology of this study includes the following: (i) an analysis of the evolution of WS&H studies in Ecuador; (ii) a presentation of WS&H techniques and their applications; and (iii) the contribution of WS&H to the Sustainable Development Goals (SDGs), complemented by a SWOTs analysis. The results show that, in Ecuador, WS&H is a method of Nature-based Solutions (NbSs) applied to the problems of water scarcity and is affordable, ecological, and has high efficiency, improving agricultural productivity and guaranteeing water supply for human consumption. The Manglaralto coastal aquifer, a case study in the coastal region of Ecuador, involves WS&H management and artificial aquifer recharge. WS&H structures became a reference for the sustainable development of rural communities that can be replicated nationally and internationally as a resilient alternative to water scarcity and a global climate emergency, contributing to the SDGs of UNESCO.","PeriodicalId":507444,"journal":{"name":"Heritage","volume":"92 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141652803","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In this review, topic modeling—an unsupervised machine learning tool—is employed to analyze research on pigments in cultural heritage published from 1999–2023. The review answers the following question: What are topics and time trends in the past three decades in the analytical study of pigments within cultural heritage (CH) assets? In total, 932 articles are reviewed, ten topics are identified and time trends in the share of these topics are revealed. Each topic is discussed in-depth to elucidate the community, purpose and tools involved in the topic. The time trend analysis shows that dominant topics over time include T1 (the spectroscopic and microscopic study of the stratigraphy of painted CH assets) and T5 (X-ray based techniques for CH, conservation science and archaeometry). However, both topics have experienced a decrease in attention in favor of other topics that more than doubled their topic share, enabled by new technologies and methods for imaging spectroscopy and imaging processing. These topics include T6 (spectral imaging techniques for chemical mapping of painting surfaces) and T10 (the technical study of the pigments and painting methods of historical and contemporary artists). Implications for the field are discussed in conclusion.
{"title":"The Study of Pigments in Cultural Heritage: A Review Using Machine Learning","authors":"Astrid Harth","doi":"10.3390/heritage7070174","DOIUrl":"https://doi.org/10.3390/heritage7070174","url":null,"abstract":"In this review, topic modeling—an unsupervised machine learning tool—is employed to analyze research on pigments in cultural heritage published from 1999–2023. The review answers the following question: What are topics and time trends in the past three decades in the analytical study of pigments within cultural heritage (CH) assets? In total, 932 articles are reviewed, ten topics are identified and time trends in the share of these topics are revealed. Each topic is discussed in-depth to elucidate the community, purpose and tools involved in the topic. The time trend analysis shows that dominant topics over time include T1 (the spectroscopic and microscopic study of the stratigraphy of painted CH assets) and T5 (X-ray based techniques for CH, conservation science and archaeometry). However, both topics have experienced a decrease in attention in favor of other topics that more than doubled their topic share, enabled by new technologies and methods for imaging spectroscopy and imaging processing. These topics include T6 (spectral imaging techniques for chemical mapping of painting surfaces) and T10 (the technical study of the pigments and painting methods of historical and contemporary artists). Implications for the field are discussed in conclusion.","PeriodicalId":507444,"journal":{"name":"Heritage","volume":"92 11","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141657857","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Letizia Ciarlo, Massimo Chiari, M. Galassi, Maurizio Ferretti, Elias Sideras-Haddad, Alessandro Zucchiatti, Elena Castagnotto
This study investigates the practices and rules of Genoese gilding, drawing insights from a 16th-century manuscript containing regulations for gold leaf production. Employing X-ray and ion beam techniques, we quantitatively assess the manuscript’s gold leaf thickness without destructive sampling. Artisanal goldbeater-produced leaves of different thicknesses, applied with a guazzo or mordant technique, served as standards. Further analysis of samples with unknown thickness from the furniture of Palazzo Spinola di Pellicceria in Genoa (Italy) has confirmed the method’s applicability to practical cases. External beam Rutherford backscattering spectrometry (RBS) and particle-induced X-ray emission (PIXE) analyses were carried out using 3 MeV protons at the LABEC accelerator laboratory in Florence. A linear relationship between Gold Lα peak yield and leaf thickness, as measured by RBS, has been established for optimal calibration of portable or hand-held X-Ray fluorescence (XRF) instrumentation for in situ measurements. Moreover, the caratage of the gold foil preserved in the manuscript has been assessed.
