Pub Date : 2017-09-01DOI: 10.1109/NAP.2017.8190295
V. Shaternik, O. Suvorov, A. Shapovalov, T. Prikhna, T. Serbenyuk
New type of Josephson junctions with hybrid nanostructured barriers has been fabricated and investigated. Heterostructures consisting of superconducting MoRe electrodes with a critical temperature about 9 K and a silicon film with a thickness of several dozens of nm (sandwiched between them) were fabricated. The silicon layer was doped by tungsten with various atomic concentrations. By using an atomic force microscope we have investigated a relief of the every layer of the fabricated Josephson junction, as a result it has been demonstrated a possibility to observe a formation of the cluster structure of tungsten in the silicon layer in the Josephson junction barrier on a nano-sized level. Measured I-V curves of these junctions demonstrate that the well-known parameter of these junctions (named the characteristic voltage) has record values. The observation is explained as the fingerprint of “open” channels in the charge transmission due to resonance-percolating trajectories inside the strongly inhomogeneous silicon interlayer with metallic nanoclusters.
{"title":"Improved design josephson junctions with hybrid nanostructured barriers","authors":"V. Shaternik, O. Suvorov, A. Shapovalov, T. Prikhna, T. Serbenyuk","doi":"10.1109/NAP.2017.8190295","DOIUrl":"https://doi.org/10.1109/NAP.2017.8190295","url":null,"abstract":"New type of Josephson junctions with hybrid nanostructured barriers has been fabricated and investigated. Heterostructures consisting of superconducting MoRe electrodes with a critical temperature about 9 K and a silicon film with a thickness of several dozens of nm (sandwiched between them) were fabricated. The silicon layer was doped by tungsten with various atomic concentrations. By using an atomic force microscope we have investigated a relief of the every layer of the fabricated Josephson junction, as a result it has been demonstrated a possibility to observe a formation of the cluster structure of tungsten in the silicon layer in the Josephson junction barrier on a nano-sized level. Measured I-V curves of these junctions demonstrate that the well-known parameter of these junctions (named the characteristic voltage) has record values. The observation is explained as the fingerprint of “open” channels in the charge transmission due to resonance-percolating trajectories inside the strongly inhomogeneous silicon interlayer with metallic nanoclusters.","PeriodicalId":6516,"journal":{"name":"2017 IEEE 7th International Conference Nanomaterials: Application & Properties (NAP)","volume":"197 1","pages":"04NESP07-1-04NESP07-4"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83098327","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-09-01DOI: 10.1109/NAP.2017.8190416
T. V. Lyutyy, Elena Stanislavovna Denisova, A. Kvasnina
We considered the coupled motion of the magnetic moment of a ferromagnetic uniaxial nanoparticle and its mechanical rotation about the center of mass. This particle is supposed to be placed into a viscous liquid and excited by an external alternating magnetic field. Two modes of motion were studied analytically in the noise-free approximation. Within the first mode, both the nanoparticle magnetic moment and easy axis perform small oscillations around the initial position. The oscillation amplitudes were obtained in the harmonic approximation. Just the magnetic moment demonstrates the resonant behaviour that causes the main features of the oscillation mode. Within the second mode, the nanoparticle magnetic moment and easy axis are rotated synchronously. In this case we obtained the system of algebraic equations, where the precession and lag angles of the magnetic moment and easy axis are the solutions of these equations. The results obtained allow to make an analysis of the mechanism of ferrofluids heating by alternating magnetic fields.
