Pub Date : 2024-07-10DOI: 10.31004/jutin.v7i3.27694
Ayu Putri Purwani, Eva Safariyani, Muhammad Primasuri Anbiya
PT XYZ is a manufacturing company that produces electronics. During the production process, a significant issue has been identified - a high number of defective products due to dust contamination. This research is designed to analyze the factors contributing to these defects during the visual inspection process, using the Failure Mode and Effect Analysis (FMEA) method. This research can identify the factors causing failure, the severity level, and the probability of negative effects of the failure. Additionally, it allows us to determine the corrective actions or improvements needed to prevent or reduce the risk of product failure during the visual inspection process. The results of the research indicate that the primary cause of the NG dust-type products, based on the highest Risk Priority Number (RPN) value of 320, is operator skills. This factor is a potential cause of the NG dust-type products. Therefore, analysis and simulation of proposed improvements are being conducted, to reduce the number of NG products in the visual inspection process.
PT XYZ 是一家生产电子产品的制造公司。在生产过程中，发现了一个重要问题--由于灰尘污染而导致大量次品。本研究旨在利用故障模式和影响分析法（FMEA），分析在视觉检测过程中造成这些缺陷的因素。这项研究可以确定导致故障的因素、严重程度以及故障造成负面影响的概率。此外，它还能让我们确定所需的纠正措施或改进措施，以防止或降低视觉检测过程中的产品故障风险。研究结果表明，根据最高的风险优先级编号（RPN）值 320，NG 灰尘型产品的主要原因是操作员的技能。这一因素是 NG 粉尘型产品的潜在原因。因此，正在对拟议的改进措施进行分析和模拟，以减少目视检查过程中出现的 NG 产品数量。
{"title":"Analisis Penyebab Produk Defect Jenis Dust di Proses Visual Inspection Menggunakan Metode Failure Mode and Effect Analysis (FMEA)","authors":"Ayu Putri Purwani, Eva Safariyani, Muhammad Primasuri Anbiya","doi":"10.31004/jutin.v7i3.27694","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.27694","url":null,"abstract":"PT XYZ is a manufacturing company that produces electronics. During the production process, a significant issue has been identified - a high number of defective products due to dust contamination. This research is designed to analyze the factors contributing to these defects during the visual inspection process, using the Failure Mode and Effect Analysis (FMEA) method. This research can identify the factors causing failure, the severity level, and the probability of negative effects of the failure. Additionally, it allows us to determine the corrective actions or improvements needed to prevent or reduce the risk of product failure during the visual inspection process. The results of the research indicate that the primary cause of the NG dust-type products, based on the highest Risk Priority Number (RPN) value of 320, is operator skills. This factor is a potential cause of the NG dust-type products. Therefore, analysis and simulation of proposed improvements are being conducted, to reduce the number of NG products in the visual inspection process.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"50 s248","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835365","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-07-10DOI: 10.31004/jutin.v7i3.27698
Fakhrur Rozi, Siti Mundari
UMKM Surya Agung Percussion, located in Kaliwot Hamlet, RT 18, RW 07, Bungah Village, Bungah District, Gresik, is a micro, small, and medium-sized enterprise (UMKM) that produces percussion instruments such as tambourines. The products manufactured by UMKM Surya Agung Percussion include tambourines, hadrahs, marawis, and darbukas. The flagship product of this UMKM is the tambourine. In the production process, UMKM Surya Agung Percussion has a tambourine smoothing machine with a capacity of 50 pieces per day. However, the capacity of the machine is unable to meet the demand for tambourines, which can reach up to 400 pieces per week. Therefore, a study is conducted to observe this phenomenon with the aim of designing a tambourine smoothing tool to increase the production capacity of tambourines and minimize the smoothing process time. The tool is redesigned taking into account the anthropometric aspects of the workers to make it more ergonomic and produce a higher output than before to meet the fluctuating demand for tambourines.
