Pub Date : 2018-08-01DOI: 10.1109/ICCCEEE.2018.8515790
A. A. Mohamed, Luqman S. Maraaba, Ammar Mishal Elagab
This Paper investigates the improvement of power- system transient stability by means of static synchronous series compensator (SSSC) based damping controller, the structure of the design has been made as an optimization problem by employing the real coded genetic algorithm (RCGA) for the optimal parameter tuning. Remote and local signals are compared considering the time delays. The robustness of the proposed controller has been tested under different conditions for single-machine infinite bus. The simulation results are presented and compared with PSO-based damping controller.
{"title":"Optimal Tuning of SSSC-based Supplemental Damping Controller Employing RCGA","authors":"A. A. Mohamed, Luqman S. Maraaba, Ammar Mishal Elagab","doi":"10.1109/ICCCEEE.2018.8515790","DOIUrl":"https://doi.org/10.1109/ICCCEEE.2018.8515790","url":null,"abstract":"This Paper investigates the improvement of power- system transient stability by means of static synchronous series compensator (SSSC) based damping controller, the structure of the design has been made as an optimization problem by employing the real coded genetic algorithm (RCGA) for the optimal parameter tuning. Remote and local signals are compared considering the time delays. The robustness of the proposed controller has been tested under different conditions for single-machine infinite bus. The simulation results are presented and compared with PSO-based damping controller.","PeriodicalId":6567,"journal":{"name":"2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74925686","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-08-01DOI: 10.1109/ICCCEEE.2018.8515865
T. Hassan, A. Alhassan
Spectral efficiency achieved by Spatial Modulation depends on the number of antennas usedat the transmitter. Increasing number of antennas will lead to cost increment and model complexity, this is considered an obstacle towards high data rates and spectral efficiency. Using software-defined radio, a software replacement to this hardware components could be devised by using tunable frequency transceivers instead of hardware antennas. Through MATLAB simulation, it has been shown that the existing Software Defined Radio transceivers have the ability to perform spatial modulation and outperform MIMO system. Using Software Defined Radio eliminates the hardware barriers, thus exceedingly high data rates and better spectrum efficiency are morelikely.
{"title":"A Proposition for Software Alternative to MIMO System for Spatial Modulation Application","authors":"T. Hassan, A. Alhassan","doi":"10.1109/ICCCEEE.2018.8515865","DOIUrl":"https://doi.org/10.1109/ICCCEEE.2018.8515865","url":null,"abstract":"Spectral efficiency achieved by Spatial Modulation depends on the number of antennas usedat the transmitter. Increasing number of antennas will lead to cost increment and model complexity, this is considered an obstacle towards high data rates and spectral efficiency. Using software-defined radio, a software replacement to this hardware components could be devised by using tunable frequency transceivers instead of hardware antennas. Through MATLAB simulation, it has been shown that the existing Software Defined Radio transceivers have the ability to perform spatial modulation and outperform MIMO system. Using Software Defined Radio eliminates the hardware barriers, thus exceedingly high data rates and better spectrum efficiency are morelikely.","PeriodicalId":6567,"journal":{"name":"2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"77713904","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-08-01DOI: 10.1109/ICCCEEE.2018.8515891
Moez Altayeb, S. Abdalla, A. H. Mustafa
In this paper a solar sun tracking system for two axes solar cell is designed and implemented. The system derived by tow motors controlled by micro-controller. To achieve the sun tracking, three types of sun tracking methods is used. The first one is depending on the location of the tracker system this method requires embedded system, GPS system and mathematical calculation equation. The second type use sensor system to scan the horizontal and vertical axis to find out the locations of the sun and send its data to computing system. The third type is just depending on the time that is determined by computing system to drive the tracker. A data acquisition system and graphical user interface (GUI) software is designed to measuring and plotting all the data of the system. The result is compared with international software tracking program.