{"title":"Forced coupled motion of the nanoparticle magnetic moment and the whole nanoparticle in a viscous fluid","authors":"T. V. Lyutyy, Elena Stanislavovna Denisova, A. Kvasnina","doi":"10.1109/NAP.2017.8190416","DOIUrl":"https://doi.org/10.1109/NAP.2017.8190416","url":null,"abstract":"We considered the coupled motion of the magnetic moment of a ferromagnetic uniaxial nanoparticle and its mechanical rotation about the center of mass. This particle is supposed to be placed into a viscous liquid and excited by an external alternating magnetic field. Two modes of motion were studied analytically in the noise-free approximation. Within the first mode, both the nanoparticle magnetic moment and easy axis perform small oscillations around the initial position. The oscillation amplitudes were obtained in the harmonic approximation. Just the magnetic moment demonstrates the resonant behaviour that causes the main features of the oscillation mode. Within the second mode, the nanoparticle magnetic moment and easy axis are rotated synchronously. In this case we obtained the system of algebraic equations, where the precession and lag angles of the magnetic moment and easy axis are the solutions of these equations. The results obtained allow to make an analysis of the mechanism of ferrofluids heating by alternating magnetic fields.","PeriodicalId":6516,"journal":{"name":"2017 IEEE 7th International Conference Nanomaterials: Application & Properties (NAP)","volume":"18 1","pages":"02MFPM09-1-02MFPM09-4"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86616865","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-09-01DOI: 10.1109/NAP.2017.8190355
Mert Akyurekli, Meltem Gonulol, Alper Bayram, I. Yariçi, Y. Ozturk
In this study, optical properties of produced magnetic liquid investigated by means of optical transmission and linear dichroism with respect to applied external magnetic field up to 100 Oe. Magnetic fluid of around 7 pH value were prepared by using magnetic nanoparticles synthesized by the co-precipitation method, surfactant and carrier liquid. Also, polarization dependent maximum transmission difference was measured as 40% for polarization parallel and 20% for polarization perpendicular to the applied field in the case of magnetic field perpendicular to the optical path. Maximum transmission change of %10 was obtained when the applied magnetic field parallel to the optical path.
{"title":"Investigation of optical properties of ferrofluid by using magneto-optical transmission and linear dichroism","authors":"Mert Akyurekli, Meltem Gonulol, Alper Bayram, I. Yariçi, Y. Ozturk","doi":"10.1109/NAP.2017.8190355","DOIUrl":"https://doi.org/10.1109/NAP.2017.8190355","url":null,"abstract":"In this study, optical properties of produced magnetic liquid investigated by means of optical transmission and linear dichroism with respect to applied external magnetic field up to 100 Oe. Magnetic fluid of around 7 pH value were prepared by using magnetic nanoparticles synthesized by the co-precipitation method, surfactant and carrier liquid. Also, polarization dependent maximum transmission difference was measured as 40% for polarization parallel and 20% for polarization perpendicular to the applied field in the case of magnetic field perpendicular to the optical path. Maximum transmission change of %10 was obtained when the applied magnetic field parallel to the optical path.","PeriodicalId":6516,"journal":{"name":"2017 IEEE 7th International Conference Nanomaterials: Application & Properties (NAP)","volume":"72 1","pages":"02MAN10-1-02MAN10-4"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86283641","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-09-01DOI: 10.1109/NAP.2017.8190202
K. Dyadyura, T. Hovorun, O. Pylypenko, M. V. Hovorun, V. Pererva
Results of scientific researches show the trend of active using nitrides and borides of transition metals and their combination in developing protective materials. While single elements nitrides have been well studied, their multilayer modifications and combinations require more detailed study. Physical-mechanical properties and structural-phase state of multilayer nanocoating according to the deposition conditions is an important task for the study. A thin coating of TiAlN was deposited on R6M5 high-speed steel using an curent magnetron sputtering (DCMS) process. The microstructure and mechanical properties of deposited TiAlN films were investigated. It was shown that the morphology of the TiAlN coating mainly depends on the morphology of the substrate surface and the growth parameters of the coating.
