Pub Date : 2019-07-31DOI: 10.25139/OJSINF.V4I2.1787
Rahman Jailani, A. Purwanto
Tujuan perancangan adalah untuk membuat game bergenre endless running dan pelestarian budaya Dayak. Game dirancang untuk smartphone berbasis Android. Metode yang di gunakan yaitu dengan menyebar kuesioner kepada responden yang berumur 10 tahun keatas. Penelitian juga dilakukan dengan membandingkan game sejenis. Metode perancangan di mulai dari tahap Analisis Data, Desain Sistem, Pembuatan Program, Pengujian, Implementasi, Evaluasi. Hasil perancangan adalah game “Dayak Run” yang bergenre endless running dan memuat kebudayaan Dayak sebagai tema utama. Simpulan dari skripsi ini adalah perpaduan budaya dayak dalam game Dayak Run merupakan media yang menarik dan efektif untuk melestarikan kebudayaan Dayak. Responden juga terhibur dengan memainkan game “Dayak Run”.
设计的目的是创造一款具有无限运行的类型游戏和Dayak文化保护。这款游戏是为基于Android的智能手机设计的。我们使用的方法是将问卷分发给10岁或以上的受访者。研究也通过比较类型的游戏来进行。设计方法从数据分析、系统设计、程序生成、测试、执行、评估开始。设计是一款具有无限运行的“Dayak Run”游戏，将Dayak文化作为主题。这篇文章的结论是dayaks文化的融合在dayak Run game中是一种有趣而有效的媒体，以保护dayak文化。受访者也喜欢玩“跑”游戏。
{"title":"Rancang Bangun Game 2D Dayak Run Bergenre Endles Running Berbasis Android","authors":"Rahman Jailani, A. Purwanto","doi":"10.25139/OJSINF.V4I2.1787","DOIUrl":"https://doi.org/10.25139/OJSINF.V4I2.1787","url":null,"abstract":"Tujuan perancangan adalah untuk membuat game bergenre endless running dan pelestarian budaya Dayak. Game dirancang untuk smartphone berbasis Android. Metode yang di gunakan yaitu dengan menyebar kuesioner kepada responden yang berumur 10 tahun keatas. Penelitian juga dilakukan dengan membandingkan game sejenis. Metode perancangan di mulai dari tahap Analisis Data, Desain Sistem, Pembuatan Program, Pengujian, Implementasi, Evaluasi. Hasil perancangan adalah game “Dayak Run” yang bergenre endless running dan memuat kebudayaan Dayak sebagai tema utama. Simpulan dari skripsi ini adalah perpaduan budaya dayak dalam game Dayak Run merupakan media yang menarik dan efektif untuk melestarikan kebudayaan Dayak. Responden juga terhibur dengan memainkan game “Dayak Run”.","PeriodicalId":52760,"journal":{"name":"Inform Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi","volume":"27 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76192139","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-07-31DOI: 10.25139/OJSINF.V4I2.1696
Sulthan Fikri Mu'afa, Nurissaidah Ulinnuha
Livestock products are widely used by the community in their daily lives, for example as food ingredients, industrial material sources, labor resources, fertilizer sources and energy sources. This study aims to cluster livestock potential with data on livestock population in Sidoarjo Regency in 2017 with single linkage, complete linkage and average linkage method and comparing performance of the methods. In this cluster, the data will be grouped into 3 clusters. The results of the three clusters were obtained by sixteen sub-districts in the first cluster with the potential for low livestock and each one in the second and third clusters for single linkage and average linkage. While complete linkage obtained fifteen sub-districts in the first cluster with high potential for livestock, two sub-districts in the second cluster with the potential of medium livestock and one sub-district in the third cluster with the potential for high farm animals. In the comparison of the standard deviation ratio value, the smallest value of 0.222 is obtained by complete linkage, which shows that complete linkage is better than single linkage and average linkage in the case of subgrouping based on Sidoarjo regency livestock types.
