A measure for the efficiency of a thermoelectric material is the figure of merit defined by ZT = S2T/ρκ, where S, ρ and κ are the electronic transport coefficients, Seebeck coefficient, electrical resistivity and thermal conductiviy, respectively. T is the absolute temperature. Large values for ZT have been realized in nanostructured materials such as superlattices, quantum dots, nanocomposites, and nanowires. In order to achieve further progress, (1) a fundamental understanding of the carrier transport in nanocomposites is necessary, and (2) effective experimental methods for designing, producing and measuring new material compositions with nanocomposite-structures are to be applied. During the last decades, a series of formulas has been derived for calculation of the electronic transport coefficients in composites and disordered alloys. Along the way, some puzzling phenomenons have been solved as why there are simple metals with positive thermopower? and what is the reason for the phenomenon of the “Giant Hall effect”? and what is the reason for the fact that amorphous composites can exist at all? In the present review article, (1), formulas will be presented for calculation of σ = (-1/ρ), κ, S, and R in composites. R, the Hall coefficient, provides additional informations about the type of the dominant electronic carriers and their densities. It will be shown that these formulas can also be applied successfully for calculation of S, ρ, κ and R in nanocomposites if certain conditions are taken into account. Regarding point (2) we shall show that the combinatorial development of materials can provide unfeasible results if applied noncritically.
{"title":"Electronic Transport in Alloys with Phase Separation (Composites)","authors":"J. Sonntag, B. Lenoir, P. Ziółkowski","doi":"10.4236/ojcm.2019.91002","DOIUrl":"https://doi.org/10.4236/ojcm.2019.91002","url":null,"abstract":"A measure for the efficiency of a thermoelectric material is the figure of merit defined by ZT = S2T/ρκ, where S, ρ and κ are the electronic transport coefficients, Seebeck coefficient, electrical resistivity and thermal conductiviy, respectively. T is the absolute temperature. Large values for ZT have been realized in nanostructured materials such as superlattices, quantum dots, nanocomposites, and nanowires. In order to achieve further progress, (1) a fundamental understanding of the carrier transport in nanocomposites is necessary, and (2) effective experimental methods for designing, producing and measuring new material compositions with nanocomposite-structures are to be applied. During the last decades, a series of formulas has been derived for calculation of the electronic transport coefficients in composites and disordered alloys. Along the way, some puzzling phenomenons have been solved as why there are simple metals with positive thermopower? and what is the reason for the phenomenon of the “Giant Hall effect”? and what is the reason for the fact that amorphous composites can exist at all? In the present review article, (1), formulas will be presented for calculation of σ = (-1/ρ), κ, S, and R in composites. R, the Hall coefficient, provides additional informations about the type of the dominant electronic carriers and their densities. It will be shown that these formulas can also be applied successfully for calculation of S, ρ, κ and R in nanocomposites if certain conditions are taken into account. Regarding point (2) we shall show that the combinatorial development of materials can provide unfeasible results if applied noncritically.","PeriodicalId":57868,"journal":{"name":"复合材料期刊(英文)","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-01-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42156509","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The present paper studies water absorption behavior and its consequence on mechanical properties of untreated and chemically treated Sansevieria /carbon fiber reinforced hybrid epoxy (Sria/CF-Ep) composite with calcium carbonate (CaCO3) nanoparticles. Sansevieria /carbon fiber (30/5 wt%) reinforced hybrid epoxy composite with 1.5, 3 and 4.5 wt% of CaCO3 have been developed by hand lay-up method followed by heat press. The water absorption characteristics of the Sria fibers were obtained by immersing the composite samples in sea water at room temperature, until reaching their water content saturation level. The dry and water-immersed hybrid composite samples were subjected to hardness, interlaminar shear, tensile, flexural, and impact tests. The water absorption development of hybrid composites was found to follow Fickian diffusion behavior. Diffusion coefficients and maximum water uptake results were evaluated; the outcome showed that both increased with an increase in filler loading to study the consequence of water penetration in the fiber/matrix interface. The study shows that the mechanical and water-resistant properties of the Sria were improved through chemical treatment and hybridization. Nevertheless, as a result of water penetrating the fiber/matrix interface, longer water-immersion times reduced the tensile and flexural strength of the composites.
