Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9940015
José Miguel Mostacilla Paz, Gustavo Ezequiel Coria Pantano, Andrés Romero Quete
This article presents a bibliometric analysis and literature review related to dynamic electricity rates, focusing on Time of Use tariff (TOU), Real-Time Pricing (RTP), and Prediction of Use tariff (POU). Through the bibliometric analysis, articles related to these tariffs are determined, which consider the consumption of electrical energy based on the uncertainty of the price of electrical energy, the base load of the users, the increase in distributed generation, the use of electric vehicles, the reduction of the loss of useful life of the assets of the system, among others. Besides, the aforementioned allows a better understanding of trends of research about this specific topic. The analysis reported here may be useful for distribution system operators and the scientific community, but it can also be used as a guide to conduct a review of the literature on other related topics or delve into any of the topics described.
{"title":"Dynamic Electricity Tariff in Distribution Systems: Bibliometric Analysis and Literature Review","authors":"José Miguel Mostacilla Paz, Gustavo Ezequiel Coria Pantano, Andrés Romero Quete","doi":"10.1109/ARGENCON55245.2022.9940015","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9940015","url":null,"abstract":"This article presents a bibliometric analysis and literature review related to dynamic electricity rates, focusing on Time of Use tariff (TOU), Real-Time Pricing (RTP), and Prediction of Use tariff (POU). Through the bibliometric analysis, articles related to these tariffs are determined, which consider the consumption of electrical energy based on the uncertainty of the price of electrical energy, the base load of the users, the increase in distributed generation, the use of electric vehicles, the reduction of the loss of useful life of the assets of the system, among others. Besides, the aforementioned allows a better understanding of trends of research about this specific topic. The analysis reported here may be useful for distribution system operators and the scientific community, but it can also be used as a guide to conduct a review of the literature on other related topics or delve into any of the topics described.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127878931","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9940109
G. Peretti, Santiago Previotto, Federico Beck, S. Felissia, J. Bossio
En los últimos años, las imágenes satelitales han sido ampliamente utilizadas para el estudio de parámetros ambientales. En nuestra región los factores climatológicos tienen incidencia sobre la producción agrícola y ganadera y una predicción de sus impactos posibilitaría la ejecución de estrategias para minimizarlo. Es por ello, que el presente trabajo describe el cálculo y la implementación de un un filtro y un amplificador de bajo ruido (LNA), con el objetivo de utilizar los mismos en conjunto con Antena Yagi-Uda para recibir señales provenientes de satélites de orbita baja, específicamente la recepción de señales de satélites meteorológicos de la serie NOAA.
{"title":"Diseño e implementación de filtro y amplificador de bajo ruido para estación terrena satelital","authors":"G. Peretti, Santiago Previotto, Federico Beck, S. Felissia, J. Bossio","doi":"10.1109/ARGENCON55245.2022.9940109","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9940109","url":null,"abstract":"En los últimos años, las imágenes satelitales han sido ampliamente utilizadas para el estudio de parámetros ambientales. En nuestra región los factores climatológicos tienen incidencia sobre la producción agrícola y ganadera y una predicción de sus impactos posibilitaría la ejecución de estrategias para minimizarlo. Es por ello, que el presente trabajo describe el cálculo y la implementación de un un filtro y un amplificador de bajo ruido (LNA), con el objetivo de utilizar los mismos en conjunto con Antena Yagi-Uda para recibir señales provenientes de satélites de orbita baja, específicamente la recepción de señales de satélites meteorológicos de la serie NOAA.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"70 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128734706","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9940028
José P. Tamagno, Lucas Monaldi, Sergio A. Elaskar, Luis F. Gutiérrez Marcantoni
En este trabajo se encuentran expresiones para describir la evolución de la entalpía de estancamiento en flujos de gases isoentrópicos estacionarios y dependientes del tiempo. Se encuentra que la entalpía de estancamiento permanece constante en flujos estacionarios pero no sucede lo mismo en flujos inestacionarios. Finalmente, se presentan los resultados de simulaciones numéricas de las ecuaciones de Euler mediante el código de acceso libre OpenFOAM. Los resultados numéricos verifican con precisión las expresiones teóricas encontradas tanto en flujo estacionario como en inestacionario.
