Pub Date : 2010-12-10DOI: 10.1109/ICEEE.2010.5660461
Zhiliang Wang, Yongshan Zhang
The studying history and present situation of chaos optimization algorithm is summarized and the basic steps of this method are introduced.A new,feasible chaos optimization is presented to nonlinear constrained programming problems. Computing results in an instance show that this algorithm is reliable and applicable to almost all of the problems in multidimensional, nonlinear,complex constrained programming.This algorithm is liable to be applied and mastered.
{"title":"Application of Chaos Optimization Algorithm to Nonlinear Constrained Programming","authors":"Zhiliang Wang, Yongshan Zhang","doi":"10.1109/ICEEE.2010.5660461","DOIUrl":"https://doi.org/10.1109/ICEEE.2010.5660461","url":null,"abstract":"The studying history and present situation of chaos optimization algorithm is summarized and the basic steps of this method are introduced.A new,feasible chaos optimization is presented to nonlinear constrained programming problems. Computing results in an instance show that this algorithm is reliable and applicable to almost all of the problems in multidimensional, nonlinear,complex constrained programming.This algorithm is liable to be applied and mastered.","PeriodicalId":6302,"journal":{"name":"2010 International Conference on E-Product E-Service and E-Entertainment","volume":"6 1","pages":"1-4"},"PeriodicalIF":0.0,"publicationDate":"2010-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86844988","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-12-10DOI: 10.1109/ICEEE.2010.5661257
B. Sun
In this paper is presented the structure and working principle of the cascaded H-bridge multilevel converter with PWM rectifier and phase-shift transformer. Using the leak inductance as the filter reactor of the PWM rectifier can reducing the volume and cost of the converter; the phase-shift secondary side of the transformer can eliminate the current harmonics caused by the single power unit, restraining the grid side harmonic especially the low order harmonic. In the control scheme PLL is employed to track the grid voltage's phase and frequency. The PIR control strategy of the PWM rectifier is to maintain the DC-link voltage stable when feeding the single-phase inverter. In this paper is introduced the mathematic model of the PWM rectifier, its control method and the PIR current control strategy. The waveforms and their spectrums are analyzed through experiments on a prototype testbed. The experiment results verify that the converter can achieve the regenerative ability when operating in the accelerating and decelerating of electrical machines and have a great value in industrial applications.
{"title":"High Voltage Regenerative Converter and the Control of Its PWM Rectifier","authors":"B. Sun","doi":"10.1109/ICEEE.2010.5661257","DOIUrl":"https://doi.org/10.1109/ICEEE.2010.5661257","url":null,"abstract":"In this paper is presented the structure and working principle of the cascaded H-bridge multilevel converter with PWM rectifier and phase-shift transformer. Using the leak inductance as the filter reactor of the PWM rectifier can reducing the volume and cost of the converter; the phase-shift secondary side of the transformer can eliminate the current harmonics caused by the single power unit, restraining the grid side harmonic especially the low order harmonic. In the control scheme PLL is employed to track the grid voltage's phase and frequency. The PIR control strategy of the PWM rectifier is to maintain the DC-link voltage stable when feeding the single-phase inverter. In this paper is introduced the mathematic model of the PWM rectifier, its control method and the PIR current control strategy. The waveforms and their spectrums are analyzed through experiments on a prototype testbed. The experiment results verify that the converter can achieve the regenerative ability when operating in the accelerating and decelerating of electrical machines and have a great value in industrial applications.","PeriodicalId":6302,"journal":{"name":"2010 International Conference on E-Product E-Service and E-Entertainment","volume":"34 1","pages":"1-4"},"PeriodicalIF":0.0,"publicationDate":"2010-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87141647","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-12-10DOI: 10.1109/ICEEE.2010.5660955
Yan Dai, Y. Zhong, Kewei Liu, Y. Mo
In order to solve the problem of sharing and delivering the information during the designing, the manufacturing and the measuring periods, the ISO proposed the Geometrical Production Specification and verification (GPS) standards. This paper establishes an ontology for the geometrical features information of linear dimensions in the general GPS matrix. Firstly, the classes, their attributions, and constraint relations about the linear dimensions in the general GPS matrix are designed. And information ontology of linear dimensions is built by making use of natural language and OWL. And then the ontology is translated to TBox, which is the terminology set of description logic (DL) and introduces the vocabulary of the linear dimensional domain. At the same time, the ABox is constructed, which contains assertions about named individuals in terms of this vocabulary and takes a simple package part as an example. Finally, ontology is edited with OWL language on the platform named Protege. The owl file generated consists of the characteristic information of linear dimension, which is the preparation work of geometrical specification and verification.