{"title":"Perbandingan Metode Single Linkage, Complete Linkage Dan Average Linkage dalam Pengelompokan Kecamatan Berdasarkan Variabel Jenis Ternak Kabupaten Sidoarjo","authors":"Sulthan Fikri Mu'afa, Nurissaidah Ulinnuha","doi":"10.25139/OJSINF.V4I2.1696","DOIUrl":"https://doi.org/10.25139/OJSINF.V4I2.1696","url":null,"abstract":"Livestock products are widely used by the community in their daily lives, for example as food ingredients, industrial material sources, labor resources, fertilizer sources and energy sources. This study aims to cluster livestock potential with data on livestock population in Sidoarjo Regency in 2017 with single linkage, complete linkage and average linkage method and comparing performance of the methods. In this cluster, the data will be grouped into 3 clusters. The results of the three clusters were obtained by sixteen sub-districts in the first cluster with the potential for low livestock and each one in the second and third clusters for single linkage and average linkage. While complete linkage obtained fifteen sub-districts in the first cluster with high potential for livestock, two sub-districts in the second cluster with the potential of medium livestock and one sub-district in the third cluster with the potential for high farm animals. In the comparison of the standard deviation ratio value, the smallest value of 0.222 is obtained by complete linkage, which shows that complete linkage is better than single linkage and average linkage in the case of subgrouping based on Sidoarjo regency livestock types.","PeriodicalId":52760,"journal":{"name":"Inform Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi","volume":"29 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"73659799","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-07-31DOI: 10.25139/OJSINF.V4I2.1783
Eka Prasetyaningrum
Tujuan utama Penelitian ini adalah untuk menguji pengaruh Sumber Daya Teknologi Informasi (IT Human Resource,IT Infrastucture Resource, IT Relationship Resource) dan Knowledge Management pada UMKM di Kabupaten Kotawaringin Timur dengan tujuan dapat meningkatkan keunggulan kompetitif dan mampu berdaya saing tinggi dengan perusahaan lainnya. Data dari 160 UMKM di Kabupaten Kotawaringin Timur membuktikan bahwa Sumber daya teknologi informasi yaitu IT Human Resource tidak berpengaruh positif dan tidak signifikan terhadap Kemampuan Knowledge Management, IT Infrastructure Resource dan IT Relationship Resource berpengaruh positif dan signifikan terhadap Knowledge Management. IT Human Resource, IT Infrastructure Resource dan IT Relationship Resource memiliki pengaruh tidak langsung terhadap Keunggulan Kompetitif melalui mediasi Knowledge Management. Sehingga, penelitian ini dapat menjadi pertimbangan untuk para pemilik UMKM untuk dapat menerapkan Teknologi Informasi dan Knowlege Management sebagai salah satu faktor penentu Keunggulan kompetitif perusahaannya.
{"title":"Pengaruh Sumber Daya Teknologi Informasi Terhadap Knowledge Management dan Keunggulan Kompetitif UMKM di Kabupaten Kotawaringin Timur","authors":"Eka Prasetyaningrum","doi":"10.25139/OJSINF.V4I2.1783","DOIUrl":"https://doi.org/10.25139/OJSINF.V4I2.1783","url":null,"abstract":"Tujuan utama Penelitian ini adalah untuk menguji pengaruh Sumber Daya Teknologi Informasi (IT Human Resource,IT Infrastucture Resource, IT Relationship Resource) dan Knowledge Management pada UMKM di Kabupaten Kotawaringin Timur dengan tujuan dapat meningkatkan keunggulan kompetitif dan mampu berdaya saing tinggi dengan perusahaan lainnya. Data dari 160 UMKM di Kabupaten Kotawaringin Timur membuktikan bahwa Sumber daya teknologi informasi yaitu IT Human Resource tidak berpengaruh positif dan tidak signifikan terhadap Kemampuan Knowledge Management, IT Infrastructure Resource dan IT Relationship Resource berpengaruh positif dan signifikan terhadap Knowledge Management. IT Human Resource, IT Infrastructure Resource dan IT Relationship Resource memiliki pengaruh tidak langsung terhadap Keunggulan Kompetitif melalui mediasi Knowledge Management. Sehingga, penelitian ini dapat menjadi pertimbangan untuk para pemilik UMKM untuk dapat menerapkan Teknologi Informasi dan Knowlege Management sebagai salah satu faktor penentu Keunggulan kompetitif perusahaannya.","PeriodicalId":52760,"journal":{"name":"Inform Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi","volume":"112 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80992066","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-03-03DOI: 10.25139/INFORM.V4I1.1372
Nalsa Cintya Resti, Aidina Ristyawan