{"title":"Consideraciones sobre la variación de la entalpía en la dinámica de los gases estacionaria e inestacionaria","authors":"José P. Tamagno, Lucas Monaldi, Sergio A. Elaskar, Luis F. Gutiérrez Marcantoni","doi":"10.1109/ARGENCON55245.2022.9940028","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9940028","url":null,"abstract":"En este trabajo se encuentran expresiones para describir la evolución de la entalpía de estancamiento en flujos de gases isoentrópicos estacionarios y dependientes del tiempo. Se encuentra que la entalpía de estancamiento permanece constante en flujos estacionarios pero no sucede lo mismo en flujos inestacionarios. Finalmente, se presentan los resultados de simulaciones numéricas de las ecuaciones de Euler mediante el código de acceso libre OpenFOAM. Los resultados numéricos verifican con precisión las expresiones teóricas encontradas tanto en flujo estacionario como en inestacionario.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"37 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115446433","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939870
Javier G. Maza, Marco Degioanni, P. M. de la Barrera, Guillermo R. Bossio
Faults caused by voltage unbalances as a consequence of high-resistance connection (HRC) are one of the most common problems in electrical systems. HRC increases torque oscillations and vibrations, and generally affect the normal operation of machines. This article presents an analysis of the behavior of a synchronous reluctance motor drive with HRC. Simulation is performed under balanced and unbalanced conditions to study the consequences of voltage unbalance. Finally, experimental results are shown to make a direct comparison with the simulation ones.
{"title":"Efectos de los contactos de alta resistencia en las máquinas síncronas de reluctancia","authors":"Javier G. Maza, Marco Degioanni, P. M. de la Barrera, Guillermo R. Bossio","doi":"10.1109/ARGENCON55245.2022.9939870","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939870","url":null,"abstract":"Faults caused by voltage unbalances as a consequence of high-resistance connection (HRC) are one of the most common problems in electrical systems. HRC increases torque oscillations and vibrations, and generally affect the normal operation of machines. This article presents an analysis of the behavior of a synchronous reluctance motor drive with HRC. Simulation is performed under balanced and unbalanced conditions to study the consequences of voltage unbalance. Finally, experimental results are shown to make a direct comparison with the simulation ones.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"122 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128113018","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939782
Victor Velasquez, W. Flores
The future of hydropower industry has as key elements, optimization in operation and maintenance, costs reduction and increase of reliability. This means greater challenges in the operation of hydroelectric power plants, therefore, greater demands in maintenance. With technology advances and its role in the industrial sector through the revolution 4.0 or Industry 4.0, artificial intelligence and machine learning applications enables the development and modernization of current maintenance techniques in hydropower plants, through condition monitoring, fault diagnosis and predictive maintenance, thus, an early detection can save a lot of time and money.In this study, two techniques are proposed to enable predictive maintenance in the Peña Blanca hydroelectric power plant, using two deep learning models for anomaly detection. The first one consists of a Deep Neural Network with Logistic Regression to classify various types of failures, for the second one a Recurrent Long Short-Term Memory neural network (LSTM) with Autoencoder is used to classify various flaws. With the first model it was found that it is possible to generalize several types of failures, while the LSTM model adjust better on detecting high temperatures on generator bearings since was a failure that occurred frequently during the study.
{"title":"Machine Learning Approach for Predictive Maintenance in Hydroelectric Power Plants","authors":"Victor Velasquez, W. Flores","doi":"10.1109/ARGENCON55245.2022.9939782","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939782","url":null,"abstract":"The future of hydropower industry has as key elements, optimization in operation and maintenance, costs reduction and increase of reliability. This means greater challenges in the operation of hydroelectric power plants, therefore, greater demands in maintenance. With technology advances and its role in the industrial sector through the revolution 4.0 or Industry 4.0, artificial intelligence and machine learning applications enables the development and modernization of current maintenance techniques in hydropower plants, through condition monitoring, fault diagnosis and predictive maintenance, thus, an early detection can save a lot of time and money.In this study, two techniques are proposed to enable predictive maintenance in the Peña Blanca hydroelectric power plant, using two deep learning models for anomaly detection. The first one consists of a Deep Neural Network with Logistic Regression to classify various types of failures, for the second one a Recurrent Long Short-Term Memory neural network (LSTM) with Autoencoder is used to classify various flaws. With the first model it was found that it is possible to generalize several types of failures, while the LSTM model adjust better on detecting high temperatures on generator bearings since was a failure that occurred frequently during the study.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"34 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128160913","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939980
Cindy Madrid-Chirinos, Andrés Romero Quete, L. Ontiveros, A. Sarasua
This article presents a literature review on tests and diagnostic methods currently applied and under development for High Voltage Instrument Transformers (HVIT). Being HVIT critical assets to monitor and protect power systems, it is relevant to identify which are the methods to take care about their condition during their lifecycle. To supply academics with knowledge of investigation tendencies on this specific subject, a bibliometric analysis was conducted to identify the most relevant publications. It was found that research is mainly concentrated in three areas, calibration of HVIT, maintenance and diagnostic of HVIT and high frequency current transformers employed for partial discharges test. After a compressive bibliometric analysis over the research subject, 24 very close related references were found and described through the literature review. Despite its importance, there is few research on the subject, especially when it is compared with investigation on other HV assets, as is the case of power transformers. The analysis here reported can be useful for asset managers but also can be used as a guide to conduct a literature review in other scientific subjects.