{"title":"Ontology Construction on Feature Characteristic of Linear Dimension about Geometrical Production Specification","authors":"Yan Dai, Y. Zhong, Kewei Liu, Y. Mo","doi":"10.1109/ICEEE.2010.5660955","DOIUrl":"https://doi.org/10.1109/ICEEE.2010.5660955","url":null,"abstract":"In order to solve the problem of sharing and delivering the information during the designing, the manufacturing and the measuring periods, the ISO proposed the Geometrical Production Specification and verification (GPS) standards. This paper establishes an ontology for the geometrical features information of linear dimensions in the general GPS matrix. Firstly, the classes, their attributions, and constraint relations about the linear dimensions in the general GPS matrix are designed. And information ontology of linear dimensions is built by making use of natural language and OWL. And then the ontology is translated to TBox, which is the terminology set of description logic (DL) and introduces the vocabulary of the linear dimensional domain. At the same time, the ABox is constructed, which contains assertions about named individuals in terms of this vocabulary and takes a simple package part as an example. Finally, ontology is edited with OWL language on the platform named Protege. The owl file generated consists of the characteristic information of linear dimension, which is the preparation work of geometrical specification and verification.","PeriodicalId":6302,"journal":{"name":"2010 International Conference on E-Product E-Service and E-Entertainment","volume":"251 1","pages":"1-4"},"PeriodicalIF":0.0,"publicationDate":"2010-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87563780","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-12-10DOI: 10.1109/ICEEE.2010.5660928
Hongying Wang
Under the oil system reform background, this has studied the effective method to transform the traditional mode of supplies into the modern logistics enterprises within the oil industry and summerized the only way to the modern logistics enterprises ---- process recycling . The process recycling has been an inevitable way within the oil industry for logistics Resource Integration and realization of strategy. On the basis the enterprise will walk up the successful road to market-oriented modern logistics enterprise which makes it the ultimate objective to meet customer requirements , and realize the strategy of the enterprise.
{"title":"Oil Logistics Enterprises Are to Realize the Business Process Recycling Based on the Strategy","authors":"Hongying Wang","doi":"10.1109/ICEEE.2010.5660928","DOIUrl":"https://doi.org/10.1109/ICEEE.2010.5660928","url":null,"abstract":"Under the oil system reform background, this has studied the effective method to transform the traditional mode of supplies into the modern logistics enterprises within the oil industry and summerized the only way to the modern logistics enterprises ---- process recycling . The process recycling has been an inevitable way within the oil industry for logistics Resource Integration and realization of strategy. On the basis the enterprise will walk up the successful road to market-oriented modern logistics enterprise which makes it the ultimate objective to meet customer requirements , and realize the strategy of the enterprise.","PeriodicalId":6302,"journal":{"name":"2010 International Conference on E-Product E-Service and E-Entertainment","volume":"2013 1","pages":"1-4"},"PeriodicalIF":0.0,"publicationDate":"2010-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88125049","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-12-10DOI: 10.1109/ICEEE.2010.5660869
Zheng Gong, Tian Yu
Web text classification is the process of determine the text types automatically under a given classification, according to the text content. Web text categorization system is the use of machine learning, knowledge engineering and other related fields of knowledge, access to the web on the text, after text preprocessing, Chinese word segmentation and training classifier, using classification algorithm to implement automatic classification. This paper designed a web of Chinese text categorization system model and system tested, experimental results show that the classification system of the web text categorization with two main characteristics which are efficiency and accuracy.
{"title":"Chinese Web Text Classification System Model Based on Naive Bayes","authors":"Zheng Gong, Tian Yu","doi":"10.1109/ICEEE.2010.5660869","DOIUrl":"https://doi.org/10.1109/ICEEE.2010.5660869","url":null,"abstract":"Web text classification is the process of determine the text types automatically under a given classification, according to the text content. Web text categorization system is the use of machine learning, knowledge engineering and other related fields of knowledge, access to the web on the text, after text preprocessing, Chinese word segmentation and training classifier, using classification algorithm to implement automatic classification. This paper designed a web of Chinese text categorization system model and system tested, experimental results show that the classification system of the web text categorization with two main characteristics which are efficiency and accuracy.","PeriodicalId":6302,"journal":{"name":"2010 International Conference on E-Product E-Service and E-Entertainment","volume":"8 1","pages":"1-4"},"PeriodicalIF":0.0,"publicationDate":"2010-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88276363","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-12-10DOI: 10.1109/ICEEE.2010.5660489
Junlian He, Mingtian Li
A cellular automata method is an efficient method that can simulate the process of self-organization of the complex system by constructing some simple local rules, which is fit to study material failure. In order to make full use of the advantages of cellular automata such as its intrinsic parallelism, localization and so on cellular automata model were presented to study the failure process of the quasi-brittle materials. The quasi-brittle materials can be divided into cell elements that are connected with beam elements. Displacements components are taken as the basic state. Based on the equilibrium equations and deformation equations local rules can be attained, which can update the states of the cells. Maximum tensile strain criterion and Mohr-Coulomb criterion are applied to judge the beginning of tensile failure and shearing failure. And based on damage mechanics deformation and strength properties of the damaged cell elements are estimated. Based on the cellular automata model the failure process of the quasi-brittle materials is studied. Split test is usually used to test the tensile strength of the quasi-brittle materials such as concrete and rock indirectly because of the difficulty of direct tension test. In order to understand the failure mechanisms of split test theoretical analysis, cellular automata simulation and experiments are used to analyze the split process. The research results show that split failure of the quasi-brittle materials is caused by tensile failure and cellular automata can simulate the split process of the quasi-brittle materials.