{"title":"Dual Axis Solar Sun Tracking System Based on GPS Satellite Receiver and Embedded System","authors":"Moez Altayeb, S. Abdalla, A. H. Mustafa","doi":"10.1109/ICCCEEE.2018.8515891","DOIUrl":"https://doi.org/10.1109/ICCCEEE.2018.8515891","url":null,"abstract":"In this paper a solar sun tracking system for two axes solar cell is designed and implemented. The system derived by tow motors controlled by micro-controller. To achieve the sun tracking, three types of sun tracking methods is used. The first one is depending on the location of the tracker system this method requires embedded system, GPS system and mathematical calculation equation. The second type use sensor system to scan the horizontal and vertical axis to find out the locations of the sun and send its data to computing system. The third type is just depending on the time that is determined by computing system to drive the tracker. A data acquisition system and graphical user interface (GUI) software is designed to measuring and plotting all the data of the system. The result is compared with international software tracking program.","PeriodicalId":6567,"journal":{"name":"2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81117538","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-08-01DOI: 10.1109/ICCCEEE.2018.8515840
M. Esmail, Mohammed A. AlZain
Diabetic retinopathy is a diabetes complication alter the retinal microvasculature. As diabetic side effects on retinopathy may cause no clear symptoms or only mild vision problem, the way of acquire retina image is sophisticated and only at eye clinic, this study proposed to design simple optical system with aid of mobile phone camera and a Web-based telemedicine system for diabetic retinopathy screening. The Web-based system was built on PHP programming language and My SQL for data base management system. The result of acquire retina image with the proposed system is achieved and send through web page for further analysis by ophthalmic specialist. The proposed system offer patients follow-up and reducing the cost for them through using a telemedicine technology for detection.
{"title":"Mobile based Tele-medicine Diabetic Retinopathy Screening","authors":"M. Esmail, Mohammed A. AlZain","doi":"10.1109/ICCCEEE.2018.8515840","DOIUrl":"https://doi.org/10.1109/ICCCEEE.2018.8515840","url":null,"abstract":"Diabetic retinopathy is a diabetes complication alter the retinal microvasculature. As diabetic side effects on retinopathy may cause no clear symptoms or only mild vision problem, the way of acquire retina image is sophisticated and only at eye clinic, this study proposed to design simple optical system with aid of mobile phone camera and a Web-based telemedicine system for diabetic retinopathy screening. The Web-based system was built on PHP programming language and My SQL for data base management system. The result of acquire retina image with the proposed system is achieved and send through web page for further analysis by ophthalmic specialist. The proposed system offer patients follow-up and reducing the cost for them through using a telemedicine technology for detection.","PeriodicalId":6567,"journal":{"name":"2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"73383772","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-08-01DOI: 10.1109/ICCCEEE.2018.8515854
Khaleel Agail Mohamed, Mark George Munier, P. William, Sami A. Nagar, Ali. M. A. Ibrahim
Sudan is rich with different water resources, however there is no control on the water consumption in addition; the water bill is attached to the electric bill and is fixed relative to the geographical location of the customer, nondependent on the consumption rates. The aim of this project is to design and implement an efficient Smart Automatic Water Meter System by selecting the best meter mounting position for accurate measurement, monitoring water consumption, displaying the balance and controlling the water flow of the customer according to their balance received from the designed billing, beside extending the battery lifetime of the water metering system by using isolated mains electricity and a standby battery. The best mounting position was achieved accuracy of 97% for the meter at the horizontal position. The system was developed using the Arduino Uno microcontroller to monitor and control the consumption process through utilizing a solenoid valve according to the balance received from the GUI, which was developed using MATLAB software. Data was transferred to the meter through the RF module. Finally a circuit was developed to increase the battery lifetime of the meter.
{"title":"Enhanced Smart Water Meter Efficiency Based on Mounting Position Selection and Extended Battery Life Time","authors":"Khaleel Agail Mohamed, Mark George Munier, P. William, Sami A. Nagar, Ali. M. A. Ibrahim","doi":"10.1109/ICCCEEE.2018.8515854","DOIUrl":"https://doi.org/10.1109/ICCCEEE.2018.8515854","url":null,"abstract":"Sudan is rich with different water resources, however there is no control on the water consumption in addition; the water bill is attached to the electric bill and is fixed relative to the geographical location of the customer, nondependent on the consumption rates. The aim of this project is to design and implement an efficient Smart Automatic Water Meter System by selecting the best meter mounting position for accurate measurement, monitoring water consumption, displaying the balance and controlling the water flow of the customer according to their balance received from the designed billing, beside extending the battery lifetime of the water metering system by using isolated mains electricity and a standby battery. The best mounting position was achieved accuracy of 97% for the meter at the horizontal position. The system was developed using the Arduino Uno microcontroller to monitor and control the consumption process through utilizing a solenoid valve according to the balance received from the GUI, which was developed using MATLAB software. Data was transferred to the meter through the RF module. Finally a circuit was developed to increase the battery lifetime of the meter.","PeriodicalId":6567,"journal":{"name":"2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88356410","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
this article has been conducted to study the feasibility of using commercial smart mobile application for assessment of hearing and vision abilities. The study selects three free mobile applications compatible with android operation system. The objective of this study is to enable periodic student assessment protocol in the primary schools with easy to use hearing and vision measuring test. The result of such test screen the student abilities and could help in further healthcare support. The experiment test sample was thirty school student and thirty university student. A control comparison has been conducted to evaluate the performance of mobile application tools with control hearing and vision medical device setup. The results of the ’’test your vision app’’ and ’’test vision’’ mobile application were done with optical center. The sensitivity was found around 70% of the samples match with the results of the optical centers devices tests with specificity of 90% to the comparison control sample. An ’’Audiogram’’ hearing device has been compared with the selected hearing check application; the sensitivity was 80% of the samples hearing check application samples comply with specificity of 80% to the control device.