{"title":"Condition Assessment of High Voltage Instrument Transformers: A Bibliometric Analysis and Literature Review","authors":"Cindy Madrid-Chirinos, Andrés Romero Quete, L. Ontiveros, A. Sarasua","doi":"10.1109/ARGENCON55245.2022.9939980","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939980","url":null,"abstract":"This article presents a literature review on tests and diagnostic methods currently applied and under development for High Voltage Instrument Transformers (HVIT). Being HVIT critical assets to monitor and protect power systems, it is relevant to identify which are the methods to take care about their condition during their lifecycle. To supply academics with knowledge of investigation tendencies on this specific subject, a bibliometric analysis was conducted to identify the most relevant publications. It was found that research is mainly concentrated in three areas, calibration of HVIT, maintenance and diagnostic of HVIT and high frequency current transformers employed for partial discharges test. After a compressive bibliometric analysis over the research subject, 24 very close related references were found and described through the literature review. Despite its importance, there is few research on the subject, especially when it is compared with investigation on other HV assets, as is the case of power transformers. The analysis here reported can be useful for asset managers but also can be used as a guide to conduct a literature review in other scientific subjects.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123756426","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9940093
Valeria Navarro, Abigail Ganopol
La misión PANSAT es una demostración tecnológica cuyo objetivo principal es el entrenamiento de estudiantes de la Universidad Tecnológica de Panamá de la cohorte 2020 de las maestrías de la Unidad de Formación Superior y del Instituto Gulich, ambos pertenecientes a la CONAE. Este programa permitirá que las/os estudiantes participen en el diseño, integración, ensayos y operación, como así también el desarrollo de las aplicaciones de la misión cuyos objetivos son la recolección de datos para el seguimiento de buques y monitoreo de humedales en Panamá y Argentina incluyendo regiones marítimas y continentales. Para llevar a cabo esta misión se emplearán dos satélites Cubesat de formato 3U. En este trabajo se describe el proceso general de desarrollo del concepto de operaciones y se presenta el diseño preliminar del concepto de operaciones de la misión PANSAT enfocándose en la filosofía de operación y los escenarios operativos de la misión.
{"title":"Concepto de Operaciones de la Misión PANSAT","authors":"Valeria Navarro, Abigail Ganopol","doi":"10.1109/ARGENCON55245.2022.9940093","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9940093","url":null,"abstract":"La misión PANSAT es una demostración tecnológica cuyo objetivo principal es el entrenamiento de estudiantes de la Universidad Tecnológica de Panamá de la cohorte 2020 de las maestrías de la Unidad de Formación Superior y del Instituto Gulich, ambos pertenecientes a la CONAE. Este programa permitirá que las/os estudiantes participen en el diseño, integración, ensayos y operación, como así también el desarrollo de las aplicaciones de la misión cuyos objetivos son la recolección de datos para el seguimiento de buques y monitoreo de humedales en Panamá y Argentina incluyendo regiones marítimas y continentales. Para llevar a cabo esta misión se emplearán dos satélites Cubesat de formato 3U. En este trabajo se describe el proceso general de desarrollo del concepto de operaciones y se presenta el diseño preliminar del concepto de operaciones de la misión PANSAT enfocándose en la filosofía de operación y los escenarios operativos de la misión.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"32 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122771756","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9940147
C. Rodríguez, Matías Uriarte, Mauricio Espinoza, Efraín Ibaceta, M. Díaz, Enrique Espina
Modular Multilevel Converters are considered one of the most suitable technologies for High-Voltage Direct Current transmission. However, they have been recently proposed in additional applications such as electric vehicle charging, Solid-State Transformers, and motor drives. In this context, this paper presents the modeling and control of a Modular Multilevel Converter for isolated power transference applications. In this proposal, the converter is regulated to perform Medium-Voltage Low-Frequency Alternating Current conversion to Low-Voltage Medium-Frequency Alternating Current required for fast charging of Electric Vehicles. In addition, simulation results obtained with a 500 kW Modular Multilevel Converter Serie model using PLECS are presented to validate the proposed control and topology performance.