{"title":"Cellular Automata to Simulate Split of Quasi-Brittle Materials","authors":"Junlian He, Mingtian Li","doi":"10.1109/ICEEE.2010.5660489","DOIUrl":"https://doi.org/10.1109/ICEEE.2010.5660489","url":null,"abstract":"A cellular automata method is an efficient method that can simulate the process of self-organization of the complex system by constructing some simple local rules, which is fit to study material failure. In order to make full use of the advantages of cellular automata such as its intrinsic parallelism, localization and so on cellular automata model were presented to study the failure process of the quasi-brittle materials. The quasi-brittle materials can be divided into cell elements that are connected with beam elements. Displacements components are taken as the basic state. Based on the equilibrium equations and deformation equations local rules can be attained, which can update the states of the cells. Maximum tensile strain criterion and Mohr-Coulomb criterion are applied to judge the beginning of tensile failure and shearing failure. And based on damage mechanics deformation and strength properties of the damaged cell elements are estimated. Based on the cellular automata model the failure process of the quasi-brittle materials is studied. Split test is usually used to test the tensile strength of the quasi-brittle materials such as concrete and rock indirectly because of the difficulty of direct tension test. In order to understand the failure mechanisms of split test theoretical analysis, cellular automata simulation and experiments are used to analyze the split process. The research results show that split failure of the quasi-brittle materials is caused by tensile failure and cellular automata can simulate the split process of the quasi-brittle materials.","PeriodicalId":6302,"journal":{"name":"2010 International Conference on E-Product E-Service and E-Entertainment","volume":"10 1","pages":"1-4"},"PeriodicalIF":0.0,"publicationDate":"2010-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88398773","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-12-10DOI: 10.1109/ICEEE.2010.5661169
F. Fang, Hong-huai Wei, Jinsong Guo, Dong-ru Guo, L. Dong
To explore the feasibility of ORP as the control parameter of one-stage completely autotrophic nitrogen removal system, this test studied the synthetic low C/N waste water, analyzed the correlation between the variation rule of concentration of ORP and the transfer of nitrogen compounds in system under different concentrations of DO. Results indicated that the ORP curve emerged a turning point when transfer of ammonium finished under the conditions of DO concentrations were 2.0 mg/L and 1.5mg/L respectively, later the rise speed slowed down, at this point TN removal rates were 69.7% and 81.1% respectively in the system; there was no feature points when DO concentrations were 1.0 mg/L, because ammonia has not been completely transformed in a reaction cycle. Test under different concentrations of DO verified further the reproducibility of characteristic points of ORP, revealing that ORP can serve as the control points to judge completion of the transfer of ammonium consequently stopping aeration.
{"title":"Research on Variation of ORP on Operation Period of SBBR One-Stage Completely Autotrophic Nitrogen Removal System","authors":"F. Fang, Hong-huai Wei, Jinsong Guo, Dong-ru Guo, L. Dong","doi":"10.1109/ICEEE.2010.5661169","DOIUrl":"https://doi.org/10.1109/ICEEE.2010.5661169","url":null,"abstract":"To explore the feasibility of ORP as the control parameter of one-stage completely autotrophic nitrogen removal system, this test studied the synthetic low C/N waste water, analyzed the correlation between the variation rule of concentration of ORP and the transfer of nitrogen compounds in system under different concentrations of DO. Results indicated that the ORP curve emerged a turning point when transfer of ammonium finished under the conditions of DO concentrations were 2.0 mg/L and 1.5mg/L respectively, later the rise speed slowed down, at this point TN removal rates were 69.7% and 81.1% respectively in the system; there was no feature points when DO concentrations were 1.0 mg/L, because ammonia has not been completely transformed in a reaction cycle. Test under different concentrations of DO verified further the reproducibility of characteristic points of ORP, revealing that ORP can serve as the control points to judge completion of the transfer of ammonium consequently stopping aeration.","PeriodicalId":6302,"journal":{"name":"2010 International Conference on E-Product E-Service and E-Entertainment","volume":"14 1","pages":"1-4"},"PeriodicalIF":0.0,"publicationDate":"2010-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86155768","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-12-10DOI: 10.1109/ICEEE.2010.5661013
Lianzhi Guo
Multimedia communication networks have a large amount of data to transmit and should have high real-time performance. The requirement of their reliability is different from general computer networks. In this paper a kind of redundant technology based on hierarchical method is proposed. According to the idea of modular design, multimedia communication networks can be considered as two parts: bearing network and edge network. Hierarchical redundant technology is adopted on them, which can solve the problems of bandwidth and high reliability in multimedia communication networks.