{"title":"Influence of roughness of the substrate on the structure and mechanical properties of TiAlN nanocoating condensed by DCMS","authors":"K. Dyadyura, T. Hovorun, O. Pylypenko, M. V. Hovorun, V. Pererva","doi":"10.1109/NAP.2017.8190202","DOIUrl":"https://doi.org/10.1109/NAP.2017.8190202","url":null,"abstract":"Results of scientific researches show the trend of active using nitrides and borides of transition metals and their combination in developing protective materials. While single elements nitrides have been well studied, their multilayer modifications and combinations require more detailed study. Physical-mechanical properties and structural-phase state of multilayer nanocoating according to the deposition conditions is an important task for the study. A thin coating of TiAlN was deposited on R6M5 high-speed steel using an curent magnetron sputtering (DCMS) process. The microstructure and mechanical properties of deposited TiAlN films were investigated. It was shown that the morphology of the TiAlN coating mainly depends on the morphology of the substrate surface and the growth parameters of the coating.","PeriodicalId":6516,"journal":{"name":"2017 IEEE 7th International Conference Nanomaterials: Application & Properties (NAP)","volume":"25 1","pages":"01FNC10-1-01FNC10-4"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86390335","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-09-01DOI: 10.1109/NAP.2017.8190217
M. Hussein, I. J. Rajmohan, Q. Clément, N. Vukadinovic, Y. Haik
Polyurethane (PU) matrix reinforced with carbon nanofillers forms a nanocomposite, which in addition helps to attain unique material properties by the use of the extreme high aspect ratio and nanoscopic dimensions of the nanofillers. Multi-walled carbon nanotubes (MWCNTs) are used as the nanofillers with weight percentage (wt%) ranging from 1% to 10%. The electromagnetic properties of the nanocomposites are then extracted and these show that the novel nanocomposite is a potential candidate for various microwave applications. MWCNT functionalized with Iron (Fe3O4) is used to prepare CNT/PU nanocomposites in three distinct concentrations, with lower weight percentage of 5% Fe3O4 and higher weight percentage of 20 % Fe3O4. The effect of Fe3O4 on the electrical conductivity is then analyzed and the results show the undesirable oxidization effect of Fe3O4, which significantly reduced the electrical conductivity of the composites. The oxidization effect is verified by comparing the performance of CNT-Fe3O4/PU composites with Fe3O4 powder/PU composites.
{"title":"Synthesis and analysis of iron-dopped CNT/PU composites for microwave applications","authors":"M. Hussein, I. J. Rajmohan, Q. Clément, N. Vukadinovic, Y. Haik","doi":"10.1109/NAP.2017.8190217","DOIUrl":"https://doi.org/10.1109/NAP.2017.8190217","url":null,"abstract":"Polyurethane (PU) matrix reinforced with carbon nanofillers forms a nanocomposite, which in addition helps to attain unique material properties by the use of the extreme high aspect ratio and nanoscopic dimensions of the nanofillers. Multi-walled carbon nanotubes (MWCNTs) are used as the nanofillers with weight percentage (wt%) ranging from 1% to 10%. The electromagnetic properties of the nanocomposites are then extracted and these show that the novel nanocomposite is a potential candidate for various microwave applications. MWCNT functionalized with Iron (Fe<inf>3</inf>O<inf>4</inf>) is used to prepare CNT/PU nanocomposites in three distinct concentrations, with lower weight percentage of 5% Fe<inf>3</inf>O<inf>4</inf> and higher weight percentage of 20 % Fe<inf>3</inf>O<inf>4</inf>. The effect of Fe<inf>3</inf>O<inf>4</inf> on the electrical conductivity is then analyzed and the results show the undesirable oxidization effect of Fe<inf>3</inf>O<inf>4</inf>, which significantly reduced the electrical conductivity of the composites. The oxidization effect is verified by comparing the performance of CNT-Fe<inf>3</inf>O<inf>4</inf>/PU composites with Fe<inf>3</inf>O<inf>4</inf> powder/PU composites.","PeriodicalId":6516,"journal":{"name":"2017 IEEE 7th International Conference Nanomaterials: Application & Properties (NAP)","volume":"14 1","pages":"03CBN04-1-03CBN04-5"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87471387","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-09-01DOI: 10.1109/NAP.2017.8190258
V. Demchenko, M. Iurzhenko
Using WAXS and SAXS methods it was founded that constant magnetic field effect on the melt of polymers (i.e. on the polymers in viscous-flow status, where the structure elements have the maximum mobility) causes formation of oriented welded joint structure with the axle coincides with the magnetic field effect direction. This effect causes improvement of operation properties of the welds due to the orientation of magnet-anisotropic macromolecules and aggregates in the polymer melts. Basing on the mechanical tests results it was founded that tensile strength of PE-80/PP-80 joint welded under the effect of constant magnetic field (acting transversally to the welding axle) is 12 MPa, and of welded without magnetic field effect is 6 MPa.
