Pub Date : 2024-07-10DOI: 10.31004/jutin.v7i3.29943
P. Sakti, Junarto Junarto
Delays in implementing construction projects can have negative impacts on contractors and owners. Contractors whose construction projects are late will experience losses in terms of time and costs, because the profits expected by the contractor will be reduced, or even no profits at all. Respondent characteristics based on the questionnaire were classified into several categories, work experience, latest education, company category and field of work in the company. Factors causing delays in work on the Ambemali Road Improvement construction project, Jln. Belalo – Jln. Lasolo, Wawotobi District, Konawe Regency, according to the perception of PPK/PPTK, Directors, Consultants and Service Providers (Contractors) of PT Kendari Baruga Pratama, is caused by Labor Factors with indicators of contractor negligence, Equipment Factors with indicators of Equipment Damage, material factors with this being the lack of material available around the work site , financial factors indicating limited contractor funds, managerial factors namely inappropriate implementation methods, design suitability factors indicating design changes and other factors namely material sources far from the work location.
{"title":"Analisis Faktor Keterlambatan Penyelesaian Proyek Peningkatan Jalan Ruas Ambemali (Studi Kasus Jln. Belalo/Lasolo – Jln. Arisunggu)","authors":"P. Sakti, Junarto Junarto","doi":"10.31004/jutin.v7i3.29943","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.29943","url":null,"abstract":"Delays in implementing construction projects can have negative impacts on contractors and owners. Contractors whose construction projects are late will experience losses in terms of time and costs, because the profits expected by the contractor will be reduced, or even no profits at all. Respondent characteristics based on the questionnaire were classified into several categories, work experience, latest education, company category and field of work in the company. Factors causing delays in work on the Ambemali Road Improvement construction project, Jln. Belalo – Jln. Lasolo, Wawotobi District, Konawe Regency, according to the perception of PPK/PPTK, Directors, Consultants and Service Providers (Contractors) of PT Kendari Baruga Pratama, is caused by Labor Factors with indicators of contractor negligence, Equipment Factors with indicators of Equipment Damage, material factors with this being the lack of material available around the work site , financial factors indicating limited contractor funds, managerial factors namely inappropriate implementation methods, design suitability factors indicating design changes and other factors namely material sources far from the work location.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"62 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835254","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-07-10DOI: 10.31004/jutin.v7i3.28810
Muhammad Hatta Mahmuda, Rana Ardila Rahma
In work in the current industrial era, both on a small and large scale, there is almost always a risk of danger. One of them is an occupational disease caused by errors in body posture when doing work. This research aims to analyze the body posture and performance of an employee in the quality control division. The method used is the Nordic body map questionnaire and RULA calculations. The results obtained were that the job of polishing components and measuring components got a grand score of 7. Meanwhile, the job of wiping components and checking data got a grand score of 4. So the body posture of the quality control division employees was not ergonomic and needed to be repaired.
{"title":"Analisis Postur Kerja pada Operator Quality Control Terhadap Kualitas Kinerja Menggunakan Metode RULA di PT XYZ","authors":"Muhammad Hatta Mahmuda, Rana Ardila Rahma","doi":"10.31004/jutin.v7i3.28810","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.28810","url":null,"abstract":"In work in the current industrial era, both on a small and large scale, there is almost always a risk of danger. One of them is an occupational disease caused by errors in body posture when doing work. This research aims to analyze the body posture and performance of an employee in the quality control division. The method used is the Nordic body map questionnaire and RULA calculations. The results obtained were that the job of polishing components and measuring components got a grand score of 7. Meanwhile, the job of wiping components and checking data got a grand score of 4. So the body posture of the quality control division employees was not ergonomic and needed to be repaired.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"37 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835655","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-30DOI: 10.31004/jutin.v7i1.24735
Nur Asma Deli, Antonius Jumadi Sihotang, Hanifah Khairiah
Biodiesel is an alternative diesel fuel made from renewable materials such as vegetable and animal sources. Used cooking oil is waste cooking oil that is often found in households, very easy to obtain and always available all the time. Used cooking oil can be used as raw material for making biodiesel because it contains triglycerides through a transesterification process with the addition of a base catalyst, one of which is the ash of empty palm fruit bunches. This research aims to determine the effect of adding ash from empty palm fruit bunches on making biodiesel from used cooking oil. The method used in this research is transesterification with the addition of a catalyst of empty palm fruit bunch ash varied at concentrations of 1%, 2%, 3%, 4%, 5% with a mole ratio of 1: 6 (oil: methanol). The tests on the biodiesel produced consist of acid number, viscosity and density.