The career path of an employee does not necessarily immediately become a permanent employee of a company. Employees must go through the stages of contract employees and then undergo a series of tests to be appointed as permanent employees. The determination of contract employees to become permanent employees in PT BAV through a series of tests that require a long time. The assessments and calculations are carried out in stages such as file selection, written tests, psychological tests, interviews, and so on. With a long series of tests it is possible to make mistakes in the final results and the candidates do not getthe criteria required by the company so as to hamper the company's performance. In this study the TOPSIS method is applied to determine the best candidates who can be appointed by the company to become permanent employees. From the calculation results obtained by employee with ID A003 has the best result so that employee can be recommended become permanent employee, furthermore the TOPSIS method can be input for PT BAV Nganjuk Branch related to the determination of candidates who can be appointed as permanent employees. @font-face { font-family: "Times New Roman"; }@font-face { font-family: "宋体"; }@font-face { font-family: "SimSun"; }p.MsoNormal { margin: 0pt 0pt 0.0001pt; text-align: justify; font-family: "Times New Roman"; }span.msoIns { text-decoration: underline; color: blue; }span.msoDel { text-decoration: line-through; color: red; }div.Section0 { }
{"title":"Implementasi Metode Topsis Untuk Rekomendasi Pengangkatan Karyawan Tetap Pada PT. Bina Artha Ventura Cabang Nganjuk","authors":"Nalsa Cintya Resti, Aidina Ristyawan","doi":"10.25139/INFORM.V4I1.1372","DOIUrl":"https://doi.org/10.25139/INFORM.V4I1.1372","url":null,"abstract":"The career path of an employee does not necessarily immediately become a permanent employee of a company. Employees must go through the stages of contract employees and then undergo a series of tests to be appointed as permanent employees. The determination of contract employees to become permanent employees in PT BAV through a series of tests that require a long time. The assessments and calculations are carried out in stages such as file selection, written tests, psychological tests, interviews, and so on. With a long series of tests it is possible to make mistakes in the final results and the candidates do not getthe criteria required by the company so as to hamper the company's performance. In this study the TOPSIS method is applied to determine the best candidates who can be appointed by the company to become permanent employees. From the calculation results obtained by employee with ID A003 has the best result so that employee can be recommended become permanent employee, furthermore the TOPSIS method can be input for PT BAV Nganjuk Branch related to the determination of candidates who can be appointed as permanent employees. @font-face { font-family: \"Times New Roman\"; }@font-face { font-family: \"宋体\"; }@font-face { font-family: \"SimSun\"; }p.MsoNormal { margin: 0pt 0pt 0.0001pt; text-align: justify; font-family: \"Times New Roman\"; }span.msoIns { text-decoration: underline; color: blue; }span.msoDel { text-decoration: line-through; color: red; }div.Section0 { }","PeriodicalId":52760,"journal":{"name":"Inform Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi","volume":"40 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87375477","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Kesehatan adalah hal yang sangat penting basi setiap manusia karena tanpa kesehatan yang baik, maka manusia akan sulit untuk melakukan suatu aktivitas. Untuk menunjang kesehatan pada manusia diperlukan suatu fasilitas kesehatan yang baik. Fasilitas kesehatan ini merupakan tanggung jawab dari pemerintahan yang harus selalu dievaluasi guna meningkatkan pelayanan kesehatan. Dalam penelitian ini dibahas pemanfaatan algoritma clustering dalam mengelompokkan kabupaten atau kota di Jawa Timur menurut jumlah fasilitas pelayanan kesehatan menggunakan Fuzzy C-Means. Dengan analisis klaster akan didapat kelompok-kelompok kabupaten/kota yang memiliki fasilitas yang memadai atau yang kurang memadai. Dengan mengetahui kelompok-kelompok tersebut maka pemerintah Jawa Timur dapat mengetahui kabupaten/kota mana yang harus ditingkatkan fasilitas kesehatannya. Sumber data penelitian ini berasal dari BPS Jawa Timur. Hasil cluster yang didapat kemudian divalidasi dengan sillhoute coefficient dan purity. Dengan centroid yang telah didapatkan pada iterasi terakhir, diperoleh 4 kabupaten/kota termasuk dalam cluster pertama, 26 kabupaten/kota termasuk dalam cluster kedua, dan 8 kabupaten/kota termasuk dalam cluster ketiga. Dari validasi clustering yang dilakukan, didapatkan nilai sillhoute coefficient sebesar 0,695 dan nilai purity sebesar 1.
