Sensor Review最新文献

Purpose

This study aims to improve detection efficiency of fluorescence biosensor or a graphene field-effect transistor biosensor. Graphene field-effect transistor biosensing and fluorescent biosensing were integrated and combined with magnetic nanoparticles to construct a multi-sensor integrated microfluidic biochip for detecting single-stranded DNA. Multi-sensor integrated biochip demonstrated higher detection reliability for a single target and could simultaneously detect different targets.

Design/methodology/approach

In this study, the authors integrated graphene field-effect transistor biosensing and fluorescent biosensing, combined with magnetic nanoparticles, to fabricate a multi-sensor integrated microfluidic biochip for the detection of single-stranded deoxyribonucleic acid (DNA). Graphene films synthesized through chemical vapor deposition were transferred onto a glass substrate featuring two indium tin oxide electrodes, thus establishing conductive channels for the graphene field-effect transistor. Using π-π stacking, 1-pyrenebutanoic acid succinimidyl ester was immobilized onto the graphene film to serve as a medium for anchoring the probe aptamer. The fluorophore-labeled target DNA subsequently underwent hybridization with the probe aptamer, thereby forming a fluorescence detection channel.

Findings

This paper presents a novel approach using three channels of light, electricity and magnetism for the detection of single-stranded DNA, accompanied by the design of a microfluidic detection platform integrating biosensor chips. Remarkably, the detection limit achieved is 10 pm, with an impressively low relative standard deviation of 1.007%.

Originality/value

By detecting target DNA, the photo-electro-magnetic multi-sensor graphene field-effect transistor biosensor not only enhances the reliability and efficiency of detection but also exhibits additional advantages such as compact size, affordability, portability and straightforward automation. Real-time display of detection outcomes on the host facilitates a deeper comprehension of biochemical reaction dynamics. Moreover, besides detecting the same target, the sensor can also identify diverse targets, primarily leveraging the penetrative and noninvasive nature of light.

Purpose

This paper aims to explore recent advances in drift compensation algorithms for Electronic Nose (E-nose) technology and addresses sensor drift challenges through offline, online and neural network-based strategies. It offers a comprehensive review and covers causes of drift, compensation methods and future directions. This synthesis provides insights for enhancing the reliability and effectiveness of E-nose systems in drift issues.

Design/methodology/approach

The article adopts a comprehensive approach and systematically explores the causes of sensor drift in E-nose systems and proposes various compensation strategies. It covers both offline and online compensation methods, as well as neural network-based approaches, and provides a holistic view of the available techniques.

Findings

The article provides a comprehensive overview of drift compensation algorithms for E-nose technology and consolidates recent research insights. It addresses challenges like sensor calibration and algorithm complexity, while discussing future directions. Readers gain an understanding of the current state-of-the-art and emerging trends in electronic olfaction.

Originality/value

This article presents a comprehensive review of the latest advancements in drift compensation algorithms for electronic nose technology and covers the causes of drift, offline drift compensation algorithms, online drift compensation algorithms and neural network drift compensation algorithms. The article also summarizes and discusses the current challenges and future directions of drift compensation algorithms in electronic nose systems.

Purpose

Step length is a key factor for pedestrian dead reckoning (PDR), which affects positioning accuracy and reliability. Traditional methods are difficult to handle step length estimation of dynamic gait, which have larger error and are not adapted to real walking. This paper aims to propose a step length estimation method based on frequency domain feature analysis and gait recognition for PDR, which considers the effects of real-time gait.

Design/methodology/approach

The new step length estimation method transformed the acceleration of pedestrians from time domain to frequency domain, and gait characteristics of pedestrians were obtained and matched with different walking speeds.

Findings

Many experiments are conducted and compared with Weinberg and Kim models, and the results show that the average errors of the new method were improved by about 2 meters to 5 meters. It also shows that the proposed method has strong stability and device robustness and meets the accuracy requirements of positioning.

Originality/value

A sliding window strategy used in fast Fourier transform is proposed to implement frequency domain analysis of the acceleration, and a fast adaptive gait recognition mechanism is proposed to identify gait of pedestrians.

Purpose

Ascorbic acid, a water-soluble antioxidant, is an essential component of the human diet and is known for its potent antioxidant properties against several diseases. In recent years, there has been increasing interest in the development of nonenzymatic sensors due to their simplicity, efficiency and excellent selectivity. The aim of this study is to present a selective and sensitive method for the detection of ascorbic acid in aqueous system using a new electrochemical non-enzymatic sensor based on a gold nanoparticles Au-NPs-1,3-di(4-bromophényl)-5-tert-butyl-1,3,5-triazinane (DBTTA) composite.

Design/methodology/approach

Using the square wave voltammetry (SWV) technique, a series of Au-NPs-DBTTA composites were successfully developed and investigated. First, DBTTA was synthesized via the condensation of tert-butylamine and a4-bromoaniline. The structure obtained was identified by IR, 1H NMR and 13C NMR analysis. A glassy carbon electrode (GCE) was modified with 10–1 M DBTTA dissolved in an aqueous solution by cyclic voltammetry in the potential range of 1–1.4 V. Au-NPs were then deposited on the DBTTA/GCE by a chronoamperometric technique. SWV was used to study the electrochemical behavior of the modified electrode (DBTTA/Au-NPs/GCEs). To observe the effect of nanoparticles, ascorbic acid in a buffer solution was analyzed by SWV at the modified electrode with and without gold nanoparticles (Au-NPs).

Findings

The DBTTA/Au-NPs/GCE showed better electroanalytical results. The detection limit of 10–5 M was obtained and the electrode was proportional to the logarithm of the AA concentration in the range of 5 × 10⁻³ M to 1 × 10⁻¹ with very good correlation parameters.