本研究调查了热那亚镀金的做法和规则,从一份包含金箔制作规定的 16 世纪手稿中获得启示。我们采用 X 射线和离子束技术,在不进行破坏性取样的情况下对手稿的金箔厚度进行了定量评估。以手工打金机生产的不同厚度的金箔为标准,采用瓜佐或媒染技术。对来自热那亚(意大利)Palazzo Spinola di Pellicceria 家具的未知厚度样本的进一步分析证实了该方法在实际案例中的适用性。在佛罗伦萨 LABEC 加速器实验室使用 3 MeV 质子进行了外部束卢瑟福反向散射光谱法 (RBS) 和粒子诱导 X 射线发射 (PIXE) 分析。通过 RBS 测量,建立了金 Lα 峰值产率与叶片厚度之间的线性关系,以便对用于现场测量的便携式或手持式 X 射线荧光 (XRF) 仪器进行最佳校准。此外,还对保存在手稿中的金箔的克拉度进行了评估。
{"title":"Practices and Rules of 16th Century Genoese Gilding: Exploring Gold Leaf Thickness and Caratage through X-ray and Ion Beam Techniques","authors":"Letizia Ciarlo, Massimo Chiari, M. Galassi, Maurizio Ferretti, Elias Sideras-Haddad, Alessandro Zucchiatti, Elena Castagnotto","doi":"10.3390/heritage7070172","DOIUrl":"https://doi.org/10.3390/heritage7070172","url":null,"abstract":"This study investigates the practices and rules of Genoese gilding, drawing insights from a 16th-century manuscript containing regulations for gold leaf production. Employing X-ray and ion beam techniques, we quantitatively assess the manuscript’s gold leaf thickness without destructive sampling. Artisanal goldbeater-produced leaves of different thicknesses, applied with a guazzo or mordant technique, served as standards. Further analysis of samples with unknown thickness from the furniture of Palazzo Spinola di Pellicceria in Genoa (Italy) has confirmed the method’s applicability to practical cases. External beam Rutherford backscattering spectrometry (RBS) and particle-induced X-ray emission (PIXE) analyses were carried out using 3 MeV protons at the LABEC accelerator laboratory in Florence. A linear relationship between Gold Lα peak yield and leaf thickness, as measured by RBS, has been established for optimal calibration of portable or hand-held X-Ray fluorescence (XRF) instrumentation for in situ measurements. Moreover, the caratage of the gold foil preserved in the manuscript has been assessed.","PeriodicalId":507444,"journal":{"name":"Heritage","volume":"80 18","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141657963","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Along the Arctic and sub-Arctic coasts of Alaska, Siberia, north-eastern China, Hokkaido, Scandinavia and Iceland, people have dressed in clothes or worn shoes made of fish skin for millennia. (Within this article, the terms fish skin and fish leather are used to indicate different processes of the same material. Fish skin: Skin indicates the superficial dermis of an animal. Fish skin is referred to as the historical raw material that is tanned following traditional methods such as mechanical, oiling and smoking tanning, using materials such as bark, brain, urine, fish eggs and corn flour. Fish leather is used to refer that the fish skin has passed one or more stages of industrial vegetable or chrome tanning production and is ready to be used to produce leather goods). These items are often decorated with a rich colour palette of natural dyes provided by nature. In this study, minerals and raw materials of plant origin were collected from riverbanks and processed by Arctic seamstresses who operated as designers, biochemists, zoologists, and climatologists simultaneously. During our research, an international team of fashion, tanning and education specialists used local Arctic and sub-Arctic flora from Sweden, Iceland, and Japan to dye fish leather. Several plants were gathered and sampled on a small scale to test the process and determine the colours they generated based on the historical literature and verbal advice from local experts. This paper describes the process and illustrates the historical use of natural dyes by the Arctic groups originally involved in this craft, building on the traditional cultural heritage that has enabled us to develop sustainable dyeing processes. The results are promising and confirm the applicability of these local plants for dyeing fish skins, providing a basis for a range of natural dye colours from local Arctic flora. The aim is to develop a moderate-sized industrial production of fish leather in this colour palette to replace current unsustainable chemical dyeing processes. This project represents an innovation in material design driven by traditional technologies, addressing changes in interactions between humans and with our environment. The results indicate that new materials, processes, and techniques are often the fruitful marriage of fashion and historical research of traditional methods, helping the industry move towards a more sustainable future.