{"title":"Penerapan Fuzzy C-Means dalam Mengelompokkan Kabupaten/Kota Berdasarkan Fasilitas Pelayanan Kesehatan Di Jawa Timur","authors":"Nurissaidah Ulinnuha, Wardatul Maghfiroh, Aris Fanani","doi":"10.25139/inform.v4i1.1093","DOIUrl":"https://doi.org/10.25139/inform.v4i1.1093","url":null,"abstract":"Kesehatan adalah hal yang sangat penting basi setiap manusia karena tanpa kesehatan yang baik, maka manusia akan sulit untuk melakukan suatu aktivitas. Untuk menunjang kesehatan pada manusia diperlukan suatu fasilitas kesehatan yang baik. Fasilitas kesehatan ini merupakan tanggung jawab dari pemerintahan yang harus selalu dievaluasi guna meningkatkan pelayanan kesehatan. Dalam penelitian ini dibahas pemanfaatan algoritma clustering dalam mengelompokkan kabupaten atau kota di Jawa Timur menurut jumlah fasilitas pelayanan kesehatan menggunakan Fuzzy C-Means. Dengan analisis klaster akan didapat kelompok-kelompok kabupaten/kota yang memiliki fasilitas yang memadai atau yang kurang memadai. Dengan mengetahui kelompok-kelompok tersebut maka pemerintah Jawa Timur dapat mengetahui kabupaten/kota mana yang harus ditingkatkan fasilitas kesehatannya. Sumber data penelitian ini berasal dari BPS Jawa Timur. Hasil cluster yang didapat kemudian divalidasi dengan sillhoute coefficient dan purity. Dengan centroid yang telah didapatkan pada iterasi terakhir, diperoleh 4 kabupaten/kota termasuk dalam cluster pertama, 26 kabupaten/kota termasuk dalam cluster kedua, dan 8 kabupaten/kota termasuk dalam cluster ketiga. Dari validasi clustering yang dilakukan, didapatkan nilai sillhoute coefficient sebesar 0,695 dan nilai purity sebesar 1.","PeriodicalId":52760,"journal":{"name":"Inform Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi","volume":"61 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88517901","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-02-27DOI: 10.25139/INFORM.V4I1.1083
A. Fahruzi, Andy Suryowinoto
The population number of rock trush according to Basuni et al explains that the rock trush population in nature become extinct because it has strong territorial and a lot of hunting due to its typical sound as a chirping bird. The efforts of conservation can be done through breeding activities. By this reason, it is important to do captive breeding and cultivation of rock trush. One of magpie’s cultivation is breeding the rock trush but there is a challenge in breeding when the hatching process. Not only the quality of good embryo, the success of hatching process is depend on ambient temperature. Temperature changes when the hatching process by its mother are influenced by weather during day and night or hot and rainy conditions.The fail of hatching process can make loss to the farmers because of ruck trush has an expensive cost. From these reasons, to increase the success rate of hatching eggs, stability of temperature is needed during the incubation process. In this study, egg incubator was made using HSM-20G sensor as a temperature and humidity sensor that placed in the center of the egg rack. Propotional-Integrative-Derivative (PID) control method is implemented in this system to keep temperature value of 37 C. The PID control is used to regulate the dim and bright light in the bulb when produce heat until the setting point reached. Because of the changing response speed in temperature is relatively slow, so trial and error parameters are made the constant values Kp = 2, Ki = 0.5 and Kd = 0.1, which produce the steady state of error not be more than 0.53% to the temperature set point. In this machine also used a fan to flatten the temperature and there is a hole for air circulation.