{"title":"Peculiarities of constant magnetic field effect on the nanostructural organization and properties of hard-to-weld polyethylene-polypropylene joints","authors":"V. Demchenko, M. Iurzhenko","doi":"10.1109/NAP.2017.8190258","DOIUrl":"https://doi.org/10.1109/NAP.2017.8190258","url":null,"abstract":"Using WAXS and SAXS methods it was founded that constant magnetic field effect on the melt of polymers (i.e. on the polymers in viscous-flow status, where the structure elements have the maximum mobility) causes formation of oriented welded joint structure with the axle coincides with the magnetic field effect direction. This effect causes improvement of operation properties of the welds due to the orientation of magnet-anisotropic macromolecules and aggregates in the polymer melts. Basing on the mechanical tests results it was founded that tensile strength of PE-80/PP-80 joint welded under the effect of constant magnetic field (acting transversally to the welding axle) is 12 MPa, and of welded without magnetic field effect is 6 MPa.","PeriodicalId":6516,"journal":{"name":"2017 IEEE 7th International Conference Nanomaterials: Application & Properties (NAP)","volume":"18 1","pages":"03NNSA10-1-03NNSA10-3"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89154056","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-09-01DOI: 10.1109/NAP.2017.8190341
Mindaugas Gicevicius, A. Ramanavičienė, L. Mikoliūnaitė, A. Ramanavičius
Conducting polymers have been widely applied in various sensing platforms. The application of conducting polymers in optical sensing systems is shortly overviewed and discussed in this paper. Some studies on pH, halide anions, heavy metal ions and gas sensors are presented along with their sensing characteristics and possible fields of application. Interactions that lead to a change in optical properties of conducting polymers and production of analytical signal for different analytes are explained briefly.
{"title":"Optical sensors based on electrochromic conducting polymers","authors":"Mindaugas Gicevicius, A. Ramanavičienė, L. Mikoliūnaitė, A. Ramanavičius","doi":"10.1109/NAP.2017.8190341","DOIUrl":"https://doi.org/10.1109/NAP.2017.8190341","url":null,"abstract":"Conducting polymers have been widely applied in various sensing platforms. The application of conducting polymers in optical sensing systems is shortly overviewed and discussed in this paper. Some studies on pH, halide anions, heavy metal ions and gas sensors are presented along with their sensing characteristics and possible fields of application. Interactions that lead to a change in optical properties of conducting polymers and production of analytical signal for different analytes are explained briefly.","PeriodicalId":6516,"journal":{"name":"2017 IEEE 7th International Conference Nanomaterials: Application & Properties (NAP)","volume":"104 1","pages":"04NB29-1-04NB29-3"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79165311","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-09-01DOI: 10.1109/NAP.2017.8190377
V. Lykah, N. Dyakonenko, A. V. Sinelnik, V. Bilozertseva, I. A. Korzh
The results of experimental and theoretical investigation of thin chalcogenide films are presented. Transmission electron microscopy demonstrated amorphous cluster structure at nanostructure level. The order parameters (bond angle and interatomic distance) are introduced. Cluster boundaries in terms of the order parameters have been obtained and analyzed.
{"title":"Clusters and boundaries in chalcogenide amorphous films","authors":"V. Lykah, N. Dyakonenko, A. V. Sinelnik, V. Bilozertseva, I. A. Korzh","doi":"10.1109/NAP.2017.8190377","DOIUrl":"https://doi.org/10.1109/NAP.2017.8190377","url":null,"abstract":"The results of experimental and theoretical investigation of thin chalcogenide films are presented. Transmission electron microscopy demonstrated amorphous cluster structure at nanostructure level. The order parameters (bond angle and interatomic distance) are introduced. Cluster boundaries in terms of the order parameters have been obtained and analyzed.","PeriodicalId":6516,"journal":{"name":"2017 IEEE 7th International Conference Nanomaterials: Application & Properties (NAP)","volume":"51 1","pages":"02NTF17-1-02NTF17-4"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79204815","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-09-01DOI: 10.1109/NAP.2017.8190145
S. Dukarov, V. P. Pojda, I. Churilov
The wetting of nickel films deposited on NaCl (100), Si (111), and GaAs (111) single crystals by island lead condensates has been studied. It has been shown that with an increase of the Ni film thickness the contact angle changes from the value corresponding to the wetting of a clean single-crystal substrate to the wetting of the bulk nickel one. Complete substrates properties damping was achieved at nickel thicknesses of about 40, 90 and 20 nm for NaCl, Si, and GaAs, respectively. The contact angle θ change has been explained by the heterogeneity of the wettable surface. It seems to be that such heterogeneity is a result of both: the chemical interaction of the nickel film with silicon and gallium arsenide, and the nickel dissolution in liquid lead.