UMKM Surya Agung Percussion 位于格罗西克市 Bungah 区 Bungah 村 RT 18, RW 07 的 Kaliwot 小区，是一家生产手鼓等打击乐器的微型、小型和中型企业（UMKM）。UMKM Surya Agung Percussion 生产的产品包括手鼓、哈德拉、马拉维和达布卡。UMKM 的旗舰产品是手鼓。在生产过程中，UMKM Surya Agung Percussion 拥有一台铃鼓平滑机，每天可生产 50 个铃鼓。然而，该机器的产能无法满足每周高达 400 件的铃鼓需求。因此，我们对这一现象进行了观察研究，目的是设计一种铃鼓磨平工具，以提高铃鼓的生产能力，并最大限度地缩短磨平工序的时间。在重新设计该工具时，考虑到了工人的人体测量方面，使其更符合人体工程学，并能产生比以前更高的产量，以满足对铃鼓的波动性需求。
{"title":"Rancang Ulang Alat Penghalus Rebana untuk Meminimumkan Waktu Proses Penghalusan","authors":"Fakhrur Rozi, Siti Mundari","doi":"10.31004/jutin.v7i3.27698","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.27698","url":null,"abstract":"UMKM Surya Agung Percussion, located in Kaliwot Hamlet, RT 18, RW 07, Bungah Village, Bungah District, Gresik, is a micro, small, and medium-sized enterprise (UMKM) that produces percussion instruments such as tambourines. The products manufactured by UMKM Surya Agung Percussion include tambourines, hadrahs, marawis, and darbukas. The flagship product of this UMKM is the tambourine. In the production process, UMKM Surya Agung Percussion has a tambourine smoothing machine with a capacity of 50 pieces per day. However, the capacity of the machine is unable to meet the demand for tambourines, which can reach up to 400 pieces per week. Therefore, a study is conducted to observe this phenomenon with the aim of designing a tambourine smoothing tool to increase the production capacity of tambourines and minimize the smoothing process time. The tool is redesigned taking into account the anthropometric aspects of the workers to make it more ergonomic and produce a higher output than before to meet the fluctuating demand for tambourines.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"63 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835174","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The HomeDecore furniture industry is a small industry sector that focuses on manufacturing furniture products from wood-based materials. The production process in this furniture involves the process of cutting wood, smoothing wood and the assembly process. This process poses a risk of hazards that result in accidents at work. Broadly speaking, work accidents are caused by two factors, namely human actions that do not meet work safety (unsafe action) and unsafe conditions. The purpose of this research is to identify hazard risks and determine control measures to reduce the risk of work accidents. This research was conducted using the Hazard Identification, Risk Assessment And Determining Control (HIRADC) method to identify hazards, analyze risks and determine risk control measures to ensure the safety of workers. With this research, hopefully it can help reduce the risk of hazards. Based on the results of this study, several recommendations are determined according to the hazard control hierarchy by carrying out control measures such as elimination, substitution, engineering control, administrative and PPE (Personal Protective Equipment.
{"title":"Analisis Risiko Bahaya dengan Metode Hazard Identification, Risk Assessment and Determining Control (HIRADC) pada Industri Kecil Mebel (Studi Kasus : Mebel Homedecore, Driyorejo, Gresik)","authors":"Berliana Safitri, Paramaditya Arismawati, Ayu Endah Wahyuni","doi":"10.31004/jutin.v7i3.29486","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.29486","url":null,"abstract":"The HomeDecore furniture industry is a small industry sector that focuses on manufacturing furniture products from wood-based materials. The production process in this furniture involves the process of cutting wood, smoothing wood and the assembly process. This process poses a risk of hazards that result in accidents at work. Broadly speaking, work accidents are caused by two factors, namely human actions that do not meet work safety (unsafe action) and unsafe conditions. The purpose of this research is to identify hazard risks and determine control measures to reduce the risk of work accidents. This research was conducted using the Hazard Identification, Risk Assessment And Determining Control (HIRADC) method to identify hazards, analyze risks and determine risk control measures to ensure the safety of workers. With this research, hopefully it can help reduce the risk of hazards. Based on the results of this study, several recommendations are determined according to the hazard control hierarchy by carrying out control measures such as elimination, substitution, engineering control, administrative and PPE (Personal Protective Equipment. ","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"16 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835876","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-07-10DOI: 10.31004/jutin.v7i3.28261
M. Jaelani, Risma Fitriani, Muhammad Adi Fatwa
With so many shop businesses in Indonesia, it requires every shop business to be able to compete by providing satisfaction to its consumers. Two of the factors that have a positive influence on consumer satisfaction are product price and product quality. Therefore, the purpose of this study is to test whether product price and product quality have a positive effect on Kedai Mimi consumer satisfaction. This study uses a quantitative approach with validity tests and reliability tests as a measuring tool for research indicators, as well as classical assumption tests, and multiple linear regression assisted by SPSS software to analyze the relationship between the variables studied. The results showed that product prices and product quality had a positive effect on consumer satisfaction at Mimi Shop by 69.2%.