{"title":"Influence of Water Ageing on Mechanical Properties of CaCO3 Filler Filled Epoxy Resin and Sansevieria/Carbon Fiber Reinforced Composites","authors":"N. Anjum, B. Suresha, S. A. Prasad","doi":"10.4236/ojcm.2019.91001","DOIUrl":"https://doi.org/10.4236/ojcm.2019.91001","url":null,"abstract":"The present paper studies water absorption behavior and its consequence on mechanical properties of untreated and chemically treated Sansevieria /carbon fiber reinforced hybrid epoxy (Sria/CF-Ep) composite with calcium carbonate (CaCO3) nanoparticles. Sansevieria /carbon fiber (30/5 wt%) reinforced hybrid epoxy composite with 1.5, 3 and 4.5 wt% of CaCO3 have been developed by hand lay-up method followed by heat press. The water absorption characteristics of the Sria fibers were obtained by immersing the composite samples in sea water at room temperature, until reaching their water content saturation level. The dry and water-immersed hybrid composite samples were subjected to hardness, interlaminar shear, tensile, flexural, and impact tests. The water absorption development of hybrid composites was found to follow Fickian diffusion behavior. Diffusion coefficients and maximum water uptake results were evaluated; the outcome showed that both increased with an increase in filler loading to study the consequence of water penetration in the fiber/matrix interface. The study shows that the mechanical and water-resistant properties of the Sria were improved through chemical treatment and hybridization. Nevertheless, as a result of water penetrating the fiber/matrix interface, longer water-immersion times reduced the tensile and flexural strength of the composites.","PeriodicalId":57868,"journal":{"name":"复合材料期刊(英文)","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-01-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43173182","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This study compares the effect of treated pineapple leaves fibres (T-PALF) with sodium hydroxide solution and untreated fibres (N-PALF) on the compressive and flexural strength of earth bricks stabilized with 3% and 5% cement. The fibre content ranged from 0% to 5% in steps of 1% by weight. The compressive strength tests were made at 7, 14, 21 and 28 days of curing; the flexural strength test were conducted at 28th day only. The results show that the T-PALF had a higher compressive strength when comparing to the N-PALF. The highest compressive strength of the bricks was obtained at 28 days of curing. The compressive strength at 28 days of stabilized brick at 3% and 5% of cement reinforced with T-PALF were 4.01 and 4.81 MPa, respectively, while the one reinforced with N-PALF was 3.19 and 4.63 MPa, respectively. The results further show that the highest flexural strength of both stabilized bricks at 3% and 5% of cement reinforced with T-PALF and N-PALF was obtained with the bricks stabilized with 5% of cement reinforced with T-PALF. This results show that bricks stabilized with 5% cement and reinforced with 3% of treated fibres content are good for construction of load bearing walls. It was observed; a significant improvement of the reinforced blocks under flexure than under compression.