{"title":"Produksi Biodiesel Dari Minyak Goreng Bekas Menggunakan Katalis Abu Tandan Kosong Sawit","authors":"Nur Asma Deli, Antonius Jumadi Sihotang, Hanifah Khairiah","doi":"10.31004/jutin.v7i1.24735","DOIUrl":"https://doi.org/10.31004/jutin.v7i1.24735","url":null,"abstract":"Biodiesel is an alternative diesel fuel made from renewable materials such as vegetable and animal sources. Used cooking oil is waste cooking oil that is often found in households, very easy to obtain and always available all the time. Used cooking oil can be used as raw material for making biodiesel because it contains triglycerides through a transesterification process with the addition of a base catalyst, one of which is the ash of empty palm fruit bunches. This research aims to determine the effect of adding ash from empty palm fruit bunches on making biodiesel from used cooking oil. The method used in this research is transesterification with the addition of a catalyst of empty palm fruit bunch ash varied at concentrations of 1%, 2%, 3%, 4%, 5% with a mole ratio of 1: 6 (oil: methanol). The tests on the biodiesel produced consist of acid number, viscosity and density.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"36 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140481093","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-30DOI: 10.31004/jutin.v7i1.25768
Alfian Bima Chandra, A. Farahdiansari, Rizky Stighfarrinata
Purwosari Community Health Center provides structured healthcare services with two types of services, inpatient and outpatient care. Although inpatient services run smoothly, nurse shift scheduling still relies on Microsoft Excel and often encounters schedule conflicts. To address this issue, the use of genetic algorithm method is proposed. Genetic algorithm offers multi-criteria and multi-objective solutions for scheduling, integrating concepts from genetics and scientific biological processes. Thus, the "schedule collision" problem can be effectively addressed, enhancing the efficiency of nurse shift scheduling in Purwosari Community Health Center's inpatient care.
Purwosari 社区医疗中心提供住院和门诊两种结构化医疗服务。虽然住院服务运行顺利，但护士排班仍依赖于 Microsoft Excel，经常会遇到排班冲突。为解决这一问题，建议使用遗传算法方法。遗传算法融合了遗传学和科学生物过程的概念，为排班提供了多标准和多目标的解决方案。因此，"排班冲突 "问题可以得到有效解决，从而提高 Purwosari 社区卫生中心住院护理中护士排班的效率。
{"title":"Optimasi Penjadwalan Perawat Dan Bidan Dengan Pendekatan Metode Algoritma Genetika Pada Puskesmas Kecamatan Purwosari","authors":"Alfian Bima Chandra, A. Farahdiansari, Rizky Stighfarrinata","doi":"10.31004/jutin.v7i1.25768","DOIUrl":"https://doi.org/10.31004/jutin.v7i1.25768","url":null,"abstract":"Purwosari Community Health Center provides structured healthcare services with two types of services, inpatient and outpatient care. Although inpatient services run smoothly, nurse shift scheduling still relies on Microsoft Excel and often encounters schedule conflicts. To address this issue, the use of genetic algorithm method is proposed. Genetic algorithm offers multi-criteria and multi-objective solutions for scheduling, integrating concepts from genetics and scientific biological processes. Thus, the \"schedule collision\" problem can be effectively addressed, enhancing the efficiency of nurse shift scheduling in Purwosari Community Health Center's inpatient care.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"180 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140484964","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-30DOI: 10.31004/jutin.v7i1.25815
Razita Hariani, Fatmayati Fatmayati
81.5 million m3 of palm oil stem is produced every year. Stem fiber can be used as source of cellulose for the making of carboxymethyl cellulose(CMC). CMC is widely used in the pharmaceutical, food, textile and cosmetic industries. The aim of this research is to determine the best reaction time. The procedure consists of 3 initial stages and 2 core stages, namely, sample preparation, reducing the size to 50 mesh, delignification using a 15% NaOH solution for 3 hours, bleaching using a 6% NaOCl solution for 3 hours, alkalization using isopropanol and alkalized with 15% NaOH for 1 hour, in the carboxymethylation stage, sodium monochloroacetate (NaMCA) was added with time variations of 2, 3, 4, 5 and 6 hours. The results showed that 5 hours reaction times produces CMC with degree of substitution of 1.64, a viscosity of 123.5 cP, a pH of 6.1 and a water content of 1.2%.