{"title":"Pengaruh Harga Produk dan Kualitas Produk terhadap Kepuasan Pelanggan Kedai Mimi","authors":"M. Jaelani, Risma Fitriani, Muhammad Adi Fatwa","doi":"10.31004/jutin.v7i3.28261","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.28261","url":null,"abstract":"With so many shop businesses in Indonesia, it requires every shop business to be able to compete by providing satisfaction to its consumers. Two of the factors that have a positive influence on consumer satisfaction are product price and product quality. Therefore, the purpose of this study is to test whether product price and product quality have a positive effect on Kedai Mimi consumer satisfaction. This study uses a quantitative approach with validity tests and reliability tests as a measuring tool for research indicators, as well as classical assumption tests, and multiple linear regression assisted by SPSS software to analyze the relationship between the variables studied. The results showed that product prices and product quality had a positive effect on consumer satisfaction at Mimi Shop by 69.2%. ","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"96 10","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835615","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-07-10DOI: 10.31004/jutin.v7i3.30915
Achmad Muzaki, Retno Trimurtiningrum
Earthquakes are natural phenomena caused by natural events. The strength of an earthquake can be measured using a seismometer. The most commonly used scale to measure the strength of an earthquake is the Richter scale. The amount of demage caused by an earthquake is not only determined based on its strength, but is also measured by the area where the earthquake occurs. The depth of an earthquake that occurs from within the earth can also affect the potential damage. Eatrhquakes are located close to the groound surface, so they can have significant destructive properties. Large earthquake can usually trigger aftershocks, so they can be overcome using temporal processes.This research carried out an analysis of story drift and the influence of P-Delta on the reinforced concrete structure of the office building PT. Pupuk Lapan Harsa based on SNI 1726:2019. With the planning concept using the help of SAP2000 software.The results of the analysis of the Gresik fertilizer factory office building were delcared safe with a story drift in the x-axis ( ) in the amount of 10,95 mm up to 31,85, in the y-axis ( ) in the amount of 10,95 mm up to 31,85 mm. Meanwhile, the value of the influence of P-Delta in the x-axis ( ) in the amount of 0,007 up to 0,036, in the y-axis ( ) in the amount of 0,007 up to 0,036. Earthquakes are natural phenomena caused by natural events. The strength of an earthquake can be measured using a seismometer. The most commonly used scale to measure the strength of an earthquake is the Richter scale. The amount of demage caused by an earthquake is not only determined based on its strength, but is also measured by the area where the earthquake occurs. The depth of an earthquake that occurs from within the earth can also affect the potential damage. Eatrhquakes are located close to the groound surface, so they can have significant destructive properties. Large earthquake can usually trigger aftershocks, so they can be overcome using temporal processes.This research carried out an analysis of story drift and the influence of P-Delta on the reinforced concrete structure of the office building PT. Pupuk Lapan Harsa based on SNI 1726:2019. With the planning concept using the help of SAP2000 software.The results of the analysis of the Gresik fertilizer factory office building were delcared safe with a story drift in the x-axis ( ) in the amount of 10,95 mm up to 31,85, in the y-axis ( ) in the amount of 10,95 mm up to 31,85 mm. Meanwhile, the value of the influence of P-Delta in the x-axis ( ) in the amount of 0,007 up to 0,036, in the y-axis ( ) in the amount of 0,007 up to 0,036.