{"title":"Compressive and Flexural Strengths of Cement Stabilized Earth Bricks Reinforced with Treated and Untreated Pineapple Leaves Fibres","authors":"Nounagnon A. Vodounon, C. Kanali, J. Mwero","doi":"10.4236/OJCM.2018.84012","DOIUrl":"https://doi.org/10.4236/OJCM.2018.84012","url":null,"abstract":"This study compares the effect of treated pineapple leaves fibres (T-PALF) with sodium hydroxide solution and untreated fibres (N-PALF) on the compressive and flexural strength of earth bricks stabilized with 3% and 5% cement. The fibre content ranged from 0% to 5% in steps of 1% by weight. The compressive strength tests were made at 7, 14, 21 and 28 days of curing; the flexural strength test were conducted at 28th day only. The results show that the T-PALF had a higher compressive strength when comparing to the N-PALF. The highest compressive strength of the bricks was obtained at 28 days of curing. The compressive strength at 28 days of stabilized brick at 3% and 5% of cement reinforced with T-PALF were 4.01 and 4.81 MPa, respectively, while the one reinforced with N-PALF was 3.19 and 4.63 MPa, respectively. The results further show that the highest flexural strength of both stabilized bricks at 3% and 5% of cement reinforced with T-PALF and N-PALF was obtained with the bricks stabilized with 5% of cement reinforced with T-PALF. This results show that bricks stabilized with 5% cement and reinforced with 3% of treated fibres content are good for construction of load bearing walls. It was observed; a significant improvement of the reinforced blocks under flexure than under compression.","PeriodicalId":57868,"journal":{"name":"复合材料期刊(英文)","volume":"08 1","pages":"145-160"},"PeriodicalIF":0.0,"publicationDate":"2018-10-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47928130","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This paper presents the development and technological implementation of textile reinforced concrete (TRC) shells with integrated functions, such as illumination and light control. In that regard the establishment of material, structural and technological foundations along the entire value chain are of central importance: From the light-weight design idea to the demonstrator and reference object, to the technological implementation for the transfer of the research results into practice. The development of the material included the requirement-oriented composition of a high-strength fine grained concrete with an integrated textile reinforcement, such as carbon knitted fabrics. Innovations in formwork solutions provide new possibilities for concrete constructions. So, a bionic optimized shape of the pavilion was developed, realized by four connected TRC-lightweight-shells. The thin-walled TRC-shells were manufactured with a formwork made of glass-fibre reinforced polymer (GFRP). An advantage of the GFRP-formwork is the freedom of design concerning the formwork shape. Moreover, an excellent concrete quality can be achieved, while the production of the precast concrete components is simple and efficient simultaneously. After the production the new TRC-shells were installed and assembled on the campus of TU-Chemnitz. A special feature of the research pavilions are the LED light strips integrated in the shell elements, providing homogeneous illumination.
{"title":"Function-Integrative Textile Reinforced Concrete Shells","authors":"S. Gelbrich, H. Funke, L. Kroll","doi":"10.4236/ojcm.2018.84013","DOIUrl":"https://doi.org/10.4236/ojcm.2018.84013","url":null,"abstract":"This paper presents the development and technological implementation of textile reinforced concrete (TRC) shells with integrated functions, such as illumination and light control. In that regard the establishment of material, structural and technological foundations along the entire value chain are of central importance: From the light-weight design idea to the demonstrator and reference object, to the technological implementation for the transfer of the research results into practice. The development of the material included the requirement-oriented composition of a high-strength fine grained concrete with an integrated textile reinforcement, such as carbon knitted fabrics. Innovations in formwork solutions provide new possibilities for concrete constructions. So, a bionic optimized shape of the pavilion was developed, realized by four connected TRC-lightweight-shells. The thin-walled TRC-shells were manufactured with a formwork made of glass-fibre reinforced polymer (GFRP). An advantage of the GFRP-formwork is the freedom of design concerning the formwork shape. Moreover, an excellent concrete quality can be achieved, while the production of the precast concrete components is simple and efficient simultaneously. After the production the new TRC-shells were installed and assembled on the campus of TU-Chemnitz. A special feature of the research pavilions are the LED light strips integrated in the shell elements, providing homogeneous illumination.","PeriodicalId":57868,"journal":{"name":"复合材料期刊(英文)","volume":"08 1","pages":"161-174"},"PeriodicalIF":0.0,"publicationDate":"2018-10-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46432057","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Marieme Josephine Lette, El Hadji Babacar Ly, Diène Ndiaye, A. Takasaki, T. Okabe
We produced Wood-Polymer Composites (WPCs) with phenolic resin (PR) filled with saw dust (SD) and rice husks (RH) in a PR:fillerratio of 60:40 wt.%. RH and SD were grinded and sieved into particles <160 μm. The aim of this research work was to evaluate sawdust and rice husks as fillers for sustainable phenolic resin based WPCs. Therefore, we investigated the thermal stability of PR/RH and PR/SD WPCs then we studied and compared the tensile, flexural properties of PR/SD and PR/RH WPCs samples, as well as their dimensional stability after water absorption test. Furthermore, through ultraviolet light exposure, we evaluated the effects of photo-oxidation on the water stability and mechanical properties of PR/RH and PR/SD WPCs samples compared to unexposed ones. PR filled with SD presented better mechanical properties compared to PR/RH WPCs samples. However, PR/RH WPCs showed good mechanical properties, and better thermal resistance and better water repulsion capabilities compared to PR/SD WPCs samples. Although, long time UV exposure ended up lowering considerably the mechanical properties and water resistance of PR/SD and PR/RH WPCs, both RH and SD offer great added value as fillers for PR based WPCs; SD having better interactions with PR matrix compared to RH.