{"title":"Pembuatan Carboxymethyl Cellulose (CMC) Dari Batang Kelapa Sawit","authors":"Razita Hariani, Fatmayati Fatmayati","doi":"10.31004/jutin.v7i1.25815","DOIUrl":"https://doi.org/10.31004/jutin.v7i1.25815","url":null,"abstract":"81.5 million m3 of palm oil stem is produced every year. Stem fiber can be used as source of cellulose for the making of carboxymethyl cellulose(CMC). CMC is widely used in the pharmaceutical, food, textile and cosmetic industries. The aim of this research is to determine the best reaction time. The procedure consists of 3 initial stages and 2 core stages, namely, sample preparation, reducing the size to 50 mesh, delignification using a 15% NaOH solution for 3 hours, bleaching using a 6% NaOCl solution for 3 hours, alkalization using isopropanol and alkalized with 15% NaOH for 1 hour, in the carboxymethylation stage, sodium monochloroacetate (NaMCA) was added with time variations of 2, 3, 4, 5 and 6 hours. The results showed that 5 hours reaction times produces CMC with degree of substitution of 1.64, a viscosity of 123.5 cP, a pH of 6.1 and a water content of 1.2%.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"58 13","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140485661","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-29DOI: 10.31004/jutin.v7i1.24720
Hanifah Khairiah, Fatmayati Fatmayati, Anna Dhora
The solid wastes of palm oil are palm shell and boiler ash which can be used as adsorbents. Adsorbent is a solid substance that an adsorption process which is used for the refining process of used cooking oil. Used cooking oil is oil derived from leftover cooking oil which has a higher saturated fatty acid content than new vegetable oil. This study aims to determine the process of making adsorbents, the process of refining used cooking oil, and the effect of adsorbent variations on the purification of used cooking oil. This research was carried out with the adsorption process, adding 15% of the adsorbent variation. The process of making the adsorbent was carried out by dehydration, carbonization at 6000C, and activation with 3% HCl for 24 hours. The results of the optimum adsorbent variation were 100% palm shell adsorbent with the results of analysis on used cooking oil after adsorption, namely: 0.05% water content, 0.58% ALB content, and 1.7 mgO2/100g peroxide number.
{"title":"Pemanfaatan Limbah Padat Kelapa Sawit untuk Pemurnian Minyak Goreng Bekas","authors":"Hanifah Khairiah, Fatmayati Fatmayati, Anna Dhora","doi":"10.31004/jutin.v7i1.24720","DOIUrl":"https://doi.org/10.31004/jutin.v7i1.24720","url":null,"abstract":"The solid wastes of palm oil are palm shell and boiler ash which can be used as adsorbents. Adsorbent is a solid substance that an adsorption process which is used for the refining process of used cooking oil. Used cooking oil is oil derived from leftover cooking oil which has a higher saturated fatty acid content than new vegetable oil. This study aims to determine the process of making adsorbents, the process of refining used cooking oil, and the effect of adsorbent variations on the purification of used cooking oil. This research was carried out with the adsorption process, adding 15% of the adsorbent variation. The process of making the adsorbent was carried out by dehydration, carbonization at 6000C, and activation with 3% HCl for 24 hours. The results of the optimum adsorbent variation were 100% palm shell adsorbent with the results of analysis on used cooking oil after adsorption, namely: 0.05% water content, 0.58% ALB content, and 1.7 mgO2/100g peroxide number.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"52 34","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140487226","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-29DOI: 10.31004/jutin.v7i1.25452
Yasmin Mauliddina, P. Kasih
Humanitarian aid relief has been operational since the late 19th century, addressing development and disaster aid cases. The intricate relationship between humanitarian aid relief and the supply chain encompasses various stages, from securing funding to coordinating stakeholders. However, the volatile and uncertain nature of the field poses challenges such as corruption, prolonged funding gaps, and demands for accountability and visibility. This study highlights the critical role of funding and financing in the humanitarian supply chain, emphasizing the underdeveloped state of research on supply chain finance (SCF). The paper aims to investigate the integration of SCF into humanitarian aid relief, utilizing literature reviews from journals, papers, and reports.The findings reveal a correlation between SCF's essential elements—focused on liquidity/cash, operational activities, and engagement among actors. This research proposes a framework, how the humanitarian aid relief sequence and SCF theory should collaborate for effective humanitarian aid supply chain finance (HASCF) practices