{"title":"Analisis Kinerja Struktur Gedung Perkantoran Pabrik Pupuk Gresik dengan Pembebanan Gempa Berdasarkan SNI 1726:2019 terhadap Simpangan Antar Lantai dan Pengaruh P-Delta","authors":"Achmad Muzaki, Retno Trimurtiningrum","doi":"10.31004/jutin.v7i3.30915","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.30915","url":null,"abstract":"Earthquakes are natural phenomena caused by natural events. The strength of an earthquake can be measured using a seismometer. The most commonly used scale to measure the strength of an earthquake is the Richter scale. The amount of demage caused by an earthquake is not only determined based on its strength, but is also measured by the area where the earthquake occurs. The depth of an earthquake that occurs from within the earth can also affect the potential damage. Eatrhquakes are located close to the groound surface, so they can have significant destructive properties. Large earthquake can usually trigger aftershocks, so they can be overcome using temporal processes.This research carried out an analysis of story drift and the influence of P-Delta on the reinforced concrete structure of the office building PT. Pupuk Lapan Harsa based on SNI 1726:2019. With the planning concept using the help of SAP2000 software.The results of the analysis of the Gresik fertilizer factory office building were delcared safe with a story drift in the x-axis ( ) in the amount of 10,95 mm up to 31,85, in the y-axis ( ) in the amount of 10,95 mm up to 31,85 mm. Meanwhile, the value of the influence of P-Delta in the x-axis ( ) in the amount of 0,007 up to 0,036, in the y-axis ( ) in the amount of 0,007 up to 0,036.\u0000Earthquakes are natural phenomena caused by natural events. The strength of an earthquake can be measured using a seismometer. The most commonly used scale to measure the strength of an earthquake is the Richter scale. The amount of demage caused by an earthquake is not only determined based on its strength, but is also measured by the area where the earthquake occurs. The depth of an earthquake that occurs from within the earth can also affect the potential damage. Eatrhquakes are located close to the groound surface, so they can have significant destructive properties. Large earthquake can usually trigger aftershocks, so they can be overcome using temporal processes.This research carried out an analysis of story drift and the influence of P-Delta on the reinforced concrete structure of the office building PT. Pupuk Lapan Harsa based on SNI 1726:2019. With the planning concept using the help of SAP2000 software.The results of the analysis of the Gresik fertilizer factory office building were delcared safe with a story drift in the x-axis ( ) in the amount of 10,95 mm up to 31,85, in the y-axis ( ) in the amount of 10,95 mm up to 31,85 mm. Meanwhile, the value of the influence of P-Delta in the x-axis ( ) in the amount of 0,007 up to 0,036, in the y-axis ( ) in the amount of 0,007 up to 0,036.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"105 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835658","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-07-10DOI: 10.31004/jutin.v7i3.30682
Raygalan Kalmas Surya, Apid Hapid Maksum
The performance of the industrial system in producing goods will be very important for business continuity, such as meeting consumer demand so that it can maintain the sustainability and/or continuity of the company in order to survive. Currently, companies will always be required to maintain and improve their competitive capabilities, so one way to do this is by increasing productivity at all levels within the company. The author tries to identify the work process of PT. Raja Ampat Indotim in the production of Compost Chopper Machines due to the results of interviews conducted at the company, there were no procedures for the work process in producing Compost Chopper Machines, so on this occasion the author intends to design a standard work process in the production of compost chopper machines at PT. Raja Ampat Indotim. Data processing in this research was carried out using an Operation Process Map. Based on the operational process map that has been created, the time required to produce a Compost Shredding Machine is 968.29 minutes.
{"title":"Desain Proses Produksi dalam Proyek Pembuatan Mesin Pencacah Kompos pada Kegiatan di PT Raja Ampat Indotim","authors":"Raygalan Kalmas Surya, Apid Hapid Maksum","doi":"10.31004/jutin.v7i3.30682","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.30682","url":null,"abstract":"The performance of the industrial system in producing goods will be very important for business continuity, such as meeting consumer demand so that it can maintain the sustainability and/or continuity of the company in order to survive. Currently, companies will always be required to maintain and improve their competitive capabilities, so one way to do this is by increasing productivity at all levels within the company. The author tries to identify the work process of PT. Raja Ampat Indotim in the production of Compost Chopper Machines due to the results of interviews conducted at the company, there were no procedures for the work process in producing Compost Chopper Machines, so on this occasion the author intends to design a standard work process in the production of compost chopper machines at PT. Raja Ampat Indotim. Data processing in this research was carried out using an Operation Process Map. Based on the operational process map that has been created, the time required to produce a Compost Shredding Machine is 968.29 minutes.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"74 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835701","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-07-10DOI: 10.31004/jutin.v7i3.30836
P. Wibowo, Meylindha Putri Arofah
There are many gapit industries in Cirebon area and each of these companies has a different business development strategy in dealing with change. One of them is the gapit 24 industry, where in the last few months product sales have been unstable and even tended to decline which is influenced by various factors so that it requires the right strategy to be able to maintain its business. This study aims to analyze the business development strategy of gapit 24 in Cirebon through the identification of internal and external factors. The data analysis method used is descriptive qualitative and quantitative with data collection techniques through observation, interviews, questionnaires, and literature study. Matrix analysis of IFAS and EFAS yielded 16 factors with the position of the gapit 24 business in quadrant I with an aggressive strategy and utilizing the S-O strategy. From the results of the SWOT matrix analysis, 5 alternatives are used in the S-O strategy according to business position. Data processing using the TOPSIS method obtained successive strategic priorities, alternative strategy 1, namely strengthening relationships with consumers, alternative 2, namely improve the quality of products and services, alternative 3, namely continue to innovate to introduce new products, alternative 4, namely expanding the product distribution network and alternative 5, namely identify potential business partners.