{"title":"Evaluation of Sawdust and Rice Husks as Fillers for Phenolic Resin Based Wood-Polymer Composites","authors":"Marieme Josephine Lette, El Hadji Babacar Ly, Diène Ndiaye, A. Takasaki, T. Okabe","doi":"10.4236/OJCM.2018.83010","DOIUrl":"https://doi.org/10.4236/OJCM.2018.83010","url":null,"abstract":"We produced Wood-Polymer Composites (WPCs) with phenolic resin (PR) filled with saw dust (SD) and rice husks (RH) in a PR:fillerratio of 60:40 wt.%. RH and SD were grinded and sieved into particles <160 μm. The aim of this research work was to evaluate sawdust and rice husks as fillers for sustainable phenolic resin based WPCs. Therefore, we investigated the thermal stability of PR/RH and PR/SD WPCs then we studied and compared the tensile, flexural properties of PR/SD and PR/RH WPCs samples, as well as their dimensional stability after water absorption test. Furthermore, through ultraviolet light exposure, we evaluated the effects of photo-oxidation on the water stability and mechanical properties of PR/RH and PR/SD WPCs samples compared to unexposed ones. PR filled with SD presented better mechanical properties compared to PR/RH WPCs samples. However, PR/RH WPCs showed good mechanical properties, and better thermal resistance and better water repulsion capabilities compared to PR/SD WPCs samples. Although, long time UV exposure ended up lowering considerably the mechanical properties and water resistance of PR/SD and PR/RH WPCs, both RH and SD offer great added value as fillers for PR based WPCs; SD having better interactions with PR matrix compared to RH.","PeriodicalId":57868,"journal":{"name":"复合材料期刊(英文)","volume":"08 1","pages":"124-137"},"PeriodicalIF":0.0,"publicationDate":"2018-07-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42303886","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This paper presents experimental and numerical investigation on the parameters effecting energy absorption capability of composite tubular structures at oblique loading to improve crashworthiness performance. Various inclined angles of 5°, 10°, 20° and 30° were selected for the study of off-axis loading. The results indicate that by increasing the lateral inclination angle the mean crushing force and also energy absorption capability of all tested sections decreased. From design perspective, it is necessary to investigate the parameters effecting this phenomenon. The off-axis loading effect that causes significant reduction in energy absorption was investigated and the effected parameters were improved to increase energy absorption capability. To establish this study, 10° off-axis loading was chosen to illustrate the obtained improvement in energy absorption capability. Five cases were studied with combinations of ply-orientation and flat trimming with 45° chamfer. This method was applied to the integrated 10° off-axis loading and the final results showed significant improvement in energy absorption capability of composite absorbers. Finite element model (FEM) was developed to simulate the crushing process of axial and off-axis composite section in LS-DYNA and the results were in good agreement with the experimental data.