{"title":"Implementation of mobile application for testing hearing and vision:study case","authors":"Alaa Eltayeb Elasayed, Zainab Almardi Albashir, Khaled Ahmed Taha, Alwaleed Abdelrahman","doi":"10.1109/ICCCEEE.2018.8515801","DOIUrl":"https://doi.org/10.1109/ICCCEEE.2018.8515801","url":null,"abstract":"this article has been conducted to study the feasibility of using commercial smart mobile application for assessment of hearing and vision abilities. The study selects three free mobile applications compatible with android operation system. The objective of this study is to enable periodic student assessment protocol in the primary schools with easy to use hearing and vision measuring test. The result of such test screen the student abilities and could help in further healthcare support. The experiment test sample was thirty school student and thirty university student. A control comparison has been conducted to evaluate the performance of mobile application tools with control hearing and vision medical device setup. The results of the ’’test your vision app’’ and ’’test vision’’ mobile application were done with optical center. The sensitivity was found around 70% of the samples match with the results of the optical centers devices tests with specificity of 90% to the comparison control sample. An ’’Audiogram’’ hearing device has been compared with the selected hearing check application; the sensitivity was 80% of the samples hearing check application samples comply with specificity of 80% to the control device.","PeriodicalId":6567,"journal":{"name":"2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86208912","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-08-01DOI: 10.1109/ICCCEEE.2018.8515789
M. Esmail, Y. Osman
Blood is a vital constituent in human body that is indispensable for human life, it supplies nutrient and oxygen to all body cells, because of this essential role, blood bank was introduced in this paper. Manual systems as compared to computerized systems are time consuming, costly, and human errors. A computerized central blood bank management system was developed to assist in managing donor records, monitoring blood screening and storing, moreover provide secure medical reports to improve medical service delivery. The system was designed and implemented as a web-based using My SQL data base, PHP programming language and a bar-code technique. The outcome was obtained as screens that made the recording process of donor's data and blood easer so as to ensure the efficiency of transfusion process. The system was tested in the National Blood Transfusion Center NBTC of Khartoum-Sudan, it contributed to solve errors of manual system, time consuming and retrieve data, as well as met users' acceptance.
{"title":"Computerized Central Blood Bank Management System (CCBBMS)","authors":"M. Esmail, Y. Osman","doi":"10.1109/ICCCEEE.2018.8515789","DOIUrl":"https://doi.org/10.1109/ICCCEEE.2018.8515789","url":null,"abstract":"Blood is a vital constituent in human body that is indispensable for human life, it supplies nutrient and oxygen to all body cells, because of this essential role, blood bank was introduced in this paper. Manual systems as compared to computerized systems are time consuming, costly, and human errors. A computerized central blood bank management system was developed to assist in managing donor records, monitoring blood screening and storing, moreover provide secure medical reports to improve medical service delivery. The system was designed and implemented as a web-based using My SQL data base, PHP programming language and a bar-code technique. The outcome was obtained as screens that made the recording process of donor's data and blood easer so as to ensure the efficiency of transfusion process. The system was tested in the National Blood Transfusion Center NBTC of Khartoum-Sudan, it contributed to solve errors of manual system, time consuming and retrieve data, as well as met users' acceptance.","PeriodicalId":6567,"journal":{"name":"2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82721340","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-08-01DOI: 10.1109/ICCCEEE.2018.8515774
M. Mirghani
Digital filters are widely used in different digital signal processing fields. Filters of finite impulse response (FIR) are characterized with stability and compliance to be adaptive, compared to filters of infinite impulse response (IIR). In general, finite impulse response filters include diverse filter coefficients, compared to moving average filters, which normally use identical coefficients. Moving average filters have very slow roll-off and poor stopband attenuation that contains very high ripples. In this paper, principles and merits of using FIR filters of successive order coefficients are highlighted. Efficient design procedure of those filters is discussed in detail, followed by simulation results that are observed and discussed.