{"title":"Analisis SWOT dan Technique For Order Preference by Similarity to Ideal Solution (TOPSIS) untuk Strategi Pengembangan Usaha di Gapit 24","authors":"P. Wibowo, Meylindha Putri Arofah","doi":"10.31004/jutin.v7i3.30836","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.30836","url":null,"abstract":"There are many gapit industries in Cirebon area and each of these companies has a different business development strategy in dealing with change. One of them is the gapit 24 industry, where in the last few months product sales have been unstable and even tended to decline which is influenced by various factors so that it requires the right strategy to be able to maintain its business. This study aims to analyze the business development strategy of gapit 24 in Cirebon through the identification of internal and external factors. The data analysis method used is descriptive qualitative and quantitative with data collection techniques through observation, interviews, questionnaires, and literature study. Matrix analysis of IFAS and EFAS yielded 16 factors with the position of the gapit 24 business in quadrant I with an aggressive strategy and utilizing the S-O strategy. From the results of the SWOT matrix analysis, 5 alternatives are used in the S-O strategy according to business position. Data processing using the TOPSIS method obtained successive strategic priorities, alternative strategy 1, namely strengthening relationships with consumers, alternative 2, namely improve the quality of products and services, alternative 3, namely continue to innovate to introduce new products, alternative 4, namely expanding the product distribution network and alternative 5, namely identify potential business partners.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"70 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835157","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-07-10DOI: 10.31004/jutin.v7i3.30829
Muhammad Fauzan Firdaus, Akhsani Nur Amalia, Agung Widarman
CV. PQR is a company operating in the printing sector. The main printing produced at the company is labels for vegetable products. When producing labels, the company always strives to produce quality products that reach consumers on time. In order for the production process to run, good production scheduling is needed. This research aims to schedule label production on CV. PQR. The label production scheduling method used is Palmer. The results of production scheduling calculations using the Palmer method have a job sequence of 10-9-8-7-6-4-5-3-2-1 and produce a makespan value of 248740 seconds or 69.0944 hours and require 8.6368 days to complete everything. jobs. There is a time difference between the company's initial condition production scheduling and production scheduling using the Palmer method, namely 13160 seconds or 3.6556 hours or 0.45695 days. So the Palmer method can minimize delivery delays
{"title":"Penjadwalan Produksi Label Menggunakan Metode Palmer untuk Meminimasi Makespan di CV. PQR","authors":"Muhammad Fauzan Firdaus, Akhsani Nur Amalia, Agung Widarman","doi":"10.31004/jutin.v7i3.30829","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.30829","url":null,"abstract":"CV. PQR is a company operating in the printing sector. The main printing produced at the company is labels for vegetable products. When producing labels, the company always strives to produce quality products that reach consumers on time. In order for the production process to run, good production scheduling is needed. This research aims to schedule label production on CV. PQR. The label production scheduling method used is Palmer. The results of production scheduling calculations using the Palmer method have a job sequence of 10-9-8-7-6-4-5-3-2-1 and produce a makespan value of 248740 seconds or 69.0944 hours and require 8.6368 days to complete everything. jobs. There is a time difference between the company's initial condition production scheduling and production scheduling using the Palmer method, namely 13160 seconds or 3.6556 hours or 0.45695 days. So the Palmer method can minimize delivery delays","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"94 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835683","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-07-10DOI: 10.31004/jutin.v7i3.30395
Sugiantoro Sugiantoro, M. Sunaryo, Rosita Putri Sunaryani, Ilmi Tri Nurani, I. Reynaldi
Occupational Safety and Health (K3) is very important for all workers and company owners to prevent occupational accidents and occupational diseases (PAK). UD. Radalla Collection, which manufactures screen printing and children's clothing, involves repeated use of the hands in a long sitting position, which increases the risk of PAK such as musculoskeletal disorders. Socialization is needed to educate craftsmen about the dangers and risks of ergonomics. Previously, a subjective survey had been conducted to identify complaints of Musculoskeletal Disorders (MSDs). From the observation results, it was found that workers did not know about skeletal muscle movement disorders, so workers worked carelessly. UD workers. The Radalla Collection is expected to increase awareness and understanding of the importance of preventing skeletal muscle disorders (gotrak) to avoid accidents and occupational diseases.