{"title":"Wetting of nickel films of variable thickness by island lead condensates","authors":"S. Dukarov, V. P. Pojda, I. Churilov","doi":"10.1109/NAP.2017.8190145","DOIUrl":"https://doi.org/10.1109/NAP.2017.8190145","url":null,"abstract":"The wetting of nickel films deposited on NaCl (100), Si (111), and GaAs (111) single crystals by island lead condensates has been studied. It has been shown that with an increase of the Ni film thickness the contact angle changes from the value corresponding to the wetting of a clean single-crystal substrate to the wetting of the bulk nickel one. Complete substrates properties damping was achieved at nickel thicknesses of about 40, 90 and 20 nm for NaCl, Si, and GaAs, respectively. The contact angle θ change has been explained by the heterogeneity of the wettable surface. It seems to be that such heterogeneity is a result of both: the chemical interaction of the nickel film with silicon and gallium arsenide, and the nickel dissolution in liquid lead.","PeriodicalId":6516,"journal":{"name":"2017 IEEE 7th International Conference Nanomaterials: Application & Properties (NAP)","volume":"23 1","pages":"01PCSI08-1-01PCSI08-5"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86940039","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-09-01DOI: 10.1109/NAP.2017.8190210
M. Lisovenko, O. Bondar, M. Opielak, V. Beresnev, P. Konarski, R. Sakenova, S. Konstantinov, F. Komarov
Multilayered nanostructured coatings consisting of MoN and CrN alternating layers have been considered. The coatings obtained by arc-vacuum deposition in 3 series with different bias potential. The thickness of bilayers has been varied from micro (1.73 μm) to nanosizes (36÷41 nm). Parameters of deposition have been changed, such as bias potential from −20 V to −300 V and chamber pressure from 7×10−4 to 3×10−3 Torr. An element and structural analysis performed with XRD, SEM (with EDS), RBS, SIMS methods has shown well properties of obtained coatings, with clearly allocated layers of CrN and MoN. It is found formation of mononitride CrN and Mo2N with cubic lattice NaCl-type. Decreasing of bilayers thickness to (36÷41) nm has provided high hardness (38÷42) GPa and wear resistance. Remarkable that increasing of chamber pressure leads to increase of wear resistance.
{"title":"Structure and properties of nanoscale MoN/CrN multilayered coatings","authors":"M. Lisovenko, O. Bondar, M. Opielak, V. Beresnev, P. Konarski, R. Sakenova, S. Konstantinov, F. Komarov","doi":"10.1109/NAP.2017.8190210","DOIUrl":"https://doi.org/10.1109/NAP.2017.8190210","url":null,"abstract":"Multilayered nanostructured coatings consisting of MoN and CrN alternating layers have been considered. The coatings obtained by arc-vacuum deposition in 3 series with different bias potential. The thickness of bilayers has been varied from micro (1.73 μm) to nanosizes (36÷41 nm). Parameters of deposition have been changed, such as bias potential from −20 V to −300 V and chamber pressure from 7×10<sup>−4</sup> to 3×10<sup>−3</sup> Torr. An element and structural analysis performed with XRD, SEM (with EDS), RBS, SIMS methods has shown well properties of obtained coatings, with clearly allocated layers of CrN and MoN. It is found formation of mononitride CrN and Mo<inf>2</inf>N with cubic lattice NaCl-type. Decreasing of bilayers thickness to (36÷41) nm has provided high hardness (38÷42) GPa and wear resistance. Remarkable that increasing of chamber pressure leads to increase of wear resistance.","PeriodicalId":6516,"journal":{"name":"2017 IEEE 7th International Conference Nanomaterials: Application & Properties (NAP)","volume":"65 1","pages":"01FNC20-1-01FNC20-4"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91069676","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：