根据Basuni等人的说法，岩鸦的种群数量解释了自然界中岩鸦种群的灭绝，因为它具有很强的领土和大量的狩猎，因为它的典型声音是啁啾的鸟。保护工作可以通过繁殖活动来完成。因此，搞好岩雀的圈养繁殖和栽培是十分重要的。喜鹊的养殖方式之一是繁殖岩雀，但在孵化过程中遇到了繁殖的挑战。不仅胚胎质量好，孵化过程的成功与否也取决于环境温度。当其母亲孵化过程中的温度变化受昼夜天气或炎热多雨条件的影响。孵蛋过程的失败会给养殖户造成损失，因为孵蛋成本高昂。因此，为了提高卵的孵化成功率，需要在孵化过程中保持温度的稳定。本研究采用HSM-20G传感器作为温湿度传感器，放置在蛋架中央，制作鸡蛋培养箱。本系统采用比例-积分-导数(PID)控制方法，将温度值保持在37℃，并通过PID控制来调节灯泡发热时的明暗亮度，直至达到设定值。由于在温度下变化的响应速度比较慢，故将试错参数设为恒定值Kp = 2, Ki = 0.5, Kd = 0.1，从而对温度设定点产生稳态误差不大于0.53%。在这台机器中还使用了一个风扇来调节温度，并有一个空气循环孔。
{"title":"Implementasi Kontrol PID Pada Mesin Penetas Telur Burung Murai","authors":"A. Fahruzi, Andy Suryowinoto","doi":"10.25139/INFORM.V4I1.1083","DOIUrl":"https://doi.org/10.25139/INFORM.V4I1.1083","url":null,"abstract":"The population number of rock trush according to Basuni et al explains that the rock trush population in nature become extinct because it has strong territorial and a lot of hunting due to its typical sound as a chirping bird. The efforts of conservation can be done through breeding activities. By this reason, it is important to do captive breeding and cultivation of rock trush. One of magpie’s cultivation is breeding the rock trush but there is a challenge in breeding when the hatching process. Not only the quality of good embryo, the success of hatching process is depend on ambient temperature. Temperature changes when the hatching process by its mother are influenced by weather during day and night or hot and rainy conditions.The fail of hatching process can make loss to the farmers because of ruck trush has an expensive cost. From these reasons, to increase the success rate of hatching eggs, stability of temperature is needed during the incubation process. In this study, egg incubator was made using HSM-20G sensor as a temperature and humidity sensor that placed in the center of the egg rack. Propotional-Integrative-Derivative (PID) control method is implemented in this system to keep temperature value of 37 C. The PID control is used to regulate the dim and bright light in the bulb when produce heat until the setting point reached. Because of the changing response speed in temperature is relatively slow, so trial and error parameters are made the constant values Kp = 2, Ki = 0.5 and Kd = 0.1, which produce the steady state of error not be more than 0.53% to the temperature set point. In this machine also used a fan to flatten the temperature and there is a hole for air circulation.","PeriodicalId":52760,"journal":{"name":"Inform Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi","volume":"117 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85257539","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-01-31DOI: 10.25139/INFORM.V4I1.1209
Hendra Dinata
A production information system can be employed by companies to help with the production functions. Using the production information system, production activities become better because the data processing becomes faster and more accurate to regulate production schedules, record the use of raw materials, even it can be used to assist in decision making. In the example of garment and carpet companies, where both are companies engaged in the production of textile products, they still have their own distinct characteristics. Instead of having to develop their own production information system that is only suitable to be implemented in one company but not suitable to be implemented in other companies, a production information system is developed as a configurable system according to the needs of each user company. For this reason, it is necessary to analyze what is the difference between companies so that the system can accommodate all their needs. The system that has been designed is then tested on each company that has different characteristics by first configuring the system so that the system is in accordance with their needs. It is known that although the system implemented is the same system, the system is still able to accommodate the needs of each company. Thus, the cost of developing a system can be reduced because there is no need for the system to be independently developed specifically for each different company