{"title":"Analisis Tingkat Pengetahuan Berdasarkan Keluhan Pekerja Terhadap Gangguan Gerak Otot Kerangka (Gotrak) Pada UD. Radalla Collection","authors":"Sugiantoro Sugiantoro, M. Sunaryo, Rosita Putri Sunaryani, Ilmi Tri Nurani, I. Reynaldi","doi":"10.31004/jutin.v7i3.30395","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.30395","url":null,"abstract":"Occupational Safety and Health (K3) is very important for all workers and company owners to prevent occupational accidents and occupational diseases (PAK). UD. Radalla Collection, which manufactures screen printing and children's clothing, involves repeated use of the hands in a long sitting position, which increases the risk of PAK such as musculoskeletal disorders. Socialization is needed to educate craftsmen about the dangers and risks of ergonomics. Previously, a subjective survey had been conducted to identify complaints of Musculoskeletal Disorders (MSDs). From the observation results, it was found that workers did not know about skeletal muscle movement disorders, so workers worked carelessly. UD workers. The Radalla Collection is expected to increase awareness and understanding of the importance of preventing skeletal muscle disorders (gotrak) to avoid accidents and occupational diseases.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"102 s1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835581","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-07-10DOI: 10.31004/jutin.v7i3.28511
R. Wulandari, Apid Hapid Maksum
PT XYZ merupakan perusahaan engineering yang bergerak di bidang fabriation, machining, dan part stamping. Salah satu material yang paling sering dipesan adalah besi hollow, karena permintaan dari customer cukup banyak. Penelitian ini bertujuan untuk mengetahui pemilihan supplier material besi hollow tersebut. Metode yang digunakan yaitu Analytical Hierarchy Process (AHP) dengan pertimbangan 4 kriteria, di antaranya kualitas, harga, metode pembayaran, dan waktu pengiriman. Terdapat 3 alternatif supplier di PT XYZ, yaitu PT. A, PT. B, dan PT. C. Pengambilan data melalui observasi dan wawancara secara langsung dengan departemen Purchasing di PT XYZ. Hasil penelitian menyatakan bahwa kriteria paling berpengaruh adalah kualitas dengan persentase 47,3 %, dan alternatif supplier yang terpilih adalah PT. A dengan nilai bobot sebesar 0,694. Rekomendasi untuk perusahaan dapat membuat schedule kedatangan material dan memastikan kembali kepada supplier mengenai waktu tepatnya material datang untuk menghindari risiko keterlambatan waktu pengiriman, melihat rendahnya bobot kriteria waktu pengiriman pada supplier yang terpilih.
{"title":"Pemilihan Supplier Material Besi Hollow dengan Metode Analytical Hierarchy Process (AHP) di PT XYZ","authors":"R. Wulandari, Apid Hapid Maksum","doi":"10.31004/jutin.v7i3.28511","DOIUrl":"https://doi.org/10.31004/jutin.v7i3.28511","url":null,"abstract":"PT XYZ merupakan perusahaan engineering yang bergerak di bidang fabriation, machining, dan part stamping. Salah satu material yang paling sering dipesan adalah besi hollow, karena permintaan dari customer cukup banyak. Penelitian ini bertujuan untuk mengetahui pemilihan supplier material besi hollow tersebut. Metode yang digunakan yaitu Analytical Hierarchy Process (AHP) dengan pertimbangan 4 kriteria, di antaranya kualitas, harga, metode pembayaran, dan waktu pengiriman. Terdapat 3 alternatif supplier di PT XYZ, yaitu PT. A, PT. B, dan PT. C. Pengambilan data melalui observasi dan wawancara secara langsung dengan departemen Purchasing di PT XYZ. Hasil penelitian menyatakan bahwa kriteria paling berpengaruh adalah kualitas dengan persentase 47,3 %, dan alternatif supplier yang terpilih adalah PT. A dengan nilai bobot sebesar 0,694. Rekomendasi untuk perusahaan dapat membuat schedule kedatangan material dan memastikan kembali kepada supplier mengenai waktu tepatnya material datang untuk menghindari risiko keterlambatan waktu pengiriman, melihat rendahnya bobot kriteria waktu pengiriman pada supplier yang terpilih.","PeriodicalId":17759,"journal":{"name":"Jurnal Teknik Industri Terintegrasi","volume":"21 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141835813","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：