{"title":"Traditional Fish Leather Dyeing Methods with Indigenous Arctic Plants","authors":"Elisa Palomino, Lotta Rahme, Katrín María Káradóttir, Mitsuhiro Kokita, Sigmundur Páll Freysteinsson","doi":"10.3390/heritage7070173","DOIUrl":"https://doi.org/10.3390/heritage7070173","url":null,"abstract":"Along the Arctic and sub-Arctic coasts of Alaska, Siberia, north-eastern China, Hokkaido, Scandinavia and Iceland, people have dressed in clothes or worn shoes made of fish skin for millennia. (Within this article, the terms fish skin and fish leather are used to indicate different processes of the same material. Fish skin: Skin indicates the superficial dermis of an animal. Fish skin is referred to as the historical raw material that is tanned following traditional methods such as mechanical, oiling and smoking tanning, using materials such as bark, brain, urine, fish eggs and corn flour. Fish leather is used to refer that the fish skin has passed one or more stages of industrial vegetable or chrome tanning production and is ready to be used to produce leather goods). These items are often decorated with a rich colour palette of natural dyes provided by nature. In this study, minerals and raw materials of plant origin were collected from riverbanks and processed by Arctic seamstresses who operated as designers, biochemists, zoologists, and climatologists simultaneously. During our research, an international team of fashion, tanning and education specialists used local Arctic and sub-Arctic flora from Sweden, Iceland, and Japan to dye fish leather. Several plants were gathered and sampled on a small scale to test the process and determine the colours they generated based on the historical literature and verbal advice from local experts. This paper describes the process and illustrates the historical use of natural dyes by the Arctic groups originally involved in this craft, building on the traditional cultural heritage that has enabled us to develop sustainable dyeing processes. The results are promising and confirm the applicability of these local plants for dyeing fish skins, providing a basis for a range of natural dye colours from local Arctic flora. The aim is to develop a moderate-sized industrial production of fish leather in this colour palette to replace current unsustainable chemical dyeing processes. This project represents an innovation in material design driven by traditional technologies, addressing changes in interactions between humans and with our environment. The results indicate that new materials, processes, and techniques are often the fruitful marriage of fashion and historical research of traditional methods, helping the industry move towards a more sustainable future.","PeriodicalId":507444,"journal":{"name":"Heritage","volume":"137 20","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141656044","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ludovico Geminiani, Francesco Paolo Campione, C. Corti, Moira Luraschi, Sandro Recchia, L. Rampazzi
The Japanese textile tradition is renowned for its intricate designs achieved through a variety of dyeing techniques, including kasuri, shibori, and paste-resist dyeing. These techniques are often combined within a single textile, resulting in exceptionally elaborate creations. Our paper delves into the technical aspects and complexities of these methods, highlighting the dynamic interplay between tradition and innovation in Japanese textile production. Our scientific endeavour focused on some textiles dating between the 19th and 20th centuries and belonging to the Montgomery Collection of Japanese folk art. Employing non-invasive techniques such as visible reflectance spectroscopy and ER-FTIR spectroscopy, we uncovered key insights into the materials and methods utilized in the creation of these textiles. Our analysis revealed a diverse array of pigments and dyes, including plant-derived, inorganic, and synthetic variants. These findings illuminate the cultural syncretism between traditional Japanese practices and the adoption of new materials from the West, underscoring the dynamic nature of textile production in Japan. Furthermore, ER-FTIR spectroscopy elucidated the predominant use of cotton as the primary fibre in the textiles, aligning with historical records of Japan’s role as a major producer of cotton yarn. Analysis of white areas within the textiles revealed evidence of resist-paste dyeing techniques, particularly tsutsugaki and katazome, through the absence of dye penetration and the characteristic appearance of white lines. Confirmation of indigo dyeing techniques (aizome) was achieved through ER-FTIR spectroscopy, providing reliable identification of indigo and Prussian blue in various shades of blue present in the textiles. Additionally, the detection of Western-derived dyeing method (utsushi-yūzen) and free-hand painting (kaki-e), offers insights into the diversity of dyeing practices employed by Japanese artisans. The presence of proteinaceous materials and synthetic dyes observed in some textiles has implications for conservation practices, suggesting the need for tailored approaches to ensure the preservation of these culturally significant artifacts. Overall, these scientific results shed new light on the materials, techniques, and cultural contexts underlying Japanese textile production, advancing our understanding of this rich artistic heritage and informing future research endeavours in textile science and conservation.