{"title":"Analisis dan Perancangan Sistem Informasi Produksi yang Dapat Dikonfigurasi pada Perusahaan Garmen dan Karpet","authors":"Hendra Dinata","doi":"10.25139/INFORM.V4I1.1209","DOIUrl":"https://doi.org/10.25139/INFORM.V4I1.1209","url":null,"abstract":"A production information system can be employed by companies to help with the production functions. Using the production \u0000information system, production activities become better because the data processing becomes faster and more accurate to regulate production schedules, record the use of raw materials, even it can be used to assist in decision making. In the example of garment and carpet companies, where both are companies engaged in the production of textile products, they still have their own distinct characteristics. Instead of having to develop their own production information system that is only suitable to be implemented in one company but not suitable to be implemented in other companies, a production information system is developed as a configurable system according to the needs of each user company. For this reason, it is necessary to analyze what is the difference between companies so that the system can accommodate all their needs. The system that has been designed is then tested on each company that has different characteristics by first configuring the system so that the system is in accordance with their needs. It is known that although the system implemented is the same system, the system is still able to accommodate the needs of each company. Thus, the cost of developing a system can be reduced because there is no need for the system to be independently developed specifically for each different company","PeriodicalId":52760,"journal":{"name":"Inform Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi","volume":"52 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90266737","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-01-31DOI: 10.25139/INFORM.V4I1.1170
A. Utami, Faridatun Nadziroh
Penelitian ini bertujuan memenuhi kebutuhan para jamaah umrah maupun masyarakat umum melalui visualisasi animasi 3D berteknologi Augmented Reality berbasis Android. Dalam penelitian ini digunakan Unity untuk membangun aplikasi Android, Vuforia SDK untuk membangun teknologi Augmented Reality, dan Blender untuk membuat animasi 3D. Marker dilayout dalam buku panduan ibadah umrah yang digunakan untuk menampilkan proses pelaksanaan Thawaf dan Sa’i dalam bentuk animasi 3D. Berdasarkan hasil pengujian, dapat disimpulkan bahwa aplikasi yang dibangun dapat menampilkan semua objek 3D dari semua marker yang tertera pada buku panduan dan dapat membantu jamaah umrah maupun masyarakat umum untuk mendapatkan visualisasi ibadah umrah melalui animasi 3D.
{"title":"Implementasi Teknologi Augmented Reality dalam Visualisasi Ibadah Umrah Menggunakan Metode Marker Based Tracking pada Android","authors":"A. Utami, Faridatun Nadziroh","doi":"10.25139/INFORM.V4I1.1170","DOIUrl":"https://doi.org/10.25139/INFORM.V4I1.1170","url":null,"abstract":"Penelitian ini bertujuan memenuhi kebutuhan para jamaah umrah maupun masyarakat umum melalui visualisasi animasi 3D berteknologi Augmented Reality berbasis Android. Dalam penelitian ini digunakan Unity untuk membangun aplikasi Android, Vuforia SDK untuk membangun teknologi Augmented Reality, dan Blender untuk membuat animasi 3D. Marker dilayout dalam buku panduan ibadah umrah yang digunakan untuk menampilkan proses pelaksanaan Thawaf dan Sa’i dalam bentuk animasi 3D. Berdasarkan hasil pengujian, dapat disimpulkan bahwa aplikasi yang dibangun dapat menampilkan semua objek 3D dari semua marker yang tertera pada buku panduan dan dapat membantu jamaah umrah maupun masyarakat umum untuk mendapatkan visualisasi ibadah umrah melalui animasi 3D. ","PeriodicalId":52760,"journal":{"name":"Inform Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi","volume":"5 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78114269","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-01-31DOI: 10.25139/inform.v4i1.1403
Nurahman, Prihandoko
Diabetes Mellitus (DM) merupakan salah satu penyakit yang dapat membawa seseorang berujung pada suatu kematian. Peyebab utama dari penyakit ini adalah pola hidup dan makanan yang tidak teratur atau berlebihan. Seseorang yang terserang penyakit diabetes akan ditandai dengan meningkat kadar gula. Hal ini terjadi karena adanya gangguan pada sekresi insulin dan kerja insulin atau bahkan pada keduanya. Di diberbagai negara semakin banyak pasien penyakit diabetes, jika tidak segera dihentikan maka diperkirakan penderita penyakit diabetes akan mencapai 642 jiwa pada tahun 2040 [1]. Penelitian ini bertujuan untuk memilih Clasifiers data mining yang terbaik dalam melakukan diagnosis terhadap penyakit Diabetes Mellitus (DM). Diagnosis yang dilakukan berbasis sistem komputer dengan menggunakan metode seleksi fitur dan klasifikasi terhadap Dataset Pima Indians Diabetes . Metode seleksi fitur yang digunakan adalah Correlation based Featured Selection (CFS) . Hasil klasifikasi data mining pada penelitian ini menunjukkan bahwa SMO memiliki nilai akurasi tertinggi dibanding Classifiers yang lainnya.