{"title":"Laminate Tailoring of Composite Tubular Structures to Improve Crashworthiness Design at Off-Axis Loading","authors":"A. Rabiee, H. Ghasemnejad","doi":"10.4236/ojcm.2018.83008","DOIUrl":"https://doi.org/10.4236/ojcm.2018.83008","url":null,"abstract":"This paper presents experimental and numerical investigation on the parameters effecting energy absorption capability of composite tubular structures at oblique loading to improve crashworthiness performance. Various inclined angles of 5°, 10°, 20° and 30° were selected for the study of off-axis loading. The results indicate that by increasing the lateral inclination angle the mean crushing force and also energy absorption capability of all tested sections decreased. From design perspective, it is necessary to investigate the parameters effecting this phenomenon. The off-axis loading effect that causes significant reduction in energy absorption was investigated and the effected parameters were improved to increase energy absorption capability. To establish this study, 10° off-axis loading was chosen to illustrate the obtained improvement in energy absorption capability. Five cases were studied with combinations of ply-orientation and flat trimming with 45° chamfer. This method was applied to the integrated 10° off-axis loading and the final results showed significant improvement in energy absorption capability of composite absorbers. Finite element model (FEM) was developed to simulate the crushing process of axial and off-axis composite section in LS-DYNA and the results were in good agreement with the experimental data.","PeriodicalId":57868,"journal":{"name":"复合材料期刊(英文)","volume":"08 1","pages":"84-109"},"PeriodicalIF":0.0,"publicationDate":"2018-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48016731","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Natural plant fibers, including flax, kenaf, jute, bamboo, ramie and much more are renewable and sustainable resources and are considered good candidates for cost-effective alternatives to glass and carbon fibers. In this research, cross ply biodegradable composites were fabricated by press-forming method. The biodegradable composites consist of Manila hemp textile as a reinforcement and starch-based biodegradable plastics as a matrix was fabricated and investigated about mechanical properties. The tensile strength increased with the fiber content until fiber content of about 50% and leveled off thereafter. This dependence on the fiber content is due to the decrease in fiber strength of loading direction caused by fiber damages introduced during hot-pressing. In order to decrease the damage of fibers aligned in loading direction, Manila hemp textile was produced by using Manila hemp fibers for warp and biodegradable resin thread for weft. As a result, the tensile strength of cross ply composites increased from 153 MPa to 202 MPa.
{"title":"Fabrication of Manila Hemp Fiber Reinforced Cross Ply Biodegradable Composites and Their Tensile Properties","authors":"S. Ochi","doi":"10.4236/ojcm.2018.83007","DOIUrl":"https://doi.org/10.4236/ojcm.2018.83007","url":null,"abstract":"Natural plant fibers, including flax, kenaf, jute, bamboo, ramie and much more are renewable and sustainable resources and are considered good candidates for cost-effective alternatives to glass and carbon fibers. In this research, cross ply biodegradable composites were fabricated by press-forming method. The biodegradable composites consist of Manila hemp textile as a reinforcement and starch-based biodegradable plastics as a matrix was fabricated and investigated about mechanical properties. The tensile strength increased with the fiber content until fiber content of about 50% and leveled off thereafter. This dependence on the fiber content is due to the decrease in fiber strength of loading direction caused by fiber damages introduced during hot-pressing. In order to decrease the damage of fibers aligned in loading direction, Manila hemp textile was produced by using Manila hemp fibers for warp and biodegradable resin thread for weft. As a result, the tensile strength of cross ply composites increased from 153 MPa to 202 MPa.","PeriodicalId":57868,"journal":{"name":"复合材料期刊(英文)","volume":"08 1","pages":"75-83"},"PeriodicalIF":0.0,"publicationDate":"2018-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41444298","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The easiest and most reliable joining method is the mechanical joint with a bolt and nut or rivet. However, in the case of composite laminates, mechanical joint properties decrease because of lower interlaminar properties compared to in-plane properties around hole. This study investigated needle punching process with the aim of improving the mechanical properties in the thickness direction of fiber-reinforced plastic composite laminates with an open hole. Needle punching process was applied to glass fiber chopped strand matused as the reinforcement for the composite laminates. Open-hole tensile tests and observations of end cross-sections after the tests were performed. The tensile properties and fracture mechanism of the specimens subjected to needle punching process were investigated. In addition, characteristic distance (a parameter for evaluating resistance to fracture in open-hole tensile test specimens) was also calculated to examine the effects of needle punching process conditions on fracture toughness. Tensile strength was improved by more than 15% by needle punching process. However, when a certain needle punching density was exceeded, the mechanical properties worsened. In addition, characteristic distance increased with increasing needle punching density. Thus, these results suggest that there is an optimal needle punching density with respect to strength and characteristic distance.