Originality/value

It was also found that the elaborated sensor exhibited reproducibility and excellent selectivity against interfering molecules such as uric acid, aspartic acid and glucose. The proposed sensor was tested for the recognition of AA in orange, and satisfactory results were obtained.

Purpose

The effect of viscosity on the performance of disk-shaped electromechanical resonators has been studied and investigated in the past. The vibration frequency of a disk-shaped resonator changes according to the viscosity of the liquid which the resonator is in contact with. Therefore, the purpose of this paper is based on design a sensor for measuring the viscosity of liquids using a disk-shaped electromechanical resonator. The viscosity of liquids is of interest to researchers in industry and medicine.

Design/methodology/approach

In this paper, a viscosity sensor for liquids is proposed, which is designed based on a disk-shaped electromechanical resonator. In this proposed sensor, two comb drives are used as electrostatic actuators to stimulate the resonator. Also, two other comb drives are used as electrostatic sensors to monitor the frequency changes of the proposed resonator. The resonance frequency of the resonator in response to different fluids under test varies according to their viscosity.

Findings

After calibration of the proposed sensor by nonlinear weights, the viscosity of some liquids are calculated using this sensor and results confirm its accuracy according to the liquids real viscosity.

Originality/value

The design of the proposed sensor and its simulated performance are reported. Also, the viscosity of several different liquids are evaluated with simulations of the proposed sensor and presented.

Purpose

In the measurement of liquid density and viscosity, the change of resonance parameters due to the parasitic parallel capacitance of resonator affects the measurement accuracy. To improve the accuracy, a method was proposed to compensate the parasitic parallel capacitance of resonator by adding an electrode.

Design/methodology/approach

The new electrode (compensation electrode) was added into resonant sensor to make compensation capacitance. The closer the compensation capacitance was to the parasitic parallel capacitance, the better compensation was. The structural parameters of resonant sensor with the compensation electrode were determined by the simulation and experiment.

Findings

The effect of this method was examined by the experiment. The relative errors of density and viscosity were less than 0.15, 0.5 % and standard deviations were less than 0.0004 g/cm³ and 0.005 mPas, respectively.

Practical implications

The experimental results show that this method is valuable for the parasitic parallel capacitance compensation of immersed resonant sensor.

Originality/value

This paper has not been published in other journals.

Purpose

The purpose of this study is to design a highly integrated smart glove to enable gesture acquisition and force sensory interactions, and to enhance the realism and immersion of virtual reality interaction experiences.

Design/methodology/approach

The smart glove is highly integrated with gesture sensing, force-haptic acquisition and virtual force feedback modules. Gesture sensing realizes the interactive display of hand posture. The force-haptic acquisition and virtual force feedback provide immersive force feedback to enhance the sense of presence and immersion of the virtual reality interaction.

Findings

The experimental results show that the average error of the finger bending sensor is only 0.176°, the error of the arm sensor is close to 0 and the maximum error of the force sensing is 2.08 g, which is able to accurately sense the hand posture and force-touch information. In the virtual reality interaction experiments, the force feedback has obvious level distinction, which can enhance the sense of presence and immersion during the interaction.

Originality/value

This paper innovatively proposes a highly integrated smart glove that cleverly integrates gesture acquisition, force-haptic acquisition and virtual force feedback. The glove enhances the sense of presence and immersion of virtual reality interaction through precise force feedback, which has great potential for application in virtual environment interaction in various fields.

Purpose

This work measures the performance characteristics of a hemispherical resonator gyroscope (HRG) and compares it with a numerical model.

Design/methodology/approach

This work we explore the optical and piezoelectric measurement methods to determine the resonant frequency of HRG. These experimental results are compared with their numerically obtained values. To explore the performance characteristics, the effect of varying actuation voltages on the sense mode displacement and the piezoelectric sensor output was studied in the absence of input angular rate. The structure was then subjected to range of angular rate signals, at a constant actuation voltage and the corresponding sensor response was analysed.

Findings

Experimental values of the resonant frequencies in drive and sense modes are found to be within 8% of the numerical results. The sensor output depicts a quadratic dependency on the applied angular rate, which is synchronous with the governing equations of the HRG. The experimental output is within 12% of that obtained numerically. The sensor is found to resolve upto 0.24 rad/s.

Originality/value

This work presents an in-house developed inexpensive measurement setup for static and dynamic characterization of mesoscale MEMS gyroscopes. The measurement setup can also be modified accordingly for measurement of other MEMS-based devices.

Purpose

This study aims to develop an electrochemical sensor for the detection of benzophenone (BP) as an alternative to conventional techniques that are known, expensive, complex and less sensitive.

Design/methodology/approach

The developed sensor is a platinum electrode modified with a plasticized polymer film based on ß-cyclodextrin, using PVC as the polymer, PEG as the plasticizer and ß-CD as the ionophore. This sensor is characterized by various techniques, such as optical microscopy, scanning electron microscopy and cyclic voltammetry. This latter is also used for analyzing kinetic processes at the electrode/electrolyte interface and to evaluate the selectivity and sensitivity of the sensor.

Findings

The results highlight the performance of our sensor. In fact, it exhibits a linear response extending from 10⁻¹⁹ to 10⁻¹³ M, with a correlation coefficient of 0.9836. What is more, it has an excellent detection limit of 10⁻¹⁹ M and a good sensitivity of 21.24 µA/M.

Originality/value

The results of this investigation demonstrated that the developed sensor is an analytical tool of choice for the monitoring of BP in the aqueous phase. The suggested sensor is fast, simple, reproducible and inexpensive.