{"title":"The Role of Supply Chain Finance in Humanitarian Aid Relief : Literature Review","authors":"Yasmin Mauliddina, P. Kasih","doi":"10.31004/jutin.v7i1.25452","DOIUrl":"https://doi.org/10.31004/jutin.v7i1.25452","url":null,"abstract":"Humanitarian aid relief has been operational since the late 19th century, addressing development and disaster aid cases. The intricate relationship between humanitarian aid relief and the supply chain encompasses various stages, from securing funding to coordinating stakeholders. However, the volatile and uncertain nature of the field poses challenges such as corruption, prolonged funding gaps, and demands for accountability and visibility. This study highlights the critical role of funding and financing in the humanitarian supply chain, emphasizing the underdeveloped state of research on supply chain finance (SCF). The paper aims to investigate the integration of SCF into humanitarian aid relief, utilizing literature reviews from journals, papers, and reports.The findings reveal a correlation between SCF's essential elements—focused on liquidity/cash, operational activities, and engagement among actors. This research proposes a framework, how the humanitarian aid relief sequence and SCF theory should collaborate for effective humanitarian aid supply chain finance (HASCF) practices","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"24 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140489357","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-27DOI: 10.31004/jutin.v7i1.25028
Putri Sekar Hamidah, Agustian Suseno, Billy Nugraha
Increasing demand and changing consumer desires over time have triggered the company PT. XYZ to try to fulfill the desires and follow product developments among consumers. This research is research that aims to analyze the production capacity of polyester fiber with several forecasting methods as consideration between the two, namely Double Moving Average and Linear Regression. This research is located at PT. XYZ, in this research only examined the production of polyester fibers. The Double Moving Average method shows that the error rate in the form of Mean Squared Error produces 24,891 polyester fiber items, while the Linear Regression method shows that the error rate in the form of Mean Squared Error produces 594 polyester fiber items. So a comparison between the two forecasting methods shows that the Linear Regression method has the smallest error rate and is the best method for producing polyester fiber for the following months.
{"title":"Analisa Perencanaan Kapasitas Produksi Fiber Polyester Menggunakan Metode Double Moving Average dan Regresi Linear","authors":"Putri Sekar Hamidah, Agustian Suseno, Billy Nugraha","doi":"10.31004/jutin.v7i1.25028","DOIUrl":"https://doi.org/10.31004/jutin.v7i1.25028","url":null,"abstract":"Increasing demand and changing consumer desires over time have triggered the company PT. XYZ to try to fulfill the desires and follow product developments among consumers. This research is research that aims to analyze the production capacity of polyester fiber with several forecasting methods as consideration between the two, namely Double Moving Average and Linear Regression. This research is located at PT. XYZ, in this research only examined the production of polyester fibers. The Double Moving Average method shows that the error rate in the form of Mean Squared Error produces 24,891 polyester fiber items, while the Linear Regression method shows that the error rate in the form of Mean Squared Error produces 594 polyester fiber items. So a comparison between the two forecasting methods shows that the Linear Regression method has the smallest error rate and is the best method for producing polyester fiber for the following months. ","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"5 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140492095","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-27DOI: 10.31004/jutin.v7i1.24873
I. Mustofa, Agus Hindarto Wibowo, Kartinasari Ayuhikmatin Sekarjati, Nafis Sinta Makhulina, R. Dewangga
Data has become the most valuable component to be processed in order to provide usable information in the modern world of rapidly developing technology. When it comes to more in-depth or clear data analysis, technology is quite useful. Real governmental, social, and commercial operations use this technology; in the case of business, this is demonstrated by the quantity of minimarkets operating throughout Indonesia. As a result, it greatly increases commercial competition. Consequently, in order to compete, a study using the available data must be conducted. The Association Rule-Market Basket Analysis method was employed in this study to ascertain the shopping interests of the participants. According to the study's findings, two rules 60% (washing equipment and foodstuffs) and 62% (medicine and bottled drinks) showed the greatest confidence values. Based on these findings, the minimarket can decide what has to be done in terms of Product Bundling, setting up the layout and other tasks