{"title":"Effect of Needle Punching Process on a Chopped Strand Mat Composite with an Open Hole","authors":"Daiki Ichikawa, H. Hamada, A. Ohtani","doi":"10.4236/ojcm.2018.83009","DOIUrl":"https://doi.org/10.4236/ojcm.2018.83009","url":null,"abstract":"The easiest and most reliable joining method is the mechanical joint with a bolt and nut or rivet. However, in the case of composite laminates, mechanical joint properties decrease because of lower interlaminar properties compared to in-plane properties around hole. This study investigated needle punching process with the aim of improving the mechanical properties in the thickness direction of fiber-reinforced plastic composite laminates with an open hole. Needle punching process was applied to glass fiber chopped strand matused as the reinforcement for the composite laminates. Open-hole tensile tests and observations of end cross-sections after the tests were performed. The tensile properties and fracture mechanism of the specimens subjected to needle punching process were investigated. In addition, characteristic distance (a parameter for evaluating resistance to fracture in open-hole tensile test specimens) was also calculated to examine the effects of needle punching process conditions on fracture toughness. Tensile strength was improved by more than 15% by needle punching process. However, when a certain needle punching density was exceeded, the mechanical properties worsened. In addition, characteristic distance increased with increasing needle punching density. Thus, these results suggest that there is an optimal needle punching density with respect to strength and characteristic distance.","PeriodicalId":57868,"journal":{"name":"复合材料期刊(英文)","volume":"08 1","pages":"110-123"},"PeriodicalIF":0.0,"publicationDate":"2018-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44226608","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Tada, T. Adachi, Yoshiki Tanaka, Y. Aoi, A. Yokoyama, H. Hamada
In recent years, application of carbon-based nano material to electrode material has been paid attention, however, due to its higher cost, it would be difficult to put it into practical use. Then, we have proposed to make nano carbon fiber with lower production cost. The purpose of our research was, to apply our nano carbon fiber to electrical double-layer capacitor electrode. We used cotton candy method to make nano fiber, and applied microwave heating for carbonization. By applying nano carbon fiber to electrical double-layer capacitor electrode, we got results that thicker electrode containing nano carbon fiber leads to lower resistance value, compared with electrode without containing nano carbon fiber. From this result, it was indicated that by containing nano carbon fiber, the electric bypass was formed in the electrode.