{"title":"New Evidence of Traditional Japanese Dyeing Techniques: A Spectroscopic Investigation","authors":"Ludovico Geminiani, Francesco Paolo Campione, C. Corti, Moira Luraschi, Sandro Recchia, L. Rampazzi","doi":"10.3390/heritage7070171","DOIUrl":"https://doi.org/10.3390/heritage7070171","url":null,"abstract":"The Japanese textile tradition is renowned for its intricate designs achieved through a variety of dyeing techniques, including kasuri, shibori, and paste-resist dyeing. These techniques are often combined within a single textile, resulting in exceptionally elaborate creations. Our paper delves into the technical aspects and complexities of these methods, highlighting the dynamic interplay between tradition and innovation in Japanese textile production. Our scientific endeavour focused on some textiles dating between the 19th and 20th centuries and belonging to the Montgomery Collection of Japanese folk art. Employing non-invasive techniques such as visible reflectance spectroscopy and ER-FTIR spectroscopy, we uncovered key insights into the materials and methods utilized in the creation of these textiles. Our analysis revealed a diverse array of pigments and dyes, including plant-derived, inorganic, and synthetic variants. These findings illuminate the cultural syncretism between traditional Japanese practices and the adoption of new materials from the West, underscoring the dynamic nature of textile production in Japan. Furthermore, ER-FTIR spectroscopy elucidated the predominant use of cotton as the primary fibre in the textiles, aligning with historical records of Japan’s role as a major producer of cotton yarn. Analysis of white areas within the textiles revealed evidence of resist-paste dyeing techniques, particularly tsutsugaki and katazome, through the absence of dye penetration and the characteristic appearance of white lines. Confirmation of indigo dyeing techniques (aizome) was achieved through ER-FTIR spectroscopy, providing reliable identification of indigo and Prussian blue in various shades of blue present in the textiles. Additionally, the detection of Western-derived dyeing method (utsushi-yūzen) and free-hand painting (kaki-e), offers insights into the diversity of dyeing practices employed by Japanese artisans. The presence of proteinaceous materials and synthetic dyes observed in some textiles has implications for conservation practices, suggesting the need for tailored approaches to ensure the preservation of these culturally significant artifacts. Overall, these scientific results shed new light on the materials, techniques, and cultural contexts underlying Japanese textile production, advancing our understanding of this rich artistic heritage and informing future research endeavours in textile science and conservation.","PeriodicalId":507444,"journal":{"name":"Heritage","volume":"10 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141659311","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The first half of 2023 was dominated by a public discussion of the nature and implications of generative artificial intelligence (genAI) models that are poised to become the most significant cross-cultural global disruptor since the invention of the World-Wide Web. It can be predicted that genAI will affect how cultural heritage is being managed and practiced, primarily by providing analysis and decision-making tools, but also by genAI generated texts and images, in particular reconstructions of objects and sites. The more speculative interpretations of contexts and alternative interpretations generated by genAI models may constitute manifestations of cultural heritage in their own right. But do these constitute human cultural heritage, or are they AI cultural heritage? This paper is a deliberation of the realities and future(s) of cultural heritage in a genAI and post-genAI world.
{"title":"Generative Artificial Intelligence, Human Agency and the Future of Cultural Heritage","authors":"D. Spennemann","doi":"10.3390/heritage7070170","DOIUrl":"https://doi.org/10.3390/heritage7070170","url":null,"abstract":"The first half of 2023 was dominated by a public discussion of the nature and implications of generative artificial intelligence (genAI) models that are poised to become the most significant cross-cultural global disruptor since the invention of the World-Wide Web. It can be predicted that genAI will affect how cultural heritage is being managed and practiced, primarily by providing analysis and decision-making tools, but also by genAI generated texts and images, in particular reconstructions of objects and sites. The more speculative interpretations of contexts and alternative interpretations generated by genAI models may constitute manifestations of cultural heritage in their own right. But do these constitute human cultural heritage, or are they AI cultural heritage? This paper is a deliberation of the realities and future(s) of cultural heritage in a genAI and post-genAI world.","PeriodicalId":507444,"journal":{"name":"Heritage","volume":"122 38","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141665565","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
James Walker, Vincent Gaffney, Rachel Harding, Andrew Iain Fraser, S. Fitch, Victoria Boothby
Order of Authorship [...]
作者顺序 [...]
{"title":"Correction: Walker et al. Winds of Change: Urgent Challenges and Emerging Opportunities in Submerged Prehistory, a Perspective from the North Sea. Heritage 2024, 7, 1947–1968","authors":"James Walker, Vincent Gaffney, Rachel Harding, Andrew Iain Fraser, S. Fitch, Victoria Boothby","doi":"10.3390/heritage7070168","DOIUrl":"https://doi.org/10.3390/heritage7070168","url":null,"abstract":"Order of Authorship [...]","PeriodicalId":507444,"journal":{"name":"Heritage","volume":" 39","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141677288","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}