{"title":"Research of Redundancy Design of IP Multimedia Communication Network","authors":"Lianzhi Guo","doi":"10.1109/ICEEE.2010.5661013","DOIUrl":"https://doi.org/10.1109/ICEEE.2010.5661013","url":null,"abstract":"Multimedia communication networks have a large amount of data to transmit and should have high real-time performance. The requirement of their reliability is different from general computer networks. In this paper a kind of redundant technology based on hierarchical method is proposed. According to the idea of modular design, multimedia communication networks can be considered as two parts: bearing network and edge network. Hierarchical redundant technology is adopted on them, which can solve the problems of bandwidth and high reliability in multimedia communication networks.","PeriodicalId":6302,"journal":{"name":"2010 International Conference on E-Product E-Service and E-Entertainment","volume":"13 1","pages":"1-4"},"PeriodicalIF":0.0,"publicationDate":"2010-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86512874","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-12-10DOI: 10.1109/ICEEE.2010.5660664
Zi-cai Zhan
This paper introduced a data embedding technology different from traditions.The study is based on visual C++ programming with interface.For convenience of users,It got over traditional defect of embedding technology. This study also produces new ideas in the aspect of precise correction. A more precise TIN-based method is assumed. Using this method, the errors of the corrected image is about one pixel.The technology is implemented based on VC++,and giving key code.
{"title":"A Study of Remote Data Embedding Technology Based on VC++","authors":"Zi-cai Zhan","doi":"10.1109/ICEEE.2010.5660664","DOIUrl":"https://doi.org/10.1109/ICEEE.2010.5660664","url":null,"abstract":"This paper introduced a data embedding technology different from traditions.The study is based on visual C++ programming with interface.For convenience of users,It got over traditional defect of embedding technology. This study also produces new ideas in the aspect of precise correction. A more precise TIN-based method is assumed. Using this method, the errors of the corrected image is about one pixel.The technology is implemented based on VC++,and giving key code.","PeriodicalId":6302,"journal":{"name":"2010 International Conference on E-Product E-Service and E-Entertainment","volume":"1 1","pages":"1-4"},"PeriodicalIF":0.0,"publicationDate":"2010-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86241716","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2010-12-10DOI: 10.1109/ICEEE.2010.5661472
Mingjing Li, Jianli Wang, Lirong Zhao
A key problem of attitude measurement of small- multi-target with high speed is how to decide the optimum of the CMOS stations. A multi-CMOS station mode is designed in this paper, multiple CMOS videos were placed on two parallel sides in measurement system, every two CMOS form an intersection viewing field, multiple viewing field join to cover shooting range, which can augment Effective Viewing Field(EVF) , increase capture ratio of objects with high speed and measurement precision of small objects. When an object passes through the joint area, it will be imaged separately on each CMOS focal plane. Multiple CMOS videos were triggered synchronously, a sequence of image information was extracted, the target attitude was confirmed by digital image processing technology. The merit of station mode is low cost, large measurement scope, extending freely and so on.
{"title":"Station Mode for Attitude Determination of Small-Multi-Target with High Speed","authors":"Mingjing Li, Jianli Wang, Lirong Zhao","doi":"10.1109/ICEEE.2010.5661472","DOIUrl":"https://doi.org/10.1109/ICEEE.2010.5661472","url":null,"abstract":"A key problem of attitude measurement of small- multi-target with high speed is how to decide the optimum of the CMOS stations. A multi-CMOS station mode is designed in this paper, multiple CMOS videos were placed on two parallel sides in measurement system, every two CMOS form an intersection viewing field, multiple viewing field join to cover shooting range, which can augment Effective Viewing Field(EVF) , increase capture ratio of objects with high speed and measurement precision of small objects. When an object passes through the joint area, it will be imaged separately on each CMOS focal plane. Multiple CMOS videos were triggered synchronously, a sequence of image information was extracted, the target attitude was confirmed by digital image processing technology. The merit of station mode is low cost, large measurement scope, extending freely and so on.","PeriodicalId":6302,"journal":{"name":"2010 International Conference on E-Product E-Service and E-Entertainment","volume":"102 21 1","pages":"1-4"},"PeriodicalIF":0.0,"publicationDate":"2010-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86534462","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：