{"title":"Application of Nanofiber Fabricated by Cotton Candy Method to Electric Double-Layer Capacitor","authors":"A. Tada, T. Adachi, Yoshiki Tanaka, Y. Aoi, A. Yokoyama, H. Hamada","doi":"10.4236/OJCM.2018.83011","DOIUrl":"https://doi.org/10.4236/OJCM.2018.83011","url":null,"abstract":"In recent years, application of carbon-based nano material to electrode material has been paid attention, however, due to its higher cost, it would be difficult to put it into practical use. Then, we have proposed to make nano carbon fiber with lower production cost. The purpose of our research was, to apply our nano carbon fiber to electrical double-layer capacitor electrode. We used cotton candy method to make nano fiber, and applied microwave heating for carbonization. By applying nano carbon fiber to electrical double-layer capacitor electrode, we got results that thicker electrode containing nano carbon fiber leads to lower resistance value, compared with electrode without containing nano carbon fiber. From this result, it was indicated that by containing nano carbon fiber, the electric bypass was formed in the electrode.","PeriodicalId":57868,"journal":{"name":"复合材料期刊(英文)","volume":"08 1","pages":"138-144"},"PeriodicalIF":0.0,"publicationDate":"2018-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48454222","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Damian Stoddard, Suman Babu Ukyam, R. Prabhakar, A. Rajendran
This paper focuses on the dynamic tensile response of glass-graphite/epoxy composites illustrating improvement in energy absorption through hybridization. The dynamic response and energy absorption characteristics of pultruded hybrid combinations of glass and graphite fibers in an epoxy matrix subjected to induced transverse tension at high strain-rate in a modified Split Hopkinson Pressure Bar (SHPB) apparatus, are presented. Transverse tensile strength was determined by diametral compression of disc samples (Brazilian indirect tensile test method). Diametral crack initiation and strain to failure were monitored with a Shimadzu HPV-2 high-speed video camera at a recording speed of 500,000 fps and Digital Image Correlation (DIC). Adequate measures were taken to ensure that initiation of specimen failure occurred at the exact center of the disc specimen, and propagated through the diameter along the compressive loading axis, for the induced transverse tension tests to be valid. A study of the strength and specific energy absorption demonstrates the benefits of hybridization. Under induced transverse tensile loading condition, the pure glass/epoxy (GL60) exhibited higher strength than pure graphite/epoxy (GR60). Pure graphite/epoxy (GR60) has higher specific energy absorption capacity than pure glass/epoxy (GL60) in transverse tension. Among all hybrids, GR30 has the highest specific energy absorption under transverse tension. Overall, hybrid GL48, with 48% low-cost glass fibers in the inner core and 12% high-cost graphite fibers in outer shell, was found to exhibit better performance under induced transverse tension at high strain-rates, showing the benefits of hybridization.
{"title":"Energy Absorption of Pultruded Glass-Graphite/Epoxy Hybrid Composites under High Strain-Rate Induced Transverse Tension","authors":"Damian Stoddard, Suman Babu Ukyam, R. Prabhakar, A. Rajendran","doi":"10.4236/OJCM.2018.82004","DOIUrl":"https://doi.org/10.4236/OJCM.2018.82004","url":null,"abstract":"This paper focuses on the dynamic tensile response of glass-graphite/epoxy composites illustrating improvement in energy absorption through hybridization. The dynamic response and energy absorption characteristics of pultruded hybrid combinations of glass and graphite fibers in an epoxy matrix subjected to induced transverse tension at high strain-rate in a modified Split Hopkinson Pressure Bar (SHPB) apparatus, are presented. Transverse tensile strength was determined by diametral compression of disc samples (Brazilian indirect tensile test method). Diametral crack initiation and strain to failure were monitored with a Shimadzu HPV-2 high-speed video camera at a recording speed of 500,000 fps and Digital Image Correlation (DIC). Adequate measures were taken to ensure that initiation of specimen failure occurred at the exact center of the disc specimen, and propagated through the diameter along the compressive loading axis, for the induced transverse tension tests to be valid. A study of the strength and specific energy absorption demonstrates the benefits of hybridization. Under induced transverse tensile loading condition, the pure glass/epoxy (GL60) exhibited higher strength than pure graphite/epoxy (GR60). Pure graphite/epoxy (GR60) has higher specific energy absorption capacity than pure glass/epoxy (GL60) in transverse tension. Among all hybrids, GR30 has the highest specific energy absorption under transverse tension. Overall, hybrid GL48, with 48% low-cost glass fibers in the inner core and 12% high-cost graphite fibers in outer shell, was found to exhibit better performance under induced transverse tension at high strain-rates, showing the benefits of hybridization.","PeriodicalId":57868,"journal":{"name":"复合材料期刊(英文)","volume":"08 1","pages":"43-53"},"PeriodicalIF":0.0,"publicationDate":"2018-04-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47325629","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：