{"title":"PERBANDINGAN HASIL ANALISIS TEKNIK DATA MINING “METODE DECISION TREE, NAIVE BAYES, SMO DAN PART” UNTUK MENDIAGNOSA PENYAKIT DIABETES MELLITUS","authors":"Nurahman, Prihandoko","doi":"10.25139/inform.v4i1.1403","DOIUrl":"https://doi.org/10.25139/inform.v4i1.1403","url":null,"abstract":"Diabetes Mellitus (DM) merupakan salah satu penyakit yang dapat membawa seseorang berujung pada suatu kematian. Peyebab utama dari penyakit ini adalah pola hidup dan makanan yang tidak teratur atau berlebihan. Seseorang yang terserang penyakit diabetes akan ditandai dengan meningkat kadar gula. Hal ini terjadi karena adanya gangguan pada sekresi insulin dan kerja insulin atau bahkan pada keduanya. Di diberbagai negara semakin banyak pasien penyakit diabetes, jika tidak segera dihentikan maka diperkirakan penderita penyakit diabetes akan mencapai 642 jiwa pada tahun 2040 [1]. Penelitian ini bertujuan untuk memilih Clasifiers data mining yang terbaik dalam melakukan diagnosis terhadap penyakit Diabetes Mellitus (DM). Diagnosis yang dilakukan berbasis sistem komputer dengan menggunakan metode seleksi fitur dan klasifikasi terhadap Dataset Pima Indians Diabetes . Metode seleksi fitur yang digunakan adalah Correlation based Featured Selection (CFS) . Hasil klasifikasi data mining pada penelitian ini menunjukkan bahwa SMO memiliki nilai akurasi tertinggi dibanding Classifiers yang lainnya.","PeriodicalId":52760,"journal":{"name":"Inform Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi","volume":"30 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88521143","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2019-01-31DOI: 10.25139/INFORM.V4I1.1420
J. Andry, Tonny Prayogo, Rakkha Leonardi Wijaya, Yohanes Kantona
Shopee is a company engaged in e-commerce or commonly called online goods sales. This research was conducted to determine the effectiveness of Shopee advertisements on television to the people of Jakarta. Shopee as an advertiser uses advertising with the aim to attract new consumers to shop at Shopee. The effectiveness of advertising is measured using the Customer Response Index (CRI) measurement method. The CRI method measures the response of Shopee ad audience from various stages, starting from awareness, comprehend, interest, intentions, and actions. This response stage in the CRI is used to measure the effectiveness of Shopee advertisements with the theme "Super Goyang Shopee". In this study, effectiveness is illustrated in the theory of integrated marketing communication and the theory of the effectiveness of advertising. This type of research is descriptive research with a quantitative approach. The results of this study were Shopee advertisements on television in the effective Jakarta community and managed to meet the goals that Shopee wanted to achieve, namely at the interest stage of 66%.
{"title":"EFFECTIVENESS OF SHOPEE TELEVISION ADVERTISING THEMED \"SUPER GOYANG SHOPEE\" IN JAKARTA SOCIETY","authors":"J. Andry, Tonny Prayogo, Rakkha Leonardi Wijaya, Yohanes Kantona","doi":"10.25139/INFORM.V4I1.1420","DOIUrl":"https://doi.org/10.25139/INFORM.V4I1.1420","url":null,"abstract":"Shopee is a company engaged in e-commerce or commonly called online goods sales. This research was conducted to determine the effectiveness of Shopee advertisements on television to the people of Jakarta. Shopee as an advertiser uses advertising with the aim to attract new consumers to shop at Shopee. The effectiveness of advertising is measured using the Customer Response Index (CRI) measurement method. The CRI method measures the response of Shopee ad audience from various stages, starting from awareness, comprehend, interest, intentions, and actions. This response stage in the CRI is used to measure the effectiveness of Shopee advertisements with the theme \"Super Goyang Shopee\". In this study, effectiveness is illustrated in the theory of integrated marketing communication and the theory of the effectiveness of advertising. This type of research is descriptive research with a quantitative approach. The results of this study were Shopee advertisements on television in the effective Jakarta community and managed to meet the goals that Shopee wanted to achieve, namely at the interest stage of 66%.","PeriodicalId":52760,"journal":{"name":"Inform Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi","volume":"24 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91360878","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：