{"title":"Control of a Modular Multilevel Converter for Fast Electric Vehicle Charging Applications","authors":"C. Rodríguez, Matías Uriarte, Mauricio Espinoza, Efraín Ibaceta, M. Díaz, Enrique Espina","doi":"10.1109/ARGENCON55245.2022.9940147","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9940147","url":null,"abstract":"Modular Multilevel Converters are considered one of the most suitable technologies for High-Voltage Direct Current transmission. However, they have been recently proposed in additional applications such as electric vehicle charging, Solid-State Transformers, and motor drives. In this context, this paper presents the modeling and control of a Modular Multilevel Converter for isolated power transference applications. In this proposal, the converter is regulated to perform Medium-Voltage Low-Frequency Alternating Current conversion to Low-Voltage Medium-Frequency Alternating Current required for fast charging of Electric Vehicles. In addition, simulation results obtained with a 500 kW Modular Multilevel Converter Serie model using PLECS are presented to validate the proposed control and topology performance.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"44 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121530828","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939722
Daniel Rios-Festner, G. Blanco, Sonia B. López, F. Olsina
This article presents a model that reproduces the long-term dynamics of the Paraguayan generation system, seeking to obtain a capacity expansion schedule under uncertainty. A centralized power dispatch model calculates the capacity addition rate of four technologies in two stages. First, the model dispatches existing technologies and quantifies the unsupplied demand. The dispatch model then assesses candidate technologies to cover the demand mismatch based on their available firm capacity. For each technology, the model calculates the total cost of covering the deficit and computes an optimal investment rate by applying an economic merit order. By considering Paraguay's Gross Domestic Product, and therefore electricity demand, as uncertain variables, this analysis offers empirical probability distribution functions (PDF) for firm capacity reserve margins and average system costs. By doing so, this model constitutes a tool to assess the uncertain long-term dynamics of generation systems from both a macroeconomic and a power system reliability point of view, according to the integration of firm capacity.
{"title":"Stochastic dynamics of the generation expansion in renewable power systems: the Paraguayan case","authors":"Daniel Rios-Festner, G. Blanco, Sonia B. López, F. Olsina","doi":"10.1109/ARGENCON55245.2022.9939722","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939722","url":null,"abstract":"This article presents a model that reproduces the long-term dynamics of the Paraguayan generation system, seeking to obtain a capacity expansion schedule under uncertainty. A centralized power dispatch model calculates the capacity addition rate of four technologies in two stages. First, the model dispatches existing technologies and quantifies the unsupplied demand. The dispatch model then assesses candidate technologies to cover the demand mismatch based on their available firm capacity. For each technology, the model calculates the total cost of covering the deficit and computes an optimal investment rate by applying an economic merit order. By considering Paraguay's Gross Domestic Product, and therefore electricity demand, as uncertain variables, this analysis offers empirical probability distribution functions (PDF) for firm capacity reserve margins and average system costs. By doing so, this model constitutes a tool to assess the uncertain long-term dynamics of generation systems from both a macroeconomic and a power system reliability point of view, according to the integration of firm capacity.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"34 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122227501","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-09-07DOI: 10.1109/ARGENCON55245.2022.9939790
Emmanuel Sangoi, Ulises Manassero, A. Loyarte, J. P. Fernández, Lautaro D. Rossi, Marcos M. Cea
Se consideran los procedimientos fijados en la norma AEA 92606 para la determinación del riesgo existente en ocasión de arco eléctrico. Estos procedimientos se aplican a un caso de estudio específico con el objetivo de analizar la sensibilidad de los resultados a la modificación de las distintas variables intervinientes. Como caso de estudio se analizan dos puntos con distinto nivel de tensión de una subestación de transformación de 13,2/0,4 kV de la ciudad de Santa Fe. Los resultados permiten apreciar la relevancia de las mencionadas variables y el grado de precisión requerido durante el relevamiento de datos para el estudio. Se destaca la importancia asociada a la correcta definición de la corriente de cortocircuito, el tiempo de arco, la distancia de trabajo y la clasificación del recinto donde se produce el arco.
{"title":"Estudio de Riesgo por Arco Eléctrico Según AEA 92606. Análisis de Sensibilidad de Resultados","authors":"Emmanuel Sangoi, Ulises Manassero, A. Loyarte, J. P. Fernández, Lautaro D. Rossi, Marcos M. Cea","doi":"10.1109/ARGENCON55245.2022.9939790","DOIUrl":"https://doi.org/10.1109/ARGENCON55245.2022.9939790","url":null,"abstract":"Se consideran los procedimientos fijados en la norma AEA 92606 para la determinación del riesgo existente en ocasión de arco eléctrico. Estos procedimientos se aplican a un caso de estudio específico con el objetivo de analizar la sensibilidad de los resultados a la modificación de las distintas variables intervinientes. Como caso de estudio se analizan dos puntos con distinto nivel de tensión de una subestación de transformación de 13,2/0,4 kV de la ciudad de Santa Fe. Los resultados permiten apreciar la relevancia de las mencionadas variables y el grado de precisión requerido durante el relevamiento de datos para el estudio. Se destaca la importancia asociada a la correcta definición de la corriente de cortocircuito, el tiempo de arco, la distancia de trabajo y la clasificación del recinto donde se produce el arco.","PeriodicalId":318846,"journal":{"name":"2022 IEEE Biennial Congress of Argentina (ARGENCON)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129479977","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：