{"title":"Analysis of Successive Coefficients FIR Filter","authors":"M. Mirghani","doi":"10.1109/ICCCEEE.2018.8515774","DOIUrl":"https://doi.org/10.1109/ICCCEEE.2018.8515774","url":null,"abstract":"Digital filters are widely used in different digital signal processing fields. Filters of finite impulse response (FIR) are characterized with stability and compliance to be adaptive, compared to filters of infinite impulse response (IIR). In general, finite impulse response filters include diverse filter coefficients, compared to moving average filters, which normally use identical coefficients. Moving average filters have very slow roll-off and poor stopband attenuation that contains very high ripples. In this paper, principles and merits of using FIR filters of successive order coefficients are highlighted. Efficient design procedure of those filters is discussed in detail, followed by simulation results that are observed and discussed.","PeriodicalId":6567,"journal":{"name":"2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90096165","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-08-01DOI: 10.1109/ICCCEEE.2018.8515794
Osman Abd Allah, S. Abdalla, Marwa Mekki, A. Awadallah
In this paper a user identification system is developed using an RFID technology for registering, monitoring and control of an access pass for security purpose. The system is designed for use in Sudan Atomic Energy Commission premises which helps the managers in monitoring and registers the information to retrieve it in need.The proposed system consists of a control circuit that control a gate entrance, and software which monitors, displays and record user information and system status. The software is capable of reading and displaying the user card number, user name, arrival time, and the number of times the card used and save all these data in a text file in a GUI designed and configured using LabView software. The system makes a special pass for VIP users to access the system at any time. The control circuit is attached with a GSM modem module that can send an SMS message to a master control mobile phone in case of intruders or unauthorized access. The system performance shows an authenticated and effective data records for the long term periods as a monitored registering system.
{"title":"RFID based Access Control and Registration System","authors":"Osman Abd Allah, S. Abdalla, Marwa Mekki, A. Awadallah","doi":"10.1109/ICCCEEE.2018.8515794","DOIUrl":"https://doi.org/10.1109/ICCCEEE.2018.8515794","url":null,"abstract":"In this paper a user identification system is developed using an RFID technology for registering, monitoring and control of an access pass for security purpose. The system is designed for use in Sudan Atomic Energy Commission premises which helps the managers in monitoring and registers the information to retrieve it in need.The proposed system consists of a control circuit that control a gate entrance, and software which monitors, displays and record user information and system status. The software is capable of reading and displaying the user card number, user name, arrival time, and the number of times the card used and save all these data in a text file in a GUI designed and configured using LabView software. The system makes a special pass for VIP users to access the system at any time. The control circuit is attached with a GSM modem module that can send an SMS message to a master control mobile phone in case of intruders or unauthorized access. The system performance shows an authenticated and effective data records for the long term periods as a monitored registering system.","PeriodicalId":6567,"journal":{"name":"2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88861341","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-08-01DOI: 10.1109/ICCCEEE.2018.8515879
Edris Farah, Liu Shaogang
This paper presents dynamic modeling and simulation of a 3 Degrees of freedom manipulator robot using Matlab/SimMechanics. The paper shows how quickly and easily presenting robot in block diagram can solve the complicated forward and inverse dynamic problem of the robot which is very difficult to analyze analytically. Motion planning of the robot joints are created and the inverse and forward dynamic models of the robot are simulated in SimMechanics to generate the torque and motion curves. The resultant torque curves are used to produce the forward dynamic, and obtain the required joints motion. Results showed very good agreement between the planned motion curves and the simulation motion curves which confirm the validity of the approach.
{"title":"An Efficient approach for Manipulator Robot dynamics modeling","authors":"Edris Farah, Liu Shaogang","doi":"10.1109/ICCCEEE.2018.8515879","DOIUrl":"https://doi.org/10.1109/ICCCEEE.2018.8515879","url":null,"abstract":"This paper presents dynamic modeling and simulation of a 3 Degrees of freedom manipulator robot using Matlab/SimMechanics. The paper shows how quickly and easily presenting robot in block diagram can solve the complicated forward and inverse dynamic problem of the robot which is very difficult to analyze analytically. Motion planning of the robot joints are created and the inverse and forward dynamic models of the robot are simulated in SimMechanics to generate the torque and motion curves. The resultant torque curves are used to produce the forward dynamic, and obtain the required joints motion. Results showed very good agreement between the planned motion curves and the simulation motion curves which confirm the validity of the approach.","PeriodicalId":6567,"journal":{"name":"2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE)","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83365925","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：