{"title":"Penerapan Association Rule-Market Basket Analysis (AR-MBA) Dalam Menentukan Strategi Product Bundling: Studi Kasus Pada Minimarket AKPRIND MART","authors":"I. Mustofa, Agus Hindarto Wibowo, Kartinasari Ayuhikmatin Sekarjati, Nafis Sinta Makhulina, R. Dewangga","doi":"10.31004/jutin.v7i1.24873","DOIUrl":"https://doi.org/10.31004/jutin.v7i1.24873","url":null,"abstract":"Data has become the most valuable component to be processed in order to provide usable information in the modern world of rapidly developing technology. When it comes to more in-depth or clear data analysis, technology is quite useful. Real governmental, social, and commercial operations use this technology; in the case of business, this is demonstrated by the quantity of minimarkets operating throughout Indonesia. As a result, it greatly increases commercial competition. Consequently, in order to compete, a study using the available data must be conducted. The Association Rule-Market Basket Analysis method was employed in this study to ascertain the shopping interests of the participants. According to the study's findings, two rules 60% (washing equipment and foodstuffs) and 62% (medicine and bottled drinks) showed the greatest confidence values. Based on these findings, the minimarket can decide what has to be done in terms of Product Bundling, setting up the layout and other tasks","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"180 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140492253","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-27DOI: 10.31004/jutin.v7i1.25024
Nur Rochman Dwi Santoso, K. Kusnadi
PT XYZ is a manufacturing company that has facilities to produce a variety of specialized chemicals that are used in various industries. Employees of the Logistics Department at PT. XYZ often have difficulties in completing their tasks according to the scheduled schedule. This situation often makes them work overtime to finish the work that's stacked. The requirement to ensure timely delivery and effective coordination with customers adds to their mental workload. In an attempt to determine the level of mental workload of the logistics department employees, a measurement of the mental labor load was carried out using the NASA TLX method. Based on the results of the measurements obtained, the result of the calculation of the average score of the total staff of the Logistics Department of 66.22 indicates that the classification of the overall mental work load of the employees included in the high level. The most influential indicators of mental workload in this study are mental demand, physical demand, and own performance.
PT XYZ 是一家制造公司，拥有生产各行业使用的各种专用化学品的设施。PT.XYZ 物流部的员工经常难以按照预定计划完成任务。这种情况往往使他们加班加点完成堆积的工作。确保及时交货并与客户进行有效协调的要求也加重了他们的精神负担。为了确定物流部门员工的脑力劳动负荷水平，我们使用 NASA TLX 方法对脑力劳动负荷进行了测量。根据所获得的测量结果，物流部全体员工的平均得分计算结果为 66.22 分，这表明员工的总体脑力劳动负荷属于较高水平。本研究中对脑力劳动负荷影响最大的指标是心理需求、生理需求和自身表现。
{"title":"Analisa Beban Kerja Mental menggunakan Metode NASA TLX pada Departemen Logistik di PT XYZ","authors":"Nur Rochman Dwi Santoso, K. Kusnadi","doi":"10.31004/jutin.v7i1.25024","DOIUrl":"https://doi.org/10.31004/jutin.v7i1.25024","url":null,"abstract":"PT XYZ is a manufacturing company that has facilities to produce a variety of specialized chemicals that are used in various industries. Employees of the Logistics Department at PT. XYZ often have difficulties in completing their tasks according to the scheduled schedule. This situation often makes them work overtime to finish the work that's stacked. The requirement to ensure timely delivery and effective coordination with customers adds to their mental workload. In an attempt to determine the level of mental workload of the logistics department employees, a measurement of the mental labor load was carried out using the NASA TLX method. Based on the results of the measurements obtained, the result of the calculation of the average score of the total staff of the Logistics Department of 66.22 indicates that the classification of the overall mental work load of the employees included in the high level. The most influential indicators of mental workload in this study are mental demand, physical demand, and own performance.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"55 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140492901","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：